[meta-xilinx] [PATCH 6/7] zcu102-zynqmp: Use 'rev 1.0' U-Boot config and deploy boot.bin

Mike Looijmans mike.looijmans at topic.nl
Mon Oct 9 03:43:23 PDT 2017

On 09-10-17 11:23, Luca Ceresoli wrote:
> Hi Nathan,
> What's the current status of U-Boot SPL on zynqmp? Last time I checked
> it appeared not yet ready for a complete Linux boot, because it cannot
> pass the configuration object to the PMU firmware.
> - Can U-Boot SPL boot a complete Linux without FSBL on zcu102?
> - How much that applies to other zynqmp chips and boards (especially
>    UltraZed)?

I worked around it by building the config object into the pmufw:


The data is already there, all that's needed is a line of code that installs it.

This also gets around the licensing issue, the config object is not GPL 
compatible, so including it into u-boot code poses a challenge in itself.

Kind regards,

Mike Looijmans
System Expert

TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijmans at topicproducts.com
Website: www.topicproducts.com

Please consider the environment before printing this e-mail

Visit us at the Space Tech Expo Europe (Stand E-71)

More information about the meta-xilinx mailing list