[meta-xilinx] microZed using meta-topic

Alan DuBoff aland at softorchestra.com
Sun Mar 23 20:39:05 PDT 2014

On Sun, March 23, 2014 8:22 pm, andrey wrote:
> Alan,
> Oleg did the last updates (to make use of the SPL) and tested it on Microzed,
> ZV706 and our camera board - http://wiki.elphel.com/index.php?title=Ezynq -
> did you try this version? The Yocto_tests page seems to be older but as fas as
> I know meta-ezynq is updated too. Oleg will be able to to provide details
> tomorrow. http://sourceforge.net/p/elphel/ezynq/ci/master/tree/ is definitely
> current and includes the binary images in addition to the source code.
> And regarding other software - I'm now using Eclipse IDE instead of Vivado GUI
> with support of both Vivado and ISE. Here is how it looks like:
> http://sourceforge.net/p/elphel/EclipseVDT/ci/master/tree/doc.vdt_1.1.0/VDT-UserManualAddendum.pdf
> Andrey


I spoke just a tad too soon, and it seems that changing the SRC_URI_uboot =
"https://github.com/Xilinx/u-boot-xlnx.git" does in fact allow it to fetch.
The default git prefix doesn't work. I had been setting it to
"https://github.com/Xilinx/u-boot-xlnx.git;protocol=https" specific, but it
obviously doesn't like it when the protocol is specified.

BTW, as a test, can you clone the u-boot-xlnx repo using the default URI ?

Try it with https, the command line version wants the .git extension. That
works for me.

Then I could fetch, unpack, patch, compile, and finally had a working
u-boot-ezynq, AFAICT.

I built both u-boot-ezynq BSPs for zedboard and microzed.

I need to wrap this project up and hand it over, so I'm hoping this will be a
decent build for all 3 boards.

On question, does the microzed support both the 7Z010 and 7Z020 CPUs ?


More information about the meta-xilinx mailing list