[meta-freescale] [thud][fsl-community-bsp] building a correct sd card image
otavio.salvador at ossystems.com.br
Mon Mar 25 03:34:12 PDT 2019
On Mon, Mar 18, 2019 at 7:34 AM Jean-Michaël Celerier
<jean-michael.celerier at kdab.com> wrote:
> I have done the following procedure to try to build an image for my i.MX6 :
> - get the fsl-community-bsp repository on branch thud
> - run setup-environment like this :
> MACHINE=imx6qdlsabresd DISTRO=fslc-framebuffer ./setup-environment build
> - bitbake core-image-minimal
> - put the built image on a sd card with wic
> The sdcard goes to uboot, but isn't able to boot the linux kernel afterwards
> (it hangs at "Decompressing kernel..." from what I can see).
> I also tried with fsl-image-machine-test with the same result.
> Would anyone know what is going wrong ? The card boots fine with the official
> freescale BSP.
> Here are my variables:
> BB_VERSION = "1.40.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "universal"
> TARGET_SYS = "arm-fslc-linux-gnueabi"
> MACHINE = "imx6qdlsabresd"
> DISTRO = "fslc-framebuffer"
> DISTRO_VERSION = "2.6"
> TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard"
> TARGET_FPU = "hard"
> meta meta-poky = "HEAD:f5a57e939e626a5b7c6de5b51799ca602ed355ed"
> meta-oe meta-multimedia = "HEAD:6ef9657068492d4644079c88f2adee9c3cac9543"
> meta-freescale = "HEAD:6a43f14bce556189cb8e7338148b777ca6f6141a"
> meta-freescale-3rdparty = "HEAD:815df63f9b8997623fe9e23c78de736c25f0a4fd"
> meta-freescale-distro = "HEAD:ef7e7ec8141c5099ba87c766108f698b9cc2e9a0"
Is this being used on sabresd board? or a custom board?
Otavio Salvador O.S. Systems
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale