[meta-freescale] Nothing RPROVIDES 'tiny-init' problemwithpoky-tiny
Kursad Oney CW
koney at mmm.com
Tue Jul 11 05:03:15 PDT 2017
Just to follow up on my own old question here in case someone else runs into the same issue -
I still haven't figured out the cause but at least I found a workaround.
Since the POKY_BBLAYERS_CONF_VERSION variable is only used to migrate from meta-yocto
namespace to meta-poky, I replace meta-yocto with meta-poky in bblayers before baking:
bitbake-layers remove-layer meta-yocto
bitbake-layers add-layer ../sources/poky/meta-poky
BBLAYERS is still set to include meta-yocto (and not meta-poky) in fsl-community-base repo,
even in the latest branches (conf/bblayers.conf). Should it include meta-poky instead?
> Using the poky-tiny distribution and imx6qsabresd with the community BSP (2.1),
> I run into the following issue:
> ERROR: Nothing RPROVIDES 'tiny-init' (but
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'tiny-init' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['tiny-init']
> NOTE: Runtime target 'packagegroup-core-boot' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['packagegroup-core-boot',
> ERROR: Required build target 'core-image-minimal' has no buildable providers.
> Missing or unbuildable dependency chain was: ['core-image-minimal',
> 'packagegroup-core-boot', 'tiny-init']
> Going through the code, to me it seems the issue is related to the
> POKY_BBLAYERS_CONF_VERSION variable that is automatically updated in
> bblayers.conf. This might even be an upstream issue but I'm struggling to
> understand why poky-sanity class does not properly set it. Here are the steps to
> repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b krogoth
> repo sync
> DISTRO=poky-tiny source setup-environment build
> # edit sources/poky/meta-poky/conf/distro/poky-tiny.conf and make the following
> # change:
> -PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny"
> -PREFERRED_VERSION_linux-yocto-tiny ?= "4.4%"
> +PREFERRED_PROVIDER_virtual/kernel = "linux-fslc-imx"
> bitbake core-image-minimal
> After running bitbake, my bblayers.conf is updated with the following line:
> POKY_BBLAYERS_CONF_VERSION = "1"
> However, the poky layer (poky/meta-poky/conf/layer.conf) requires the version to
> be "2". It looks like this automatic change is performed by
> poky/meta/classes/sanity.bbclass but since I'm using poky-tiny, which requires
> poky.conf, which INHERITs poky-sanity class, the variable should be set to "2"
> by the poky_update_bblayersconf function. This does not seem to happen and I
> cannot figure out why. Any thoughts?
More information about the meta-freescale