[meta-freescale] Problem booting fsl-image-gui with imx6qsabrelite

Federico Vitali fede.vitali at gmail.com
Thu Mar 6 04:36:59 PST 2014


I have built a fsl-image-gui (poky dora) for imx6qsabrelite. I have
followed the instruction
to burn the sdcard image ona micro sd.

On boot I get the following errors:

U-Boot 2009.08 (Jul 05 2012 - 15:37:27)

CPU:   Freescale i.MX 6 family 0.0V at 792 MHz
Temperature:   can't get valid data!
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 264000000Hz
emi_slow clock: 29333333Hz
ddr clock     : 528000000Hz
usdhc1 clock  : 200000000Hz
usdhc2 clock  : 200000000Hz
usdhc3 clock  : 200000000Hz
usdhc4 clock  : 200000000Hz
nfc clock     : 24000000Hz
I2C:   ready
DRAM:   1 GB
JEDEC ID: 0xbf:0x25:0x41
Reading SPI NOR flash 0xc0000 [0x2000 bytes] -> ram 0x276009b8

In:    serial
Out:   serial
Err:   serial
Net:   got MAC address from IIM: 00:19:b8:00:fd:74
Warning: FEC0 MAC addresses don't match:
Address in SROM is         00:19:b8:00:fd:74
Address in environment is  00:01:02:03:04:05

Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc0(part 0) is current device
MMC: block number 0x1 exceeds max(0x0)
** Can't read from device 0 **

** Unable to use mmc 0:1 for fatload **
** Bad partition 1 **
mmc1 is current device
reading /6q_bootscript

** Unable to read "/6q_bootscript" from mmc 1:1 **
Loading file "/6q_bootscript" from mmc device 1:1 (xxb1)
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 1:1 **

What could be the problem? I've also tried with different images, but
without success.

Thank you in advance

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140306/6d239b40/attachment.html>

More information about the meta-freescale mailing list