[meta-freescale] mxc_v4l2_capture sometimes not being modprobed
rjohnweber at gmail.com
Thu Jun 5 11:05:37 PDT 2014
On 6/5/14, 12:34 PM, Otavio Salvador wrote:
> On Mon, May 26, 2014 at 12:42 AM, John Weber <rjohnweber at gmail.com> wrote:
>> I'm seeing a behavior that I can't easily explain. I'm not seeing the
>> mxc_v4l2_capture drivers and dependent ipu drivers being automatically
>> modprobed on Wandboard during a majority of system startups (but not all).
>> I was under the impression that this should be done by udev, but for some
>> reason it seems to either fail or is skipped.
>> I can force the driver to be loaded at startup by adding the name of the
>> driver in a line in /etc/modules. This works to load the driver every time
>> at startup, but I'm fairly certain that this is not the most ideal approach
>> because (A) I have to write a recipe to make the change to /etc/modules and
>> (B) it does not explain why the driver load works sometimes, but not all of
>> the time.
>> Any ideas?
> Does this happens with 3.0.35 and 3.10.17?
I did notice it on both kernels. From what I've been able to gather after
sending this email, the modules load at first boot on a freshly burned rootfs
(that hasn't been postinst'd). After that, SW and HW resets and POR to not
result in loaded mxc_v4l2_capture module or its dependencies. I do have other
modules loaded, however, all the time - the ov5640_mipi driver and the Broadcom
WLAN drivers load without fail.
I suspect it could be a sequencing problem, but adding the line to /etc/modules
More information about the meta-freescale