[meta-freescale] Booting 3.5.7 kernel on imx6sabresd?
festevam at gmail.com
Wed Jan 22 07:10:03 PST 2014
On Wed, Jan 22, 2014 at 1:06 PM, randy.krakora at freescale.com
<randy.krakora at freescale.com> wrote:
> Ok, so I found the prebuilt images for my board here:
> I burned a card with one - core-image-minimal-imx6qsabresd.sdcard. It seemed to work to boot the kernel, so I copied my kernel and .dtb file to that card and it booted as shown below.
> reading boot.scr
> ** Unable to read file boot.scr **
> reading uImage
> 4667456 bytes read in 215 ms (20.7 MiB/s)
> Booting from mmc ...
> reading imx6q-sabresd.dtb
> 46128 bytes read in 20 ms (2.2 MiB/s)
> ## Booting kernel from Legacy Image at 12000000 ...
> Image Name: Linux-3.5.7-1.0.0+3285970
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4667392 Bytes = 4.5 MiB
> Load Address: 10008000
> Entry Point: 10008000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at 11000000
> Booting using the fdt blob at 0x11000000
> Loading Kernel Image ... OK
> Using Device Tree in place at 11000000, end 1100e42f
> Starting kernel ...
> <Hung here for many minutes>
Ok, ,at least now you don't get the CRC kernel error.
Try doing this in the U-boot prompt:
=> setenv fdt_addr 0x18000000
More information about the meta-freescale