[meta-freescale] u-boot USB option for SABRE SD.
festevam at gmail.com
Wed Mar 6 18:33:29 PST 2013
On Wed, Mar 6, 2013 at 9:43 AM, Juha Vuorivirta
<jvp.vuorivirta at gmail.com> wrote:
> I have SABRE SD board with iMX6q processor and I'm using Yoctoproject for
> compiling images for it. I would like to boot board from USB stick, we have
> adapter for connector J505 and I can see stick as /media/sda1 in board. In
> future, we are planning to develop custom board with iMX6Q processor with
> USB boot and have SABRE board for preliminary tests. I used this guide
> https://github.com/Freescale/fsl-community-bsp-platform to get started and
> SD card boot goes fine. U-boot version is u-boot-fslc-v2012.10-r4.
> I can't see usb when using 'help' in u-boot console because it's not
Take a look at include/configs/mx6qsabrelite.h ,as this board support
USB in U-boot.
Please note that you can connect a USB thumb drive, or a USB to
Ethernet adapter, but the boot media is SPI NOR or eMMC.
More information about the meta-freescale