Hi, I am new to yocto and have some problems by installing a SDK with yocto for AArch64. The SDK you can find here: https://www.baumer.com/ch/de/produktubersicht/industriekameras-bildverarbeitung/soft

I am running with zeus…, during kernel startup I see perf-monitors setup [ 3.564635] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM [ 3.571139] xilinx-axipmon fd0b0000.perf-monitor: Probed Xi

From: Marco Cavallini <m.cavallini@...> Was yocto@... and now is yocto@... Signed-off-by: Marco Cavallini <koansoftware@...> --- MAINTAINERS | 2 +- README.md | 4 ++++ 2 files changed, 5 insertions(+),

From: Marco Cavallini <m.cavallini@...> Signed-off-by: Marco Cavallini <koansoftware@...> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS in

A build flagged for QA (yocto-3.3.2.rc2) was completed on the autobuilder and is available at: https://autobuilder.yocto.io/pub/releases/yocto-3.3.2.rc2 Build hash information: bitbake: 731fb52eb03338

A build flagged for QA (yocto-3.1.10.rc1) was completed on the autobuilder and is available at: https://autobuilder.yocto.io/pub/releases/yocto-3.1.10.rc1 Build hash information: bitbake: 0e0af15b84e0

Hi Guys, I am facing below error while compiling consul package. can anybody know this issue please suggest me. ERROR: consul-git-r0 do_compile: Execution of '/home/sources/fu540-build/tmp-glibc/work/

After modify recipe with using my repo I have this error after rebuild. How to resolve this ? log: ERROR: phosphor-user-manager-1.0+gitAUTOINC+5a6e836a71-r1 do_package: QA Issue: phosphor-user-manager

They dropped the dev branch for rel. Update to tip. Refresh patches Signed-off-by: Armin Kuster <akuster808@...> --- recipes-scanners/clamav/clamav_0.104.0.bb | 6 +++--- recipes-scanners/clamav/files/

Signed-off-by: Armin Kuster <akuster808@...> --- .../krill/files/panic_workaround.patch | 16 + .../recipes-security/krill/krill.inc | 325 ++++++++++++++++++ .../recipes-security/krill/krill_0.9.1.bb |

Up till now ptest-runner2 returns number of failed tests with its exit status code. Such use case is not recommended [1] and may cause issues when there are more than 256 tests to be executed. To alle

To help with the conversion, switch the core configurations to use the new syntax since this allows testing with the new syntax only. Signed-off-by: Richard Purdie <richard.purdie@...> --- config.json

From: Marco Cavallini <m.cavallini@...> With the previous code was impossible to run the do_get_report task whenever a correspondent .spdx file was already present in tmp/deploy/spdx. Now the check if

From: Marco Cavallini <m.cavallini@...> With the previous code was impossible to run the do_get_report task whenever a correspondent .spdx file was already present in tmp/deploy/spdx. Removed the chec

drop libseccomp ptest Signed-off-by: Armin Kuster <akuster808@...> --- recipes-core/packagegroup/packagegroup-core-security.bb | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/recip

Signed-off-by: Armin Kuster <akuster808@...> --- recipes-ids/crowdsec/crowdsec_1.1.1.bb | 42 ++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 recipes-ids/crowdsec/crowdse

When I build a sato image I am facing an issue with gdk-pixbuf (as shown below), but when I build the same image without inheriting the meta-spdxscanner, it works fine. I see a problem with the SPDX g

The latest updates to linux-yocto-dev now include support for the rock-pi-e so do away with our custom recipe and use the one from oe-core. Signed-off-by: Trevor Woerner <twoerner@...> --- conf/machin

Adding "-rockchip" to the Linux kernel name implies, to me anyway, that this is a vendor kernel. The PREFERRED_PROVIDERs of all kernels specified in this BSP are upstream linux-yocto kernels, not vend

Resend: The list: Yocto discussion list <yocto@...> didn't work and may be dead so switch to: yocto@... <yocto@...> ../Randy YP AB Intermittent failures meeting =================================== Jul