Topics

Updating to Zeus with zcu102

Emily
 

Hi all - 

I am in the process of attempting to update from rocko -> zeus, which is perhaps a bit ambitious considering I'm skipping quite a few releases. 

I have a custom layer here: and was able to build core-image-minimal with rocko as well as a custom image (core-image-gfex) for the xilinx zcu102 board. Unfortunately after switching all the repos to zeus I can't get core-image-minimal to build for the zcu102.

I've attached the full log, but I seem to be getting an error with the u-boot and/or pmu build: 

Cannot read ../../../../../../pmutmp/deploy/images/zynqmp-pmu/pmu-firmware-zynqmp-pmu.bin

And then also with the spl: 

/local/d6/easmith5/zeus_bitbake/poky/build/tmp/work/zcu102_zynqmp-poky-linux/u-boot-xlnx/v2019.01-xilinx-v2019.2+gitAUTOINC+dc61275b1d-r0/git/Makefile:1653: recipe for target 'spl/u-boot-spl' failed             make[1]: *** [spl/u-boot-spl] Error 2 

Am I missing something obvious in terms of building with an existing image and existing machine conf with zeus? 

Thanks,
Emily Smith