Error while testing "core-image-minimal" through "bitbake core-image-minimal -c testimage -v" #linux #warning #toolchain #bitbake #dunfell


Nikita Gupta
 

Hello All,
I was testing my core-image-minimal with test-suit and getting error like "need terminal to enter password and set-up tap interface" i am getting few error so i am not able to test my image . 
I have run following command in  order to test my image

bitbake rpm busybox curl run-postinsts
bitbake package-index
bitbake core-image-minimal -c testimage -v

I am getting following error after running last comand . I am also attaching log file here(see attached file )

ERROR: runqemu exited with code 1
ERROR: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
KERNEL: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/bzImage--5.4.190+gitAUTOINC+6a12bea731_d9d6c6e0d0-r0-qemux86-64-20220501184705.bin]
MACHINE: [qemux86-64]
FSTYPE: [ext4]
ROOTFS: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4]
CONFFILE: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf]
 
runqemu - INFO - Setting up tap interface under sudo
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required
runqemu - ERROR - Setting up tap device failed:
Command '('sudo', '/home/nikita/yoctoproject/poky/scripts/runqemu-ifup', '1000', '1000', '/home/nikita/yoctoproject/poky/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin')' returned non-zero exit status 1.
Run runqemu-gen-tapdevs to manually create one.
runqemu - INFO - Cleaning up
[?7h
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:
 
WARNING: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207171341_qemu
DEBUG: Sending SIGTERM to runqemu
DEBUG: Sending SIGTERM to runqemu
ERROR: Error executing a python function in exec_func_python() autogenerated:
 
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
     0001:
 *** 0002:do_testimage(d)
     0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
     0125:    netstat -an
     0126:}
     0127:
     0128:python do_testimage() {
 *** 0129:    testimage_main(d)
     0130:}
     0131:
     0132:addtask testimage
     0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
     0370:    orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
     0371:    try:
     0372:        # We need to check if runqemu ends unexpectedly
     0373:        # or if the worker send us a SIGTERM
 *** 0374:        tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
     0375:        import threading
     0376:        try:
     0377:            threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
     0378:        except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
     0063:            if self.runner.server_ip:
     0064:                self.server_ip = self.runner.server_ip
     0065:        else:
     0066:            self.stop()
 *** 0067:            raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
     0068:
     0069:    def stop(self):
     0070:        self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log
 
DEBUG: Python function do_testimage finished

If anyone can help then please do your help will be appreciated . Thanks in advance 


Alexander Kanavin
 

The key message is:

Command '('sudo',
'/home/nikita/yoctoproject/poky/scripts/runqemu-ifup', '1000', '1000',
'/home/nikita/yoctoproject/poky/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin')'
returned non-zero exit status 1.
Run runqemu-gen-tapdevs to manually create one.

So you need to run the first command to create a single tap interface
manually (and you need to know the root password). Or
runqemu-gen-tapdevs will generate several.

Alex

On Sun, 17 Jul 2022 at 10:24, Nikita Gupta <nikitagupta2509@...> wrote:

Hello All,
I was testing my core-image-minimal with test-suit and getting error like "need terminal to enter password and set-up tap interface" i am getting few error so i am not able to test my image .
I have run following command in order to test my image

bitbake rpm busybox curl run-postinsts
bitbake package-index
bitbake core-image-minimal -c testimage -v

I am getting following error after running last comand . I am also attaching log file here(see attached file )

ERROR: runqemu exited with code 1
ERROR: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
KERNEL: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/bzImage--5.4.190+gitAUTOINC+6a12bea731_d9d6c6e0d0-r0-qemux86-64-20220501184705.bin]
MACHINE: [qemux86-64]
FSTYPE: [ext4]
ROOTFS: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4]
CONFFILE: [/home/nikita/yoctoproject/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf]

runqemu - INFO - Setting up tap interface under sudo
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required
runqemu - ERROR - Setting up tap device failed:
Command '('sudo', '/home/nikita/yoctoproject/poky/scripts/runqemu-ifup', '1000', '1000', '/home/nikita/yoctoproject/poky/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin')' returned non-zero exit status 1.
Run runqemu-gen-tapdevs to manually create one.
runqemu - INFO - Cleaning up
[?7h
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:

WARNING: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207171341_qemu
DEBUG: Sending SIGTERM to runqemu
DEBUG: Sending SIGTERM to runqemu
ERROR: Error executing a python function in exec_func_python() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testimage(d)
0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
0125: netstat -an
0126:}
0127:
0128:python do_testimage() {
*** 0129: testimage_main(d)
0130:}
0131:
0132:addtask testimage
0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
0370: orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
0371: try:
0372: # We need to check if runqemu ends unexpectedly
0373: # or if the worker send us a SIGTERM
*** 0374: tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
0375: import threading
0376: try:
0377: threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
0378: except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
0063: if self.runner.server_ip:
0064: self.server_ip = self.runner.server_ip
0065: else:
0066: self.stop()
*** 0067: raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
0068:
0069: def stop(self):
0070: self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log

DEBUG: Python function do_testimage finished

If anyone can help then please do your help will be appreciated . Thanks in advance



Nikita Gupta
 

Hello Alexander, 

Thanks for your precious time . 

I applied you suggestion and it worked and i setup tap interface with following command:

sudo /home/nikita/yoctoproject/poky/scripts/runqemu-gen-tapdevs 1000 1000 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
but after that i am getting some warning like fail to start qemu and after that i am getting errors which is due to failure in starting qemu: 

WARNING: core-image-minimal-1.0-r0 do_testimage: Last 25 lines of text:
[    2.372775] Key type asymmetric registered
[    2.375200] Asymmetric key parser 'x509' registered
[    2.389021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.389290] io scheduler mq-deadline registered
[    2.389459] io scheduler kyber registered
[    2.389570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.405464] ACPI: Power Button [PWRF]
[    2.659671] PCI Interrupt Link [LNKC] enabled at IRQ 10
[    3.142802] PCI Interrupt Link [LNKA] enabled at IRQ 10
[    3.146178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.187185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.229110] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.250602] Linux agpgart interface v0.103
[    3.258767] crng init done
[    3.262616] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdffffff
[    3.266483] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebd0fff
[    3.267730] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[    3.270600] Console: switching to colour dummy device 80x25
[    3.274496] [drm] Found bochs VGA, ID 0xb0c0.
[    3.275895] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    3.279874] [TTM] Zone  kernel: Available graphics memory: 116092 KiB
[    3.299694] [TTM] Initializing pool allocator
[    3.299943] [TTM] Initializing DMA pool allocator
[    3.300480] [drm] Found EDID data blob.
[    3.312971] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
WARNING: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20220719154118
WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207192111_qemu
WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly
Output from runqemu:
runqemu - ERROR - Failed to run qemu: X Error:  BadValue
  Request Major code 130 (MIT-SHM)
  Request Minor code 3 ()
  Value 0x3bc
  Error Serial #2663
  Current Serial #2664
 
runqemu - INFO - Cleaning up
 
ERROR: core-image-minimal-1.0-r0 do_testimage: Error executing a python function in exec_func_python() autogenerated:
 
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
     0001:
 *** 0002:do_testimage(d)
     0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
     0125:    netstat -an
     0126:}
     0127:
     0128:python do_testimage() {
 *** 0129:    testimage_main(d)
     0130:}
     0131:
     0132:addtask testimage
     0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
     0370:    orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
     0371:    try:
     0372:        # We need to check if runqemu ends unexpectedly
     0373:        # or if the worker send us a SIGTERM
 *** 0374:        tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
     0375:        import threading
     0376:        try:
     0377:            threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
     0378:        except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
     0063:            if self.runner.server_ip:
     0064:                self.server_ip = self.runner.server_ip
     0065:        else:
     0066:            self.stop()
 *** 0067:            raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
     0068:
     0069:    def stop(self):
     0070:        self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log
 
ERROR: Logfile of failure stored in: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_testimage.7780
ERROR: Task (/home/nikita/yoctoproject/poky/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1'
 
 


Alexander Kanavin
 

You can try adding nographic option to runqemu if you do not need to
see graphical output from your image.

Alex

On Tue, 19 Jul 2022 at 20:30, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander,

Thanks for your precious time .

I applied you suggestion and it worked and i setup tap interface with following command:

sudo /home/nikita/yoctoproject/poky/scripts/runqemu-gen-tapdevs 1000 1000 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
but after that i am getting some warning like fail to start qemu and after that i am getting errors which is due to failure in starting qemu:

WARNING: core-image-minimal-1.0-r0 do_testimage: Last 25 lines of text:
[ 2.372775] Key type asymmetric registered
[ 2.375200] Asymmetric key parser 'x509' registered
[ 2.389021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.389290] io scheduler mq-deadline registered
[ 2.389459] io scheduler kyber registered
[ 2.389570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.405464] ACPI: Power Button [PWRF]
[ 2.659671] PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.142802] PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.146178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.187185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.229110] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.250602] Linux agpgart interface v0.103
[ 3.258767] crng init done
[ 3.262616] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdffffff
[ 3.266483] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebd0fff
[ 3.267730] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[ 3.270600] Console: switching to colour dummy device 80x25
[ 3.274496] [drm] Found bochs VGA, ID 0xb0c0.
[ 3.275895] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 3.279874] [TTM] Zone kernel: Available graphics memory: 116092 KiB
[ 3.299694] [TTM] Initializing pool allocator
[ 3.299943] [TTM] Initializing DMA pool allocator
[ 3.300480] [drm] Found EDID data blob.
[ 3.312971] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
WARNING: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20220719154118
WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207192111_qemu
WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly
Output from runqemu:
runqemu - ERROR - Failed to run qemu: X Error: BadValue
Request Major code 130 (MIT-SHM)
Request Minor code 3 ()
Value 0x3bc
Error Serial #2663
Current Serial #2664

runqemu - INFO - Cleaning up

ERROR: core-image-minimal-1.0-r0 do_testimage: Error executing a python function in exec_func_python() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testimage(d)
0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
0125: netstat -an
0126:}
0127:
0128:python do_testimage() {
*** 0129: testimage_main(d)
0130:}
0131:
0132:addtask testimage
0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
0370: orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
0371: try:
0372: # We need to check if runqemu ends unexpectedly
0373: # or if the worker send us a SIGTERM
*** 0374: tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
0375: import threading
0376: try:
0377: threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
0378: except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
0063: if self.runner.server_ip:
0064: self.server_ip = self.runner.server_ip
0065: else:
0066: self.stop()
*** 0067: raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
0068:
0069: def stop(self):
0070: self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log

ERROR: Logfile of failure stored in: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_testimage.7780
ERROR: Task (/home/nikita/yoctoproject/poky/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1'





Nikita Gupta
 

Hello Alexander

Yes I have tried that already but i am getting same error.
 If anyone could it would be great. 

Thanks in advance

On Wed, Jul 20, 2022, 00:03 Alexander Kanavin <alex.kanavin@...> wrote:
You can try adding nographic option to runqemu if you do not need to
see graphical output from your image.

Alex

On Tue, 19 Jul 2022 at 20:30, Nikita Gupta <nikitagupta2509@...> wrote:
>
> Hello Alexander,
>
> Thanks for your precious time .
>
> I applied you suggestion and it worked and i setup tap interface with following command:
>
> sudo /home/nikita/yoctoproject/poky/scripts/runqemu-gen-tapdevs 1000 1000 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
> but after that i am getting some warning like fail to start qemu and after that i am getting errors which is due to failure in starting qemu:
>
> WARNING: core-image-minimal-1.0-r0 do_testimage: Last 25 lines of text:
> [    2.372775] Key type asymmetric registered
> [    2.375200] Asymmetric key parser 'x509' registered
> [    2.389021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
> [    2.389290] io scheduler mq-deadline registered
> [    2.389459] io scheduler kyber registered
> [    2.389570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [    2.405464] ACPI: Power Button [PWRF]
> [    2.659671] PCI Interrupt Link [LNKC] enabled at IRQ 10
> [    3.142802] PCI Interrupt Link [LNKA] enabled at IRQ 10
> [    3.146178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [    3.187185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [    3.229110] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> [    3.250602] Linux agpgart interface v0.103
> [    3.258767] crng init done
> [    3.262616] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdffffff
> [    3.266483] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebd0fff
> [    3.267730] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
> [    3.270600] Console: switching to colour dummy device 80x25
> [    3.274496] [drm] Found bochs VGA, ID 0xb0c0.
> [    3.275895] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
> [    3.279874] [TTM] Zone  kernel: Available graphics memory: 116092 KiB
> [    3.299694] [TTM] Initializing pool allocator
> [    3.299943] [TTM] Initializing DMA pool allocator
> [    3.300480] [drm] Found EDID data blob.
> [    3.312971] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
> WARNING: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20220719154118
> WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207192111_qemu
> WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly
> Output from runqemu:
> runqemu - ERROR - Failed to run qemu: X Error:  BadValue
>   Request Major code 130 (MIT-SHM)
>   Request Minor code 3 ()
>   Value 0x3bc
>   Error Serial #2663
>   Current Serial #2664
>
> runqemu - INFO - Cleaning up
>
> ERROR: core-image-minimal-1.0-r0 do_testimage: Error executing a python function in exec_func_python() autogenerated:
>
> The stack trace of python calls that resulted in this exception/failure was:
> File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
>      0001:
>  *** 0002:do_testimage(d)
>      0003:
> File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
>      0125:    netstat -an
>      0126:}
>      0127:
>      0128:python do_testimage() {
>  *** 0129:    testimage_main(d)
>      0130:}
>      0131:
>      0132:addtask testimage
>      0133:do_testimage[nostamp] = "1"
> File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
>      0370:    orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
>      0371:    try:
>      0372:        # We need to check if runqemu ends unexpectedly
>      0373:        # or if the worker send us a SIGTERM
>  *** 0374:        tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
>      0375:        import threading
>      0376:        try:
>      0377:            threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
>      0378:        except ValueError:
> File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
>      0063:            if self.runner.server_ip:
>      0064:                self.server_ip = self.runner.server_ip
>      0065:        else:
>      0066:            self.stop()
>  *** 0067:            raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
>      0068:
>      0069:    def stop(self):
>      0070:        self.runner.stop()
> Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log
>
> ERROR: Logfile of failure stored in: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_testimage.7780
> ERROR: Task (/home/nikita/yoctoproject/poky/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1'
>
>
>
>
>


Alexander Kanavin
 

Can I see the output of 'env' please?

Alex

On Tue, 19 Jul 2022 at 20:45, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander

Yes I have tried that already but i am getting same error.
If anyone could it would be great.

Thanks in advance

On Wed, Jul 20, 2022, 00:03 Alexander Kanavin <alex.kanavin@...> wrote:

You can try adding nographic option to runqemu if you do not need to
see graphical output from your image.

Alex

On Tue, 19 Jul 2022 at 20:30, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander,

Thanks for your precious time .

I applied you suggestion and it worked and i setup tap interface with following command:

sudo /home/nikita/yoctoproject/poky/scripts/runqemu-gen-tapdevs 1000 1000 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
but after that i am getting some warning like fail to start qemu and after that i am getting errors which is due to failure in starting qemu:

WARNING: core-image-minimal-1.0-r0 do_testimage: Last 25 lines of text:
[ 2.372775] Key type asymmetric registered
[ 2.375200] Asymmetric key parser 'x509' registered
[ 2.389021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.389290] io scheduler mq-deadline registered
[ 2.389459] io scheduler kyber registered
[ 2.389570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.405464] ACPI: Power Button [PWRF]
[ 2.659671] PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.142802] PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.146178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.187185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.229110] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.250602] Linux agpgart interface v0.103
[ 3.258767] crng init done
[ 3.262616] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdffffff
[ 3.266483] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebd0fff
[ 3.267730] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[ 3.270600] Console: switching to colour dummy device 80x25
[ 3.274496] [drm] Found bochs VGA, ID 0xb0c0.
[ 3.275895] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 3.279874] [TTM] Zone kernel: Available graphics memory: 116092 KiB
[ 3.299694] [TTM] Initializing pool allocator
[ 3.299943] [TTM] Initializing DMA pool allocator
[ 3.300480] [drm] Found EDID data blob.
[ 3.312971] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
WARNING: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20220719154118
WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207192111_qemu
WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly
Output from runqemu:
runqemu - ERROR - Failed to run qemu: X Error: BadValue
Request Major code 130 (MIT-SHM)
Request Minor code 3 ()
Value 0x3bc
Error Serial #2663
Current Serial #2664

runqemu - INFO - Cleaning up

ERROR: core-image-minimal-1.0-r0 do_testimage: Error executing a python function in exec_func_python() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testimage(d)
0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
0125: netstat -an
0126:}
0127:
0128:python do_testimage() {
*** 0129: testimage_main(d)
0130:}
0131:
0132:addtask testimage
0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
0370: orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
0371: try:
0372: # We need to check if runqemu ends unexpectedly
0373: # or if the worker send us a SIGTERM
*** 0374: tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
0375: import threading
0376: try:
0377: threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
0378: except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
0063: if self.runner.server_ip:
0064: self.server_ip = self.runner.server_ip
0065: else:
0066: self.stop()
*** 0067: raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
0068:
0069: def stop(self):
0070: self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log

ERROR: Logfile of failure stored in: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_testimage.7780
ERROR: Task (/home/nikita/yoctoproject/poky/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1'







Khem Raj
 

maybe you should reboot the host machine, sometimes system updates
without rebooting the machine can also result in such errors.

On Tue, Jul 19, 2022 at 2:30 PM Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander,

Thanks for your precious time .

I applied you suggestion and it worked and i setup tap interface with following command:

sudo /home/nikita/yoctoproject/poky/scripts/runqemu-gen-tapdevs 1000 1000 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
but after that i am getting some warning like fail to start qemu and after that i am getting errors which is due to failure in starting qemu:

WARNING: core-image-minimal-1.0-r0 do_testimage: Last 25 lines of text:
[ 2.372775] Key type asymmetric registered
[ 2.375200] Asymmetric key parser 'x509' registered
[ 2.389021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.389290] io scheduler mq-deadline registered
[ 2.389459] io scheduler kyber registered
[ 2.389570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.405464] ACPI: Power Button [PWRF]
[ 2.659671] PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.142802] PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.146178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.187185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.229110] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.250602] Linux agpgart interface v0.103
[ 3.258767] crng init done
[ 3.262616] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdffffff
[ 3.266483] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebd0fff
[ 3.267730] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[ 3.270600] Console: switching to colour dummy device 80x25
[ 3.274496] [drm] Found bochs VGA, ID 0xb0c0.
[ 3.275895] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 3.279874] [TTM] Zone kernel: Available graphics memory: 116092 KiB
[ 3.299694] [TTM] Initializing pool allocator
[ 3.299943] [TTM] Initializing DMA pool allocator
[ 3.300480] [drm] Found EDID data blob.
[ 3.312971] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
WARNING: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20220719154118
WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /home/nikita/yoctoproject/poky/build/tmp/log/runtime-hostdump/202207192111_qemu
WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly
Output from runqemu:
runqemu - ERROR - Failed to run qemu: X Error: BadValue
Request Major code 130 (MIT-SHM)
Request Minor code 3 ()
Value 0x3bc
Error Serial #2663
Current Serial #2664

runqemu - INFO - Cleaning up

ERROR: core-image-minimal-1.0-r0 do_testimage: Error executing a python function in exec_func_python() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testimage(d)
0003:
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 129, function: do_testimage
0125: netstat -an
0126:}
0127:
0128:python do_testimage() {
*** 0129: testimage_main(d)
0130:}
0131:
0132:addtask testimage
0133:do_testimage[nostamp] = "1"
File: '/home/nikita/yoctoproject/poky/meta/classes/testimage.bbclass', lineno: 374, function: testimage_main
0370: orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
0371: try:
0372: # We need to check if runqemu ends unexpectedly
0373: # or if the worker send us a SIGTERM
*** 0374: tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
0375: import threading
0376: try:
0377: threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
0378: except ValueError:
File: '/home/nikita/yoctoproject/poky/meta/lib/oeqa/core/target/qemu.py', lineno: 67, function: start
0063: if self.runner.server_ip:
0064: self.server_ip = self.runner.server_ip
0065: else:
0066: self.stop()
*** 0067: raise RuntimeError("FAILED to start qemu - check the task log and the boot log")
0068:
0069: def stop(self):
0070: self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log

ERROR: Logfile of failure stored in: /home/nikita/yoctoproject/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_testimage.7780
ERROR: Task (/home/nikita/yoctoproject/poky/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1'





Nikita Gupta
 

Hello Khem Raj ,

After rebooting i am getting same error .


Nikita Gupta
 

Hello Alexander, 

Please find the output file in attachment .

Thanks 


Alexander Kanavin
 

This is not what I asked for (which was output of 'env'). Also, this
shows the output of bitbake -c testimage, not of runqemu with
nographic parameter.

Alex

On Wed, 20 Jul 2022 at 09:07, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander,

Please find the output file in attachment .

Thanks


Nikita Gupta
 

Hello Alexander

Please find the output of 'env' below .

SHELL=/bin/bash
SESSION_MANAGER=local/Linux:@/tmp/.ICE-unix/1288,unix/Linux:/tmp/.ICE-unix/1288
QT_ACCESSIBILITY=1
COLORTERM=truecolor
XDG_CONFIG_DIRS=/etc/xdg/xdg-ubuntu:/etc/xdg
SSH_AGENT_LAUNCHER=gnome-keyring
XDG_MENU_PREFIX=gnome-
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
LANGUAGE=en_IN:en
GNOME_SHELL_SESSION_MODE=ubuntu
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
XMODIFIERS=@im=ibus
DESKTOP_SESSION=ubuntu
GTK_MODULES=gail:atk-bridge
PWD=/home/nikita/yoctoproject/poky/build
LOGNAME=nikita
XDG_SESSION_DESKTOP=ubuntu
XDG_SESSION_TYPE=x11
GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
SYSTEMD_EXEC_PID=1439
XAUTHORITY=/run/user/1000/gdm/Xauthority
WINDOWPATH=2
HOME=/home/nikita
USERNAME=nikita
IM_CONFIG_PHASE=1
LANG=en_IN
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:
XDG_CURRENT_DESKTOP=ubuntu:GNOME
VTE_VERSION=6402
GNOME_TERMINAL_SCREEN=/org/gnome/Terminal/screen/7cf77da7_bb58_4735_9e5a_bfd6073b4d65
BBPATH=/home/nikita/yoctoproject/poky/build
BB_ENV_EXTRAWHITE=ALL_PROXY BBPATH_EXTRA BB_LOGCONFIG BB_NO_NETWORK BB_NUMBER_THREADS BB_SETSCENE_ENFORCE BB_SRCREV_POLICY DISTRO FTPS_PROXY FTP_PROXY GIT_PROXY_COMMAND HTTPS_PROXY HTTP_PROXY MACHINE NO_PROXY PARALLEL_MAKE SCREENDIR SDKMACHINE SOCKS5_PASSWD SOCKS5_USER SSH_AGENT_PID SSH_AUTH_SOCK STAMPS_DIR TCLIBC TCMODE all_proxy ftp_proxy ftps_proxy http_proxy https_proxy no_proxy 
LESSCLOSE=/usr/bin/lesspipe %s %s
XDG_SESSION_CLASS=user
TERM=xterm-256color
LESSOPEN=| /usr/bin/lesspipe %s
USER=nikita
GNOME_TERMINAL_SERVICE=:1.73
DISPLAY=:1
SHLVL=1
QT_IM_MODULE=ibus
XDG_RUNTIME_DIR=/run/user/1000
XDG_DATA_DIRS=/usr/share/ubuntu:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
PATH=/home/nikita/yoctoproject/poky/scripts:/home/nikita/yoctoproject/poky/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin
GDMSESSION=ubuntu
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
BUILDDIR=/home/nikita/yoctoproject/poky/build
OLDPWD=/home/nikita/yoctoproject/poky
_=/usr/bin/env
 


Alexander Kanavin
 

Can I also see the output of 'runqemu nographic' please?

Alex

On Wed, 20 Jul 2022 at 12:25, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander

Please find the output of 'env' below .

SHELL=/bin/bash
SESSION_MANAGER=local/Linux:@/tmp/.ICE-unix/1288,unix/Linux:/tmp/.ICE-unix/1288
QT_ACCESSIBILITY=1
COLORTERM=truecolor
XDG_CONFIG_DIRS=/etc/xdg/xdg-ubuntu:/etc/xdg
SSH_AGENT_LAUNCHER=gnome-keyring
XDG_MENU_PREFIX=gnome-
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
LANGUAGE=en_IN:en
GNOME_SHELL_SESSION_MODE=ubuntu
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
XMODIFIERS=@im=ibus
DESKTOP_SESSION=ubuntu
GTK_MODULES=gail:atk-bridge
PWD=/home/nikita/yoctoproject/poky/build
LOGNAME=nikita
XDG_SESSION_DESKTOP=ubuntu
XDG_SESSION_TYPE=x11
GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
SYSTEMD_EXEC_PID=1439
XAUTHORITY=/run/user/1000/gdm/Xauthority
WINDOWPATH=2
HOME=/home/nikita
USERNAME=nikita
IM_CONFIG_PHASE=1
LANG=en_IN
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:
XDG_CURRENT_DESKTOP=ubuntu:GNOME
VTE_VERSION=6402
GNOME_TERMINAL_SCREEN=/org/gnome/Terminal/screen/7cf77da7_bb58_4735_9e5a_bfd6073b4d65
BBPATH=/home/nikita/yoctoproject/poky/build
BB_ENV_EXTRAWHITE=ALL_PROXY BBPATH_EXTRA BB_LOGCONFIG BB_NO_NETWORK BB_NUMBER_THREADS BB_SETSCENE_ENFORCE BB_SRCREV_POLICY DISTRO FTPS_PROXY FTP_PROXY GIT_PROXY_COMMAND HTTPS_PROXY HTTP_PROXY MACHINE NO_PROXY PARALLEL_MAKE SCREENDIR SDKMACHINE SOCKS5_PASSWD SOCKS5_USER SSH_AGENT_PID SSH_AUTH_SOCK STAMPS_DIR TCLIBC TCMODE all_proxy ftp_proxy ftps_proxy http_proxy https_proxy no_proxy
LESSCLOSE=/usr/bin/lesspipe %s %s
XDG_SESSION_CLASS=user
TERM=xterm-256color
LESSOPEN=| /usr/bin/lesspipe %s
USER=nikita
GNOME_TERMINAL_SERVICE=:1.73
DISPLAY=:1
SHLVL=1
QT_IM_MODULE=ibus
XDG_RUNTIME_DIR=/run/user/1000
XDG_DATA_DIRS=/usr/share/ubuntu:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
PATH=/home/nikita/yoctoproject/poky/scripts:/home/nikita/yoctoproject/poky/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin
GDMSESSION=ubuntu
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
BUILDDIR=/home/nikita/yoctoproject/poky/build
OLDPWD=/home/nikita/yoctoproject/poky
_=/usr/bin/env




Nikita Gupta
 

Hello Alexander

I am putting some of lines of qemu output of nographic here .

[    0.053290] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.053300] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.053495] Using ACPI (MADT) for SMP configuration information
[    0.053544] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053830] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.054483] [mem 0x10000000-0xfffbffff] available for PCI devices
[    0.054526] Booting paravirtualized kernel on bare hardware
[    0.054875] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910s
[    0.055308] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.066824] percpu: Embedded 56 pages/cpu s191384 r8192 d29800 u2097152
[    0.068969] Built 1 zonelists, mobility grouping on.  Total pages: 64356
[    0.069155] Kernel command line: root=/dev/vda rw  console=ttyS0 mem=256M ip=192.168.7.2::192.168.7. 
[    0.135277] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.135665] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.137117] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.140409] Memory: 232140K/261604K available (14340K kernel code, 1407K rwdata, 3196K rodata, 1612K)
[    0.152763] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.153835] Kernel/User page tables isolation: enabled
[    0.155757] ftrace: allocating 41816 entries in 164 pages
[    0.232233] rcu: Preemptible hierarchical RCU implementation.
[    0.232365] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.232452] Tasks RCU enabled.
[    0.232526] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.232562] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.253797] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[    0.263911] random: get_random_bytes called from start_kernel+0x325/0x4db with crng_init=0
[    0.268071] Console: colour VGA+ 80x25
[    0.310885] printk: console [ttyS0] enabled
[    0.314617] ACPI: Core revision 20190816
[    0.323461] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.331315] APIC: Switch to symmetric I/O mode setup
[    0.375864] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.381414] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x185aca918fe, max_idle_ns:s
[    0.383024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3379.20 BogoM)
[    0.385009] pid_max: default: 32768 minimum: 301
[    0.386726] LSM: Security Framework initializing
[    0.388807] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.388944] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.415798] process: using mwait in idle threads
[    0.416144] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.416930] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.418102] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.419029] Spectre V2 : Mitigation: Retpolines
[    0.419928] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.420958] Speculative Store Bypass: Vulnerable
[    0.421698] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.626147] random: fast init done
[    0.772307] Freeing SMP alternatives memory: 44K
[    0.879347] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (family: 0x6, model: 0xf,)
[    0.887084] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.889602] rcu: Hierarchical SRCU implementation.
[    0.894836] smp: Bringing up secondary CPUs ...
[    0.894970] smp: Brought up 1 node, 1 CPU
[    0.895954] smpboot: Max logical packages: 1
[    0.896451] smpboot: Total of 1 processors activated (3379.20 BogoMIPS)
[    0.909320] devtmpfs: initialized
[    0.921047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044627s
[    0.922081] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.924750] xor: measuring software checksum speed
[    0.935030]    prefetch64-sse:  2032.000 MB/sec
[    0.945932]    generic_sse:  2136.000 MB/sec
[    0.946519] xor: using function: generic_sse (2136.000 MB/sec)
[    0.947198] pinctrl core: initialized pinctrl subsystem
[    0.955770] NET: Registered protocol family 16
[    0.966246] cpuidle: using governor menu
[    0.967806] ACPI: bus type PCI registered
[    0.970419] PCI: Using configuration type 1 for base access
[    1.026186] raid6: sse2x4   gen()   492 MB/s
[    1.044095] raid6: sse2x4   xor()   261 MB/s
[    1.061027] raid6: sse2x2   gen()   523 MB/s
[    1.078256] raid6: sse2x2   xor()   259 MB/s
[    1.096030] raid6: sse2x1   gen()   425 MB/s
[    1.113986] raid6: sse2x1   xor()   246 MB/s
[    1.114936] raid6: using algorithm sse2x2 gen() 523 MB/s
[    1.115975] raid6: .... xor() 259 MB/s, rmw enabled
[    1.117147] raid6: using ssse3x2 recovery algorithm
[    1.119767] ACPI: Added _OSI(Module Device)
[    1.119947] ACPI: Added _OSI(Processor Device)
[    1.120422] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.120918] ACPI: Added _OSI(Processor Aggregator Device)
[    1.122005] ACPI: Added _OSI(Linux-Dell-Video)
[    1.122506] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.122922] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.140652] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    1.161811] ACPI: Interpreter enabled
[    1.163464] ACPI: (supports S0 S3 S5)
[    1.163979] ACPI: Using IOAPIC for interrupt routing
[    1.165261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.167766] ACPI: Enabled 2 GPEs in block 00 to 0F
[    1.207391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.208367] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    1.210180] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configurati.
[    1.214285] PCI host bridge to bus 0000:00
[    1.215024] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.215968] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.216981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.217926] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
[    1.218920] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[    1.220119] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.228162] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.233048] pci 0000:00:01.1: reg 0x20: [io  0xc0e0-0xc0ef]
[    1.234367] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.235947] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.236934] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.237717] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.239483] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    1.241609] pci 0000:00:01.2: reg 0x20: [io  0xc080-0xc09f]
[    1.245137] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.246990] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.248982] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.250849] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.252532] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.254439] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[    1.259319] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    1.261511] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    1.262963] pci 0000:00:03.0: reg 0x10: [io  0xc0a0-0xc0bf]
[    1.264399] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    1.267584] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[    1.269382] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.271515] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00
[    1.273410] pci 0000:00:04.0: reg 0x10: [io  0xc0c0-0xc0df]
[    1.276581] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[    1.278443] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    1.279958] pci 0000:00:05.0: reg 0x10: [io  0xc000-0xc07f]
[    1.281211] pci 0000:00:05.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    1.284515] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[    1.294292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.295942] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.297224] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.298272] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.299118] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.305368] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.305905] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.305970] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.306637] vgaarb: loaded
[    1.308290] SCSI subsystem initialized
[    1.309565] ACPI: bus type USB registered
[    1.310261] usbcore: registered new interface driver usbfs
[    1.311172] usbcore: registered new interface driver hub
[    1.311974] usbcore: registered new device driver usb
[    1.314504] pps_core: LinuxPPS API ver. 1 registered
[    1.314975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...>
[    1.316037] PTP clock support registered
[    1.318393] PCI: Using ACPI for IRQ routing
[    1.332774] Bluetooth: Core ver 2.22
[    1.333104] NET: Registered protocol family 31
[    1.333949] Bluetooth: HCI device and connection manager initialized
[    1.335055] Bluetooth: HCI socket layer initialized
[    1.335724] Bluetooth: L2CAP socket layer initialized
[    1.336097] Bluetooth: SCO socket layer initialized
[    1.340083] hpet: 3 channels of 0 reserved for per-cpu timers
[    1.341256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.342941] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.349759] clocksource: Switched to clocksource tsc-early
[    1.783492] pnp: PnP ACPI init
[    1.789182] pnp: PnP ACPI: found 7 devices
[    1.807251] thermal_sys: Registered thermal governor 'step_wise'
[    1.807387] thermal_sys: Registered thermal governor 'user_space'
[    1.824442] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.828445] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.830071] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.832002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.833410] pci_bus 0000:00: resource 7 [mem 0x10000000-0xfebfffff window]
[    1.834741] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    1.837537] NET: Registered protocol family 2
[    1.839729] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.865735] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.867608] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.868746] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.869797] TCP: Hash tables configured (established 2048 bind 2048)
[    1.883744] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.884827] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.888819] NET: Registered protocol family 1
[    1.893298] RPC: Registered named UNIX socket transport module.
[    1.894880] RPC: Registered udp transport module.
[    1.895821] RPC: Registered tcp transport module.
[    1.896792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.898265] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.899583] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.901234] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.914435] pci 0000:00:01.0: quirk_isa_dma_hangs+0x0/0x20 took 12838 usecs
[    2.135341] PCI Interrupt Link [LNKD] enabled at IRQ 11
[    2.341888] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x650 took 415769 usecs
[    2.343275] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.345068] PCI: CLS 0 bytes, default 64
[    2.359823] check: Scanning for low memory corruption every 60 seconds
[    2.364056] Initialise system trusted keyrings
[    2.365862] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    2.393568] NFS: Registering the id_resolver key type
[    2.394661] Key type id_resolver registered
[    2.395253] Key type id_legacy registered
[    2.398828] Key type cifs.idmap registered
[    2.426560] Key type asymmetric registered
[    2.427166] Asymmetric key parser 'x509' registered
[    2.427826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.428763] io scheduler mq-deadline registered
[    2.429376] io scheduler kyber registered
[    2.443085] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.452480] ACPI: Power Button [PWRF]
[    2.636339] PCI Interrupt Link [LNKC] enabled at IRQ 10
[    3.043706] PCI Interrupt Link [LNKA] enabled at IRQ 10
[    3.046003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.080365] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.115413] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.130219] Linux agpgart interface v0.103
[    3.132176] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdfff
[    3.141489] crng init done
    3.142481] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebdf
[    3.145663] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[    3.147438] Console: switching to colour dummy device 80x25
[    3.150326] [drm] Found bochs VGA, ID 0xb0c0.
[    3.150809] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    3.152273] [TTM] Zone  kernel: Available graphics memory: 116092 KiB
[    3.153052] [TTM] Initializing pool allocator
[    3.153658] [TTM] Initializing DMA pool allocator
[    3.157316] [drm] Found EDID data blob.
[    3.162182] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[    3.200140] fbcon: bochs-drmdrmfb (fb0) is primary device
[    3.232092] Console: switching to colour frame buffer device 128x48
[    3.247507] bochs-drm 0000:00:02.0: fb0: bochs-drmdrmfb frame buffer device
[    3.287157] brd: module loaded
[    3.338996] loop: module loaded
[    3.346707] virtio_blk virtio2: [vda] 23994 512-byte logical blocks (12.3 MB/11.7 MiB)
[    3.389639] Uniform Multi-Platform E-IDE driver
[    3.390654] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    3.392365] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    3.393854] legacy IDE will be removed in 2021, please switch to libata
[    3.393854] Report any missing HW support to linux-ide@...
[    3.396536]     ide0: BM-DMA at 0xc0e0-0xc0e7
[    3.405884]     ide1: BM-DMA at 0xc0e8-0xc0ef
[    3.410281] tsc: Refined TSC clocksource calibration: 1689.599 MHz
[    3.411557] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x185ac5ca321, max_idle_ns: 44079s
[    3.413037] clocksource: Switched to clocksource tsc
[    4.627674] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    5.254056] hdc: MWDMA2 mode selected
[    5.255216] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.255797] ide1 at 0x170-0x177,0x376 on irq 15
[    5.257637] ide-gd driver 1.18
[    5.258220] ide-cd driver 5.00
[    5.261670] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[    5.262259] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.325752] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    5.326801] e100: Copyright(c) 1999-2006 Intel Corporation
[    5.327565] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.328444] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.329179] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    5.329878] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.330642] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    5.331302] igb: Copyright (c) 2007-2014 Intel Corporation.
[    5.331892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.332454] ehci-pci: EHCI PCI platform driver
[    5.333094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.333846] ohci-pci: OHCI PCI platform driver
[    5.334450] uhci_hcd: USB Universal Host Controller Interface driver
[    5.485426] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    5.486339] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    5.487652] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[    5.493247] hub 1-0:1.0: USB hub found
[    5.494019] hub 1-0:1.0: 2 ports detected
[    5.502529] usbcore: registered new interface driver usb-storage
[    5.503369] usbcore: registered new interface driver usbserial_generic
[    5.504629] usbserial: USB Serial support registered for generic
[    5.505283] usbcore: registered new interface driver ftdi_sio
[    5.505839] usbserial: USB Serial support registered for FTDI USB Serial Device
[    5.506584] usbcore: registered new interface driver pl2303
[    5.507128] usbserial: USB Serial support registered for pl2303
[    5.508227] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.510883] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.511896] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.522420] mousedev: PS/2 mouse device common for all mice
[    5.526890] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.528503] rtc_cmos 00:00: RTC can wake from S4
[    5.534544] rtc_cmos 00:00: registered as rtc0
[    5.556479] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    5.561094] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@...
[    5.563200] intel_pstate: CPU model not supported
[    5.563869] sdhci: Secure Digital Host Controller Interface driver
[    5.564514] sdhci: Copyright(c) Pierre Ossman
[    5.565088] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.566636] usbcore: registered new interface driver usbhid
[    5.567241] usbhid: USB HID core driver
[    5.567922] drop_monitor: Initializing network drop monitor service
[    5.568892] u32 classifier
[    5.569207]     input device check on
[    5.569564]     Actions configured
[    5.571099] NET: Registered protocol family 10
[    5.586617] Segment Routing with IPv6
[    5.587629] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    5.590474] NET: Registered protocol family 17
[    5.591687] Key type dns_resolver registered
[    5.593676] IPI shorthand broadcast: enabled
[    5.594374] sched_clock: Marking stable (5485271338, 108914060)->(5981448748, -387263350)
[    5.595828] Loading compiled-in X.509 certificates
[    5.596642] Key type ._fscrypt registered
[    5.597146] Key type .fscrypt registered
[    5.601249] Btrfs loaded, crc32c=crc32c-generic
[    5.622879] Key type encrypted registered
[    5.626265] printk: console [netcon0] enabled
[    5.626738] netconsole: network logging started
[    5.627736] rtc_cmos 00:00: setting system clock to 2022-07-20T10:36:10 UTC (1658313370)
[    5.673637] IP-Config: Complete:
[    5.674257]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=11
[    5.675261]      host=192.168.7.2, domain=, nis-domain=(none)
[    5.675828]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    5.729332] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    5.922791] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:064
[    5.924768] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on us0
[    6.155241] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    6.157869] md: Waiting for all devices to be available before autodetect
    6.158853] md: If you don't use raid, use raid=noautodetect
[    6.162222] md: Autodetecting RAID arrays.
[    6.162754] md: autorun ...
[    6.163171] md: ... autorun DONE.
[    6.272996] EXT4-fs (vda): recovery complete
[    6.276592] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
[    6.278241] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    6.322833] devtmpfs: mounted
[    6.354516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.465480] Freeing unused kernel image memory: 1612K
[    6.467795] Write protecting the kernel read-only data: 20480k
[    6.471841] Freeing unused kernel image memory: 2004K
[    6.473580] Freeing unused kernel image memory: 900K
[    6.474647] Run /sbin/init as init process
INIT: version 2.96 booting
Starting udev
[    7.915621] udevd[106]: starting version 3.2.9
[    8.067716] udevd[107]: starting eudev-3.2.9
[   10.295030] EXT4-fs (vda): re-mounted. Opts: (null)
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done
 
Poky (Yocto Project Reference Distro) 3.1.16 qemux86-64 /dev/ttyS0
 
qemux86-64 login: 
Poky (Yocto Project Reference Distro) 3.1.16 qemux86-64 /dev/ttyS0
 
qemux86-64 login: clear
Password: 
Login incorrect
qemux86-64 login: root
root@qemux86-64:~# ls
 


Alexander Kanavin
 

This works as intended.

So the problem is that when qemu runs from testimage it tries to open
a graphical window using X and that for some reason fails. You can
perhaps force a no-graphical execution by
unset DISPLAY
before running bitbake.

Alex

On Wed, 20 Jul 2022 at 12:44, Nikita Gupta <nikitagupta2509@...> wrote:

Hello Alexander

I am putting some of lines of qemu output of nographic here .

[ 0.053290] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.053300] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.053495] Using ACPI (MADT) for SMP configuration information
[ 0.053544] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.053830] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.054483] [mem 0x10000000-0xfffbffff] available for PCI devices
[ 0.054526] Booting paravirtualized kernel on bare hardware
[ 0.054875] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910s
[ 0.055308] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.066824] percpu: Embedded 56 pages/cpu s191384 r8192 d29800 u2097152
[ 0.068969] Built 1 zonelists, mobility grouping on. Total pages: 64356
[ 0.069155] Kernel command line: root=/dev/vda rw console=ttyS0 mem=256M ip=192.168.7.2::192.168.7.
[ 0.135277] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.135665] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.137117] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.140409] Memory: 232140K/261604K available (14340K kernel code, 1407K rwdata, 3196K rodata, 1612K)
[ 0.152763] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.153835] Kernel/User page tables isolation: enabled
[ 0.155757] ftrace: allocating 41816 entries in 164 pages
[ 0.232233] rcu: Preemptible hierarchical RCU implementation.
[ 0.232365] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[ 0.232452] Tasks RCU enabled.
[ 0.232526] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.232562] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.253797] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[ 0.263911] random: get_random_bytes called from start_kernel+0x325/0x4db with crng_init=0
[ 0.268071] Console: colour VGA+ 80x25
[ 0.310885] printk: console [ttyS0] enabled
[ 0.314617] ACPI: Core revision 20190816
[ 0.323461] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.331315] APIC: Switch to symmetric I/O mode setup
[ 0.375864] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.381414] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x185aca918fe, max_idle_ns:s
[ 0.383024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3379.20 BogoM)
[ 0.385009] pid_max: default: 32768 minimum: 301
[ 0.386726] LSM: Security Framework initializing
[ 0.388807] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.388944] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.415798] process: using mwait in idle threads
[ 0.416144] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.416930] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.418102] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.419029] Spectre V2 : Mitigation: Retpolines
[ 0.419928] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.420958] Speculative Store Bypass: Vulnerable
[ 0.421698] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.626147] random: fast init done
[ 0.772307] Freeing SMP alternatives memory: 44K
[ 0.879347] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (family: 0x6, model: 0xf,)
[ 0.887084] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[ 0.889602] rcu: Hierarchical SRCU implementation.
[ 0.894836] smp: Bringing up secondary CPUs ...
[ 0.894970] smp: Brought up 1 node, 1 CPU
[ 0.895954] smpboot: Max logical packages: 1
[ 0.896451] smpboot: Total of 1 processors activated (3379.20 BogoMIPS)
[ 0.909320] devtmpfs: initialized
[ 0.921047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044627s
[ 0.922081] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.924750] xor: measuring software checksum speed
[ 0.935030] prefetch64-sse: 2032.000 MB/sec
[ 0.945932] generic_sse: 2136.000 MB/sec
[ 0.946519] xor: using function: generic_sse (2136.000 MB/sec)
[ 0.947198] pinctrl core: initialized pinctrl subsystem
[ 0.955770] NET: Registered protocol family 16
[ 0.966246] cpuidle: using governor menu
[ 0.967806] ACPI: bus type PCI registered
[ 0.970419] PCI: Using configuration type 1 for base access
[ 1.026186] raid6: sse2x4 gen() 492 MB/s
[ 1.044095] raid6: sse2x4 xor() 261 MB/s
[ 1.061027] raid6: sse2x2 gen() 523 MB/s
[ 1.078256] raid6: sse2x2 xor() 259 MB/s
[ 1.096030] raid6: sse2x1 gen() 425 MB/s
[ 1.113986] raid6: sse2x1 xor() 246 MB/s
[ 1.114936] raid6: using algorithm sse2x2 gen() 523 MB/s
[ 1.115975] raid6: .... xor() 259 MB/s, rmw enabled
[ 1.117147] raid6: using ssse3x2 recovery algorithm
[ 1.119767] ACPI: Added _OSI(Module Device)
[ 1.119947] ACPI: Added _OSI(Processor Device)
[ 1.120422] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.120918] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.122005] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.122506] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.122922] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 1.140652] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.161811] ACPI: Interpreter enabled
[ 1.163464] ACPI: (supports S0 S3 S5)
[ 1.163979] ACPI: Using IOAPIC for interrupt routing
[ 1.165261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.167766] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 1.207391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.208367] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 1.210180] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configurati.
[ 1.214285] PCI host bridge to bus 0000:00
[ 1.215024] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.215968] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.216981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.217926] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
[ 1.218920] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 1.220119] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.228162] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 1.233048] pci 0000:00:01.1: reg 0x20: [io 0xc0e0-0xc0ef]
[ 1.234367] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.235947] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.236934] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.237717] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.239483] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[ 1.241609] pci 0000:00:01.2: reg 0x20: [io 0xc080-0xc09f]
[ 1.245137] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 1.246990] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 1.248982] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 1.250849] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 1.252532] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 1.254439] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 1.259319] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 1.261511] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 1.262963] pci 0000:00:03.0: reg 0x10: [io 0xc0a0-0xc0bf]
[ 1.264399] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 1.267584] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 1.269382] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 1.271515] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00
[ 1.273410] pci 0000:00:04.0: reg 0x10: [io 0xc0c0-0xc0df]
[ 1.276581] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 1.278443] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 1.279958] pci 0000:00:05.0: reg 0x10: [io 0xc000-0xc07f]
[ 1.281211] pci 0000:00:05.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 1.284515] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 1.294292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 1.295942] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.297224] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.298272] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 1.299118] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 1.305368] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.305905] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.305970] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.306637] vgaarb: loaded
[ 1.308290] SCSI subsystem initialized
[ 1.309565] ACPI: bus type USB registered
[ 1.310261] usbcore: registered new interface driver usbfs
[ 1.311172] usbcore: registered new interface driver hub
[ 1.311974] usbcore: registered new device driver usb
[ 1.314504] pps_core: LinuxPPS API ver. 1 registered
[ 1.314975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...>
[ 1.316037] PTP clock support registered
[ 1.318393] PCI: Using ACPI for IRQ routing
[ 1.332774] Bluetooth: Core ver 2.22
[ 1.333104] NET: Registered protocol family 31
[ 1.333949] Bluetooth: HCI device and connection manager initialized
[ 1.335055] Bluetooth: HCI socket layer initialized
[ 1.335724] Bluetooth: L2CAP socket layer initialized
[ 1.336097] Bluetooth: SCO socket layer initialized
[ 1.340083] hpet: 3 channels of 0 reserved for per-cpu timers
[ 1.341256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.342941] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 1.349759] clocksource: Switched to clocksource tsc-early
[ 1.783492] pnp: PnP ACPI init
[ 1.789182] pnp: PnP ACPI: found 7 devices
[ 1.807251] thermal_sys: Registered thermal governor 'step_wise'
[ 1.807387] thermal_sys: Registered thermal governor 'user_space'
[ 1.824442] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.828445] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.830071] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.832002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.833410] pci_bus 0000:00: resource 7 [mem 0x10000000-0xfebfffff window]
[ 1.834741] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 1.837537] NET: Registered protocol family 2
[ 1.839729] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 1.865735] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 1.867608] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 1.868746] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.869797] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.883744] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.884827] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.888819] NET: Registered protocol family 1
[ 1.893298] RPC: Registered named UNIX socket transport module.
[ 1.894880] RPC: Registered udp transport module.
[ 1.895821] RPC: Registered tcp transport module.
[ 1.896792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.898265] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.899583] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.901234] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.914435] pci 0000:00:01.0: quirk_isa_dma_hangs+0x0/0x20 took 12838 usecs
[ 2.135341] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 2.341888] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x650 took 415769 usecs
[ 2.343275] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.345068] PCI: CLS 0 bytes, default 64
[ 2.359823] check: Scanning for low memory corruption every 60 seconds
[ 2.364056] Initialise system trusted keyrings
[ 2.365862] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[ 2.393568] NFS: Registering the id_resolver key type
[ 2.394661] Key type id_resolver registered
[ 2.395253] Key type id_legacy registered
[ 2.398828] Key type cifs.idmap registered
[ 2.426560] Key type asymmetric registered
[ 2.427166] Asymmetric key parser 'x509' registered
[ 2.427826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.428763] io scheduler mq-deadline registered
[ 2.429376] io scheduler kyber registered
[ 2.443085] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.452480] ACPI: Power Button [PWRF]
[ 2.636339] PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.043706] PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.046003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.080365] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.115413] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.130219] Linux agpgart interface v0.103
[ 3.132176] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfd000000 -> 0xfdfff
[ 3.141489] crng init done
3.142481] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfebd0000 -> 0xfebdf
[ 3.145663] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[ 3.147438] Console: switching to colour dummy device 80x25
[ 3.150326] [drm] Found bochs VGA, ID 0xb0c0.
[ 3.150809] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 3.152273] [TTM] Zone kernel: Available graphics memory: 116092 KiB
[ 3.153052] [TTM] Initializing pool allocator
[ 3.153658] [TTM] Initializing DMA pool allocator
[ 3.157316] [drm] Found EDID data blob.
[ 3.162182] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 3.200140] fbcon: bochs-drmdrmfb (fb0) is primary device
[ 3.232092] Console: switching to colour frame buffer device 128x48
[ 3.247507] bochs-drm 0000:00:02.0: fb0: bochs-drmdrmfb frame buffer device
[ 3.287157] brd: module loaded
[ 3.338996] loop: module loaded
[ 3.346707] virtio_blk virtio2: [vda] 23994 512-byte logical blocks (12.3 MB/11.7 MiB)
[ 3.389639] Uniform Multi-Platform E-IDE driver
[ 3.390654] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 3.392365] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 3.393854] legacy IDE will be removed in 2021, please switch to libata
[ 3.393854] Report any missing HW support to linux-ide@...
[ 3.396536] ide0: BM-DMA at 0xc0e0-0xc0e7
[ 3.405884] ide1: BM-DMA at 0xc0e8-0xc0ef
[ 3.410281] tsc: Refined TSC clocksource calibration: 1689.599 MHz
[ 3.411557] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x185ac5ca321, max_idle_ns: 44079s
[ 3.413037] clocksource: Switched to clocksource tsc
[ 4.627674] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 5.254056] hdc: MWDMA2 mode selected
[ 5.255216] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.255797] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.257637] ide-gd driver 1.18
[ 5.258220] ide-cd driver 5.00
[ 5.261670] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[ 5.262259] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.325752] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.326801] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.327565] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 5.328444] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.329179] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.329878] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.330642] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 5.331302] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 5.331892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.332454] ehci-pci: EHCI PCI platform driver
[ 5.333094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.333846] ohci-pci: OHCI PCI platform driver
[ 5.334450] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.485426] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 5.486339] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 5.487652] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[ 5.493247] hub 1-0:1.0: USB hub found
[ 5.494019] hub 1-0:1.0: 2 ports detected
[ 5.502529] usbcore: registered new interface driver usb-storage
[ 5.503369] usbcore: registered new interface driver usbserial_generic
[ 5.504629] usbserial: USB Serial support registered for generic
[ 5.505283] usbcore: registered new interface driver ftdi_sio
[ 5.505839] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 5.506584] usbcore: registered new interface driver pl2303
[ 5.507128] usbserial: USB Serial support registered for pl2303
[ 5.508227] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.510883] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.511896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.522420] mousedev: PS/2 mouse device common for all mice
[ 5.526890] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.528503] rtc_cmos 00:00: RTC can wake from S4
[ 5.534544] rtc_cmos 00:00: registered as rtc0
[ 5.556479] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 5.561094] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@...
[ 5.563200] intel_pstate: CPU model not supported
[ 5.563869] sdhci: Secure Digital Host Controller Interface driver
[ 5.564514] sdhci: Copyright(c) Pierre Ossman
[ 5.565088] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.566636] usbcore: registered new interface driver usbhid
[ 5.567241] usbhid: USB HID core driver
[ 5.567922] drop_monitor: Initializing network drop monitor service
[ 5.568892] u32 classifier
[ 5.569207] input device check on
[ 5.569564] Actions configured
[ 5.571099] NET: Registered protocol family 10
[ 5.586617] Segment Routing with IPv6
[ 5.587629] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.590474] NET: Registered protocol family 17
[ 5.591687] Key type dns_resolver registered
[ 5.593676] IPI shorthand broadcast: enabled
[ 5.594374] sched_clock: Marking stable (5485271338, 108914060)->(5981448748, -387263350)
[ 5.595828] Loading compiled-in X.509 certificates
[ 5.596642] Key type ._fscrypt registered
[ 5.597146] Key type .fscrypt registered
[ 5.601249] Btrfs loaded, crc32c=crc32c-generic
[ 5.622879] Key type encrypted registered
[ 5.626265] printk: console [netcon0] enabled
[ 5.626738] netconsole: network logging started
[ 5.627736] rtc_cmos 00:00: setting system clock to 2022-07-20T10:36:10 UTC (1658313370)
[ 5.673637] IP-Config: Complete:
[ 5.674257] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=11
[ 5.675261] host=192.168.7.2, domain=, nis-domain=(none)
[ 5.675828] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[ 5.729332] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 5.922791] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:064
[ 5.924768] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on us0
[ 6.155241] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 6.157869] md: Waiting for all devices to be available before autodetect
6.158853] md: If you don't use raid, use raid=noautodetect
[ 6.162222] md: Autodetecting RAID arrays.
[ 6.162754] md: autorun ...
[ 6.163171] md: ... autorun DONE.
[ 6.272996] EXT4-fs (vda): recovery complete
[ 6.276592] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
[ 6.278241] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 6.322833] devtmpfs: mounted
[ 6.354516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.465480] Freeing unused kernel image memory: 1612K
[ 6.467795] Write protecting the kernel read-only data: 20480k
[ 6.471841] Freeing unused kernel image memory: 2004K
[ 6.473580] Freeing unused kernel image memory: 900K
[ 6.474647] Run /sbin/init as init process
INIT: version 2.96 booting
Starting udev
[ 7.915621] udevd[106]: starting version 3.2.9
[ 8.067716] udevd[107]: starting eudev-3.2.9
[ 10.295030] EXT4-fs (vda): re-mounted. Opts: (null)
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 3.1.16 qemux86-64 /dev/ttyS0

qemux86-64 login:
Poky (Yocto Project Reference Distro) 3.1.16 qemux86-64 /dev/ttyS0

qemux86-64 login: clear
Password:
Login incorrect
qemux86-64 login: root
root@qemux86-64:~# ls




Nikita Gupta
 

Hello 

i was not able to find that how to force a no-graphical execution by unset Display before running bitbake . So i again tried to test my image by previous method 
bitbake rpm busybox curl run-postinsts
bitbake package-index
bitbake core-image-minimal -c testimage -v

but this time i did not get error like previous one this time i lost my deploy folders in which images folder was present . i have no idea how it happened i am able to see all folders except deploy ( see in attachment) .

kindly tell  why deploy folder got disappeared and how i can recover that ?

Thanks in Advance


Alexander Kanavin
 

You need to rebuild the image:

bitbake core-image-minimal

Alex

On Mon, 22 Aug 2022 at 12:32, Nikita Gupta <nikitagupta2509@...> wrote:

Hello

i was not able to find that how to force a no-graphical execution by unset Display before running bitbake . So i again tried to test my image by previous method
bitbake rpm busybox curl run-postinsts
bitbake package-index
bitbake core-image-minimal -c testimage -v

but this time i did not get error like previous one this time i lost my deploy folders in which images folder was present . i have no idea how it happened i am able to see all folders except deploy ( see in attachment) .

kindly tell why deploy folder got disappeared and how i can recover that ?

Thanks in Advance