Topics

#sdk #toolchain #sdk #toolchain


Joris Offouga <offougajoris@...>
 

Hi all,

I am developing a custom distribution based on poky and I am creating an extensible sdk from my image, but when I install this extensible sdk, I find an error in python3 and an error in relocate.py. For my extensible sdk to work I have to install the sdk generated by populate_sdk in its default location. Do you have an idea to solve my problem?

You can see raw log :

SDK environment now set up; additionally you may now run devtool to perform development tasks.
Run devtool --help for further details.
/home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/usr/bin/python3: line 5: /home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/usr/bin/python3.7.real: No such file or directory
post-relocate command "/home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/post-relocate-setup.d/meson-setup.py /home/jun/poky-evbb_sdk" failed with status 127
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/jun/poky-evbb_sdk/environment-setup-armv7vet2hf-neon-evbox-linux-gnueabi

Best regards,

Joris Offouga


Randy MacLeod
 

On 2/27/20 2:56 PM, Joris Offouga wrote:
Hi all,
I am developing a custom distribution based on poky and I am creating an extensible sdk from my image, but when I install this extensible sdk, I find an error in python3 and an error in relocate.py. For my extensible sdk to work I have to install the sdk generated by populate_sdk in its default location. Do you have an idea to solve my problem?
You can see raw log :
SDK environment now set up; additionally you may now run devtool to perform development tasks.
Run devtool --help for further details.
/home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/usr/bin/python3: line 5: /home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/usr/bin/python3.7.real: No such file or directory
post-relocate command "/home/jun/poky-evbb_sdk/sysroots/x86_64-pokysdk-linux/post-relocate-setup.d/meson-setup.py /home/jun/poky-evbb_sdk" failed with status 127
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /home/jun/poky-evbb_sdk/environment-setup-armv7vet2hf-neon-evbox-linux-gnueabi
Hi Joris,

Thanks for reporting the issue.

I can't test this right now. Can you reproduce the problem
with just oe-core and a core-image that is similar to yours?

If you can, then please either debug this issue and submit a patch:
https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded

or open a defect describing:

- your build host,
- local.conf file
- exact versions yocto software used and
- the steps needed to reproduce the issue:
https://bugzilla.yoctoproject.org/

Sorry, I can't help more right now.

../Randy
Best regards,
Joris Offouga

--
# Randy MacLeod
# Wind River Linux