|
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
|
|
|
On Mon, Jul 30, 2012 at 08:53:50AM -0400, Jim Abernathy wrote: I'm on master branch trying to build core-image-minimal for the machine
"pandaboard". Besides the basics, I put in a license statement for
cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at
/home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not
inherit file classes/systemd.bbclass add meta-openembedded/meta-systemd to your BBLAYERS Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto -- Martin 'JaMa' Jansa jabber: Martin.Jansa@...
|
|
|
On 07/30/2012 09:00 AM, Martin Jansa wrote: On Mon, Jul 30, 2012 at 08:53:50AM -0400, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine
"pandaboard". Besides the basics, I put in a license statement for
cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at
/home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not
inherit file classes/systemd.bbclass add meta-openembedded/meta-systemd to your BBLAYERS
When I do that I get the errors: ERROR: No recipes available for: /home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend /home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend ERROR: Command execution failed: Exited with 1 Jim A Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
|
|
|
On 2012-07-30 06:53, Jim Abernathy wrote: I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf: BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/" -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On Mon, Jul 30, 2012 at 09:06:23AM -0400, Jim Abernathy wrote: On 07/30/2012 09:00 AM, Martin Jansa wrote:
On Mon, Jul 30, 2012 at 08:53:50AM -0400, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine
"pandaboard". Besides the basics, I put in a license statement for
cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at
/home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not
inherit file classes/systemd.bbclass add meta-openembedded/meta-systemd to your BBLAYERS
When I do that I get the errors:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1 Add BB_DANGLINGAPPENDS_WARNONLY to meta-openembedded/meta-systemd/conf/layer.conf or add meta-gnome/meta-efl layers if you would use them.. Cheers,
Jim A
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
-- Martin 'JaMa' Jansa jabber: Martin.Jansa@...
|
|
|
On Mon, Jul 30, 2012 at 03:19:30PM +0200, Martin Jansa wrote: On Mon, Jul 30, 2012 at 09:06:23AM -0400, Jim Abernathy wrote:
On 07/30/2012 09:00 AM, Martin Jansa wrote:
On Mon, Jul 30, 2012 at 08:53:50AM -0400, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine
"pandaboard". Besides the basics, I put in a license statement for
cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at
/home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not
inherit file classes/systemd.bbclass add meta-openembedded/meta-systemd to your BBLAYERS
When I do that I get the errors:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1 Add BB_DANGLINGAPPENDS_WARNONLY to
meta-openembedded/meta-systemd/conf/layer.conf
or add meta-gnome/meta-efl layers if you would use them.. Or better BBMASK those meta-gnome/meta-efl subdirectories like meta-systemd/README suggests: To make BBMASK'ing per layer possible the following directory structure is used: $[LAYERDIR}/<layername>/recipes-<group-name>/<recipe-name>/<recipe-name>.bbappend Cheers,
Cheers,
Jim A
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@...
-- Martin 'JaMa' Jansa jabber: Martin.Jansa@...
|
|
|
On 07/30/2012 09:15 AM, Gary Thomas wrote: On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. Jim A
|
|
|
On 2012-07-30 07:48, Jim Abernathy wrote: On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from trying to parse the recipe mentioned above. Note: I use these layers with Yocto all the time with that mask... -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 07/30/2012 09:19 AM, Martin Jansa wrote: On Mon, Jul 30, 2012 at 09:06:23AM -0400, Jim Abernathy wrote:
On 07/30/2012 09:00 AM, Martin Jansa wrote:
On Mon, Jul 30, 2012 at 08:53:50AM -0400, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine
"pandaboard". Besides the basics, I put in a license statement for
cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at
/home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not
inherit file classes/systemd.bbclass add meta-openembedded/meta-systemd to your BBLAYERS
When I do that I get the errors:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1 Add BB_DANGLINGAPPENDS_WARNONLY to
meta-openembedded/meta-systemd/conf/layer.conf BB_DANDLINGAPPENDS_WARNONLY = "yes" seems to have gotten me past the build errors for now. I'll look at the BBMASK some more since it looks cleaner to just modify the local.conf file. Jim A or add meta-gnome/meta-efl layers if you would use them..
Cheers,
Jim A
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native'
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
|
|
|
On 07/30/2012 09:56 AM, Gary Thomas wrote: On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement: BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/" I got the same error as my original post. Jim A
|
|
|
On 2012-07-30 08:11, Jim Abernathy wrote: On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK statement somewhere and this one is being ignored because of the ?= assignment. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 07/30/2012 10:21 AM, Gary Thomas wrote: On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
hmm.. right now I have the build running by using the BB_DANGLINGAPPENDS_WARNONLY = "yes" statement. When that is done, I'll test the BBMASK on a completely new build from scratch and see what I get. Jim A
|
|
|
On 07/30/2012 10:21 AM, Gary Thomas wrote: On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error: ERROR: No recipes available for: /home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend /home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend ERROR: Command execution failed: Exited with 1 I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Jim A
|
|
|
On 2012-07-30 10:50, Jim Abernathy wrote: On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 07/30/2012 12:57 PM, Gary Thomas wrote: On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/" statement in local.conf to solves the problem. What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? Jim A
|
|
|
On 2012-07-30 11:09, Jim Abernathy wrote: On 07/30/2012 12:57 PM, Gary Thomas wrote:
On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
statement in local.conf to solves the problem.
What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? The dependency on systemd comes from this recipe: meta-ti/recipes-misc/payload/bonescript.bb The BBMASK is making bitbake ignore that recipe (you don't need it), hence no dependency. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 07/30/2012 01:16 PM, Gary Thomas wrote: On 2012-07-30 11:09, Jim Abernathy wrote:
On 07/30/2012 12:57 PM, Gary Thomas wrote:
On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
statement in local.conf to solves the problem.
What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? The dependency on systemd comes from this recipe: meta-ti/recipes-misc/payload/bonescript.bb
The BBMASK is making bitbake ignore that recipe (you don't need it), hence no dependency.
I got core-image-minimal built without errors, Thanks, now I need to ask some questions about booting that image. I'm assuming that I can follow the instructions on pandaboard.org for creating the SD card format and just copy the deploy/image/ u-boot, MLO, uImage, and rootfs to the right places and boot the sdcard in the pandaboard. Anyway, that's what I tried. I'm connected to the panadboard via serial port and the U-Boot works and the uImage seems to be found, but I don't get a login console on the serial port: U-Boot SPL 2011.12-dirty (Jul 30 2012 - 13:44:03) Texas Instruments OMAP4430 ES2.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2011.12-dirty (Jul 30 2012 - 13:44:03) CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr ** Unable to read "boot.scr" from mmc 0:1 ** reading uImage 4176404 bytes read Booting from mmc0 ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-3.1.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4176340 Bytes = 4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel.
|
|
|
On 2012-07-30 12:49, Jim Abernathy wrote: On 07/30/2012 01:16 PM, Gary Thomas wrote:
On 2012-07-30 11:09, Jim Abernathy wrote:
On 07/30/2012 12:57 PM, Gary Thomas wrote:
On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
statement in local.conf to solves the problem.
What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? The dependency on systemd comes from this recipe: meta-ti/recipes-misc/payload/bonescript.bb
The BBMASK is making bitbake ignore that recipe (you don't need it), hence no dependency.
I got core-image-minimal built without errors, Thanks, now I need to ask some questions about booting that image. I'm assuming that I can follow the instructions on pandaboard.org
for creating the SD card format and just copy the deploy/image/ u-boot, MLO, uImage, and rootfs to the right places and boot the sdcard in the pandaboard. Anyway, that's what I
tried. I'm connected to the panadboard via serial port and the U-Boot works and the uImage seems to be found, but I don't get a login console on the serial port:
U-Boot SPL 2011.12-dirty (Jul 30 2012 - 13:44:03)
Texas Instruments OMAP4430 ES2.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-dirty (Jul 30 2012 - 13:44:03)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4176404 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.1.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4176340 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Start with the obvious - check the bootparams in U-Boot. Break into the boot process and run the 'printenv' command. What's the value of the "console" variable? n.b. I've not tried this exact setup on the PandaBoard. I may have time later today to do so. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 2012-07-30 13:11, Gary Thomas wrote: On 2012-07-30 12:49, Jim Abernathy wrote:
On 07/30/2012 01:16 PM, Gary Thomas wrote:
On 2012-07-30 11:09, Jim Abernathy wrote:
On 07/30/2012 12:57 PM, Gary Thomas wrote:
On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
statement in local.conf to solves the problem.
What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? The dependency on systemd comes from this recipe: meta-ti/recipes-misc/payload/bonescript.bb
The BBMASK is making bitbake ignore that recipe (you don't need it), hence no dependency.
I got core-image-minimal built without errors, Thanks, now I need to ask some questions about booting that image. I'm assuming that I can follow the instructions on pandaboard.org
for creating the SD card format and just copy the deploy/image/ u-boot, MLO, uImage, and rootfs to the right places and boot the sdcard in the pandaboard. Anyway, that's what I
tried. I'm connected to the panadboard via serial port and the U-Boot works and the uImage seems to be found, but I don't get a login console on the serial port:
U-Boot SPL 2011.12-dirty (Jul 30 2012 - 13:44:03)
Texas Instruments OMAP4430 ES2.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-dirty (Jul 30 2012 - 13:44:03)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4176404 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.1.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4176340 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Start with the obvious - check the bootparams in U-Boot. Break into
the boot process and run the 'printenv' command. What's the value of
the "console" variable?
n.b. I've not tried this exact setup on the PandaBoard. I may have time
later today to do so.
I've just verified that this does fail when using yocto:master I'm pretty sure that the problem is related to the use of GCC 4.7.1 - I've had similar problems with ARM kernels & GCC 4.7.1 in the past. I did build yocto:denzil for the PandaBoard and it comes up and mostly works. I've not done extensive checking on this image though. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
|
|
|
On 07/31/2012 07:25 AM, Gary Thomas wrote: On 2012-07-30 13:11, Gary Thomas wrote:
On 2012-07-30 12:49, Jim Abernathy wrote:
On 07/30/2012 01:16 PM, Gary Thomas wrote:
On 2012-07-30 11:09, Jim Abernathy wrote:
On 07/30/2012 12:57 PM, Gary Thomas wrote:
On 2012-07-30 10:50, Jim Abernathy wrote:
On 07/30/2012 10:21 AM, Gary Thomas wrote:
On 2012-07-30 08:11, Jim Abernathy wrote:
On 07/30/2012 09:56 AM, Gary Thomas wrote:
On 2012-07-30 07:48, Jim Abernathy wrote:
On 07/30/2012 09:15 AM, Gary Thomas wrote:
On 2012-07-30 06:53, Jim Abernathy wrote:
I'm on master branch trying to build core-image-minimal for the machine "pandaboard". Besides the basics, I put in a license statement for cloud9 into local.conf.
My bblayer.conf is as follows:
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "5"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/jim/poky/meta \
/home/jim/poky/meta-yocto \
/home/jim/meta-openembedded/meta-oe \
/home/jim/meta-ti \
"
The error I'm getting is:
ERROR: ParseError at /home/jim/meta-ti/recipes-misc/payload/bonescript.bb:5: Could not inherit file classes/systemd.bbclass
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "pandaboard"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120730"
TUNE_FEATURES = "armv7a vfp neon cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:7411158e1f980cd71c432026fa2f68ab80e3541e"
meta-oe = "master:9afc488a1b97bfc5378f139ba04a7a5297b15fdb"
meta-ti = "master:9bc77dff5f84578e259f8225bfa0656d94a2a60a"
ERROR: Nothing PROVIDES 'pseudo-native' Try adding this in local.conf:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
BBMASK by itself didn't solve my particular problem. I'll try the other suggestions and report back. What other problem do you have? That BBMASK should keep bitbake from
trying to parse the recipe mentioned above.
Note: I use these layers with Yocto all the time with that mask...
When I just used the statement:
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
I got the same error as my original post. The only way you could get that same error is if you already have a BBMASK
statement somewhere and this one is being ignored because of the ?= assignment.
So I started with a clean build again. This time I only added the BBMASK statement you suggested. I got the following error:
ERROR: No recipes available for:
/home/jim/meta-openembedded/meta-systemd/meta-gnome/recipes-gnome/gdm/gdm_2.32.2.bbappend
/home/jim/meta-openembedded/meta-systemd/meta-efl/recipes-efl/efl/elsa_svn.bbappend
ERROR: Command execution failed: Exited with 1
I'm guessing the BBMASK needs to call out meta-openembedded/meta-systemd/meta-gnome and meta-efl? Or don't include those layers - meta-systemd isn't needed by your yocto build.
Thanks, that makes more sense now. I removed the layer meta-systemd from bblayers.conf and used the
BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/"
statement in local.conf to solves the problem.
What is really causing the problem? Without it dependencies on meta-systemd are there, but the mask removes that?? Why can you remove a dependency? The dependency on systemd comes from this recipe: meta-ti/recipes-misc/payload/bonescript.bb
The BBMASK is making bitbake ignore that recipe (you don't need it), hence no dependency.
I got core-image-minimal built without errors, Thanks, now I need to ask some questions about booting that image. I'm assuming that I can follow the instructions on pandaboard.org
for creating the SD card format and just copy the deploy/image/ u-boot, MLO, uImage, and rootfs to the right places and boot the sdcard in the pandaboard. Anyway, that's what I
tried. I'm connected to the panadboard via serial port and the U-Boot works and the uImage seems to be found, but I don't get a login console on the serial port:
U-Boot SPL 2011.12-dirty (Jul 30 2012 - 13:44:03)
Texas Instruments OMAP4430 ES2.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-dirty (Jul 30 2012 - 13:44:03)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4176404 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.1.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4176340 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Start with the obvious - check the bootparams in U-Boot. Break into
the boot process and run the 'printenv' command. What's the value of
the "console" variable?
n.b. I've not tried this exact setup on the PandaBoard. I may have time
later today to do so.
I've just verified that this does fail when using yocto:master I'm pretty
sure that the problem is related to the use of GCC 4.7.1 - I've had similar
problems with ARM kernels & GCC 4.7.1 in the past.
I did build yocto:denzil for the PandaBoard and it comes up and mostly works.
I've not done extensive checking on this image though. This problem that I have on denzil with pandaboard is I get the following error: ERROR: ParseError at /home/jim/meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_git.bb:28: Could not inherit file classes/pythonnative.bbclass ERROR: Command execution failed: Traceback (most recent call last): File "/home/jim/poky/bitbake/lib/bb/command.py", line 84, in runAsyncCommand self.cooker.updateCache() File "/home/jim/poky/bitbake/lib/bb/cooker.py", line 1202, in updateCache if not self.parser.parse_next(): File "/home/jim/poky/bitbake/lib/bb/cooker.py", line 1669, in parse_next self.virtuals += len(result) UnboundLocalError: local variable 'result' referenced before assignment Summary: There were 2 ERROR messages shown, returning a non-zero exit code. I already have a BBMASK statement in local.conf: BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor)/" I'm not sure how I add a second statement like: BBMASK ?= ".*/meta-openembedded/meta-oe//recipes-navigation/" Do I use += in both or what??? Jim A
|
|
|
