I build mediatomb and rygel live atom-pc images from today's poky/master + meta-demo/master. I booted mediatomb on the BlackSand and rygel on the netbook. I had to manually start the rygel renderer on the netbook. I didn't see gupnp-av-cp on the rygel image as I expected and the gupnp-universal-cp command failed to start on the netbook (via a sato terminal) complaining about missing icons. If I tried to stabrt this over an ssh - connection, the gupnp-universal-cp started fine (strange).

I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music
from mediatomb on the rygel renderer. (YAY)

What I'd like to see is for gupnp-av-cp to start automatically after the
sato desktop loads on each renderer. This would make each renderer a
standalone player.

So, it's functional (awesome!) and I see these ARs as pending for the demo images:

[ ] add gupnp-av-cp to the rygel image
[ ] start rygel on boot (after networking)
[ ] start gupnp-av-cp after the sato desktop loads on the rygel image
[ ] setup networking on each of the non-nas images to dhcp on eth0

With the above, each image should boot to a functional state with no
manual interference required.

How much of the above is already planned and how much do we need to get
an owner for?

--
Darren Hart
Embedded Linux Kernel

On Thu, 2010-10-21 at 15:44 -0700, Darren Hart wrote:

I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the
netbook. I had to manually start the rygel renderer on the netbook. I
didn't see gupnp-av-cp on the rygel image as I expected and the
gupnp-universal-cp command failed to start on the netbook (via a sato
terminal) complaining about missing icons. If I tried to stabrt this
over an ssh - connection, the gupnp-universal-cp started fine (strange).

I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music
from mediatomb on the rygel renderer. (YAY)

What I'd like to see is for gupnp-av-cp to start automatically after the
sato desktop loads on each renderer. This would make each renderer a
standalone player.

So, it's functional (awesome!) and I see these ARs as pending for the
demo images:

[ ] add gupnp-av-cp to the rygel image

I think this is already done - I have it on my image and it works for
me.

[ ] start rygel on boot (after networking)
[ ] start gupnp-av-cp after the sato desktop loads on the rygel image
[ ] setup networking on each of the non-nas images to dhcp on eth0

eth0 on the rygel image seems to come up ok, it's just the mediatomb
image that doesn't afaics. I'll probably look into this tonight.

I also added a small change in tom/demo that allows the mediatomb image
to do nfs. After doing that, I was able to mount an nfs share from my
laptop on the Black Sand, and have mediatomb add all the media there.

Tom

With the above, each image should boot to a functional state with no
manual interference required.

How much of the above is already planned and how much do we need to get
an owner for?

On Thu, 2010-10-21 at 15:44 -0700, Darren Hart wrote:

I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the
netbook. I had to manually start the rygel renderer on the netbook. I
didn't see gupnp-av-cp on the rygel image as I expected and the
gupnp-universal-cp command failed to start on the netbook (via a sato
terminal) complaining about missing icons. If I tried to stabrt this
over an ssh - connection, the gupnp-universal-cp started fine (strange).

Hmm, I've commits to fix both of those issues in meta-demo master since
at least yesterday morning.b

I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music
from mediatomb on the rygel renderer. (YAY)

Cool!

What I'd like to see is for gupnp-av-cp to start automatically after the
sato desktop loads on each renderer. This would make each renderer a
standalone player.

So, it's functional (awesome!) and I see these ARs as pending for the
demo images:

[ ] add gupnp-av-cp to the rygel image

Already done

[ ] start rygel on boot (after networking)

I'll take this AR

[ ] start gupnp-av-cp after the sato desktop loads on the rygel image

I'll take this AR too

[ ] setup networking on each of the non-nas images to dhcp on eth0

With the above, each image should boot to a functional state with no
manual interference required.

How much of the above is already planned and how much do we need to get
an owner for?

I'll handle the Rygel and gupnp-av-cp ones, they where already on my
list :-)

Cheers,
Joshua
--
Joshua Lock
Intel Open Source Technology Centre

---------------------------------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

On 10/22/2010 12:29 AM, Joshua Lock wrote:

On Thu, 2010-10-21 at 15:44 -0700, Darren Hart wrote:

I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the
netbook. I had to manually start the rygel renderer on the netbook. I
didn't see gupnp-av-cp on the rygel image as I expected and the
gupnp-universal-cp command failed to start on the netbook (via a sato
terminal) complaining about missing icons. If I tried to stabrt this
over an ssh - connection, the gupnp-universal-cp started fine (strange).

Hmm, I've commits to fix both of those issues in meta-demo master since
at least yesterday morning.b

I think my build just has some stale data that the various cleans haven't cleared. I'm going to try some clean builds today.


--
Darren Hart
Embedded Linux Kernel