So now after doing the last pull on meta -raspberrypi. The one to change the kernel version. I have a hdmi output but my boot process block at please wait : booting . Do you have an idea why it is doi

#yocto #raspberrypi0-wifi #honister

I do am building image on a raspberry pi zero w. After flashing the image on the raspberry, i don get anything on the screen. I am doing this the honister branch. I had the gatesgarth branch and it wa

#yocto #raspberrypi0-wifi #honister

Hello everyone, i hope you are doing well. i am using the command vcgencmd with an image yocto on a raspberry pi zero. I get it by adding the userland recipe. I can get the camera status with the comm

#yocto #vcgencmd #raspberrypi

Hello, I writed a conf file to get the raspberrypi0-2 to work in 32 mode to have the camera packages raspivid. It works just fine. But the problem I don't have wlan0 interface. I tried everything but

Hi, in the first place i succeeded to add raspivid to my image yocto of raspberrypi0-wifi. I did so by adding the userland recipe. But when i try doing so with raspberrypi4-64. Idon't get raspivid whe

Yeah it works. I have yet to test the image on my raspberry pi Monday in the office. But I finished the build. I will tested Monday and i will tell you. I have a warning : image-1.0-r0 do_rootfs: The

#av1 #armv6 #raspberrypi #neon

Sorry to annoying you with my question but how do i find where HAVE_NEON is set ? Best regards, Safouane

#av1 #armv6 #raspberrypi #neon

I have an erreur: | /workdir/tep-cam-rpi-yocto/rpi-build-gatesgarth/tmp/work/arm1176jzfshf-vfp-poky-linux-gnueabi/aom/2.0.0-r0/git/av1/common/arm/mem_neon.h:525:24: note: called from here | 525 | cons

#av1 #armv6 #raspberrypi #neon

I succed in removing callconvention-hard from TUNE_FEATURES ? But i have the same problem. I am pretty sure that i get get it working if i add neon to the TUNE_FEATURES. Something like this TUNE_FEATU

#av1 #armv6 #raspberrypi #neon

Yes I will check it. Do you know how to remove callconvention-hard from TUNE_FEATURES ? Best regards, Safouane

#av1 #armv6 #raspberrypi #neon

#av1 #armv6 #raspberrypi #neon

#av1 #armv6 #raspberrypi #neon

Hello folks, I have an issue integrating av1 in yocto. I get the compile error "compiling simd-neon.h requires -mfpu=neon or equivalent". The problem is that i use armv6 (raspberrypi zero w) so i can'

#av1 #armv6 #raspberrypi #neon

Hello folks, i am trying to compile my image but we could see that i am missing neon fpu in my image. I can't use this feature because i have a raspberry pi zero w and i have armv6 on this raspberrypi

#raspberrypi #neon #yocto #armv6

Hello, I wanted to know how to add Alliance for Open Media - AV1 Codec Library (aom-plugins) gstreamer1.0-plugins-bad recipe to my image ? the Alliance for Open Media - AV1 Codec Library are in the ao

#aom #av1 #yocto #gstreamer

Bonjour, j'essaye d'ajouter le aom plugin au niveau de la gstreamer1.0-plugins-bad. J'ai basculé sur gatesgarth version. Je commence à faire lebuild. J'avais un problème de lisence. Je l'ai résolu. Et

#yocto #gstreamer #aom #av1

Bonjour, j'essaye d'ajouter le aom plugin au niveau de la gstreamer1.0-plugins-bad. J'ai basculé sur gatesgarth version. Je commence à faire lebuild. J'avais un problème de lisence. Je l'ai résolu. Et

#yocto #gstreamer #aom #av1