yocto@lists.yoctoproject.org

Home Messages Hashtags Subgroups

Export Group Data

Between

and

Re: [meta-raspberrypi] Problem with RPI_USE_U_BOOT with RaspberryPi4 Matthias Klein #55811 Hello Jean-Philippe, >I'm trying to create a simple image that uses the RPI_USE_U_BOOT option but the pi hangs with the rainbow image. I'm able to generate bootable images when not using the RPI_USE_U_BOOT option (but I need to use swupdate). >I have the same problem with using the Hardknott branch, leading me to think the problem is not the layer but the way I use it. For me the combination of raspberrypi4-64 machine, U-Boot and RAUC (instead of swupdate) works. I think the raspberrypi4 should also work (but haven't tested it). I built and tested my (Poky master branch based) image this morning: https://github.com/matthiasklein/meta-yocto-coffee-rpi I don't use HDMI output though, but a serial console (ENABLE_UART = "1"). Best regards, Matthias
More All Messages By This Member
[meta-raspberrypi] Problem with RPI_USE_U_BOOT with RaspberryPi4 Jean-Philippe Lebel #55810 Hello, I'm trying to create a simple image that uses the RPI_USE_U_BOOT option but the pi hangs with the rainbow image. I'm able to generate bootable images when not using the RPI_USE_U_BOOT option (but I need to use swupdate). I have the same problem with using the Hardknott branch, leading me to think the problem is not the layer but the way I use it. For my last test, I used the latest meta-raspberrypi without any modification. In other words, I'm using the default/basic configuration. the default local.conf file has been edited to add the following two lines at the end MACHINE = 'raspberrypi4' RPI_USE_U_BOOT = "1" I'm building the image using > bitbake core-image-base And I'm burning the generated .wic image to my sd card. What am I missing? Is there any other configuration I must do? Thanks
More All Messages By This Member
Reproducible build website broken (CORS setting on git.yoctoproject.org?) Joshua Watt #55809 Michael, I noticed that the https://www.yoctoproject.org/reproducible-build-results/ website went down (it always shows "Error fetching test results"). I did a little debugging and I think that the CORS setting on git.yoctoproject.org is not allowing www.yoctoproject.org to request the data anymore. I thought we had fixed this at one point in the past and maybe it got lost somewhere along the way? If that's something we can fix, that would be great, otherwise we might need to look into another solution for fetching the reproducibility data. Thanks, Joshua Watt
More All Messages By This Member
Re: [docs] [yocto] How to unpack a .tgz archive in a .zip file? Michael Opdenacker #55808 Hi Quentin, Thanks for the advice! On 1/11/22 7:46 PM, Quentin Schulz wrote: Hi Michael, On January 11, 2022 11:38:06 AM GMT+01:00, Michael Opdenacker <michael.opdenacker@...> wrote: Hello I'm working on adding the wiki guidelines for dealing with pre-compiled libraries (https://wiki.yoctoproject.org/wiki/TipsAndTricks/Packaging_Prebuilt_Libraries#Versioned_Libraries) into the main documentation. I'm trying to test the example recipe, but the latest pre-compiled versions of libft4422.so are now available in https://ftdichip.com/wp-content/uploads/2021/01/libft4222-linux-1.4.4.44.zip, which actually contains a .tgz file! I know that's absurd, but how would you handle this case? Through a custom "do_unpack" task in the recipe? IMO that makes it unsuitable for the docs as we strive to have "simple" examples and having some custom unpack task seems a bit too much to me. Anyway, just my 2¢ and I don't have any other prebuilt lib to suggest as replacement right now. Right, I was thinking of leaving this aside, and just working with a local archive instead, as fetching the files is not the primary concern here. Back to the topic: I think you could have an :append for do_unpack and probably call oe_unpack ( https://github.com/openembedded/openembedded/blob/fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649/classes/base.bbclass#L158) on this specific file (after it's been unzipped), or even call unpack_file from the OE libs directly ( https://github.com/openembedded/openembedded/blob/fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649/lib/oe/unpack.py#L50) like oe_unpack is doing. Be aware though that since it is a Python task, your :append shall be Python code too. Maybe there's another way but I don't see it right now. Many thanks. It's good to have this idea at least documented in the mailing list archives. That's good for my own understanding too. I didn't think about appends. Thanks again Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
More All Messages By This Member
Re: How to unpack a .tgz archive in a .zip file? Quentin Schulz #55807 Hi Michael, On January 11, 2022 11:38:06 AM GMT+01:00, Michael Opdenacker <michael.opdenacker@...> wrote: Hello I'm working on adding the wiki guidelines for dealing with pre-compiled libraries (https://wiki.yoctoproject.org/wiki/TipsAndTricks/Packaging_Prebuilt_Libraries#Versioned_Libraries) into the main documentation. I'm trying to test the example recipe, but the latest pre-compiled versions of libft4422.so are now available in https://ftdichip.com/wp-content/uploads/2021/01/libft4222-linux-1.4.4.44.zip, which actually contains a .tgz file! I know that's absurd, but how would you handle this case? Through a custom "do_unpack" task in the recipe? IMO that makes it unsuitable for the docs as we strive to have "simple" examples and having some custom unpack task seems a bit too much to me. Anyway, just my 2¢ and I don't have any other prebuilt lib to suggest as replacement right now. Back to the topic: I think you could have an :append for do_unpack and probably call oe_unpack ( https://github.com/openembedded/openembedded/blob/fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649/classes/base.bbclass#L158) on this specific file (after it's been unzipped), or even call unpack_file from the OE libs directly ( https://github.com/openembedded/openembedded/blob/fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649/lib/oe/unpack.py#L50) like oe_unpack is doing. Be aware though that since it is a Python task, your :append shall be Python code too. Maybe there's another way but I don't see it right now. Cheers, Quentin Thanks in advance for your insights... Cheers Michael.
More All Messages By This Member
[PATCH 3/3] poky: set default kernel to 5.15 Bruce Ashfield #55806 From: Bruce Ashfield <bruce.ashfield@...> 5.14 is no longer actively maintained, so we bump our default to the 5.15 LTS. Signed-off-by: Bruce Ashfield <bruce.ashfield@...> --- meta-poky/conf/distro/poky-tiny.conf \| 2 +- meta-poky/conf/distro/poky.conf \| 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/meta-poky/conf/distro/poky-tiny.conf b/meta-poky/conf/distro/poky-tiny.conf index 756c65a2f9..b6c4eeccd0 100644 --- a/meta-poky/conf/distro/poky-tiny.conf +++ b/meta-poky/conf/distro/poky-tiny.conf @@ -43,7 +43,7 @@ FULL_OPTIMIZATION="-Os -pipe ${DEBUG_FLAGS}" # Distro config is evaluated after the machine config, so we have to explicitly # set the kernel provider to override a machine config. PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny" -PREFERRED_VERSION_linux-yocto-tiny ?= "5.14%" +PREFERRED_VERSION_linux-yocto-tiny ?= "5.15%" # We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny #POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" diff --git a/meta-poky/conf/distro/poky.conf b/meta-poky/conf/distro/poky.conf index b92784fdc4..2dc3606ae5 100644 --- a/meta-poky/conf/distro/poky.conf +++ b/meta-poky/conf/distro/poky.conf @@ -19,8 +19,8 @@ POKY_DEFAULT_EXTRA_RRECOMMENDS = "kernel-module-af-packet" DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} ${POKY_DEFAULT_DISTRO_FEATURES}" -PREFERRED_VERSION_linux-yocto ?= "5.14%" -PREFERRED_VERSION_linux-yocto-rt ?= "5.14%" +PREFERRED_VERSION_linux-yocto ?= "5.15%" +PREFERRED_VERSION_linux-yocto-rt ?= "5.15%" SDK_NAME = "${DISTRO}-${TCLIBC}-${SDKMACHINE}-${IMAGE_BASENAME}-${TUNE_PKGARCH}-${MACHINE}" SDKPATHINSTALL = "/opt/${DISTRO}/${SDK_VERSION}" -- 2.19.1
More All Messages By This Member
[PATCH 2/3] yocto-bsp/5.14: drop recipes Bruce Ashfield #55805 From: Bruce Ashfield <bruce.ashfield@...> 5.14 has been removed from core, so we drop our bbappend. 5.15 is now the default kernel version for the reference BSPs. Signed-off-by: Bruce Ashfield <bruce.ashfield@...> --- .../linux/linux-yocto_5.14.bbappend \| 23 ------------------- 1 file changed, 23 deletions(-) delete mode 100644 meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.14.bbappend diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.14.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.14.bbappend deleted file mode 100644 index af4a7392f0..0000000000 --- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.14.bbappend +++ /dev/null @@ -1,23 +0,0 @@ -KBRANCH:genericx86 = "v5.14/standard/base" -KBRANCH:genericx86-64 = "v5.14/standard/base" -KBRANCH:edgerouter = "v5.14/standard/edgerouter" -KBRANCH:beaglebone-yocto = "v5.14/standard/beaglebone" - -KMACHINE:genericx86 ?= "common-pc" -KMACHINE:genericx86-64 ?= "common-pc-64" -KMACHINE:beaglebone-yocto ?= "beaglebone" - -SRCREV_machine:genericx86 ?= "9d5572038eacda2e2a86e3f743f35ec415319fb4" -SRCREV_machine:genericx86-64 ?= "9d5572038eacda2e2a86e3f743f35ec415319fb4" -SRCREV_machine:edgerouter ?= "7ae156be3bdbf033839f7f3ec2e9a0ffffb18818" -SRCREV_machine:beaglebone-yocto ?= "7ae156be3bdbf033839f7f3ec2e9a0ffffb18818" - -COMPATIBLE_MACHINE:genericx86 = "genericx86" -COMPATIBLE_MACHINE:genericx86-64 = "genericx86-64" -COMPATIBLE_MACHINE:edgerouter = "edgerouter" -COMPATIBLE_MACHINE:beaglebone-yocto = "beaglebone-yocto" - -LINUX_VERSION:genericx86 = "5.14.21" -LINUX_VERSION:genericx86-64 = "5.14.21" -LINUX_VERSION:edgerouter = "5.14.6" -LINUX_VERSION:beaglebone-yocto = "5.14.6" -- 2.19.1
More All Messages By This Member
[PATCH 1/3] yocto-bsp: change default to 5.15 Bruce Ashfield #55804 From: Bruce Ashfield <bruce.ashfield@...> 5.14 has been removed from core, so we change our default version to the 5.15 LTS kernel. Signed-off-by: Bruce Ashfield <bruce.ashfield@...> --- meta-yocto-bsp/conf/machine/beaglebone-yocto.conf \| 2 +- meta-yocto-bsp/conf/machine/edgerouter.conf \| 2 +- meta-yocto-bsp/conf/machine/include/genericx86-common.inc \| 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf b/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf index b3d960a8cd..a5cb16cd93 100644 --- a/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf +++ b/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf @@ -24,7 +24,7 @@ SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyO0 115200;ttyAMA0" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "5.14%" +PREFERRED_VERSION_linux-yocto ?= "5.15%" KERNEL_IMAGETYPE = "zImage" KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb" diff --git a/meta-yocto-bsp/conf/machine/edgerouter.conf b/meta-yocto-bsp/conf/machine/edgerouter.conf index 32be4b9c39..249864e9ce 100644 --- a/meta-yocto-bsp/conf/machine/edgerouter.conf +++ b/meta-yocto-bsp/conf/machine/edgerouter.conf @@ -11,7 +11,7 @@ KERNEL_ALT_IMAGETYPE = "vmlinux.bin" KERNEL_IMAGE_STRIP_EXTRA_SECTIONS = ".comment" PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "5.14%" +PREFERRED_VERSION_linux-yocto ?= "5.15%" SERIAL_CONSOLES = "115200;ttyS0" USE_VT ?= "0" diff --git a/meta-yocto-bsp/conf/machine/include/genericx86-common.inc b/meta-yocto-bsp/conf/machine/include/genericx86-common.inc index 4651b37e5d..8c5e5522bc 100644 --- a/meta-yocto-bsp/conf/machine/include/genericx86-common.inc +++ b/meta-yocto-bsp/conf/machine/include/genericx86-common.inc @@ -2,7 +2,7 @@ include conf/machine/include/x86/x86-base.inc require conf/machine/include/x86/qemuboot-x86.inc MACHINE_FEATURES += "wifi efi pcbios" -PREFERRED_VERSION_linux-yocto ?= "5.14%" +PREFERRED_VERSION_linux-yocto ?= "5.15%" PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" XSERVER ?= "${XSERVER_X86_BASE} \ -- 2.19.1
More All Messages By This Member
Yocto Project Status WW02`22 Stephen Jolley #55803 Current Dev Position: YP 3.5 M2 Next Deadline: 17th Jan. 2022 YP 3.5 M2 build Next Team Meetings: Bug Triage meeting Thursday Jan. 13th 7:30 am PDT (https://zoom.us/j/454367603?pwd=ZGxoa2ZXL3FkM3Y0bFd5aVpHVVZ6dz09) Monthly Project Meeting Tuesday Feb. 1st at 8 am PDT (https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09 ) Weekly Engineering Sync Tuesday Jan. 11th at 8 am PDT (https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09 ) Twitch - See https://www.twitch.tv/theyoctojester Key Status/Updates: YP 3.5 M2 is due to build next week The autobuilder updates have now mostly stabilized and we are potentially seeing a reduction in intermittent failures. On modern kernels, we now have the capability within bitbake to disable networking on a per task basis without extra user privileges. There is discussion on the mailing list on how we should enable this and whether it should be on an opt-in or opt-out basis. A second patchset has been proposed for discussion where tasks using the network would need to be explicitly marked as such. The openssl and webkit reproducibility issues have been fixed. We have also fixed the reproducibility issues with rust-llvm and golang. With ruby docs disabled, this means we have no reproducibility patch exclusions in OE-Core, thanks Alex Kanavin! The “oldest kernel” setting used for qemu which is architecture specific is causing issues for allarch packages but the various patches to fix it have also caused other issues and highlighted gaps in our sstate hash tests. There are hopefully now patches ready to merge to fix these issues and the gaps in testing. CVE issues against master have risen from 7 to 17 so help in addressing those issues would be very welcome. Intermittent issues continue to be at record high levels and help is very much welcome in trying to resolve them. You can see the list of failures we’re continuing to see by searching for the “AB-INT” tag in bugzilla: https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT Ways to contribute: There are bugs identified as possible for newcomers to the project: https://wiki.yoctoproject.org/wiki/Newcomers There are bugs that are currently unassigned for YP 3.5. See: https://wiki.yoctoproject.org/wiki/Bug_Triage#Medium.2B_3.5_Unassigned_Enhancements.2FBugs We’d welcome new maintainers for recipes in OE-Core. Please see the list at: http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/conf/distro/include/maintainers.inc and discuss with the existing maintainer, or ask on the OE-Core mailing list. We will likely move a chunk of these to “Unassigned” soon to help facilitate this. YP 3.5 Milestone Dates: YP 3.5 M2 build date 2022/01/17 YP 3.5 M2 Release date 2022/01/28 YP 3.5 M3 build date 2022/02/21 YP 3.5 M3 Release date 2022/03/04 YP 3.5 M4 build date 2022/04/04 YP 3.5 M4 Release date 2022/04/29 Upcoming dot releases: YP 3.1.14 build date 2022/01/24 YP 3.1.14 Release date 2022/02/04 YP 3.4.2 build date 2022/02/07 YP 3.4.2 Release date 2022/02/18 YP 3.3.5 build date 2022/02/14 YP 3.3.5 Release date 2022/02/25 YP 3.1.15 build date 2022/03/14 YP 3.1.15 Release date 2022/03/25 YP 3.4.3 build date 2022/03/21 YP 3.4.3 Release date 2022/04/01 YP 3.3.6 build date 2022/03/28 YP 3.3.6 Release date 2022/04/08 YP 3.1.16 build date 2022/04/25 YP 3.1.16 Release date 2022/05/06 Tracking Metrics: WDD 2655 (last week 2653) (https://wiki.yoctoproject.org/charts/combo.html) OE-Core/Poky Patch Metrics Total patches found: 1234 (last week 1227) Patches in the Pending State: 348 (28%) [last week 347 (28%)] The Yocto Project’s technical governance is through its Technical Steering Committee, more information is available at: https://wiki.yoctoproject.org/wiki/TSC The Status reports are now stored on the wiki at: https://wiki.yoctoproject.org/wiki/Weekly_Status [If anyone has suggestions for other information you’d like to see on this weekly status update, let us know!] Thanks, *Stephen K. Jolley* Yocto Project Program Manager ( Cell: (208) 244-4460 * Email: sjolley.yp.pm@...
More All Messages By This Member
Re: [docs] No more nightly builds? Richard Purdie #55802 On Tue, 2022-01-11 at 12:12 +0100, Michael Opdenacker wrote: On 1/11/22 12:09 PM, Richard Purdie wrote: On Tue, 2022-01-11 at 12:01 +0100, Michael Opdenacker wrote: Hi Richard, On 1/11/22 11:41 AM, Richard Purdie wrote: On Tue, 2022-01-11 at 10:47 +0100, Michael Opdenacker wrote: Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). We do run them but they're "a-quick" six nights a week with an "a-full" on a weekend. The results of all non-release builds go here: https://autobuilder.yocto.io/pub/non-release/ The "nightly" builds don't produce shared artefacts any more, just test result files and reports. Right. So the documentation can stop referring to them as a way to get the latest code. I think it should be replaced with something about "latest test results"? Maybe, but then in the test manual, because the section referring to nightly builds about getting Yocto Project code (https://docs.yoctoproject.org/dev-manual/start.html#locating-yocto-project-source-files). Right, in that context I agree it can be removed and probably wasn't that useful anyway. Cheers, Richard
More All Messages By This Member
Re: [docs] No more nightly builds? Michael Opdenacker #55801 On 1/11/22 12:09 PM, Richard Purdie wrote: On Tue, 2022-01-11 at 12:01 +0100, Michael Opdenacker wrote: Hi Richard, On 1/11/22 11:41 AM, Richard Purdie wrote: On Tue, 2022-01-11 at 10:47 +0100, Michael Opdenacker wrote: Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). We do run them but they're "a-quick" six nights a week with an "a-full" on a weekend. The results of all non-release builds go here: https://autobuilder.yocto.io/pub/non-release/ The "nightly" builds don't produce shared artefacts any more, just test result files and reports. Right. So the documentation can stop referring to them as a way to get the latest code. I think it should be replaced with something about "latest test results"? Maybe, but then in the test manual, because the section referring to nightly builds about getting Yocto Project code (https://docs.yoctoproject.org/dev-manual/start.html#locating-yocto-project-source-files). Thanks Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
More All Messages By This Member
Re: [docs] No more nightly builds? Richard Purdie #55800 On Tue, 2022-01-11 at 12:01 +0100, Michael Opdenacker wrote: Hi Richard, On 1/11/22 11:41 AM, Richard Purdie wrote: On Tue, 2022-01-11 at 10:47 +0100, Michael Opdenacker wrote: Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). We do run them but they're "a-quick" six nights a week with an "a-full" on a weekend. The results of all non-release builds go here: https://autobuilder.yocto.io/pub/non-release/ The "nightly" builds don't produce shared artefacts any more, just test result files and reports. Right. So the documentation can stop referring to them as a way to get the latest code. I think it should be replaced with something about "latest test results"? Cheers, Richard
More All Messages By This Member
Re: [docs] No more nightly builds? Michael Opdenacker #55799 Hi Richard, On 1/11/22 11:41 AM, Richard Purdie wrote: On Tue, 2022-01-11 at 10:47 +0100, Michael Opdenacker wrote: Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). We do run them but they're "a-quick" six nights a week with an "a-full" on a weekend. The results of all non-release builds go here: https://autobuilder.yocto.io/pub/non-release/ The "nightly" builds don't produce shared artefacts any more, just test result files and reports. Right. So the documentation can stop referring to them as a way to get the latest code. Thanks Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
More All Messages By This Member
Re: [docs] No more nightly builds? Richard Purdie #55798 On Tue, 2022-01-11 at 10:47 +0100, Michael Opdenacker wrote: Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). We do run them but they're "a-quick" six nights a week with an "a-full" on a weekend. The results of all non-release builds go here: https://autobuilder.yocto.io/pub/non-release/ The "nightly" builds don't produce shared artefacts any more, just test result files and reports. Cheers, Richard
More All Messages By This Member
How to unpack a .tgz archive in a .zip file? Michael Opdenacker #55797 Hello I'm working on adding the wiki guidelines for dealing with pre-compiled libraries (https://wiki.yoctoproject.org/wiki/TipsAndTricks/Packaging_Prebuilt_Libraries#Versioned_Libraries) into the main documentation. I'm trying to test the example recipe, but the latest pre-compiled versions of libft4422.so are now available in https://ftdichip.com/wp-content/uploads/2021/01/libft4222-linux-1.4.4.44.zip, which actually contains a .tgz file! I know that's absurd, but how would you handle this case? Through a custom "do_unpack" task in the recipe? Thanks in advance for your insights... Cheers Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
More All Messages By This Member
No more nightly builds? Michael Opdenacker #55796 Greetings, Do we still have nightly builds? I cannot find them anywhere, but the documentation still refer to a broken location (https://autobuilder.yocto.io/pub/nightly/). I'll be happy to remove the corresponding chapter (https://docs.yoctoproject.org/dev-manual/start.html#accessing-nightly-builds) if indeed we no longer produce such builds. Cheers Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
More All Messages By This Member
Re: How to clean the cache for a package? Tony He #55795 Thanks a lot. This is root cause. I did not update the SRCREV because I have not added this SRCREV in my recipe. Tony Chen, Qi <Qi.Chen@...> 于2022年1月11日周二 14:28写道： toggle quoted messageShow quoted text In theory, there's no need to run 'bitbake -c clean'. Did you update the SRCREV? It would be easier if you could share some info of your recipe. Regards, Qi -----Original Message----- From: yocto@... <yocto@...> On Behalf Of Tony He Sent: Tuesday, January 11, 2022 2:12 PM To: yocto@... Subject: [yocto] How to clean the cache for a package? Hi, I'm new to yocto. I write a reciple for my own package. The source code of package is in my PC and maintained by GIT. When I change the source code of the package, I need to compile this package again with "bitbake -c clean package" and "bitbake -c compile package". However, even though I can see the code in the folder downloads/git2/package.git is updated, but bitbake still use the last commit of the git repo to compile. After debugging, I found the old commit ID is stored in build-project/cache/bb_persist_data.sqlite3. Is this normal? Is it caused by my own wrong reciple or is there any command to clean the cache for a package? Thank you! Tony
More All Messages By This Member
Re: How to clean the cache for a package? Chen Qi #55794 In theory, there's no need to run 'bitbake -c clean'. Did you update the SRCREV? It would be easier if you could share some info of your recipe. Regards, Qi toggle quoted messageShow quoted text -----Original Message----- From: yocto@... <yocto@...> On Behalf Of Tony He Sent: Tuesday, January 11, 2022 2:12 PM To: yocto@... Subject: [yocto] How to clean the cache for a package? Hi, I'm new to yocto. I write a reciple for my own package. The source code of package is in my PC and maintained by GIT. When I change the source code of the package, I need to compile this package again with "bitbake -c clean package" and "bitbake -c compile package". However, even though I can see the code in the folder downloads/git2/package.git is updated, but bitbake still use the last commit of the git repo to compile. After debugging, I found the old commit ID is stored in build-project/cache/bb_persist_data.sqlite3. Is this normal? Is it caused by my own wrong reciple or is there any command to clean the cache for a package? Thank you! Tony
More All Messages By This Member
How to clean the cache for a package? Tony He #55793 Hi, I'm new to yocto. I write a reciple for my own package. The source code of package is in my PC and maintained by GIT. When I change the source code of the package, I need to compile this package again with "bitbake -c clean package" and "bitbake -c compile package". However, even though I can see the code in the folder downloads/git2/package.git is updated, but bitbake still use the last commit of the git repo to compile. After debugging, I found the old commit ID is stored in build-project/cache/bb_persist_data.sqlite3. Is this normal? Is it caused by my own wrong reciple or is there any command to clean the cache for a package? Thank you! Tony
More All Messages By This Member
Re: [meta-zephyr][PATCH] meta-zephyr-bsp: Add autogenerated machines. Naveen Saini #55792 Hi Eilis, Please generate patches with subject-prefix 'PATCH v3' after handling @Jon Mason comments ! Regards, Naveen toggle quoted messageShow quoted text -----Original Message----- From: yocto@... <yocto@...> On Behalf Of Jon Mason Sent: Tuesday, January 11, 2022 8:07 AM To: Eilís Ní Fhlannagáin <pidge@...> Cc: yocto@...; Saini, Naveen Kumar <naveen.kumar.saini@...>; Eilís Ní Fhlannagáin <elizabeth.flanagan@...> Subject: Re: [yocto] [meta-zephyr][PATCH] meta-zephyr-bsp: Add autogenerated machines. On Mon, Jan 10, 2022 at 1:16 PM Eilís Ní Fhlannagáin <pidge@...> wrote: From: Eilís Ní Fhlannagáin <elizabeth.flanagan@...> This commit adds 382 autogenerated machines generated via generate-zephyr-machines.bb. These machines have obviously not all been tested due to hardware access, but should work out of box. Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@...> --- .../conf/machine/96b-aerocore2.conf \| 22 +++++++++++++++++++ .../conf/machine/96b-argonkey.conf \| 22 +++++++++++++++++++ .../conf/machine/96b-carbon-nrf51.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/96b-carbon.conf \| 22 +++++++++++++++++++ .../conf/machine/96b-meerkat96.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/96b-neonkey.conf \| 22 +++++++++++++++++++ .../conf/machine/96b-stm32-sensor-mez.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/96b-wistrio.conf \| 22 +++++++++++++++++++ .../conf/machine/acrn-ehl-crb.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/acrn.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus-bee-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus-bee.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus-som-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus-som.conf \| 22 +++++++++++++++++++ .../conf/machine/actinius-icarus.conf \| 22 +++++++++++++++++++ .../adafruit-feather-m0-basic-proto.conf \| 22 +++++++++++++++++++ .../machine/adafruit-feather-nrf52840.conf \| 22 +++++++++++++++++++ .../machine/adafruit-feather-stm32f405.conf \| 22 +++++++++++++++++++ .../adafruit-itsybitsy-m4-express.conf \| 22 +++++++++++++++++++ .../conf/machine/adafruit-trinket-m0.conf \| 22 +++++++++++++++++++ .../conf/machine/adp-xc7k-ae350.conf \| 22 +++++++++++++++++++ .../conf/machine/altera-max10.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/arduino-due.conf \| 22 +++++++++++++++++++ .../conf/machine/arduino-nano-33-iot.conf \| 22 +++++++++++++++++++ .../conf/machine/arduino-zero.conf \| 22 +++++++++++++++++++ .../machine/arty-a7-arm-designstart-m1.conf \| 22 +++++++++++++++++++ .../machine/arty-a7-arm-designstart-m3.conf \| 22 +++++++++++++++++++ .../conf/machine/atsamd20-xpro.conf \| 22 +++++++++++++++++++ .../conf/machine/atsamd21-xpro.conf \| 22 +++++++++++++++++++ .../conf/machine/atsame54-xpro.conf \| 22 +++++++++++++++++++ .../conf/machine/atsamr21-xpro.conf \| 22 +++++++++++++++++++ .../conf/machine/b-l072z-lrwan1.conf \| 22 +++++++++++++++++++ .../conf/machine/b-l4s5i-iot01a.conf \| 22 +++++++++++++++++++ .../conf/machine/b-u585i-iot02a.conf \| 22 +++++++++++++++++++ .../conf/machine/bbc-microbit-v2.conf \| 22 +++++++++++++++++++ .../conf/machine/bbc-microbit.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bcm958401m2.conf \| 22 +++++++++++++++++++ .../conf/machine/bcm958402m2-a72.conf \| 22 +++++++++++++++++++ .../conf/machine/bcm958402m2-m7.conf \| 22 +++++++++++++++++++ .../machine/beaglev-starlight-jh7100.conf \| 22 +++++++++++++++++++ .../conf/machine/bl5340-dvk-cpuapp-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/bl5340-dvk-cpuapp.conf \| 22 +++++++++++++++++++ .../conf/machine/bl5340-dvk-cpunet.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bl652-dvk.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bl653-dvk.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bl654-dvk.conf \| 22 +++++++++++++++++++ .../conf/machine/bl654-sensor-board.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bl654-usb.conf \| 22 +++++++++++++++++++ .../conf/machine/black-f407ve.conf \| 22 +++++++++++++++++++ .../conf/machine/black-f407zg-pro.conf \| 22 +++++++++++++++++++ .../conf/machine/blackpill-f401ce.conf \| 22 +++++++++++++++++++ .../conf/machine/blackpill-f411ce.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bt510.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/bt610.conf \| 22 +++++++++++++++++++ .../conf/machine/cc1352r-sensortag.conf \| 22 +++++++++++++++++++ .../conf/machine/cc1352r1-launchxl.conf \| 22 +++++++++++++++++++ .../conf/machine/cc26x2r1-launchxl.conf \| 22 +++++++++++++++++++ .../conf/machine/cc3220sf-launchxl.conf \| 22 +++++++++++++++++++ .../conf/machine/cc3235sf-launchxl.conf \| 22 +++++++++++++++++++ .../circuitdojo-feather-nrf9160-ns.conf \| 22 +++++++++++++++++++ .../machine/circuitdojo-feather-nrf9160.conf \| 22 +++++++++++++++++++ .../conf/machine/colibri-imx7d-m4.conf \| 22 +++++++++++++++++++ .../machine/contextualelectronics-abc.conf \| 22 +++++++++++++++++++ .../conf/machine/cy8ckit-062-ble-m0.conf \| 22 +++++++++++++++++++ .../conf/machine/cy8ckit-062-ble-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/cy8ckit-062-wifi-bt-m0.conf \| 22 +++++++++++++++++++ .../conf/machine/cy8ckit-062-wifi-bt-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/decawave-dwm1001-dev.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/degu-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/disco-l475-iot1.conf \| 22 +++++++++++++++++++ .../conf/machine/dragino-lsn50.conf \| 22 +++++++++++++++++++ .../conf/machine/dragino-nbsn95.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32gg-slwstk6121a.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32gg-stk3701a.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32hg-slstk3400a.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32pg-stk3401a.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32pg-stk3402a-jg.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32pg-stk3402a.conf \| 22 +++++++++++++++++++ .../conf/machine/efm32wg-stk3800.conf \| 22 +++++++++++++++++++ .../conf/machine/efr32-radio-brd4104a.conf \| 22 +++++++++++++++++++ .../conf/machine/efr32-radio-brd4180a.conf \| 22 +++++++++++++++++++ .../conf/machine/efr32-radio-brd4250b.conf \| 22 +++++++++++++++++++ .../conf/machine/efr32-radio-brd4255a.conf \| 22 +++++++++++++++++++ .../conf/machine/efr32mg-sltb004a.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/ehl-crb.conf \| 22 +++++++++++++++++++ .../conf/machine/em-starterkit-em11d.conf \| 22 +++++++++++++++++++ .../conf/machine/em-starterkit-em7d-v22.conf \| 22 +++++++++++++++++++ .../conf/machine/em-starterkit-em7d.conf \| 22 +++++++++++++++++++ .../conf/machine/em-starterkit.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp-em4.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp-em5d.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp-em6.conf \| 22 +++++++++++++++++++ .../conf/machine/emsdp-em7d-esp.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp-em7d.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp-em9d.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/emsdp.conf \| 22 +++++++++++++++++++ .../conf/machine/esp32c3-devkitm.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/faze.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/frdm-k22f.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/frdm-k64f.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/frdm-k82f.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/frdm-kl25z.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/frdm-kw41z.conf \| 22 +++++++++++++++++++ .../conf/machine/fvp-base-revc-2xaemv8a.conf \| 22 +++++++++++++++++++ .../conf/machine/fvp-baser-aemv8r-smp.conf \| 22 +++++++++++++++++++ .../conf/machine/fvp-baser-aemv8r.conf \| 22 +++++++++++++++++++ .../conf/machine/google-kukui.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/gr716a-mini.conf \| 22 +++++++++++++++++++ .../conf/machine/hexiwear-k64.conf \| 22 +++++++++++++++++++ .../conf/machine/hexiwear-kw40z.conf \| 22 +++++++++++++++++++ .../conf/machine/hifive-unleashed.conf \| 22 +++++++++++++++++++ .../conf/machine/hifive-unmatched.conf \| 22 +++++++++++++++++++ .../conf/machine/hifive1-revb.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/hifive1.conf \| 22 +++++++++++++++++++ .../conf/machine/holyiot-yj16019.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/hsdk-2cores.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/hsdk.conf \| 22 +++++++++++++++++++ .../conf/machine/intel-adsp-cavs15.conf \| 22 +++++++++++++++++++ .../conf/machine/intel-adsp-cavs18.conf \| 22 +++++++++++++++++++ .../conf/machine/intel-adsp-cavs20.conf \| 22 +++++++++++++++++++ .../conf/machine/intel-adsp-cavs25.conf \| 22 +++++++++++++++++++ .../conf/machine/intel-s1000-crb.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/iotdk.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/ip-k66f.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/legend.conf \| 22 +++++++++++++++++++ .../conf/machine/litex-vexriscv.conf \| 22 +++++++++++++++++++ .../conf/machine/lora-e5-dev-board.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso11u68.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso54114-m0.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso54114-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso55s16.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso55s28.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso55s69-cpu0.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso55s69-cpu1.conf \| 22 +++++++++++++++++++ .../conf/machine/lpcxpresso55s69-ns.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/m2gl025-miv.conf \| 22 +++++++++++++++++++ .../conf/machine/mec1501modular-assy6885.conf \| 22 +++++++++++++++++++ .../conf/machine/mec15xxevb-assy6853.conf \| 22 +++++++++++++++++++ .../conf/machine/mec172xevb-assy6906.conf \| 22 +++++++++++++++++++ .../conf/machine/mec2016evb-assy6797.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mercury-xu.conf \| 22 +++++++++++++++++++ .../conf/machine/mikroe-clicker-2.conf \| 22 +++++++++++++++++++ .../machine/mikroe-mini-m4-for-stm32.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1010-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1015-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1020-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1024-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1050-evk-qspi.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1050-evk.conf \| 22 +++++++++++++++++++ .../machine/mimxrt1060-evk-hyperflash.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1060-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1064-evk.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1170-evk-cm4.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt1170-evk-cm7.conf \| 22 +++++++++++++++++++ .../conf/machine/mimxrt685-evk-cm33.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mm-feather.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mm-swiftio.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mps2-an385.conf \| 22 +++++++++++++++++++ .../conf/machine/mps2-an521-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/mps2-an521-remote.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mps2-an521.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/mps3-an547.conf \| 22 +++++++++++++++++++ .../machine/msp-exp432p401r-launchxl.conf \| 22 +++++++++++++++++++ .../conf/machine/native-posix-64.conf \| 22 +++++++++++++++++++ .../conf/machine/native-posix.conf \| 22 +++++++++++++++++++ .../conf/machine/npcx7m6fb-evb.conf \| 22 +++++++++++++++++++ .../conf/machine/npcx9m6f-evb.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf21540dk-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf51-ble400.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf51-blenano.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf51-vbluno51.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf51dk-nrf51422.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf51dongle-nrf51422.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52-adafruit-feather.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52-blenano2.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52-sparkfun.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52-vbluno52.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52832-mdk.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52833dk-nrf52820.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52833dk-nrf52833.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52840-blip.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52840-mdk.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52840-papyr.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52840dk-nrf52811.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52840dongle-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52dk-nrf52805.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52dk-nrf52810.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf52dk-nrf52832.conf \| 22 +++++++++++++++++++ .../machine/nrf5340dk-nrf5340-cpuapp-ns.conf \| 22 +++++++++++++++++++ .../machine/nrf5340dk-nrf5340-cpuapp.conf \| 22 +++++++++++++++++++ .../machine/nrf5340dk-nrf5340-cpunet.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160-innblue21-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160-innblue21.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160-innblue22-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160-innblue22.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160dk-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160dk-nrf9160-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/nrf9160dk-nrf9160.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/nsim-em.conf \| 22 +++++++++++++++++++ .../conf/machine/nsim-em7d-v22.conf \| 22 +++++++++++++++++++ .../conf/machine/nsim-hs-mpuv6.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/nsim-hs.conf \| 22 +++++++++++++++++++ .../conf/machine/nsim-hs6x-smp.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/nsim-hs6x.conf \| 22 +++++++++++++++++++ .../machine/nsim-sem-mpu-stack-guard.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/nsim-sem.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f030r8.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f031k6.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f070rb.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f091rc.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f103rb.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f207zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f302r8.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f303k8.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f303re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f334r8.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f401re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f410rb.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f411re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f412zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f413zh.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f429zi.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f446re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f746zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f756zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-f767zi.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-g071rb.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-g0b1re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-g431rb.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-g474re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-h723zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-h743zi.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-h745zi-q-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-h745zi-q-m7.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-h753zi.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l011k4.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l031k6.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l053r8.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l073rz.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l152re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l412rb-p.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l432kc.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l433rc-p.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l452re-p.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l452re.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l476rg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l496zg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l4r5zi.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l552ze-q-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-l552ze-q.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-u575zi-q.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-wb55rg.conf \| 22 +++++++++++++++++++ .../conf/machine/nucleo-wl55jc.conf \| 22 +++++++++++++++++++ .../conf/machine/nuvoton-pfm-m487.conf \| 22 +++++++++++++++++++ .../conf/machine/nxp-adsp-imx8.conf \| 22 +++++++++++++++++++ .../machine/nxp-ls1046ardb-smp-2cores.conf \| 22 +++++++++++++++++++ .../machine/nxp-ls1046ardb-smp-4cores.conf \| 22 +++++++++++++++++++ .../conf/machine/nxp-ls1046ardb.conf \| 22 +++++++++++++++++++ .../conf/machine/olimex-stm32-e407.conf \| 22 +++++++++++++++++++ .../conf/machine/olimex-stm32-h103.conf \| 22 +++++++++++++++++++ .../conf/machine/olimex-stm32-h407.conf \| 22 +++++++++++++++++++ .../conf/machine/olimex-stm32-p405.conf \| 22 +++++++++++++++++++ .../conf/machine/olimexino-stm32.conf \| 22 +++++++++++++++++++ .../conf/machine/particle-argon.conf \| 22 +++++++++++++++++++ .../conf/machine/particle-boron.conf \| 22 +++++++++++++++++++ .../conf/machine/particle-xenon.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/pico-pi-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/pinetime-devkit0.conf \| 22 +++++++++++++++++++ .../conf/machine/pinnacle-100-dvk.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/qemu-arc-em.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-arc-hs6x.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-cortex-a53-smp.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-cortex-a53-xip.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-cortex-a53.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-cortex-m0.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-cortex-r5.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/qemu-leon3.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-riscv32-xip.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-riscv32.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-riscv64.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-64-nokpti.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/qemu-x86-64.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-lakemont.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-nokpti.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-nommu.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-nopae.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-tiny.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-virt.conf \| 22 +++++++++++++++++++ .../conf/machine/qemu-x86-xip.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/qemu-xtensa.conf \| 22 +++++++++++++++++++ .../conf/machine/quick-feather.conf \| 22 +++++++++++++++++++ .../conf/machine/rak4631-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/rak5010-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/rcar-h3ulcb-cr7.conf \| 22 +++++++++++++++++++ .../conf/machine/reel-board-v2.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/reel-board.conf \| 22 +++++++++++++++++++ .../conf/machine/ronoth-lodev.conf \| 22 +++++++++++++++++++ .../conf/machine/ruuvi-ruuvitag.conf \| 22 +++++++++++++++++++ .../conf/machine/rv32m1-vega-ri5cy.conf \| 22 +++++++++++++++++++ .../conf/machine/rv32m1-vega-zero-riscy.conf \| 22 +++++++++++++++++++ .../conf/machine/sam-e70-xplained.conf \| 22 +++++++++++++++++++ .../conf/machine/sam-e70b-xplained.conf \| 22 +++++++++++++++++++ .../conf/machine/sam-v71-xult.conf \| 22 +++++++++++++++++++ .../conf/machine/sam-v71b-xult.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/sam4e-xpro.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/sam4l-ek.conf \| 22 +++++++++++++++++++ .../conf/machine/sam4s-xplained.conf \| 22 +++++++++++++++++++ .../conf/machine/seeeduino-xiao.conf \| 22 +++++++++++++++++++ .../conf/machine/segger-trb-stm32f407.conf \| 22 +++++++++++++++++++ .../conf/machine/sensortile-box.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/serpente.conf \| 22 +++++++++++++++++++ .../sparkfun-thing-plus-nrf9160-ns.conf \| 22 +++++++++++++++++++ .../machine/sparkfun-thing-plus-nrf9160.conf \| 22 +++++++++++++++++++ .../conf/machine/steval-fcu001v1.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32-min-dev-black.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32-min-dev-blue.conf \| 22 +++++++++++++++++++ .../conf/machine/stm3210c-eval.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32373c-eval.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f0-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f030-demo.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f072-eval.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f072b-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f103-mini.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f3-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f4-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f411e-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f412g-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f429i-disc1.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f469i-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f723e-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f746g-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32f769i-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32g0316-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32g071b-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32h735g-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32h747i-disco-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32h747i-disco-m7.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32l1-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32l476g-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32l496g-disco.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32l562e-dk-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32l562e-dk.conf \| 22 +++++++++++++++++++ .../conf/machine/stm32vl-disco.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/teensy40.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/teensy41.conf \| 22 +++++++++++++++++++ .../conf/machine/thingy52-nrf52832.conf \| 22 +++++++++++++++++++ .../machine/thingy53-nrf5340-cpuapp-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/thingy53-nrf5340-cpuapp.conf \| 22 +++++++++++++++++++ .../conf/machine/thingy53-nrf5340-cpunet.conf \| 22 +++++++++++++++++++ .../conf/machine/tlsr9518adk80d.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/twr-ke18f.conf \| 22 +++++++++++++++++++ .../conf/machine/twr-kv58f220m.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd300eval-nrf52832.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd330eval-nrf52810.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd340eval-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd345eval-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd360eval-nrf52811.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-bmd380eval-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-evkannab1-nrf52832.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-evkninab1-nrf52832.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-evkninab3-nrf52840.conf \| 22 +++++++++++++++++++ .../conf/machine/ubx-evkninab4-nrf52833.conf \| 22 +++++++++++++++++++ .../conf/machine/udoo-neo-full-m4.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/up-squared.conf \| 22 +++++++++++++++++++ .../conf/machine/usb-kw24d512.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/v2m-beetle.conf \| 22 +++++++++++++++++++ .../conf/machine/v2m-musca-b1-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/v2m-musca-b1.conf \| 22 +++++++++++++++++++ .../conf/machine/v2m-musca-s1-ns.conf \| 22 +++++++++++++++++++ .../conf/machine/v2m-musca-s1.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/warp7-m4.conf \| 22 +++++++++++++++++++ .../conf/machine/waveshare-open103z.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/xenvm.conf \| 22 +++++++++++++++++++ .../conf/machine/xmc45-relax-kit.conf \| 22 +++++++++++++++++++ .../conf/machine/xt-sim-intel-s1000.conf \| 22 +++++++++++++++++++ meta-zephyr-bsp/conf/machine/xt-sim.conf \| 22 +++++++++++++++++++ 382 files changed, 8404 insertions(+) create mode 100755 meta-zephyr-bsp/conf/machine/96b-aerocore2.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-argonkey.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-carbon- nrf51.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-carbon.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-meerkat96.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-neonkey.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-stm32-sensor- mez.conf create mode 100755 meta-zephyr-bsp/conf/machine/96b-wistrio.conf create mode 100755 meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf create mode 100755 meta-zephyr-bsp/conf/machine/acrn.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-bee- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus- bee.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-som- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus- som.conf create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus.conf create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather- m0-basic-proto.conf create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather- stm32f405.conf create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-itsybitsy- m4-express.conf create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-trinket- m0.conf create mode 100755 meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf create mode 100755 meta-zephyr-bsp/conf/machine/altera-max10.conf create mode 100755 meta-zephyr-bsp/conf/machine/arduino-due.conf create mode 100755 meta-zephyr-bsp/conf/machine/arduino-nano-33- iot.conf create mode 100755 meta-zephyr-bsp/conf/machine/arduino-zero.conf create mode 100755 meta-zephyr-bsp/conf/machine/arty-a7-arm- designstart-m1.conf create mode 100755 meta-zephyr-bsp/conf/machine/arty-a7-arm- designstart-m3.conf create mode 100755 meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf create mode 100755 meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf create mode 100755 meta-zephyr-bsp/conf/machine/atsame54-xpro.conf create mode 100755 meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf create mode 100755 meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf create mode 100755 meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf create mode 100755 meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf create mode 100755 meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf create mode 100755 meta-zephyr-bsp/conf/machine/bbc-microbit.conf create mode 100755 meta-zephyr-bsp/conf/machine/bcm958401m2.conf create mode 100755 meta-zephyr-bsp/conf/machine/bcm958402m2- a72.conf create mode 100755 meta-zephyr-bsp/conf/machine/bcm958402m2- m7.conf create mode 100755 meta-zephyr-bsp/conf/machine/beaglev-starlight- jh7100.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk- cpuapp.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk- cpunet.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl652-dvk.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl653-dvk.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl654-dvk.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl654-sensor- board.conf create mode 100755 meta-zephyr-bsp/conf/machine/bl654-usb.conf create mode 100755 meta-zephyr-bsp/conf/machine/black-f407ve.conf create mode 100755 meta-zephyr-bsp/conf/machine/black-f407zg- pro.conf create mode 100755 meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf create mode 100755 meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf create mode 100755 meta-zephyr-bsp/conf/machine/bt510.conf create mode 100755 meta-zephyr-bsp/conf/machine/bt610.conf create mode 100755 meta-zephyr-bsp/conf/machine/cc1352r- sensortag.conf create mode 100755 meta-zephyr-bsp/conf/machine/cc1352r1- launchxl.conf create mode 100755 meta-zephyr-bsp/conf/machine/cc26x2r1- launchxl.conf create mode 100755 meta-zephyr-bsp/conf/machine/cc3220sf- launchxl.conf create mode 100755 meta-zephyr-bsp/conf/machine/cc3235sf- launchxl.conf create mode 100755 meta-zephyr-bsp/conf/machine/circuitdojo-feather- nrf9160-ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/circuitdojo-feather- nrf9160.conf create mode 100755 meta-zephyr-bsp/conf/machine/colibri-imx7d- m4.conf create mode 100755 meta-zephyr- bsp/conf/machine/contextualelectronics-abc.conf create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-ble- m0.conf create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-ble- m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt- m0.conf create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt- m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/decawave- dwm1001-dev.conf create mode 100755 meta-zephyr-bsp/conf/machine/degu-evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf create mode 100755 meta-zephyr-bsp/conf/machine/dragino-lsn50.conf create mode 100755 meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32gg- slwstk6121a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32gg- stk3701a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32hg- slstk3400a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg- stk3401a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg-stk3402a- jg.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg- stk3402a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efm32wg- stk3800.conf create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio- brd4104a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio- brd4180a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio- brd4250b.conf create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio- brd4255a.conf create mode 100755 meta-zephyr-bsp/conf/machine/efr32mg- sltb004a.conf create mode 100755 meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf create mode 100755 meta-zephyr-bsp/conf/machine/ehl-crb.conf create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit- em11d.conf create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit-em7d- v22.conf create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit- em7d.conf create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em4.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em5d.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em6.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em7d- esp.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em7d.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em9d.conf create mode 100755 meta-zephyr-bsp/conf/machine/emsdp.conf create mode 100755 meta-zephyr-bsp/conf/machine/esp32c3- devkitm.conf create mode 100755 meta-zephyr-bsp/conf/machine/faze.conf create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k22f.conf create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k64f.conf create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k82f.conf create mode 100755 meta-zephyr-bsp/conf/machine/frdm-kl25z.conf create mode 100755 meta-zephyr-bsp/conf/machine/frdm-kw41z.conf create mode 100755 meta-zephyr-bsp/conf/machine/fvp-base-revc- 2xaemv8a.conf create mode 100755 meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r- smp.conf create mode 100755 meta-zephyr-bsp/conf/machine/fvp-baser- aemv8r.conf create mode 100755 meta-zephyr-bsp/conf/machine/google-kukui.conf create mode 100755 meta-zephyr-bsp/conf/machine/gr716a-mini.conf create mode 100755 meta-zephyr-bsp/conf/machine/hexiwear-k64.conf create mode 100755 meta-zephyr-bsp/conf/machine/hexiwear- kw40z.conf create mode 100755 meta-zephyr-bsp/conf/machine/hifive- unleashed.conf create mode 100755 meta-zephyr-bsp/conf/machine/hifive- unmatched.conf create mode 100755 meta-zephyr-bsp/conf/machine/hifive1-revb.conf create mode 100755 meta-zephyr-bsp/conf/machine/hifive1.conf create mode 100755 meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf create mode 100755 meta-zephyr-bsp/conf/machine/hsdk-2cores.conf create mode 100755 meta-zephyr-bsp/conf/machine/hsdk.conf create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp- cavs15.conf create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp- cavs18.conf create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp- cavs20.conf create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp- cavs25.conf create mode 100755 meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf create mode 100755 meta-zephyr-bsp/conf/machine/iotdk.conf create mode 100755 meta-zephyr-bsp/conf/machine/ip-k66f.conf create mode 100755 meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf create mode 100755 meta-zephyr-bsp/conf/machine/legend.conf create mode 100755 meta-zephyr-bsp/conf/machine/litex-vexriscv.conf create mode 100755 meta-zephyr-bsp/conf/machine/lora-e5-dev- board.conf create mode 100755 meta-zephyr- bsp/conf/machine/lpcxpresso11u68.conf create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso54114- m0.conf create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso54114- m4.conf create mode 100755 meta-zephyr- bsp/conf/machine/lpcxpresso55s16.conf create mode 100755 meta-zephyr- bsp/conf/machine/lpcxpresso55s28.conf create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69- cpu0.conf create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69- cpu1.conf create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/m2gl025-miv.conf create mode 100755 meta-zephyr-bsp/conf/machine/mec1501modular- assy6885.conf create mode 100755 meta-zephyr-bsp/conf/machine/mec15xxevb- assy6853.conf create mode 100755 meta-zephyr-bsp/conf/machine/mec172xevb- assy6906.conf create mode 100755 meta-zephyr-bsp/conf/machine/mec2016evb- assy6797.conf create mode 100755 meta-zephyr-bsp/conf/machine/mercury-xu.conf create mode 100755 meta-zephyr-bsp/conf/machine/mikroe-clicker- 2.conf create mode 100755 meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for- stm32.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1010- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1015- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1020- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1024- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1050-evk- qspi.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1050- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1060-evk- hyperflash.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1060- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1064- evk.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1170-evk- cm4.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1170-evk- cm7.conf create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt685-evk- cm33.conf create mode 100755 meta-zephyr-bsp/conf/machine/mm-feather.conf create mode 100755 meta-zephyr-bsp/conf/machine/mm-swiftio.conf create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an385.conf create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521- remote.conf create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521.conf create mode 100755 meta-zephyr-bsp/conf/machine/mps3-an547.conf create mode 100755 meta-zephyr-bsp/conf/machine/msp-exp432p401r- launchxl.conf create mode 100755 meta-zephyr-bsp/conf/machine/native-posix-64.conf create mode 100755 meta-zephyr-bsp/conf/machine/native-posix.conf create mode 100755 meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf create mode 100755 meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf21540dk- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-ble400.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-blenano.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf51dk- nrf51422.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf51dongle- nrf51422.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-adafruit- feather.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52833dk- nrf52820.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52833dk- nrf52833.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-blip.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840dk- nrf52811.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840dongle- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk- nrf52805.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk- nrf52810.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk- nrf52832.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340- cpuapp-ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340- cpuapp.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340- cpunet.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-innblue21- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160- innblue21.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-innblue22- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160- innblue22.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk- nrf9160.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-em.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs6x.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-sem-mpu- stack-guard.conf create mode 100755 meta-zephyr-bsp/conf/machine/nsim-sem.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f303re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f401re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f411re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f446re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g474re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h745zi-q- m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h745zi-q- m7.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l152re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l452re.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l552ze-q- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l552ze- q.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-u575zi- q.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf create mode 100755 meta-zephyr-bsp/conf/machine/nuvoton-pfm- m487.conf create mode 100755 meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb- smp-2cores.conf create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb- smp-4cores.conf create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32- e407.conf create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32- h103.conf create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32- h407.conf create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32- p405.conf create mode 100755 meta-zephyr-bsp/conf/machine/olimexino- stm32.conf create mode 100755 meta-zephyr-bsp/conf/machine/particle-argon.conf create mode 100755 meta-zephyr-bsp/conf/machine/particle-boron.conf create mode 100755 meta-zephyr-bsp/conf/machine/particle-xenon.conf create mode 100755 meta-zephyr-bsp/conf/machine/pico-pi-m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/pinetime- devkit0.conf create mode 100755 meta-zephyr-bsp/conf/machine/pinnacle-100- dvk.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-em.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-a53- smp.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-a53- xip.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex- a53.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex- m0.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex- r5.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-leon3.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv32- xip.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv32.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv64.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-64- nokpti.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-64.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86- lakemont.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86- nokpti.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86- nommu.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86- nopae.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf create mode 100755 meta-zephyr-bsp/conf/machine/qemu-xtensa.conf create mode 100755 meta-zephyr-bsp/conf/machine/quick-feather.conf create mode 100755 meta-zephyr-bsp/conf/machine/rak4631- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/rak5010- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf create mode 100755 meta-zephyr-bsp/conf/machine/reel-board-v2.conf create mode 100755 meta-zephyr-bsp/conf/machine/reel-board.conf create mode 100755 meta-zephyr-bsp/conf/machine/ronoth-lodev.conf create mode 100755 meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf create mode 100755 meta-zephyr-bsp/conf/machine/rv32m1-vega- ri5cy.conf create mode 100755 meta-zephyr-bsp/conf/machine/rv32m1-vega-zero- riscy.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam-e70- xplained.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam-e70b- xplained.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam-v71-xult.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam4e-xpro.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam4l-ek.conf create mode 100755 meta-zephyr-bsp/conf/machine/sam4s-xplained.conf create mode 100755 meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf create mode 100755 meta-zephyr-bsp/conf/machine/segger-trb- stm32f407.conf create mode 100755 meta-zephyr-bsp/conf/machine/sensortile-box.conf create mode 100755 meta-zephyr-bsp/conf/machine/serpente.conf create mode 100755 meta-zephyr-bsp/conf/machine/sparkfun-thing-plus- nrf9160-ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/sparkfun-thing-plus- nrf9160.conf create mode 100755 meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32-min-dev- black.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32-min-dev- blue.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm3210c-eval.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32373c-eval.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f0-disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f030- demo.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f072-eval.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f072b- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f103-mini.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f3-disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f4-disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f411e- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f412g- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f429i- disc1.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f469i- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f723e- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f746g- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32f769i- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32g0316- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32g071b- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32h735g- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32h747i-disco- m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32h747i-disco- m7.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32l1-disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32l476g- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32l496g- disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32l562e-dk- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf create mode 100755 meta-zephyr-bsp/conf/machine/stm32vl-disco.conf create mode 100755 meta-zephyr-bsp/conf/machine/teensy40.conf create mode 100755 meta-zephyr-bsp/conf/machine/teensy41.conf create mode 100755 meta-zephyr-bsp/conf/machine/thingy52- nrf52832.conf create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340- cpuapp-ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340- cpuapp.conf create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340- cpunet.conf create mode 100755 meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf create mode 100755 meta-zephyr-bsp/conf/machine/twr-ke18f.conf create mode 100755 meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd300eval- nrf52832.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd330eval- nrf52810.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd340eval- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd345eval- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd360eval- nrf52811.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd380eval- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkannab1- nrf52832.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab1- nrf52832.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab3- nrf52840.conf create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab4- nrf52833.conf create mode 100755 meta-zephyr-bsp/conf/machine/udoo-neo-full- m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/up-squared.conf create mode 100755 meta-zephyr-bsp/conf/machine/usb-kw24d512.conf create mode 100755 meta-zephyr-bsp/conf/machine/v2m-beetle.conf create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-b1- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-s1- ns.conf create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf create mode 100755 meta-zephyr-bsp/conf/machine/warp7-m4.conf create mode 100755 meta-zephyr-bsp/conf/machine/waveshare- open103z.conf create mode 100755 meta-zephyr-bsp/conf/machine/xenvm.conf create mode 100755 meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf create mode 100755 meta-zephyr-bsp/conf/machine/xt-sim-intel- s1000.conf create mode 100755 meta-zephyr-bsp/conf/machine/xt-sim.conf diff --git a/meta-zephyr-bsp/conf/machine/96b-aerocore2.conf b/meta- zephyr-bsp/conf/machine/96b-aerocore2.conf new file mode 100755 index 0000000..6b8c958 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-aerocore2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-aerocore2 +#@DESCRIPTION: Machine configuration for 96b-aerocore2 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-aerocore2 = "arm" Every instance of ARCH_ needs to be ARCH: Also, it needs a path to the tune files. In this case, require conf/machine/include/arm/armv7m/tune-cortexm4.inc When I correct both of those, it will compile for me (on master branches). I only did one to confirm, but it should be easy enough to script for each one. BTW, I did test building and testing the previously existing machines and my rudamentary gitlab ci passes. Also, for some reason these patches aren't showing up on https://lore.kernel.org/yocto/ I'm guessing it's something to do with spam filters, but Halstead might be helpful there. Thanks, Jon + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_aerocore2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F427xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000" + +ZEPHYR_BOARD = "96b_aerocore2" + diff --git a/meta-zephyr-bsp/conf/machine/96b-argonkey.conf b/meta- zephyr-bsp/conf/machine/96b-argonkey.conf new file mode 100755 index 0000000..46af448 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-argonkey.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-argonkey +#@DESCRIPTION: Machine configuration for 96b-argonkey , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-argonkey = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_argonkey + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F412Cx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "96b_argonkey" + diff --git a/meta-zephyr-bsp/conf/machine/96b-carbon-nrf51.conf b/meta- zephyr-bsp/conf/machine/96b-carbon-nrf51.conf new file mode 100755 index 0000000..779cc0f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-carbon-nrf51.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-carbon-nrf51 +#@DESCRIPTION: Machine configuration for 96b-carbon-nrf51 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-carbon-nrf51 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: 96b_carbon_nrf51 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAC" + +ZEPHYR_BOARD = "96b_carbon_nrf51" + diff --git a/meta-zephyr-bsp/conf/machine/96b-carbon.conf b/meta- zephyr-bsp/conf/machine/96b-carbon.conf new file mode 100755 index 0000000..a1a94e0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-carbon.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-carbon +#@DESCRIPTION: Machine configuration for 96b-carbon , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-carbon = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_carbon + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "96b_carbon" + diff --git a/meta-zephyr-bsp/conf/machine/96b-meerkat96.conf b/meta- zephyr-bsp/conf/machine/96b-meerkat96.conf new file mode 100755 index 0000000..efe4ebb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-meerkat96.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-meerkat96 +#@DESCRIPTION: Machine configuration for 96b-meerkat96 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-meerkat96 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_meerkat96 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "96b_meerkat96" + diff --git a/meta-zephyr-bsp/conf/machine/96b-neonkey.conf b/meta- zephyr-bsp/conf/machine/96b-neonkey.conf new file mode 100755 index 0000000..de86440 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-neonkey.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-neonkey +#@DESCRIPTION: Machine configuration for 96b-neonkey , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-neonkey = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_neonkey + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "96b_neonkey" + diff --git a/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf b/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf new file mode 100755 index 0000000..2bb6a13 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-stm32-sensor-mez +#@DESCRIPTION: Machine configuration for 96b-stm32-sensor-mez , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-stm32-sensor-mez = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: 96b_stm32_sensor_mez + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F446xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "96b_stm32_sensor_mez" + diff --git a/meta-zephyr-bsp/conf/machine/96b-wistrio.conf b/meta- zephyr-bsp/conf/machine/96b-wistrio.conf new file mode 100755 index 0000000..fbd04cb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/96b-wistrio.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: 96b-wistrio +#@DESCRIPTION: Machine configuration for 96b-wistrio , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_96b-wistrio = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: 96b_wistrio + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L151xBA -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "96b_wistrio" + diff --git a/meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf b/meta- zephyr-bsp/conf/machine/acrn-ehl-crb.conf new file mode 100755 index 0000000..4537100 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: acrn-ehl-crb +#@DESCRIPTION: Machine configuration for acrn-ehl-crb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_acrn-ehl-crb = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: acrn_ehl_crb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "acrn_ehl_crb" + diff --git a/meta-zephyr-bsp/conf/machine/acrn.conf b/meta-zephyr- bsp/conf/machine/acrn.conf new file mode 100755 index 0000000..7225a24 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/acrn.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: acrn +#@DESCRIPTION: Machine configuration for acrn , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_acrn = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: acrn + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "acrn" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf new file mode 100755 index 0000000..6b6b5cb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus-bee-ns +#@DESCRIPTION: Machine configuration for actinius-icarus-bee-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus-bee-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus_bee_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "actinius_icarus_bee_ns" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf new file mode 100755 index 0000000..1f82cd6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus-bee +#@DESCRIPTION: Machine configuration for actinius-icarus-bee , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus-bee = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus_bee + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "actinius_icarus_bee" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-ns.conf b/meta- zephyr-bsp/conf/machine/actinius-icarus-ns.conf new file mode 100755 index 0000000..a8b5ff8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus-ns +#@DESCRIPTION: Machine configuration for actinius-icarus-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "actinius_icarus_ns" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf b/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf new file mode 100755 index 0000000..f1d50e7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus-som-ns +#@DESCRIPTION: Machine configuration for actinius-icarus-som-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus-som-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus_som_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "actinius_icarus_som_ns" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf b/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf new file mode 100755 index 0000000..732d1aa --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus-som +#@DESCRIPTION: Machine configuration for actinius-icarus-som , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus-som = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus_som + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "actinius_icarus_som" + diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus.conf b/meta- zephyr-bsp/conf/machine/actinius-icarus.conf new file mode 100755 index 0000000..043413c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: actinius-icarus +#@DESCRIPTION: Machine configuration for actinius-icarus , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_actinius-icarus = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: actinius_icarus + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "actinius_icarus" + diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic- proto.conf b/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic- proto.conf new file mode 100755 index 0000000..a4cfee5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic- proto.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adafruit-feather-m0-basic-proto +#@DESCRIPTION: Machine configuration for adafruit-feather-m0-basic- proto , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adafruit-feather-m0-basic-proto = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: adafruit_feather_m0_basic_proto + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "adafruit_feather_m0_basic_proto" + diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf b/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf new file mode 100755 index 0000000..6fc13a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adafruit-feather-nrf52840 +#@DESCRIPTION: Machine configuration for adafruit-feather-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adafruit-feather-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: adafruit_feather_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "adafruit_feather_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather- stm32f405.conf b/meta-zephyr-bsp/conf/machine/adafruit-feather- stm32f405.conf new file mode 100755 index 0000000..46f75e6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-stm32f405.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adafruit-feather-stm32f405 +#@DESCRIPTION: Machine configuration for adafruit-feather-stm32f405 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adafruit-feather-stm32f405 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: adafruit_feather_stm32f405 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F405xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000" + +ZEPHYR_BOARD = "adafruit_feather_stm32f405" + diff --git a/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4- express.conf b/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4- express.conf new file mode 100755 index 0000000..a3f0f40 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4-express.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adafruit-itsybitsy-m4-express +#@DESCRIPTION: Machine configuration for adafruit-itsybitsy-m4-express , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adafruit-itsybitsy-m4-express = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: adafruit_itsybitsy_m4_express + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "adafruit_itsybitsy_m4_express" + diff --git a/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf b/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf new file mode 100755 index 0000000..23a478b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adafruit-trinket-m0 +#@DESCRIPTION: Machine configuration for adafruit-trinket-m0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adafruit-trinket-m0 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: adafruit_trinket_m0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "adafruit_trinket_m0" + diff --git a/meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf b/meta- zephyr-bsp/conf/machine/adp-xc7k-ae350.conf new file mode 100755 index 0000000..d4ae227 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: adp-xc7k-ae350 +#@DESCRIPTION: Machine configuration for adp-xc7k-ae350 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_adp-xc7k-ae350 = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: adp_xc7k_ae350 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "adp_xc7k_ae350" + diff --git a/meta-zephyr-bsp/conf/machine/altera-max10.conf b/meta- zephyr-bsp/conf/machine/altera-max10.conf new file mode 100755 index 0000000..431725d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/altera-max10.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: altera-max10 +#@DESCRIPTION: Machine configuration for altera-max10 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_altera-max10 = "nios2" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: nios2 +# BOARD: altera_max10 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -DZEPHYR_RTOS" + +ZEPHYR_BOARD = "altera_max10" + diff --git a/meta-zephyr-bsp/conf/machine/arduino-due.conf b/meta- zephyr-bsp/conf/machine/arduino-due.conf new file mode 100755 index 0000000..539828b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/arduino-due.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: arduino-due +#@DESCRIPTION: Machine configuration for arduino-due , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_arduino-due = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: arduino_due + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "arduino_due" + diff --git a/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf b/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf new file mode 100755 index 0000000..ce77958 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: arduino-nano-33-iot +#@DESCRIPTION: Machine configuration for arduino-nano-33-iot , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_arduino-nano-33-iot = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: arduino_nano_33_iot + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "arduino_nano_33_iot" + diff --git a/meta-zephyr-bsp/conf/machine/arduino-zero.conf b/meta- zephyr-bsp/conf/machine/arduino-zero.conf new file mode 100755 index 0000000..b11af93 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/arduino-zero.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: arduino-zero +#@DESCRIPTION: Machine configuration for arduino-zero , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_arduino-zero = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: arduino_zero + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "arduino_zero" + diff --git a/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart- m1.conf b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m1.conf new file mode 100755 index 0000000..f6126ac --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: arty-a7-arm-designstart-m1 +#@DESCRIPTION: Machine configuration for arty-a7-arm-designstart-m1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_arty-a7-arm-designstart-m1 = "arm" + +DEFAULTUNE ?= "cortexm1" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m1 +# ARCH: arm +# BOARD: arty_a7_arm_designstart_m1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "arty_a7_arm_designstart_m1" + diff --git a/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart- m3.conf b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m3.conf new file mode 100755 index 0000000..6c225f2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m3.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: arty-a7-arm-designstart-m3 +#@DESCRIPTION: Machine configuration for arty-a7-arm-designstart-m3 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_arty-a7-arm-designstart-m3 = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: arty_a7_arm_designstart_m3 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "arty_a7_arm_designstart_m3" + diff --git a/meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf b/meta- zephyr-bsp/conf/machine/atsamd20-xpro.conf new file mode 100755 index 0000000..528af6c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: atsamd20-xpro +#@DESCRIPTION: Machine configuration for atsamd20-xpro , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_atsamd20-xpro = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: atsamd20_xpro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "atsamd20_xpro" + diff --git a/meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf b/meta- zephyr-bsp/conf/machine/atsamd21-xpro.conf new file mode 100755 index 0000000..129fc4d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: atsamd21-xpro +#@DESCRIPTION: Machine configuration for atsamd21-xpro , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_atsamd21-xpro = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: atsamd21_xpro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "atsamd21_xpro" + diff --git a/meta-zephyr-bsp/conf/machine/atsame54-xpro.conf b/meta- zephyr-bsp/conf/machine/atsame54-xpro.conf new file mode 100755 index 0000000..abd1076 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/atsame54-xpro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: atsame54-xpro +#@DESCRIPTION: Machine configuration for atsame54-xpro , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_atsame54-xpro = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: atsame54_xpro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "atsame54_xpro" + diff --git a/meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf b/meta- zephyr-bsp/conf/machine/atsamr21-xpro.conf new file mode 100755 index 0000000..9c408a0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: atsamr21-xpro +#@DESCRIPTION: Machine configuration for atsamr21-xpro , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_atsamr21-xpro = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: atsamr21_xpro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "atsamr21_xpro" + diff --git a/meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf b/meta- zephyr-bsp/conf/machine/b-l072z-lrwan1.conf new file mode 100755 index 0000000..adfdfe3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: b-l072z-lrwan1 +#@DESCRIPTION: Machine configuration for b-l072z-lrwan1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_b-l072z-lrwan1 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: b_l072z_lrwan1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "b_l072z_lrwan1" + diff --git a/meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf b/meta- zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf new file mode 100755 index 0000000..143bb90 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: b-l4s5i-iot01a +#@DESCRIPTION: Machine configuration for b-l4s5i-iot01a , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_b-l4s5i-iot01a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: b_l4s5i_iot01a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L4S5xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "b_l4s5i_iot01a" + diff --git a/meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf b/meta- zephyr-bsp/conf/machine/b-u585i-iot02a.conf new file mode 100755 index 0000000..133d15c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: b-u585i-iot02a +#@DESCRIPTION: Machine configuration for b-u585i-iot02a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_b-u585i-iot02a = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: b_u585i_iot02a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32U585xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "b_u585i_iot02a" + diff --git a/meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf b/meta- zephyr-bsp/conf/machine/bbc-microbit-v2.conf new file mode 100755 index 0000000..62f036d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bbc-microbit-v2 +#@DESCRIPTION: Machine configuration for bbc-microbit-v2 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bbc-microbit-v2 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bbc_microbit_v2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52833_XXAA" + +ZEPHYR_BOARD = "bbc_microbit_v2" + diff --git a/meta-zephyr-bsp/conf/machine/bbc-microbit.conf b/meta- zephyr-bsp/conf/machine/bbc-microbit.conf new file mode 100755 index 0000000..43ff247 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bbc-microbit.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bbc-microbit +#@DESCRIPTION: Machine configuration for bbc-microbit , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_bbc-microbit = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: bbc_microbit + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAA" + +ZEPHYR_BOARD = "bbc_microbit" + diff --git a/meta-zephyr-bsp/conf/machine/bcm958401m2.conf b/meta- zephyr-bsp/conf/machine/bcm958401m2.conf new file mode 100755 index 0000000..bbda910 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bcm958401m2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bcm958401m2 +#@DESCRIPTION: Machine configuration for bcm958401m2 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bcm958401m2 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: bcm958401m2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "bcm958401m2" + diff --git a/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf b/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf new file mode 100755 index 0000000..5df9982 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bcm958402m2-a72 +#@DESCRIPTION: Machine configuration for bcm958402m2-a72 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bcm958402m2-a72 = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a72 +# ARCH: arm64 +# BOARD: bcm958402m2_a72 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "bcm958402m2_a72" + diff --git a/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf b/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf new file mode 100755 index 0000000..29fc5d5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bcm958402m2-m7 +#@DESCRIPTION: Machine configuration for bcm958402m2-m7 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bcm958402m2-m7 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: bcm958402m2_m7 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "bcm958402m2_m7" + diff --git a/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf b/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf new file mode 100755 index 0000000..69109be --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: beaglev-starlight-jh7100 +#@DESCRIPTION: Machine configuration for beaglev-starlight-jh7100 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_beaglev-starlight-jh7100 = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: beaglev_starlight_jh7100 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "beaglev_starlight_jh7100" + diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf new file mode 100755 index 0000000..13e4e75 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl5340-dvk-cpuapp-ns +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpuapp-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bl5340-dvk-cpuapp-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: bl5340_dvk_cpuapp_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION - DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "bl5340_dvk_cpuapp_ns" + diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf new file mode 100755 index 0000000..d3acb11 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl5340-dvk-cpuapp +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpuapp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bl5340-dvk-cpuapp = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: bl5340_dvk_cpuapp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION" + +ZEPHYR_BOARD = "bl5340_dvk_cpuapp" + diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf new file mode 100755 index 0000000..630b1a2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl5340-dvk-cpunet +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpunet , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bl5340-dvk-cpunet = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: bl5340_dvk_cpunet + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_NETWORK" + +ZEPHYR_BOARD = "bl5340_dvk_cpunet" + diff --git a/meta-zephyr-bsp/conf/machine/bl652-dvk.conf b/meta-zephyr- bsp/conf/machine/bl652-dvk.conf new file mode 100755 index 0000000..5339375 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl652-dvk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl652-dvk +#@DESCRIPTION: Machine configuration for bl652-dvk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_bl652-dvk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bl652_dvk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "bl652_dvk" + diff --git a/meta-zephyr-bsp/conf/machine/bl653-dvk.conf b/meta-zephyr- bsp/conf/machine/bl653-dvk.conf new file mode 100755 index 0000000..2e52c62 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl653-dvk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl653-dvk +#@DESCRIPTION: Machine configuration for bl653-dvk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_bl653-dvk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bl653_dvk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52833_XXAA" + +ZEPHYR_BOARD = "bl653_dvk" + diff --git a/meta-zephyr-bsp/conf/machine/bl654-dvk.conf b/meta-zephyr- bsp/conf/machine/bl654-dvk.conf new file mode 100755 index 0000000..c3a0c41 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl654-dvk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl654-dvk +#@DESCRIPTION: Machine configuration for bl654-dvk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_bl654-dvk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bl654_dvk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "bl654_dvk" + diff --git a/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf b/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf new file mode 100755 index 0000000..a7272df --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl654-sensor-board +#@DESCRIPTION: Machine configuration for bl654-sensor-board , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bl654-sensor-board = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bl654_sensor_board + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "bl654_sensor_board" + diff --git a/meta-zephyr-bsp/conf/machine/bl654-usb.conf b/meta-zephyr- bsp/conf/machine/bl654-usb.conf new file mode 100755 index 0000000..a90009f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bl654-usb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bl654-usb +#@DESCRIPTION: Machine configuration for bl654-usb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_bl654-usb = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bl654_usb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "bl654_usb" + diff --git a/meta-zephyr-bsp/conf/machine/black-f407ve.conf b/meta- zephyr-bsp/conf/machine/black-f407ve.conf new file mode 100755 index 0000000..bc92e6f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/black-f407ve.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: black-f407ve +#@DESCRIPTION: Machine configuration for black-f407ve , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_black-f407ve = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: black_f407ve + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "black_f407ve" + diff --git a/meta-zephyr-bsp/conf/machine/black-f407zg-pro.conf b/meta- zephyr-bsp/conf/machine/black-f407zg-pro.conf new file mode 100755 index 0000000..237259e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/black-f407zg-pro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: black-f407zg-pro +#@DESCRIPTION: Machine configuration for black-f407zg-pro , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_black-f407zg-pro = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: black_f407zg_pro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "black_f407zg_pro" + diff --git a/meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf b/meta- zephyr-bsp/conf/machine/blackpill-f401ce.conf new file mode 100755 index 0000000..24f2dc5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: blackpill-f401ce +#@DESCRIPTION: Machine configuration for blackpill-f401ce , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_blackpill-f401ce = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: blackpill_f401ce + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "blackpill_f401ce" + diff --git a/meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf b/meta- zephyr-bsp/conf/machine/blackpill-f411ce.conf new file mode 100755 index 0000000..931f864 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: blackpill-f411ce +#@DESCRIPTION: Machine configuration for blackpill-f411ce , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_blackpill-f411ce = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: blackpill_f411ce + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "blackpill_f411ce" + diff --git a/meta-zephyr-bsp/conf/machine/bt510.conf b/meta-zephyr- bsp/conf/machine/bt510.conf new file mode 100755 index 0000000..0286fa2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bt510.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bt510 +#@DESCRIPTION: Machine configuration for bt510 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bt510 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bt510 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "bt510" + diff --git a/meta-zephyr-bsp/conf/machine/bt610.conf b/meta-zephyr- bsp/conf/machine/bt610.conf new file mode 100755 index 0000000..1b15c2a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/bt610.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: bt610 +#@DESCRIPTION: Machine configuration for bt610 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_bt610 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: bt610 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "bt610" + diff --git a/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf b/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf new file mode 100755 index 0000000..4578414 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cc1352r-sensortag +#@DESCRIPTION: Machine configuration for cc1352r-sensortag , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cc1352r-sensortag = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cc1352r_sensortag + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "cc1352r_sensortag" + diff --git a/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf b/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf new file mode 100755 index 0000000..cf74fc3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cc1352r1-launchxl +#@DESCRIPTION: Machine configuration for cc1352r1-launchxl , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cc1352r1-launchxl = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cc1352r1_launchxl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "cc1352r1_launchxl" + diff --git a/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf b/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf new file mode 100755 index 0000000..75d16fc --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cc26x2r1-launchxl +#@DESCRIPTION: Machine configuration for cc26x2r1-launchxl , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cc26x2r1-launchxl = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cc26x2r1_launchxl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "cc26x2r1_launchxl" + diff --git a/meta-zephyr-bsp/conf/machine/cc3220sf-launchxl.conf b/meta- zephyr-bsp/conf/machine/cc3220sf-launchxl.conf new file mode 100755 index 0000000..7b94be8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cc3220sf-launchxl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cc3220sf-launchxl +#@DESCRIPTION: Machine configuration for cc3220sf-launchxl , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cc3220sf-launchxl = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cc3220sf_launchxl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DUSE_CC3220_ROM_DRV_API" + +ZEPHYR_BOARD = "cc3220sf_launchxl" + diff --git a/meta-zephyr-bsp/conf/machine/cc3235sf-launchxl.conf b/meta- zephyr-bsp/conf/machine/cc3235sf-launchxl.conf new file mode 100755 index 0000000..5266bce --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cc3235sf-launchxl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cc3235sf-launchxl +#@DESCRIPTION: Machine configuration for cc3235sf-launchxl , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cc3235sf-launchxl = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cc3235sf_launchxl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DUSE_CC3220_ROM_DRV_API" + +ZEPHYR_BOARD = "cc3235sf_launchxl" + diff --git a/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160- ns.conf b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160- ns.conf new file mode 100755 index 0000000..8c5ab10 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160- ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: circuitdojo-feather-nrf9160-ns +#@DESCRIPTION: Machine configuration for circuitdojo-feather-nrf9160- ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_circuitdojo-feather-nrf9160-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: circuitdojo_feather_nrf9160_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "circuitdojo_feather_nrf9160_ns" + diff --git a/meta-zephyr-bsp/conf/machine/circuitdojo-feather- nrf9160.conf b/meta-zephyr-bsp/conf/machine/circuitdojo-feather- nrf9160.conf new file mode 100755 index 0000000..965696c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: circuitdojo-feather-nrf9160 +#@DESCRIPTION: Machine configuration for circuitdojo-feather-nrf9160 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_circuitdojo-feather-nrf9160 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: circuitdojo_feather_nrf9160 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "circuitdojo_feather_nrf9160" + diff --git a/meta-zephyr-bsp/conf/machine/colibri-imx7d-m4.conf b/meta- zephyr-bsp/conf/machine/colibri-imx7d-m4.conf new file mode 100755 index 0000000..1908982 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/colibri-imx7d-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: colibri-imx7d-m4 +#@DESCRIPTION: Machine configuration for colibri-imx7d-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_colibri-imx7d-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: colibri_imx7d_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "colibri_imx7d_m4" + diff --git a/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf b/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf new file mode 100755 index 0000000..ada8f67 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: contextualelectronics-abc +#@DESCRIPTION: Machine configuration for contextualelectronics-abc , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_contextualelectronics-abc = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: contextualelectronics_abc + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "contextualelectronics_abc" + diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf new file mode 100755 index 0000000..4fda05d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cy8ckit-062-ble-m0 +#@DESCRIPTION: Machine configuration for cy8ckit-062-ble-m0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cy8ckit-062-ble-m0 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: cy8ckit_062_ble_m0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCY8C6347BZI_BLD53 -D__copy_table_start__=0 - D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0" + +ZEPHYR_BOARD = "cy8ckit_062_ble_m0" + diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf new file mode 100755 index 0000000..a093ac1 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cy8ckit-062-ble-m4 +#@DESCRIPTION: Machine configuration for cy8ckit-062-ble-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cy8ckit-062-ble-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cy8ckit_062_ble_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCY8C6347BZI_BLD53 -D__copy_table_start__=0 - D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0" + +ZEPHYR_BOARD = "cy8ckit_062_ble_m4" + diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf new file mode 100755 index 0000000..12be80a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cy8ckit-062-wifi-bt-m0 +#@DESCRIPTION: Machine configuration for cy8ckit-062-wifi-bt-m0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cy8ckit-062-wifi-bt-m0 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: cy8ckit_062_wifi_bt_m0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCY8C6247BZI_D54 -D__copy_table_start__=0 - D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0" + +ZEPHYR_BOARD = "cy8ckit_062_wifi_bt_m0" + diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf new file mode 100755 index 0000000..a29e2ea --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: cy8ckit-062-wifi-bt-m4 +#@DESCRIPTION: Machine configuration for cy8ckit-062-wifi-bt-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_cy8ckit-062-wifi-bt-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: cy8ckit_062_wifi_bt_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCY8C6247BZI_D54 -D__copy_table_start__=0 - D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0" + +ZEPHYR_BOARD = "cy8ckit_062_wifi_bt_m4" + diff --git a/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf b/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf new file mode 100755 index 0000000..70c4b65 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: decawave-dwm1001-dev +#@DESCRIPTION: Machine configuration for decawave-dwm1001-dev , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_decawave-dwm1001-dev = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: decawave_dwm1001_dev + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "decawave_dwm1001_dev" + diff --git a/meta-zephyr-bsp/conf/machine/degu-evk.conf b/meta-zephyr- bsp/conf/machine/degu-evk.conf new file mode 100755 index 0000000..35270de --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/degu-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: degu-evk +#@DESCRIPTION: Machine configuration for degu-evk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_degu-evk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: degu_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "degu_evk" + diff --git a/meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf b/meta- zephyr-bsp/conf/machine/disco-l475-iot1.conf new file mode 100755 index 0000000..e356da7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: disco-l475-iot1 +#@DESCRIPTION: Machine configuration for disco-l475-iot1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_disco-l475-iot1 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: disco_l475_iot1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L475xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "disco_l475_iot1" + diff --git a/meta-zephyr-bsp/conf/machine/dragino-lsn50.conf b/meta- zephyr-bsp/conf/machine/dragino-lsn50.conf new file mode 100755 index 0000000..0554a7e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/dragino-lsn50.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: dragino-lsn50 +#@DESCRIPTION: Machine configuration for dragino-lsn50 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_dragino-lsn50 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: dragino_lsn50 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "dragino_lsn50" + diff --git a/meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf b/meta- zephyr-bsp/conf/machine/dragino-nbsn95.conf new file mode 100755 index 0000000..d46d091 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: dragino-nbsn95 +#@DESCRIPTION: Machine configuration for dragino-nbsn95 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_dragino-nbsn95 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: dragino_nbsn95 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "dragino_nbsn95" + diff --git a/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf b/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf new file mode 100755 index 0000000..0f796c5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32gg-slwstk6121a +#@DESCRIPTION: Machine configuration for efm32gg-slwstk6121a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32gg-slwstk6121a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efm32gg_slwstk6121a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32GG11B820F2048GM64" + +ZEPHYR_BOARD = "efm32gg_slwstk6121a" + diff --git a/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf b/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf new file mode 100755 index 0000000..f6aa296 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32gg-stk3701a +#@DESCRIPTION: Machine configuration for efm32gg-stk3701a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32gg-stk3701a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efm32gg_stk3701a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32GG11B820F2048GL192" + +ZEPHYR_BOARD = "efm32gg_stk3701a" + diff --git a/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf b/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf new file mode 100755 index 0000000..fae6607 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32hg-slstk3400a +#@DESCRIPTION: Machine configuration for efm32hg-slstk3400a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32hg-slstk3400a = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: efm32hg_slstk3400a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32HG322F64" + +ZEPHYR_BOARD = "efm32hg_slstk3400a" + diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf b/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf new file mode 100755 index 0000000..93f9dbe --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32pg-stk3401a +#@DESCRIPTION: Machine configuration for efm32pg-stk3401a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32pg-stk3401a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efm32pg_stk3401a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32PG1B200F256GM48" + +ZEPHYR_BOARD = "efm32pg_stk3401a" + diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf new file mode 100755 index 0000000..9b713e2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32pg-stk3402a-jg +#@DESCRIPTION: Machine configuration for efm32pg-stk3402a-jg , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32pg-stk3402a-jg = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: efm32pg_stk3402a_jg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32JG12B500F1024GL125" + +ZEPHYR_BOARD = "efm32pg_stk3402a_jg" + diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf new file mode 100755 index 0000000..62ea0ea --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32pg-stk3402a +#@DESCRIPTION: Machine configuration for efm32pg-stk3402a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32pg-stk3402a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efm32pg_stk3402a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32PG12B500F1024GL125" + +ZEPHYR_BOARD = "efm32pg_stk3402a" + diff --git a/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf b/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf new file mode 100755 index 0000000..6f2e73a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efm32wg-stk3800 +#@DESCRIPTION: Machine configuration for efm32wg-stk3800 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efm32wg-stk3800 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efm32wg_stk3800 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFM32WG990F256" + +ZEPHYR_BOARD = "efm32wg_stk3800" + diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf new file mode 100755 index 0000000..05156b1 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efr32-radio-brd4104a +#@DESCRIPTION: Machine configuration for efr32-radio-brd4104a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efr32-radio-brd4104a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efr32_radio_brd4104a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFR32BG13P632F512GM48" + +ZEPHYR_BOARD = "efr32_radio_brd4104a" + diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf new file mode 100755 index 0000000..233fd9d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efr32-radio-brd4180a +#@DESCRIPTION: Machine configuration for efr32-radio-brd4180a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efr32-radio-brd4180a = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: efr32_radio_brd4180a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFR32MG21A020F1024IM32" + +ZEPHYR_BOARD = "efr32_radio_brd4180a" + diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf new file mode 100755 index 0000000..d09b3c6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efr32-radio-brd4250b +#@DESCRIPTION: Machine configuration for efr32-radio-brd4250b , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efr32-radio-brd4250b = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efr32_radio_brd4250b + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFR32FG1P133F256GM48" + +ZEPHYR_BOARD = "efr32_radio_brd4250b" + diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf new file mode 100755 index 0000000..ff3acc3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efr32-radio-brd4255a +#@DESCRIPTION: Machine configuration for efr32-radio-brd4255a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efr32-radio-brd4255a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efr32_radio_brd4255a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFR32FG13P233F512GM48" + +ZEPHYR_BOARD = "efr32_radio_brd4255a" + diff --git a/meta-zephyr-bsp/conf/machine/efr32mg-sltb004a.conf b/meta- zephyr-bsp/conf/machine/efr32mg-sltb004a.conf new file mode 100755 index 0000000..a791053 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/efr32mg-sltb004a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: efr32mg-sltb004a +#@DESCRIPTION: Machine configuration for efr32mg-sltb004a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_efr32mg-sltb004a = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: efr32mg_sltb004a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DEFR32MG12P332F1024GL125" + +ZEPHYR_BOARD = "efr32mg_sltb004a" + diff --git a/meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf b/meta- zephyr-bsp/conf/machine/ehl-crb-sbl.conf new file mode 100755 index 0000000..39c90fd --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ehl-crb-sbl +#@DESCRIPTION: Machine configuration for ehl-crb-sbl , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_ehl-crb-sbl = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: ehl_crb_sbl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "ehl_crb_sbl" + diff --git a/meta-zephyr-bsp/conf/machine/ehl-crb.conf b/meta-zephyr- bsp/conf/machine/ehl-crb.conf new file mode 100755 index 0000000..c4a8f58 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ehl-crb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ehl-crb +#@DESCRIPTION: Machine configuration for ehl-crb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ehl-crb = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: ehl_crb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "ehl_crb" + diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf b/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf new file mode 100755 index 0000000..2f2f12c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: em-starterkit-em11d +#@DESCRIPTION: Machine configuration for em-starterkit-em11d , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_em-starterkit-em11d = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: em_starterkit_em11d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "em_starterkit_em11d" + diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf new file mode 100755 index 0000000..e8684b1 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: em-starterkit-em7d-v22 +#@DESCRIPTION: Machine configuration for em-starterkit-em7d-v22 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_em-starterkit-em7d-v22 = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_dmips +# ARCH: arc +# BOARD: em_starterkit_em7d_v22 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "em_starterkit_em7d_v22" + diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf new file mode 100755 index 0000000..79e878d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: em-starterkit-em7d +#@DESCRIPTION: Machine configuration for em-starterkit-em7d , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_em-starterkit-em7d = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_dmips +# ARCH: arc +# BOARD: em_starterkit_em7d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "em_starterkit_em7d" + diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit.conf b/meta- zephyr-bsp/conf/machine/em-starterkit.conf new file mode 100755 index 0000000..b309b76 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/em-starterkit.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: em-starterkit +#@DESCRIPTION: Machine configuration for em-starterkit , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_em-starterkit = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpus +# ARCH: arc +# BOARD: em_starterkit + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "em_starterkit" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em4.conf b/meta- zephyr-bsp/conf/machine/emsdp-em4.conf new file mode 100755 index 0000000..f27e9d5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em4 +#@DESCRIPTION: Machine configuration for emsdp-em4 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em4 = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem +# ARCH: arc +# BOARD: emsdp_em4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em4" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em5d.conf b/meta- zephyr-bsp/conf/machine/emsdp-em5d.conf new file mode 100755 index 0000000..1838da8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em5d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em5d +#@DESCRIPTION: Machine configuration for emsdp-em5d , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em5d = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: emsdp_em5d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em5d" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em6.conf b/meta- zephyr-bsp/conf/machine/emsdp-em6.conf new file mode 100755 index 0000000..4e3a14b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em6.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em6 +#@DESCRIPTION: Machine configuration for emsdp-em6 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em6 = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem +# ARCH: arc +# BOARD: emsdp_em6 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em6" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf b/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf new file mode 100755 index 0000000..1f9302f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em7d-esp +#@DESCRIPTION: Machine configuration for emsdp-em7d-esp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em7d-esp = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: emsdp_em7d_esp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em7d_esp" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em7d.conf b/meta- zephyr-bsp/conf/machine/emsdp-em7d.conf new file mode 100755 index 0000000..8307615 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em7d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em7d +#@DESCRIPTION: Machine configuration for emsdp-em7d , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em7d = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: emsdp_em7d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em7d" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em9d.conf b/meta- zephyr-bsp/conf/machine/emsdp-em9d.conf new file mode 100755 index 0000000..5d39947 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp-em9d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp-em9d +#@DESCRIPTION: Machine configuration for emsdp-em9d , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp-em9d = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: emsdp_em9d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp_em9d" + diff --git a/meta-zephyr-bsp/conf/machine/emsdp.conf b/meta-zephyr- bsp/conf/machine/emsdp.conf new file mode 100755 index 0000000..165e71c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/emsdp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: emsdp +#@DESCRIPTION: Machine configuration for emsdp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_emsdp = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: emsdp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "emsdp" + diff --git a/meta-zephyr-bsp/conf/machine/esp32c3-devkitm.conf b/meta- zephyr-bsp/conf/machine/esp32c3-devkitm.conf new file mode 100755 index 0000000..080e136 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/esp32c3-devkitm.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: esp32c3-devkitm +#@DESCRIPTION: Machine configuration for esp32c3-devkitm , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_esp32c3-devkitm = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: esp32c3_devkitm + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -D__ets__ - DESP_PLATFORM -DESPRESSIF_USE" + +ZEPHYR_BOARD = "esp32c3_devkitm" + diff --git a/meta-zephyr-bsp/conf/machine/faze.conf b/meta-zephyr- bsp/conf/machine/faze.conf new file mode 100755 index 0000000..ebc5f25 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/faze.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: faze +#@DESCRIPTION: Machine configuration for faze , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_faze = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: faze + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "faze" + diff --git a/meta-zephyr-bsp/conf/machine/frdm-k22f.conf b/meta- zephyr-bsp/conf/machine/frdm-k22f.conf new file mode 100755 index 0000000..232196c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/frdm-k22f.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: frdm-k22f +#@DESCRIPTION: Machine configuration for frdm-k22f , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_frdm-k22f = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: frdm_k22f + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MK22FN512VLH12 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "frdm_k22f" + diff --git a/meta-zephyr-bsp/conf/machine/frdm-k64f.conf b/meta- zephyr-bsp/conf/machine/frdm-k64f.conf new file mode 100755 index 0000000..057cf52 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/frdm-k64f.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: frdm-k64f +#@DESCRIPTION: Machine configuration for frdm-k64f , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_frdm-k64f = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: frdm_k64f + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MK64FN1M0VLL12 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "frdm_k64f" + diff --git a/meta-zephyr-bsp/conf/machine/frdm-k82f.conf b/meta- zephyr-bsp/conf/machine/frdm-k82f.conf new file mode 100755 index 0000000..e16a751 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/frdm-k82f.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: frdm-k82f +#@DESCRIPTION: Machine configuration for frdm-k82f , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_frdm-k82f = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: frdm_k82f + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MK82FN256VLL15 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "frdm_k82f" + diff --git a/meta-zephyr-bsp/conf/machine/frdm-kl25z.conf b/meta- zephyr-bsp/conf/machine/frdm-kl25z.conf new file mode 100755 index 0000000..eeb01d7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/frdm-kl25z.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: frdm-kl25z +#@DESCRIPTION: Machine configuration for frdm-kl25z , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_frdm-kl25z = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: frdm_kl25z + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKL25Z128VLK4 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "frdm_kl25z" + diff --git a/meta-zephyr-bsp/conf/machine/frdm-kw41z.conf b/meta- zephyr-bsp/conf/machine/frdm-kw41z.conf new file mode 100755 index 0000000..4ec7e0f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/frdm-kw41z.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: frdm-kw41z +#@DESCRIPTION: Machine configuration for frdm-kw41z , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_frdm-kw41z = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: frdm_kw41z + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKW41Z512VHT4 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "frdm_kw41z" + diff --git a/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf b/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf new file mode 100755 index 0000000..a607932 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: fvp-base-revc-2xaemv8a +#@DESCRIPTION: Machine configuration for fvp-base-revc-2xaemv8a , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_fvp-base-revc-2xaemv8a = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a53 +# ARCH: arm64 +# BOARD: fvp_base_revc_2xaemv8a + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "fvp_base_revc_2xaemv8a" + diff --git a/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf new file mode 100755 index 0000000..6edf153 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: fvp-baser-aemv8r-smp +#@DESCRIPTION: Machine configuration for fvp-baser-aemv8r-smp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_fvp-baser-aemv8r-smp = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: arm64 +# BOARD: fvp_baser_aemv8r_smp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "fvp_baser_aemv8r_smp" + diff --git a/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf new file mode 100755 index 0000000..23fb9d6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: fvp-baser-aemv8r +#@DESCRIPTION: Machine configuration for fvp-baser-aemv8r , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_fvp-baser-aemv8r = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: arm64 +# BOARD: fvp_baser_aemv8r + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "fvp_baser_aemv8r" + diff --git a/meta-zephyr-bsp/conf/machine/google-kukui.conf b/meta- zephyr-bsp/conf/machine/google-kukui.conf new file mode 100755 index 0000000..74acbe9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/google-kukui.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: google-kukui +#@DESCRIPTION: Machine configuration for google-kukui , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_google-kukui = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: google_kukui + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F098xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "google_kukui" + diff --git a/meta-zephyr-bsp/conf/machine/gr716a-mini.conf b/meta- zephyr-bsp/conf/machine/gr716a-mini.conf new file mode 100755 index 0000000..1f5538d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/gr716a-mini.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: gr716a-mini +#@DESCRIPTION: Machine configuration for gr716a-mini , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_gr716a-mini = "sparc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: sparc +# BOARD: gr716a_mini + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "gr716a_mini" + diff --git a/meta-zephyr-bsp/conf/machine/hexiwear-k64.conf b/meta- zephyr-bsp/conf/machine/hexiwear-k64.conf new file mode 100755 index 0000000..f6f31c5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hexiwear-k64.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hexiwear-k64 +#@DESCRIPTION: Machine configuration for hexiwear-k64 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_hexiwear-k64 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: hexiwear_k64 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MK64FN1M0VDC12 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "hexiwear_k64" + diff --git a/meta-zephyr-bsp/conf/machine/hexiwear-kw40z.conf b/meta- zephyr-bsp/conf/machine/hexiwear-kw40z.conf new file mode 100755 index 0000000..54aaff2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hexiwear-kw40z.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hexiwear-kw40z +#@DESCRIPTION: Machine configuration for hexiwear-kw40z , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_hexiwear-kw40z = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: hexiwear_kw40z + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKW40Z160VHT4 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "hexiwear_kw40z" + diff --git a/meta-zephyr-bsp/conf/machine/hifive-unleashed.conf b/meta- zephyr-bsp/conf/machine/hifive-unleashed.conf new file mode 100755 index 0000000..dafbf3d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hifive-unleashed.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hifive-unleashed +#@DESCRIPTION: Machine configuration for hifive-unleashed , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_hifive-unleashed = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: hifive_unleashed + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hifive_unleashed" + diff --git a/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf b/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf new file mode 100755 index 0000000..0cead26 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hifive-unmatched +#@DESCRIPTION: Machine configuration for hifive-unmatched , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_hifive-unmatched = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: hifive_unmatched + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hifive_unmatched" + diff --git a/meta-zephyr-bsp/conf/machine/hifive1-revb.conf b/meta- zephyr-bsp/conf/machine/hifive1-revb.conf new file mode 100755 index 0000000..e0b1a35 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hifive1-revb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hifive1-revb +#@DESCRIPTION: Machine configuration for hifive1-revb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_hifive1-revb = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: hifive1_revb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hifive1_revb" + diff --git a/meta-zephyr-bsp/conf/machine/hifive1.conf b/meta-zephyr- bsp/conf/machine/hifive1.conf new file mode 100755 index 0000000..2e47deb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hifive1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hifive1 +#@DESCRIPTION: Machine configuration for hifive1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_hifive1 = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: hifive1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hifive1" + diff --git a/meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf b/meta- zephyr-bsp/conf/machine/holyiot-yj16019.conf new file mode 100755 index 0000000..bab70f6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: holyiot-yj16019 +#@DESCRIPTION: Machine configuration for holyiot-yj16019 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_holyiot-yj16019 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: holyiot_yj16019 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "holyiot_yj16019" + diff --git a/meta-zephyr-bsp/conf/machine/hsdk-2cores.conf b/meta- zephyr-bsp/conf/machine/hsdk-2cores.conf new file mode 100755 index 0000000..da504e9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hsdk-2cores.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hsdk-2cores +#@DESCRIPTION: Machine configuration for hsdk-2cores , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_hsdk-2cores = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: hsdk_2cores + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hsdk_2cores" + diff --git a/meta-zephyr-bsp/conf/machine/hsdk.conf b/meta-zephyr- bsp/conf/machine/hsdk.conf new file mode 100755 index 0000000..9a6280f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/hsdk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: hsdk +#@DESCRIPTION: Machine configuration for hsdk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_hsdk = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: hsdk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "hsdk" + diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs15.conf b/meta- zephyr-bsp/conf/machine/intel-adsp-cavs15.conf new file mode 100755 index 0000000..6d7e181 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs15.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: intel-adsp-cavs15 +#@DESCRIPTION: Machine configuration for intel-adsp-cavs15 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_intel-adsp-cavs15 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: intel_adsp_cavs15 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "intel_adsp_cavs15" + diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs18.conf b/meta- zephyr-bsp/conf/machine/intel-adsp-cavs18.conf new file mode 100755 index 0000000..8dcc0f5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs18.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: intel-adsp-cavs18 +#@DESCRIPTION: Machine configuration for intel-adsp-cavs18 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_intel-adsp-cavs18 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: intel_adsp_cavs18 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "intel_adsp_cavs18" + diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs20.conf b/meta- zephyr-bsp/conf/machine/intel-adsp-cavs20.conf new file mode 100755 index 0000000..0d1d430 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs20.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: intel-adsp-cavs20 +#@DESCRIPTION: Machine configuration for intel-adsp-cavs20 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_intel-adsp-cavs20 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: intel_adsp_cavs20 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "intel_adsp_cavs20" + diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs25.conf b/meta- zephyr-bsp/conf/machine/intel-adsp-cavs25.conf new file mode 100755 index 0000000..86a4a4f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs25.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: intel-adsp-cavs25 +#@DESCRIPTION: Machine configuration for intel-adsp-cavs25 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_intel-adsp-cavs25 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: intel_adsp_cavs25 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "intel_adsp_cavs25" + diff --git a/meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf b/meta- zephyr-bsp/conf/machine/intel-s1000-crb.conf new file mode 100755 index 0000000..5e59c59 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: intel-s1000-crb +#@DESCRIPTION: Machine configuration for intel-s1000-crb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_intel-s1000-crb = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: intel_s1000_crb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "intel_s1000_crb" + diff --git a/meta-zephyr-bsp/conf/machine/iotdk.conf b/meta-zephyr- bsp/conf/machine/iotdk.conf new file mode 100755 index 0000000..1cb547e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/iotdk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: iotdk +#@DESCRIPTION: Machine configuration for iotdk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_iotdk = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpus +# ARCH: arc +# BOARD: iotdk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "iotdk" + diff --git a/meta-zephyr-bsp/conf/machine/ip-k66f.conf b/meta-zephyr- bsp/conf/machine/ip-k66f.conf new file mode 100755 index 0000000..a6d8232 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ip-k66f.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ip-k66f +#@DESCRIPTION: Machine configuration for ip-k66f , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ip-k66f = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ip_k66f + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MK66FN2M0VMD18 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "ip_k66f" + diff --git a/meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf b/meta- zephyr-bsp/conf/machine/it8xxx2-evb.conf new file mode 100755 index 0000000..f9338b9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: it8xxx2-evb +#@DESCRIPTION: Machine configuration for it8xxx2-evb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_it8xxx2-evb = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: it8xxx2_evb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "it8xxx2_evb" + diff --git a/meta-zephyr-bsp/conf/machine/legend.conf b/meta-zephyr- bsp/conf/machine/legend.conf new file mode 100755 index 0000000..261ce3f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/legend.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: legend +#@DESCRIPTION: Machine configuration for legend , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_legend = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: legend + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F070xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "legend" + diff --git a/meta-zephyr-bsp/conf/machine/litex-vexriscv.conf b/meta- zephyr-bsp/conf/machine/litex-vexriscv.conf new file mode 100755 index 0000000..dc71e4f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/litex-vexriscv.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: litex-vexriscv +#@DESCRIPTION: Machine configuration for litex-vexriscv , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_litex-vexriscv = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: litex_vexriscv + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "litex_vexriscv" + diff --git a/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf b/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf new file mode 100755 index 0000000..75f266c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lora-e5-dev-board +#@DESCRIPTION: Machine configuration for lora-e5-dev-board , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lora-e5-dev-board = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: lora_e5_dev_board + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32WLE5xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "lora_e5_dev_board" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso11u68.conf b/meta- zephyr-bsp/conf/machine/lpcxpresso11u68.conf new file mode 100755 index 0000000..d0397cc --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso11u68.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso11u68 +#@DESCRIPTION: Machine configuration for lpcxpresso11u68 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso11u68 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: lpcxpresso11u68 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "lpcxpresso11u68" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf new file mode 100755 index 0000000..6353f76 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso54114-m0 +#@DESCRIPTION: Machine configuration for lpcxpresso54114-m0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso54114-m0 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: lpcxpresso54114_m0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC54114J256BD64_cm0plus - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso54114_m0" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf new file mode 100755 index 0000000..7640d95 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso54114-m4 +#@DESCRIPTION: Machine configuration for lpcxpresso54114-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso54114-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: lpcxpresso54114_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC54114J256BD64_cm4 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso54114_m4" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s16.conf b/meta- zephyr-bsp/conf/machine/lpcxpresso55s16.conf new file mode 100755 index 0000000..482c144 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s16.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso55s16 +#@DESCRIPTION: Machine configuration for lpcxpresso55s16 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso55s16 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: lpcxpresso55s16 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC55S16JBD100 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso55s16" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s28.conf b/meta- zephyr-bsp/conf/machine/lpcxpresso55s28.conf new file mode 100755 index 0000000..05419e0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s28.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso55s28 +#@DESCRIPTION: Machine configuration for lpcxpresso55s28 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso55s28 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: lpcxpresso55s28 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC55S28JBD100 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso55s28" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf new file mode 100755 index 0000000..719125a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso55s69-cpu0 +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-cpu0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso55s69-cpu0 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: lpcxpresso55s69_cpu0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core0 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso55s69_cpu0" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf new file mode 100755 index 0000000..ac29fd0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso55s69-cpu1 +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-cpu1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso55s69-cpu1 = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: lpcxpresso55s69_cpu1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso55s69_cpu1" + diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf new file mode 100755 index 0000000..1fe805d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: lpcxpresso55s69-ns +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_lpcxpresso55s69-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: lpcxpresso55s69_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core0 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "lpcxpresso55s69_ns" + diff --git a/meta-zephyr-bsp/conf/machine/m2gl025-miv.conf b/meta- zephyr-bsp/conf/machine/m2gl025-miv.conf new file mode 100755 index 0000000..73f4a90 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/m2gl025-miv.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: m2gl025-miv +#@DESCRIPTION: Machine configuration for m2gl025-miv , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_m2gl025-miv = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: m2gl025_miv + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "m2gl025_miv" + diff --git a/meta-zephyr-bsp/conf/machine/mec1501modular- assy6885.conf b/meta-zephyr-bsp/conf/machine/mec1501modular- assy6885.conf new file mode 100755 index 0000000..0191138 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mec1501modular-assy6885.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mec1501modular-assy6885 +#@DESCRIPTION: Machine configuration for mec1501modular-assy6885 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mec1501modular-assy6885 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mec1501modular_assy6885 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mec1501modular_assy6885" + diff --git a/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf b/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf new file mode 100755 index 0000000..aae48bf --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mec15xxevb-assy6853 +#@DESCRIPTION: Machine configuration for mec15xxevb-assy6853 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mec15xxevb-assy6853 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mec15xxevb_assy6853 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mec15xxevb_assy6853" + diff --git a/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf b/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf new file mode 100755 index 0000000..04f5b5e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mec172xevb-assy6906 +#@DESCRIPTION: Machine configuration for mec172xevb-assy6906 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mec172xevb-assy6906 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mec172xevb_assy6906 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mec172xevb_assy6906" + diff --git a/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf b/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf new file mode 100755 index 0000000..03f3b9c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mec2016evb-assy6797 +#@DESCRIPTION: Machine configuration for mec2016evb-assy6797 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mec2016evb-assy6797 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mec2016evb_assy6797 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mec2016evb_assy6797" + diff --git a/meta-zephyr-bsp/conf/machine/mercury-xu.conf b/meta- zephyr-bsp/conf/machine/mercury-xu.conf new file mode 100755 index 0000000..72dd27d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mercury-xu.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mercury-xu +#@DESCRIPTION: Machine configuration for mercury-xu , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mercury-xu = "arm" + +DEFAULTUNE ?= "cortexr5" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- r5 +# ARCH: arm +# BOARD: mercury_xu + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mercury_xu" + diff --git a/meta-zephyr-bsp/conf/machine/mikroe-clicker-2.conf b/meta- zephyr-bsp/conf/machine/mikroe-clicker-2.conf new file mode 100755 index 0000000..35347e2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mikroe-clicker-2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mikroe-clicker-2 +#@DESCRIPTION: Machine configuration for mikroe-clicker-2 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mikroe-clicker-2 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mikroe_clicker_2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "mikroe_clicker_2" + diff --git a/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for- stm32.conf b/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for- stm32.conf new file mode 100755 index 0000000..3553787 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for-stm32.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mikroe-mini-m4-for-stm32 +#@DESCRIPTION: Machine configuration for mikroe-mini-m4-for-stm32 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mikroe-mini-m4-for-stm32 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mikroe_mini_m4_for_stm32 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F415xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "mikroe_mini_m4_for_stm32" + diff --git a/meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf b/meta- zephyr-bsp/conf/machine/mimx8mm-evk.conf new file mode 100755 index 0000000..7d1bad8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimx8mm-evk +#@DESCRIPTION: Machine configuration for mimx8mm-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimx8mm-evk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mimx8mm_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMX8MM6DVTLZ - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "mimx8mm_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1010-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1010-evk.conf new file mode 100755 index 0000000..3aca568 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1010-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1010-evk +#@DESCRIPTION: Machine configuration for mimxrt1010-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1010-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1010_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1011DAE5A - DXIP_BOOT_HEADER_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1010_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1015-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1015-evk.conf new file mode 100755 index 0000000..af4ab6c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1015-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1015-evk +#@DESCRIPTION: Machine configuration for mimxrt1015-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1015-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1015_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1015DAF5A - DXIP_BOOT_HEADER_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1015_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1020-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1020-evk.conf new file mode 100755 index 0000000..bc66f47 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1020-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1020-evk +#@DESCRIPTION: Machine configuration for mimxrt1020-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1020-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1020_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1021DAG5A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1020_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1024-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1024-evk.conf new file mode 100755 index 0000000..79fdd67 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1024-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1024-evk +#@DESCRIPTION: Machine configuration for mimxrt1024-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1024-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1024_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1024DAG5A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1024_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf new file mode 100755 index 0000000..736c7c2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1050-evk-qspi +#@DESCRIPTION: Machine configuration for mimxrt1050-evk-qspi , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1050-evk-qspi = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1050_evk_qspi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1052DVL6B - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1050_evk_qspi" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1050-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1050-evk.conf new file mode 100755 index 0000000..43e8e53 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1050-evk +#@DESCRIPTION: Machine configuration for mimxrt1050-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1050-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1050_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1052DVL6B - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1050_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1060-evk- hyperflash.conf b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk- hyperflash.conf new file mode 100755 index 0000000..e328c68 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk-hyperflash.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1060-evk-hyperflash +#@DESCRIPTION: Machine configuration for mimxrt1060-evk-hyperflash , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1060-evk-hyperflash = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1060_evk_hyperflash + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1062DVL6A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1060_evk_hyperflash" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1060-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1060-evk.conf new file mode 100755 index 0000000..91c35b3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1060-evk +#@DESCRIPTION: Machine configuration for mimxrt1060-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1060-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1060_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1062DVL6A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1060_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1064-evk.conf b/meta- zephyr-bsp/conf/machine/mimxrt1064-evk.conf new file mode 100755 index 0000000..d60c5e7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1064-evk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1064-evk +#@DESCRIPTION: Machine configuration for mimxrt1064-evk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1064-evk = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1064_evk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1064DVL6A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1064_evk" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf new file mode 100755 index 0000000..bb3eeb6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1170-evk-cm4 +#@DESCRIPTION: Machine configuration for mimxrt1170-evk-cm4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1170-evk-cm4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: mimxrt1170_evk_cm4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1176DVMAA_cm4 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1170_evk_cm4" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf new file mode 100755 index 0000000..49f3ef3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt1170-evk-cm7 +#@DESCRIPTION: Machine configuration for mimxrt1170-evk-cm7 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt1170-evk-cm7 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mimxrt1170_evk_cm7 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1176DVMAA_cm7 - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mimxrt1170_evk_cm7" + diff --git a/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf b/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf new file mode 100755 index 0000000..583c2a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mimxrt685-evk-cm33 +#@DESCRIPTION: Machine configuration for mimxrt685-evk-cm33 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mimxrt685-evk-cm33 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: mimxrt685_evk_cm33 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT685SFVKB_cm33 - DBOOT_HEADER_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024" + +ZEPHYR_BOARD = "mimxrt685_evk_cm33" + diff --git a/meta-zephyr-bsp/conf/machine/mm-feather.conf b/meta- zephyr-bsp/conf/machine/mm-feather.conf new file mode 100755 index 0000000..371904b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mm-feather.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mm-feather +#@DESCRIPTION: Machine configuration for mm-feather , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mm-feather = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mm_feather + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1062DVL6A - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mm_feather" + diff --git a/meta-zephyr-bsp/conf/machine/mm-swiftio.conf b/meta- zephyr-bsp/conf/machine/mm-swiftio.conf new file mode 100755 index 0000000..5e4df1f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mm-swiftio.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mm-swiftio +#@DESCRIPTION: Machine configuration for mm-swiftio , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mm-swiftio = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: mm_swiftio + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1052DVL6B - DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "mm_swiftio" + diff --git a/meta-zephyr-bsp/conf/machine/mps2-an385.conf b/meta- zephyr-bsp/conf/machine/mps2-an385.conf new file mode 100755 index 0000000..d3cd26b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mps2-an385.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mps2-an385 +#@DESCRIPTION: Machine configuration for mps2-an385 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mps2-an385 = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: mps2_an385 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mps2_an385" + diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf b/meta- zephyr-bsp/conf/machine/mps2-an521-ns.conf new file mode 100755 index 0000000..a889463 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mps2-an521-ns +#@DESCRIPTION: Machine configuration for mps2-an521-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mps2-an521-ns = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: mps2_an521_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mps2_an521_ns" + diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf b/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf new file mode 100755 index 0000000..0ad4e76 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mps2-an521-remote +#@DESCRIPTION: Machine configuration for mps2-an521-remote , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_mps2-an521-remote = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: mps2_an521_remote + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mps2_an521_remote" + diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521.conf b/meta- zephyr-bsp/conf/machine/mps2-an521.conf new file mode 100755 index 0000000..25d0165 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mps2-an521.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mps2-an521 +#@DESCRIPTION: Machine configuration for mps2-an521 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mps2-an521 = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: mps2_an521 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mps2_an521" + diff --git a/meta-zephyr-bsp/conf/machine/mps3-an547.conf b/meta- zephyr-bsp/conf/machine/mps3-an547.conf new file mode 100755 index 0000000..657e9ab --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/mps3-an547.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: mps3-an547 +#@DESCRIPTION: Machine configuration for mps3-an547 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_mps3-an547 = "arm" + +DEFAULTUNE ?= "cortexm55" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m55 +# ARCH: arm +# BOARD: mps3_an547 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "mps3_an547" + diff --git a/meta-zephyr-bsp/conf/machine/msp-exp432p401r- launchxl.conf b/meta-zephyr-bsp/conf/machine/msp-exp432p401r- launchxl.conf new file mode 100755 index 0000000..4ec86ef --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/msp-exp432p401r-launchxl.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: msp-exp432p401r-launchxl +#@DESCRIPTION: Machine configuration for msp-exp432p401r-launchxl , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_msp-exp432p401r-launchxl = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: msp_exp432p401r_launchxl + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__MSP432P401R__ -D__PROGRAM_START" + +ZEPHYR_BOARD = "msp_exp432p401r_launchxl" + diff --git a/meta-zephyr-bsp/conf/machine/native-posix-64.conf b/meta- zephyr-bsp/conf/machine/native-posix-64.conf new file mode 100755 index 0000000..b0391e3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/native-posix-64.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: native-posix-64 +#@DESCRIPTION: Machine configuration for native-posix-64 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_native-posix-64 = "posix" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: posix +# BOARD: native_posix_64 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D_POSIX_C_SOURCE=200809 -D_XOPEN_SOURCE=600 - D_XOPEN_SOURCE_EXTENDED" + +ZEPHYR_BOARD = "native_posix_64" + diff --git a/meta-zephyr-bsp/conf/machine/native-posix.conf b/meta- zephyr-bsp/conf/machine/native-posix.conf new file mode 100755 index 0000000..f8e05f7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/native-posix.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: native-posix +#@DESCRIPTION: Machine configuration for native-posix , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_native-posix = "posix" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: posix +# BOARD: native_posix + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D_POSIX_C_SOURCE=200809 -D_XOPEN_SOURCE=600 - D_XOPEN_SOURCE_EXTENDED" + +ZEPHYR_BOARD = "native_posix" + diff --git a/meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf b/meta- zephyr-bsp/conf/machine/npcx7m6fb-evb.conf new file mode 100755 index 0000000..bfec38f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: npcx7m6fb-evb +#@DESCRIPTION: Machine configuration for npcx7m6fb-evb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_npcx7m6fb-evb = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: npcx7m6fb_evb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "npcx7m6fb_evb" + diff --git a/meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf b/meta- zephyr-bsp/conf/machine/npcx9m6f-evb.conf new file mode 100755 index 0000000..c4e18cf --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: npcx9m6f-evb +#@DESCRIPTION: Machine configuration for npcx9m6f-evb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_npcx9m6f-evb = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: npcx9m6f_evb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "npcx9m6f_evb" + diff --git a/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf b/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf new file mode 100755 index 0000000..ef4787b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf21540dk-nrf52840 +#@DESCRIPTION: Machine configuration for nrf21540dk-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf21540dk-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf21540dk_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf21540dk_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/nrf51-ble400.conf b/meta- zephyr-bsp/conf/machine/nrf51-ble400.conf new file mode 100755 index 0000000..30f1c1c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf51-ble400.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf51-ble400 +#@DESCRIPTION: Machine configuration for nrf51-ble400 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf51-ble400 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nrf51_ble400 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAA" + +ZEPHYR_BOARD = "nrf51_ble400" + diff --git a/meta-zephyr-bsp/conf/machine/nrf51-blenano.conf b/meta- zephyr-bsp/conf/machine/nrf51-blenano.conf new file mode 100755 index 0000000..a633156 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf51-blenano.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf51-blenano +#@DESCRIPTION: Machine configuration for nrf51-blenano , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf51-blenano = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nrf51_blenano + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAA" + +ZEPHYR_BOARD = "nrf51_blenano" + diff --git a/meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf b/meta- zephyr-bsp/conf/machine/nrf51-vbluno51.conf new file mode 100755 index 0000000..5dedbc6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf51-vbluno51 +#@DESCRIPTION: Machine configuration for nrf51-vbluno51 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf51-vbluno51 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nrf51_vbluno51 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAC" + +ZEPHYR_BOARD = "nrf51_vbluno51" + diff --git a/meta-zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf b/meta- zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf new file mode 100755 index 0000000..2848d3b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf51dk-nrf51422 +#@DESCRIPTION: Machine configuration for nrf51dk-nrf51422 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf51dk-nrf51422 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nrf51dk_nrf51422 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAC" + +ZEPHYR_BOARD = "nrf51dk_nrf51422" + diff --git a/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf b/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf new file mode 100755 index 0000000..0497423 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf51dongle-nrf51422 +#@DESCRIPTION: Machine configuration for nrf51dongle-nrf51422 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf51dongle-nrf51422 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nrf51dongle_nrf51422 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAC" + +ZEPHYR_BOARD = "nrf51dongle_nrf51422" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf b/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf new file mode 100755 index 0000000..f97f874 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52-adafruit-feather +#@DESCRIPTION: Machine configuration for nrf52-adafruit-feather , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52-adafruit-feather = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52_adafruit_feather + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52_adafruit_feather" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf b/meta- zephyr-bsp/conf/machine/nrf52-blenano2.conf new file mode 100755 index 0000000..d468764 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52-blenano2 +#@DESCRIPTION: Machine configuration for nrf52-blenano2 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52-blenano2 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52_blenano2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52_blenano2" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf b/meta- zephyr-bsp/conf/machine/nrf52-sparkfun.conf new file mode 100755 index 0000000..968fd59 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52-sparkfun +#@DESCRIPTION: Machine configuration for nrf52-sparkfun , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52-sparkfun = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52_sparkfun + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52_sparkfun" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf b/meta- zephyr-bsp/conf/machine/nrf52-vbluno52.conf new file mode 100755 index 0000000..5e06316 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52-vbluno52 +#@DESCRIPTION: Machine configuration for nrf52-vbluno52 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52-vbluno52 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52_vbluno52 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52_vbluno52" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf b/meta- zephyr-bsp/conf/machine/nrf52832-mdk.conf new file mode 100755 index 0000000..37db366 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52832-mdk +#@DESCRIPTION: Machine configuration for nrf52832-mdk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52832-mdk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52832_mdk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52832_mdk" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf new file mode 100755 index 0000000..67c9a58 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52833dk-nrf52820 +#@DESCRIPTION: Machine configuration for nrf52833dk-nrf52820 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52833dk-nrf52820 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52833dk_nrf52820 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DDEVELOP_IN_NRF52833 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 - D__PROGRAM_START -DNRF52820_XXAA" + +ZEPHYR_BOARD = "nrf52833dk_nrf52820" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf new file mode 100755 index 0000000..6f99a90 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52833dk-nrf52833 +#@DESCRIPTION: Machine configuration for nrf52833dk-nrf52833 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52833dk-nrf52833 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52833dk_nrf52833 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52833_XXAA" + +ZEPHYR_BOARD = "nrf52833dk_nrf52833" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-blip.conf b/meta- zephyr-bsp/conf/machine/nrf52840-blip.conf new file mode 100755 index 0000000..5d542fc --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52840-blip.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52840-blip +#@DESCRIPTION: Machine configuration for nrf52840-blip , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52840-blip = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52840_blip + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf52840_blip" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf b/meta- zephyr-bsp/conf/machine/nrf52840-mdk.conf new file mode 100755 index 0000000..96a073b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52840-mdk +#@DESCRIPTION: Machine configuration for nrf52840-mdk , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52840-mdk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52840_mdk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf52840_mdk" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf b/meta- zephyr-bsp/conf/machine/nrf52840-papyr.conf new file mode 100755 index 0000000..ef55106 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52840-papyr +#@DESCRIPTION: Machine configuration for nrf52840-papyr , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52840-papyr = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52840_papyr + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf52840_papyr" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf b/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf new file mode 100755 index 0000000..0574979 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52840dk-nrf52811 +#@DESCRIPTION: Machine configuration for nrf52840dk-nrf52811 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52840dk-nrf52811 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52840dk_nrf52811 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DDEVELOP_IN_NRF52840 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 - D__PROGRAM_START -DNRF52811_XXAA" + +ZEPHYR_BOARD = "nrf52840dk_nrf52811" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf b/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf new file mode 100755 index 0000000..bc50c95 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52840dongle-nrf52840 +#@DESCRIPTION: Machine configuration for nrf52840dongle-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52840dongle-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52840dongle_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf52840dongle_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf b/meta- zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf new file mode 100755 index 0000000..39906e0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52dk-nrf52805 +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52805 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52dk-nrf52805 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52dk_nrf52805 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DDEVELOP_IN_NRF52832 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 - D__PROGRAM_START -DNRF52805_XXAA" + +ZEPHYR_BOARD = "nrf52dk_nrf52805" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf b/meta- zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf new file mode 100755 index 0000000..ee2ba8a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52dk-nrf52810 +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52810 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52dk-nrf52810 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52dk_nrf52810 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DDEVELOP_IN_NRF52832 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 - D__PROGRAM_START -DNRF52810_XXAA" + +ZEPHYR_BOARD = "nrf52dk_nrf52810" + diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf b/meta- zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf new file mode 100755 index 0000000..1d2d76f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf52dk-nrf52832 +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52832 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf52dk-nrf52832 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf52dk_nrf52832 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "nrf52dk_nrf52832" + diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp- ns.conf b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp- ns.conf new file mode 100755 index 0000000..bae7612 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf5340dk-nrf5340-cpuapp-ns +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpuapp- ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf5340dk-nrf5340-cpuapp-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf5340dk_nrf5340_cpuapp_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION - DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpuapp_ns" + diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340- cpuapp.conf b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340- cpuapp.conf new file mode 100755 index 0000000..20773a5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf5340dk-nrf5340-cpuapp +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpuapp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf5340dk-nrf5340-cpuapp = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf5340dk_nrf5340_cpuapp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION" + +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpuapp" + diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf new file mode 100755 index 0000000..3b71038 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf5340dk-nrf5340-cpunet +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpunet , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf5340dk-nrf5340-cpunet = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: nrf5340dk_nrf5340_cpunet + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_NETWORK" + +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpunet" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf new file mode 100755 index 0000000..685cc3a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160-innblue21-ns +#@DESCRIPTION: Machine configuration for nrf9160-innblue21-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160-innblue21-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160_innblue21_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "nrf9160_innblue21_ns" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf new file mode 100755 index 0000000..3b2a52c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160-innblue21 +#@DESCRIPTION: Machine configuration for nrf9160-innblue21 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160-innblue21 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160_innblue21 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "nrf9160_innblue21" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf new file mode 100755 index 0000000..6bca3b4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160-innblue22-ns +#@DESCRIPTION: Machine configuration for nrf9160-innblue22-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160-innblue22-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160_innblue22_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "nrf9160_innblue22_ns" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf new file mode 100755 index 0000000..2ad4fff --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160-innblue22 +#@DESCRIPTION: Machine configuration for nrf9160-innblue22 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160-innblue22 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160_innblue22 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "nrf9160_innblue22" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf new file mode 100755 index 0000000..b4be5b8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160dk-nrf52840 +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160dk-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nrf9160dk_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "nrf9160dk_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf new file mode 100755 index 0000000..b8501b2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160dk-nrf9160-ns +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf9160-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160dk-nrf9160-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160dk_nrf9160_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "nrf9160dk_nrf9160_ns" + diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf new file mode 100755 index 0000000..69fd059 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nrf9160dk-nrf9160 +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf9160 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nrf9160dk-nrf9160 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nrf9160dk_nrf9160 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "nrf9160dk_nrf9160" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-em.conf b/meta-zephyr- bsp/conf/machine/nsim-em.conf new file mode 100755 index 0000000..9274abe --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-em.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-em +#@DESCRIPTION: Machine configuration for nsim-em , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-em = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: nsim_em + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_em" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf b/meta- zephyr-bsp/conf/machine/nsim-em7d-v22.conf new file mode 100755 index 0000000..a7f9950 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-em7d-v22 +#@DESCRIPTION: Machine configuration for nsim-em7d-v22 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-em7d-v22 = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: nsim_em7d_v22 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_em7d_v22" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf b/meta- zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf new file mode 100755 index 0000000..5d5718a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-hs-mpuv6 +#@DESCRIPTION: Machine configuration for nsim-hs-mpuv6 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-hs-mpuv6 = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: nsim_hs_mpuv6 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_hs_mpuv6" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf b/meta- zephyr-bsp/conf/machine/nsim-hs-smp.conf new file mode 100755 index 0000000..1c88f60 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-hs-smp +#@DESCRIPTION: Machine configuration for nsim-hs-smp , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-hs-smp = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: nsim_hs_smp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_hs_smp" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs.conf b/meta-zephyr- bsp/conf/machine/nsim-hs.conf new file mode 100755 index 0000000..83ce5a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-hs.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-hs +#@DESCRIPTION: Machine configuration for nsim-hs , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-hs = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: nsim_hs + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_hs" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf b/meta- zephyr-bsp/conf/machine/nsim-hs6x-smp.conf new file mode 100755 index 0000000..f7547f9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-hs6x-smp +#@DESCRIPTION: Machine configuration for nsim-hs6x-smp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-hs6x-smp = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64 +# ARCH: arc +# BOARD: nsim_hs6x_smp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_hs6x_smp" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs6x.conf b/meta- zephyr-bsp/conf/machine/nsim-hs6x.conf new file mode 100755 index 0000000..8de4f88 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-hs6x.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-hs6x +#@DESCRIPTION: Machine configuration for nsim-hs6x , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-hs6x = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64 +# ARCH: arc +# BOARD: nsim_hs6x + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_hs6x" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack- guard.conf b/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack- guard.conf new file mode 100755 index 0000000..ab77f07 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack-guard.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-sem-mpu-stack-guard +#@DESCRIPTION: Machine configuration for nsim-sem-mpu-stack-guard , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-sem-mpu-stack-guard = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: nsim_sem_mpu_stack_guard + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_sem_mpu_stack_guard" + diff --git a/meta-zephyr-bsp/conf/machine/nsim-sem.conf b/meta- zephyr-bsp/conf/machine/nsim-sem.conf new file mode 100755 index 0000000..d19e14d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nsim-sem.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nsim-sem +#@DESCRIPTION: Machine configuration for nsim-sem , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nsim-sem = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: em4_fpuda +# ARCH: arc +# BOARD: nsim_sem + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nsim_sem" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf b/meta- zephyr-bsp/conf/machine/nucleo-f030r8.conf new file mode 100755 index 0000000..4c87cb1 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f030r8 +#@DESCRIPTION: Machine configuration for nucleo-f030r8 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f030r8 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nucleo_f030r8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F030x8 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f030r8" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf b/meta- zephyr-bsp/conf/machine/nucleo-f031k6.conf new file mode 100755 index 0000000..129bfda --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f031k6 +#@DESCRIPTION: Machine configuration for nucleo-f031k6 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f031k6 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nucleo_f031k6 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F031x6 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f031k6" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf b/meta- zephyr-bsp/conf/machine/nucleo-f070rb.conf new file mode 100755 index 0000000..c055cac --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f070rb +#@DESCRIPTION: Machine configuration for nucleo-f070rb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f070rb = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nucleo_f070rb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F070xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f070rb" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf b/meta- zephyr-bsp/conf/machine/nucleo-f091rc.conf new file mode 100755 index 0000000..787d24c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f091rc +#@DESCRIPTION: Machine configuration for nucleo-f091rc , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f091rc = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: nucleo_f091rc + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F091xC -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f091rc" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf b/meta- zephyr-bsp/conf/machine/nucleo-f103rb.conf new file mode 100755 index 0000000..6eef806 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f103rb +#@DESCRIPTION: Machine configuration for nucleo-f103rb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f103rb = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: nucleo_f103rb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f103rb" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-f207zg.conf new file mode 100755 index 0000000..ec434a0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f207zg +#@DESCRIPTION: Machine configuration for nucleo-f207zg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f207zg = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: nucleo_f207zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F207xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f207zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf b/meta- zephyr-bsp/conf/machine/nucleo-f302r8.conf new file mode 100755 index 0000000..195aa71 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f302r8 +#@DESCRIPTION: Machine configuration for nucleo-f302r8 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f302r8 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f302r8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F302x8 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f302r8" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf b/meta- zephyr-bsp/conf/machine/nucleo-f303k8.conf new file mode 100755 index 0000000..49974a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f303k8 +#@DESCRIPTION: Machine configuration for nucleo-f303k8 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f303k8 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f303k8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F303x8 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f303k8" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f303re.conf b/meta- zephyr-bsp/conf/machine/nucleo-f303re.conf new file mode 100755 index 0000000..c28aeb8 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f303re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f303re +#@DESCRIPTION: Machine configuration for nucleo-f303re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f303re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f303re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F303xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f303re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf b/meta- zephyr-bsp/conf/machine/nucleo-f334r8.conf new file mode 100755 index 0000000..7ee5162 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f334r8 +#@DESCRIPTION: Machine configuration for nucleo-f334r8 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f334r8 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f334r8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F334x8 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f334r8" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f401re.conf b/meta- zephyr-bsp/conf/machine/nucleo-f401re.conf new file mode 100755 index 0000000..a325f66 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f401re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f401re +#@DESCRIPTION: Machine configuration for nucleo-f401re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f401re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f401re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f401re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf b/meta- zephyr-bsp/conf/machine/nucleo-f410rb.conf new file mode 100755 index 0000000..400ea54 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f410rb +#@DESCRIPTION: Machine configuration for nucleo-f410rb , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f410rb = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f410rb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F410Rx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f410rb" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f411re.conf b/meta- zephyr-bsp/conf/machine/nucleo-f411re.conf new file mode 100755 index 0000000..0c81906 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f411re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f411re +#@DESCRIPTION: Machine configuration for nucleo-f411re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f411re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f411re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f411re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-f412zg.conf new file mode 100755 index 0000000..0e9d6f3 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f412zg +#@DESCRIPTION: Machine configuration for nucleo-f412zg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f412zg = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f412zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F412Zx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f412zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf b/meta- zephyr-bsp/conf/machine/nucleo-f413zh.conf new file mode 100755 index 0000000..3be787d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f413zh +#@DESCRIPTION: Machine configuration for nucleo-f413zh , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f413zh = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f413zh + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F413xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f413zh" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf b/meta- zephyr-bsp/conf/machine/nucleo-f429zi.conf new file mode 100755 index 0000000..320b7d6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f429zi +#@DESCRIPTION: Machine configuration for nucleo-f429zi , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f429zi = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f429zi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F429xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f429zi" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f446re.conf b/meta- zephyr-bsp/conf/machine/nucleo-f446re.conf new file mode 100755 index 0000000..aed71fc --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f446re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f446re +#@DESCRIPTION: Machine configuration for nucleo-f446re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f446re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_f446re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F446xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f446re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-f746zg.conf new file mode 100755 index 0000000..2da861c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f746zg +#@DESCRIPTION: Machine configuration for nucleo-f746zg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f746zg = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_f746zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F746xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f746zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-f756zg.conf new file mode 100755 index 0000000..628213a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f756zg +#@DESCRIPTION: Machine configuration for nucleo-f756zg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f756zg = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_f756zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F756xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f756zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf b/meta- zephyr-bsp/conf/machine/nucleo-f767zi.conf new file mode 100755 index 0000000..2809f4b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-f767zi +#@DESCRIPTION: Machine configuration for nucleo-f767zi , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-f767zi = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_f767zi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F767xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_f767zi" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf b/meta- zephyr-bsp/conf/machine/nucleo-g071rb.conf new file mode 100755 index 0000000..32eed89 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-g071rb +#@DESCRIPTION: Machine configuration for nucleo-g071rb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-g071rb = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_g071rb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G071xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_g071rb" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf b/meta- zephyr-bsp/conf/machine/nucleo-g0b1re.conf new file mode 100755 index 0000000..b5845bb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-g0b1re +#@DESCRIPTION: Machine configuration for nucleo-g0b1re , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-g0b1re = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_g0b1re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G0B1xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_g0b1re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf b/meta- zephyr-bsp/conf/machine/nucleo-g431rb.conf new file mode 100755 index 0000000..0a22503 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-g431rb +#@DESCRIPTION: Machine configuration for nucleo-g431rb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-g431rb = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_g431rb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G431xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000" + +ZEPHYR_BOARD = "nucleo_g431rb" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g474re.conf b/meta- zephyr-bsp/conf/machine/nucleo-g474re.conf new file mode 100755 index 0000000..cd22101 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-g474re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-g474re +#@DESCRIPTION: Machine configuration for nucleo-g474re , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-g474re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_g474re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G474xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000" + +ZEPHYR_BOARD = "nucleo_g474re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-h723zg.conf new file mode 100755 index 0000000..ac381bd --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-h723zg +#@DESCRIPTION: Machine configuration for nucleo-h723zg , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-h723zg = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_h723zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H723xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_h723zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf b/meta- zephyr-bsp/conf/machine/nucleo-h743zi.conf new file mode 100755 index 0000000..1a00dfa --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-h743zi +#@DESCRIPTION: Machine configuration for nucleo-h743zi , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-h743zi = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_h743zi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H743xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_h743zi" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf new file mode 100755 index 0000000..3f06beb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-h745zi-q-m4 +#@DESCRIPTION: Machine configuration for nucleo-h745zi-q-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-h745zi-q-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_h745zi_q_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H745xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_h745zi_q_m4" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf new file mode 100755 index 0000000..bd08436 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-h745zi-q-m7 +#@DESCRIPTION: Machine configuration for nucleo-h745zi-q-m7 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-h745zi-q-m7 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_h745zi_q_m7 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H745xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_h745zi_q_m7" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf b/meta- zephyr-bsp/conf/machine/nucleo-h753zi.conf new file mode 100755 index 0000000..06d9045 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-h753zi +#@DESCRIPTION: Machine configuration for nucleo-h753zi , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-h753zi = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: nucleo_h753zi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H753xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_h753zi" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf b/meta- zephyr-bsp/conf/machine/nucleo-l011k4.conf new file mode 100755 index 0000000..d8ddf96 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l011k4 +#@DESCRIPTION: Machine configuration for nucleo-l011k4 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l011k4 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_l011k4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L011xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l011k4" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf b/meta- zephyr-bsp/conf/machine/nucleo-l031k6.conf new file mode 100755 index 0000000..e2a441e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l031k6 +#@DESCRIPTION: Machine configuration for nucleo-l031k6 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l031k6 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_l031k6 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L031xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l031k6" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf b/meta- zephyr-bsp/conf/machine/nucleo-l053r8.conf new file mode 100755 index 0000000..b5fd303 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l053r8 +#@DESCRIPTION: Machine configuration for nucleo-l053r8 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l053r8 = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_l053r8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L053xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l053r8" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf b/meta- zephyr-bsp/conf/machine/nucleo-l073rz.conf new file mode 100755 index 0000000..91bb63e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l073rz +#@DESCRIPTION: Machine configuration for nucleo-l073rz , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l073rz = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: nucleo_l073rz + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L073xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l073rz" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l152re.conf b/meta- zephyr-bsp/conf/machine/nucleo-l152re.conf new file mode 100755 index 0000000..4fe8554 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l152re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l152re +#@DESCRIPTION: Machine configuration for nucleo-l152re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l152re = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: nucleo_l152re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L152xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l152re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf b/meta- zephyr-bsp/conf/machine/nucleo-l412rb-p.conf new file mode 100755 index 0000000..6f48a3c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l412rb-p +#@DESCRIPTION: Machine configuration for nucleo-l412rb-p , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l412rb-p = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l412rb_p + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L412xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l412rb_p" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf b/meta- zephyr-bsp/conf/machine/nucleo-l432kc.conf new file mode 100755 index 0000000..a28366f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l432kc +#@DESCRIPTION: Machine configuration for nucleo-l432kc , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l432kc = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l432kc + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L432xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l432kc" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf b/meta- zephyr-bsp/conf/machine/nucleo-l433rc-p.conf new file mode 100755 index 0000000..325bfab --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l433rc-p +#@DESCRIPTION: Machine configuration for nucleo-l433rc-p , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l433rc-p = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l433rc_p + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L433xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l433rc_p" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf b/meta- zephyr-bsp/conf/machine/nucleo-l452re-p.conf new file mode 100755 index 0000000..4fe3fa4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l452re-p +#@DESCRIPTION: Machine configuration for nucleo-l452re-p , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l452re-p = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l452re_p + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L452xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l452re_p" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l452re.conf b/meta- zephyr-bsp/conf/machine/nucleo-l452re.conf new file mode 100755 index 0000000..e91db35 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l452re.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l452re +#@DESCRIPTION: Machine configuration for nucleo-l452re , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l452re = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l452re + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L452xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l452re" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf b/meta- zephyr-bsp/conf/machine/nucleo-l476rg.conf new file mode 100755 index 0000000..21fae97 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l476rg +#@DESCRIPTION: Machine configuration for nucleo-l476rg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l476rg = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l476rg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L476xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l476rg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf b/meta- zephyr-bsp/conf/machine/nucleo-l496zg.conf new file mode 100755 index 0000000..d2c8f97 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l496zg +#@DESCRIPTION: Machine configuration for nucleo-l496zg , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l496zg = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l496zg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L496xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l496zg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf b/meta- zephyr-bsp/conf/machine/nucleo-l4r5zi.conf new file mode 100755 index 0000000..5f6df9c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l4r5zi +#@DESCRIPTION: Machine configuration for nucleo-l4r5zi , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l4r5zi = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_l4r5zi + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L4R5xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l4r5zi" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf new file mode 100755 index 0000000..5b1ecb9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l552ze-q-ns +#@DESCRIPTION: Machine configuration for nucleo-l552ze-q-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l552ze-q-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nucleo_l552ze_q_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L552xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l552ze_q_ns" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q.conf b/meta- zephyr-bsp/conf/machine/nucleo-l552ze-q.conf new file mode 100755 index 0000000..c5daeb0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-l552ze-q +#@DESCRIPTION: Machine configuration for nucleo-l552ze-q , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-l552ze-q = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nucleo_l552ze_q + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L552xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_l552ze_q" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-u575zi-q.conf b/meta- zephyr-bsp/conf/machine/nucleo-u575zi-q.conf new file mode 100755 index 0000000..1c27ab9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-u575zi-q.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-u575zi-q +#@DESCRIPTION: Machine configuration for nucleo-u575zi-q , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-u575zi-q = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: nucleo_u575zi_q + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32U575xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_u575zi_q" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf b/meta- zephyr-bsp/conf/machine/nucleo-wb55rg.conf new file mode 100755 index 0000000..6e0324a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-wb55rg +#@DESCRIPTION: Machine configuration for nucleo-wb55rg , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-wb55rg = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_wb55rg + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32WB55xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=32000000" + +ZEPHYR_BOARD = "nucleo_wb55rg" + diff --git a/meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf b/meta- zephyr-bsp/conf/machine/nucleo-wl55jc.conf new file mode 100755 index 0000000..d2c4bd2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nucleo-wl55jc +#@DESCRIPTION: Machine configuration for nucleo-wl55jc , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_nucleo-wl55jc = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nucleo_wl55jc + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32WL55xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "nucleo_wl55jc" + diff --git a/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf b/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf new file mode 100755 index 0000000..bf36fd0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nuvoton-pfm-m487 +#@DESCRIPTION: Machine configuration for nuvoton-pfm-m487 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nuvoton-pfm-m487 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: nuvoton_pfm_m487 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "nuvoton_pfm_m487" + diff --git a/meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf b/meta- zephyr-bsp/conf/machine/nxp-adsp-imx8.conf new file mode 100755 index 0000000..52e38d1 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nxp-adsp-imx8 +#@DESCRIPTION: Machine configuration for nxp-adsp-imx8 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nxp-adsp-imx8 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: nxp_adsp_imx8 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nxp_adsp_imx8" + diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp- 2cores.conf b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp- 2cores.conf new file mode 100755 index 0000000..541a48c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-2cores.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nxp-ls1046ardb-smp-2cores +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb-smp-2cores , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nxp-ls1046ardb-smp-2cores = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a72 +# ARCH: arm64 +# BOARD: nxp_ls1046ardb_smp_2cores + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nxp_ls1046ardb_smp_2cores" + diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp- 4cores.conf b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp- 4cores.conf new file mode 100755 index 0000000..41ab288 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-4cores.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nxp-ls1046ardb-smp-4cores +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb-smp-4cores , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nxp-ls1046ardb-smp-4cores = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a72 +# ARCH: arm64 +# BOARD: nxp_ls1046ardb_smp_4cores + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nxp_ls1046ardb_smp_4cores" + diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf b/meta- zephyr-bsp/conf/machine/nxp-ls1046ardb.conf new file mode 100755 index 0000000..37b4e58 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: nxp-ls1046ardb +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_nxp-ls1046ardb = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a72 +# ARCH: arm64 +# BOARD: nxp_ls1046ardb + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "nxp_ls1046ardb" + diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf b/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf new file mode 100755 index 0000000..782f341 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: olimex-stm32-e407 +#@DESCRIPTION: Machine configuration for olimex-stm32-e407 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_olimex-stm32-e407 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: olimex_stm32_e407 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000" + +ZEPHYR_BOARD = "olimex_stm32_e407" + diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf b/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf new file mode 100755 index 0000000..f492f77 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: olimex-stm32-h103 +#@DESCRIPTION: Machine configuration for olimex-stm32-h103 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_olimex-stm32-h103 = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: olimex_stm32_h103 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "olimex_stm32_h103" + diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf b/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf new file mode 100755 index 0000000..9ac884b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: olimex-stm32-h407 +#@DESCRIPTION: Machine configuration for olimex-stm32-h407 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_olimex-stm32-h407 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: olimex_stm32_h407 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000" + +ZEPHYR_BOARD = "olimex_stm32_h407" + diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf b/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf new file mode 100755 index 0000000..11db9a2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: olimex-stm32-p405 +#@DESCRIPTION: Machine configuration for olimex-stm32-p405 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_olimex-stm32-p405 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: olimex_stm32_p405 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F405xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "olimex_stm32_p405" + diff --git a/meta-zephyr-bsp/conf/machine/olimexino-stm32.conf b/meta- zephyr-bsp/conf/machine/olimexino-stm32.conf new file mode 100755 index 0000000..33cd43d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/olimexino-stm32.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: olimexino-stm32 +#@DESCRIPTION: Machine configuration for olimexino-stm32 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_olimexino-stm32 = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: olimexino_stm32 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "olimexino_stm32" + diff --git a/meta-zephyr-bsp/conf/machine/particle-argon.conf b/meta- zephyr-bsp/conf/machine/particle-argon.conf new file mode 100755 index 0000000..fe22012 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/particle-argon.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: particle-argon +#@DESCRIPTION: Machine configuration for particle-argon , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_particle-argon = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: particle_argon + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "particle_argon" + diff --git a/meta-zephyr-bsp/conf/machine/particle-boron.conf b/meta- zephyr-bsp/conf/machine/particle-boron.conf new file mode 100755 index 0000000..3c2853c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/particle-boron.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: particle-boron +#@DESCRIPTION: Machine configuration for particle-boron , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_particle-boron = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: particle_boron + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "particle_boron" + diff --git a/meta-zephyr-bsp/conf/machine/particle-xenon.conf b/meta- zephyr-bsp/conf/machine/particle-xenon.conf new file mode 100755 index 0000000..8adcd1f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/particle-xenon.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: particle-xenon +#@DESCRIPTION: Machine configuration for particle-xenon , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_particle-xenon = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: particle_xenon + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "particle_xenon" + diff --git a/meta-zephyr-bsp/conf/machine/pico-pi-m4.conf b/meta- zephyr-bsp/conf/machine/pico-pi-m4.conf new file mode 100755 index 0000000..6019337 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/pico-pi-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: pico-pi-m4 +#@DESCRIPTION: Machine configuration for pico-pi-m4 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_pico-pi-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: pico_pi_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "pico_pi_m4" + diff --git a/meta-zephyr-bsp/conf/machine/pinetime-devkit0.conf b/meta- zephyr-bsp/conf/machine/pinetime-devkit0.conf new file mode 100755 index 0000000..0e6a7b7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/pinetime-devkit0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: pinetime-devkit0 +#@DESCRIPTION: Machine configuration for pinetime-devkit0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_pinetime-devkit0 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: pinetime_devkit0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "pinetime_devkit0" + diff --git a/meta-zephyr-bsp/conf/machine/pinnacle-100-dvk.conf b/meta- zephyr-bsp/conf/machine/pinnacle-100-dvk.conf new file mode 100755 index 0000000..11b8e60 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/pinnacle-100-dvk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: pinnacle-100-dvk +#@DESCRIPTION: Machine configuration for pinnacle-100-dvk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_pinnacle-100-dvk = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: pinnacle_100_dvk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "pinnacle_100_dvk" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-em.conf b/meta- zephyr-bsp/conf/machine/qemu-arc-em.conf new file mode 100755 index 0000000..4bbe803 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-em.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-arc-em +#@DESCRIPTION: Machine configuration for qemu-arc-em , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-arc-em = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem +# ARCH: arc +# BOARD: qemu_arc_em + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_arc_em" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf b/meta- zephyr-bsp/conf/machine/qemu-arc-hs.conf new file mode 100755 index 0000000..10632a2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-arc-hs +#@DESCRIPTION: Machine configuration for qemu-arc-hs , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-arc-hs = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: archs +# ARCH: arc +# BOARD: qemu_arc_hs + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_arc_hs" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf b/meta- zephyr-bsp/conf/machine/qemu-arc-hs6x.conf new file mode 100755 index 0000000..2649946 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-arc-hs6x +#@DESCRIPTION: Machine configuration for qemu-arc-hs6x , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-arc-hs6x = "arc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64 +# ARCH: arc +# BOARD: qemu_arc_hs6x + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_arc_hs6x" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf new file mode 100755 index 0000000..c332358 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-cortex-a53-smp +#@DESCRIPTION: Machine configuration for qemu-cortex-a53-smp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-cortex-a53-smp = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a53 +# ARCH: arm64 +# BOARD: qemu_cortex_a53_smp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_cortex_a53_smp" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf new file mode 100755 index 0000000..8708a35 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-cortex-a53-xip +#@DESCRIPTION: Machine configuration for qemu-cortex-a53-xip , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-cortex-a53-xip = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a53 +# ARCH: arm64 +# BOARD: qemu_cortex_a53_xip + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_cortex_a53_xip" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53.conf b/meta- zephyr-bsp/conf/machine/qemu-cortex-a53.conf new file mode 100755 index 0000000..a78fd5a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-cortex-a53 +#@DESCRIPTION: Machine configuration for qemu-cortex-a53 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-cortex-a53 = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a53 +# ARCH: arm64 +# BOARD: qemu_cortex_a53 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_cortex_a53" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-m0.conf b/meta- zephyr-bsp/conf/machine/qemu-cortex-m0.conf new file mode 100755 index 0000000..efc12a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-m0.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-cortex-m0 +#@DESCRIPTION: Machine configuration for qemu-cortex-m0 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-cortex-m0 = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: qemu_cortex_m0 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF51 -DNRF51422_XXAA" + +ZEPHYR_BOARD = "qemu_cortex_m0" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-r5.conf b/meta- zephyr-bsp/conf/machine/qemu-cortex-r5.conf new file mode 100755 index 0000000..bf046e0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-r5.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-cortex-r5 +#@DESCRIPTION: Machine configuration for qemu-cortex-r5 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-cortex-r5 = "arm" + +DEFAULTUNE ?= "cortexr5" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- r5 +# ARCH: arm +# BOARD: qemu_cortex_r5 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "qemu_cortex_r5" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-leon3.conf b/meta- zephyr-bsp/conf/machine/qemu-leon3.conf new file mode 100755 index 0000000..ce2d957 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-leon3.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-leon3 +#@DESCRIPTION: Machine configuration for qemu-leon3 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-leon3 = "sparc" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: sparc +# BOARD: qemu_leon3 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_leon3" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv32-xip.conf b/meta- zephyr-bsp/conf/machine/qemu-riscv32-xip.conf new file mode 100755 index 0000000..48f1192 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv32-xip.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-riscv32-xip +#@DESCRIPTION: Machine configuration for qemu-riscv32-xip , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-riscv32-xip = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: qemu_riscv32_xip + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_riscv32_xip" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv32.conf b/meta- zephyr-bsp/conf/machine/qemu-riscv32.conf new file mode 100755 index 0000000..437dfbb --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv32.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-riscv32 +#@DESCRIPTION: Machine configuration for qemu-riscv32 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-riscv32 = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: qemu_riscv32 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_riscv32" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv64.conf b/meta- zephyr-bsp/conf/machine/qemu-riscv64.conf new file mode 100755 index 0000000..9480ad5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv64.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-riscv64 +#@DESCRIPTION: Machine configuration for qemu-riscv64 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-riscv64 = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: qemu_riscv64 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_riscv64" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf b/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf new file mode 100755 index 0000000..b7e32ee --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-64-nokpti +#@DESCRIPTION: Machine configuration for qemu-x86-64-nokpti , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-64-nokpti = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_64_nokpti + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_64_nokpti" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-64.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-64.conf new file mode 100755 index 0000000..a7bd354 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-64.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-64 +#@DESCRIPTION: Machine configuration for qemu-x86-64 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-64 = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_64 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_64" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf b/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf new file mode 100755 index 0000000..7483f29 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-lakemont +#@DESCRIPTION: Machine configuration for qemu-x86-lakemont , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-lakemont = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_lakemont + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_lakemont" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nokpti.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-nokpti.conf new file mode 100755 index 0000000..25fa908 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nokpti.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-nokpti +#@DESCRIPTION: Machine configuration for qemu-x86-nokpti , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-nokpti = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_nokpti + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_nokpti" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf b/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf new file mode 100755 index 0000000..0736ada --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-nommu +#@DESCRIPTION: Machine configuration for qemu-x86-nommu , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-nommu = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_nommu + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_nommu" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nopae.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-nopae.conf new file mode 100755 index 0000000..3cffc87 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nopae.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-nopae +#@DESCRIPTION: Machine configuration for qemu-x86-nopae , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-nopae = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_nopae + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_nopae" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-tiny.conf new file mode 100755 index 0000000..edbc9c7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-tiny +#@DESCRIPTION: Machine configuration for qemu-x86-tiny , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-tiny = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_tiny + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_tiny" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-virt.conf new file mode 100755 index 0000000..8db6640 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-virt +#@DESCRIPTION: Machine configuration for qemu-x86-virt , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-virt = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_virt + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_virt" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf b/meta- zephyr-bsp/conf/machine/qemu-x86-xip.conf new file mode 100755 index 0000000..b4a2d2a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-x86-xip +#@DESCRIPTION: Machine configuration for qemu-x86-xip , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-x86-xip = "x86" + +DEFAULTUNE ?= "core2-32" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: qemu_x86_xip + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_x86_xip" + diff --git a/meta-zephyr-bsp/conf/machine/qemu-xtensa.conf b/meta- zephyr-bsp/conf/machine/qemu-xtensa.conf new file mode 100755 index 0000000..a664b42 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/qemu-xtensa.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: qemu-xtensa +#@DESCRIPTION: Machine configuration for qemu-xtensa , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_qemu-xtensa = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: qemu_xtensa + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "qemu_xtensa" + diff --git a/meta-zephyr-bsp/conf/machine/quick-feather.conf b/meta- zephyr-bsp/conf/machine/quick-feather.conf new file mode 100755 index 0000000..d2af1e5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/quick-feather.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: quick-feather +#@DESCRIPTION: Machine configuration for quick-feather , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_quick-feather = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: quick_feather + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "quick_feather" + diff --git a/meta-zephyr-bsp/conf/machine/rak4631-nrf52840.conf b/meta- zephyr-bsp/conf/machine/rak4631-nrf52840.conf new file mode 100755 index 0000000..286c003 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/rak4631-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: rak4631-nrf52840 +#@DESCRIPTION: Machine configuration for rak4631-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_rak4631-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: rak4631_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "rak4631_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/rak5010-nrf52840.conf b/meta- zephyr-bsp/conf/machine/rak5010-nrf52840.conf new file mode 100755 index 0000000..035f9ce --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/rak5010-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: rak5010-nrf52840 +#@DESCRIPTION: Machine configuration for rak5010-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_rak5010-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: rak5010_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "rak5010_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf b/meta- zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf new file mode 100755 index 0000000..2098895 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: rcar-h3ulcb-cr7 +#@DESCRIPTION: Machine configuration for rcar-h3ulcb-cr7 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_rcar-h3ulcb-cr7 = "arm" + +DEFAULTUNE ?= "cortexr7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- r7 +# ARCH: arm +# BOARD: rcar_h3ulcb_cr7 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "rcar_h3ulcb_cr7" + diff --git a/meta-zephyr-bsp/conf/machine/reel-board-v2.conf b/meta- zephyr-bsp/conf/machine/reel-board-v2.conf new file mode 100755 index 0000000..5db4d78 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/reel-board-v2.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: reel-board-v2 +#@DESCRIPTION: Machine configuration for reel-board-v2 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_reel-board-v2 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: reel_board_v2 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "reel_board_v2" + diff --git a/meta-zephyr-bsp/conf/machine/reel-board.conf b/meta- zephyr-bsp/conf/machine/reel-board.conf new file mode 100755 index 0000000..9528b52 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/reel-board.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: reel-board +#@DESCRIPTION: Machine configuration for reel-board , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_reel-board = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: reel_board + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "reel_board" + diff --git a/meta-zephyr-bsp/conf/machine/ronoth-lodev.conf b/meta- zephyr-bsp/conf/machine/ronoth-lodev.conf new file mode 100755 index 0000000..28468f0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ronoth-lodev.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ronoth-lodev +#@DESCRIPTION: Machine configuration for ronoth-lodev , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_ronoth-lodev = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: ronoth_lodev + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L073xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "ronoth_lodev" + diff --git a/meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf b/meta- zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf new file mode 100755 index 0000000..4a64e7c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ruuvi-ruuvitag +#@DESCRIPTION: Machine configuration for ruuvi-ruuvitag , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_ruuvi-ruuvitag = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ruuvi_ruuvitag + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "ruuvi_ruuvitag" + diff --git a/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf b/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf new file mode 100755 index 0000000..547c846 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: rv32m1-vega-ri5cy +#@DESCRIPTION: Machine configuration for rv32m1-vega-ri5cy , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_rv32m1-vega-ri5cy = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: rv32m1_vega_ri5cy + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DCPU_RV32M1_ri5cy -DXCVR_GENFSK_ENABLED" + +ZEPHYR_BOARD = "rv32m1_vega_ri5cy" + diff --git a/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf b/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf new file mode 100755 index 0000000..5abc687 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: rv32m1-vega-zero-riscy +#@DESCRIPTION: Machine configuration for rv32m1-vega-zero-riscy , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_rv32m1-vega-zero-riscy = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: rv32m1_vega_zero_riscy + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - DCPU_RV32M1_zero_riscy -DXCVR_GENFSK_ENABLED" + +ZEPHYR_BOARD = "rv32m1_vega_zero_riscy" + diff --git a/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf b/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf new file mode 100755 index 0000000..d4d81aa --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam-e70-xplained +#@DESCRIPTION: Machine configuration for sam-e70-xplained , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sam-e70-xplained = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: sam_e70_xplained + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam_e70_xplained" + diff --git a/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf b/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf new file mode 100755 index 0000000..6169e37 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam-e70b-xplained +#@DESCRIPTION: Machine configuration for sam-e70b-xplained , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sam-e70b-xplained = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: sam_e70b_xplained + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam_e70b_xplained" + diff --git a/meta-zephyr-bsp/conf/machine/sam-v71-xult.conf b/meta- zephyr-bsp/conf/machine/sam-v71-xult.conf new file mode 100755 index 0000000..0c3250e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam-v71-xult.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam-v71-xult +#@DESCRIPTION: Machine configuration for sam-v71-xult , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_sam-v71-xult = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: sam_v71_xult + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam_v71_xult" + diff --git a/meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf b/meta- zephyr-bsp/conf/machine/sam-v71b-xult.conf new file mode 100755 index 0000000..1034b68 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam-v71b-xult +#@DESCRIPTION: Machine configuration for sam-v71b-xult , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sam-v71b-xult = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: sam_v71b_xult + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam_v71b_xult" + diff --git a/meta-zephyr-bsp/conf/machine/sam4e-xpro.conf b/meta- zephyr-bsp/conf/machine/sam4e-xpro.conf new file mode 100755 index 0000000..e71ffc5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam4e-xpro.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam4e-xpro +#@DESCRIPTION: Machine configuration for sam4e-xpro , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_sam4e-xpro = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: sam4e_xpro + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam4e_xpro" + diff --git a/meta-zephyr-bsp/conf/machine/sam4l-ek.conf b/meta-zephyr- bsp/conf/machine/sam4l-ek.conf new file mode 100755 index 0000000..23ed071 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam4l-ek.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam4l-ek +#@DESCRIPTION: Machine configuration for sam4l-ek , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_sam4l-ek = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: sam4l_ek + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam4l_ek" + diff --git a/meta-zephyr-bsp/conf/machine/sam4s-xplained.conf b/meta- zephyr-bsp/conf/machine/sam4s-xplained.conf new file mode 100755 index 0000000..89c727f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sam4s-xplained.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sam4s-xplained +#@DESCRIPTION: Machine configuration for sam4s-xplained , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sam4s-xplained = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: sam4s_xplained + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "sam4s_xplained" + diff --git a/meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf b/meta- zephyr-bsp/conf/machine/seeeduino-xiao.conf new file mode 100755 index 0000000..1f7b81e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: seeeduino-xiao +#@DESCRIPTION: Machine configuration for seeeduino-xiao , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_seeeduino-xiao = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: seeeduino_xiao + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "seeeduino_xiao" + diff --git a/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf b/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf new file mode 100755 index 0000000..3ff8e20 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: segger-trb-stm32f407 +#@DESCRIPTION: Machine configuration for segger-trb-stm32f407 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_segger-trb-stm32f407 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: segger_trb_stm32f407 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000" + +ZEPHYR_BOARD = "segger_trb_stm32f407" + diff --git a/meta-zephyr-bsp/conf/machine/sensortile-box.conf b/meta- zephyr-bsp/conf/machine/sensortile-box.conf new file mode 100755 index 0000000..b41f126 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sensortile-box.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sensortile-box +#@DESCRIPTION: Machine configuration for sensortile-box , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sensortile-box = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: sensortile_box + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L4R9xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "sensortile_box" + diff --git a/meta-zephyr-bsp/conf/machine/serpente.conf b/meta-zephyr- bsp/conf/machine/serpente.conf new file mode 100755 index 0000000..de18f18 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/serpente.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: serpente +#@DESCRIPTION: Machine configuration for serpente , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_serpente = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: serpente + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "serpente" + diff --git a/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160- ns.conf b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160- ns.conf new file mode 100755 index 0000000..39cc155 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160- ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sparkfun-thing-plus-nrf9160-ns +#@DESCRIPTION: Machine configuration for sparkfun-thing-plus-nrf9160- ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sparkfun-thing-plus-nrf9160-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: sparkfun_thing_plus_nrf9160_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "sparkfun_thing_plus_nrf9160_ns" + diff --git a/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus- nrf9160.conf b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus- nrf9160.conf new file mode 100755 index 0000000..7940fa6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: sparkfun-thing-plus-nrf9160 +#@DESCRIPTION: Machine configuration for sparkfun-thing-plus-nrf9160 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_sparkfun-thing-plus-nrf9160 = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: sparkfun_thing_plus_nrf9160 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF9160_XXAA" + +ZEPHYR_BOARD = "sparkfun_thing_plus_nrf9160" + diff --git a/meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf b/meta- zephyr-bsp/conf/machine/steval-fcu001v1.conf new file mode 100755 index 0000000..1e058e5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: steval-fcu001v1 +#@DESCRIPTION: Machine configuration for steval-fcu001v1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_steval-fcu001v1 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: steval_fcu001v1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F401xC -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000" + +ZEPHYR_BOARD = "steval_fcu001v1" + diff --git a/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf b/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf new file mode 100755 index 0000000..e3348a4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32-min-dev-black +#@DESCRIPTION: Machine configuration for stm32-min-dev-black , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32-min-dev-black = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm32_min_dev_black + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32_min_dev_black" + diff --git a/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf b/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf new file mode 100755 index 0000000..1fbb5b0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32-min-dev-blue +#@DESCRIPTION: Machine configuration for stm32-min-dev-blue , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32-min-dev-blue = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm32_min_dev_blue + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32_min_dev_blue" + diff --git a/meta-zephyr-bsp/conf/machine/stm3210c-eval.conf b/meta- zephyr-bsp/conf/machine/stm3210c-eval.conf new file mode 100755 index 0000000..c60e849 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm3210c-eval.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm3210c-eval +#@DESCRIPTION: Machine configuration for stm3210c-eval , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm3210c-eval = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm3210c_eval + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F107xC -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm3210c_eval" + diff --git a/meta-zephyr-bsp/conf/machine/stm32373c-eval.conf b/meta- zephyr-bsp/conf/machine/stm32373c-eval.conf new file mode 100755 index 0000000..fe6b130 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32373c-eval.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32373c-eval +#@DESCRIPTION: Machine configuration for stm32373c-eval , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32373c-eval = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32373c_eval + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F373xC -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32373c_eval" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f0-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f0-disco.conf new file mode 100755 index 0000000..8b95d40 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f0-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f0-disco +#@DESCRIPTION: Machine configuration for stm32f0-disco , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f0-disco = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: stm32f0_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F051x8 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f0_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f030-demo.conf b/meta- zephyr-bsp/conf/machine/stm32f030-demo.conf new file mode 100755 index 0000000..852c174 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f030-demo.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f030-demo +#@DESCRIPTION: Machine configuration for stm32f030-demo , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f030-demo = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: stm32f030_demo + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F030x6 -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f030_demo" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f072-eval.conf b/meta- zephyr-bsp/conf/machine/stm32f072-eval.conf new file mode 100755 index 0000000..a4ffaa5 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f072-eval.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f072-eval +#@DESCRIPTION: Machine configuration for stm32f072-eval , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f072-eval = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: stm32f072_eval + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F072xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f072_eval" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf b/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf new file mode 100755 index 0000000..1500e02 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f072b-disco +#@DESCRIPTION: Machine configuration for stm32f072b-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f072b-disco = "arm" + +DEFAULTUNE ?= "cortexm0" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0 +# ARCH: arm +# BOARD: stm32f072b_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F072xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f072b_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f103-mini.conf b/meta- zephyr-bsp/conf/machine/stm32f103-mini.conf new file mode 100755 index 0000000..3aab904 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f103-mini.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f103-mini +#@DESCRIPTION: Machine configuration for stm32f103-mini , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f103-mini = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm32f103_mini + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f103_mini" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f3-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f3-disco.conf new file mode 100755 index 0000000..68d4ad0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f3-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f3-disco +#@DESCRIPTION: Machine configuration for stm32f3-disco , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f3-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f3_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F303xC -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f3_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f4-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f4-disco.conf new file mode 100755 index 0000000..f7fb1ad --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f4-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f4-disco +#@DESCRIPTION: Machine configuration for stm32f4-disco , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f4-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f4_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f4_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf b/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf new file mode 100755 index 0000000..29494b4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f411e-disco +#@DESCRIPTION: Machine configuration for stm32f411e-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f411e-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f411e_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f411e_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f412g-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f412g-disco.conf new file mode 100755 index 0000000..6839c05 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f412g-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f412g-disco +#@DESCRIPTION: Machine configuration for stm32f412g-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f412g-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f412g_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F412Zx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f412g_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f429i-disc1.conf b/meta- zephyr-bsp/conf/machine/stm32f429i-disc1.conf new file mode 100755 index 0000000..1151ef9 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f429i-disc1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f429i-disc1 +#@DESCRIPTION: Machine configuration for stm32f429i-disc1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f429i-disc1 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f429i_disc1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F429xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f429i_disc1" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f469i-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f469i-disco.conf new file mode 100755 index 0000000..c41e23c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f469i-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f469i-disco +#@DESCRIPTION: Machine configuration for stm32f469i-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f469i-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32f469i_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F469xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32f469i_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf b/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf new file mode 100755 index 0000000..b465307 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f723e-disco +#@DESCRIPTION: Machine configuration for stm32f723e-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f723e-disco = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: stm32f723e_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F723xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "stm32f723e_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f746g-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f746g-disco.conf new file mode 100755 index 0000000..d8a4800 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f746g-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f746g-disco +#@DESCRIPTION: Machine configuration for stm32f746g-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f746g-disco = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: stm32f746g_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F746xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "stm32f746g_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32f769i-disco.conf b/meta- zephyr-bsp/conf/machine/stm32f769i-disco.conf new file mode 100755 index 0000000..290366b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32f769i-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32f769i-disco +#@DESCRIPTION: Machine configuration for stm32f769i-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32f769i-disco = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: stm32f769i_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F769xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "stm32f769i_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf b/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf new file mode 100755 index 0000000..e0d3102 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32g0316-disco +#@DESCRIPTION: Machine configuration for stm32g0316-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32g0316-disco = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: stm32g0316_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G031xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32g0316_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf b/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf new file mode 100755 index 0000000..33a7e3e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32g071b-disco +#@DESCRIPTION: Machine configuration for stm32g071b-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32g071b-disco = "arm" + +DEFAULTUNE ?= "cortexm0plus" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m0plus +# ARCH: arm +# BOARD: stm32g071b_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32G071xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32g071b_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf b/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf new file mode 100755 index 0000000..391175a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32h735g-disco +#@DESCRIPTION: Machine configuration for stm32h735g-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32h735g-disco = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: stm32h735g_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H735xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "stm32h735g_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf new file mode 100755 index 0000000..7e90cd0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32h747i-disco-m4 +#@DESCRIPTION: Machine configuration for stm32h747i-disco-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32h747i-disco-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32h747i_disco_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H747xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32h747i_disco_m4" + diff --git a/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf new file mode 100755 index 0000000..659586d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32h747i-disco-m7 +#@DESCRIPTION: Machine configuration for stm32h747i-disco-m7 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32h747i-disco-m7 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: stm32h747i_disco_m7 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32H747xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000" + +ZEPHYR_BOARD = "stm32h747i_disco_m7" + diff --git a/meta-zephyr-bsp/conf/machine/stm32l1-disco.conf b/meta- zephyr-bsp/conf/machine/stm32l1-disco.conf new file mode 100755 index 0000000..5e98c44 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32l1-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32l1-disco +#@DESCRIPTION: Machine configuration for stm32l1-disco , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32l1-disco = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm32l1_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L151xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32l1_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32l476g-disco.conf b/meta- zephyr-bsp/conf/machine/stm32l476g-disco.conf new file mode 100755 index 0000000..d0249ae --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32l476g-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32l476g-disco +#@DESCRIPTION: Machine configuration for stm32l476g-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32l476g-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32l476g_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L476xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32l476g_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32l496g-disco.conf b/meta- zephyr-bsp/conf/machine/stm32l496g-disco.conf new file mode 100755 index 0000000..3e79086 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32l496g-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32l496g-disco +#@DESCRIPTION: Machine configuration for stm32l496g-disco , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32l496g-disco = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: stm32l496g_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L496xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32l496g_disco" + diff --git a/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf b/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf new file mode 100755 index 0000000..3e7fbac --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32l562e-dk-ns +#@DESCRIPTION: Machine configuration for stm32l562e-dk-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32l562e-dk-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: stm32l562e_dk_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L562xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32l562e_dk_ns" + diff --git a/meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf b/meta- zephyr-bsp/conf/machine/stm32l562e-dk.conf new file mode 100755 index 0000000..1793676 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32l562e-dk +#@DESCRIPTION: Machine configuration for stm32l562e-dk , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32l562e-dk = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: stm32l562e_dk + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32L562xx -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32l562e_dk" + diff --git a/meta-zephyr-bsp/conf/machine/stm32vl-disco.conf b/meta- zephyr-bsp/conf/machine/stm32vl-disco.conf new file mode 100755 index 0000000..9bf439d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/stm32vl-disco.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: stm32vl-disco +#@DESCRIPTION: Machine configuration for stm32vl-disco , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_stm32vl-disco = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: stm32vl_disco + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F100xB -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "stm32vl_disco" + diff --git a/meta-zephyr-bsp/conf/machine/teensy40.conf b/meta-zephyr- bsp/conf/machine/teensy40.conf new file mode 100755 index 0000000..a1ca582 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/teensy40.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: teensy40 +#@DESCRIPTION: Machine configuration for teensy40 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_teensy40 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: teensy40 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1062DVL6A - DXIP_BOOT_HEADER_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "teensy40" + diff --git a/meta-zephyr-bsp/conf/machine/teensy41.conf b/meta-zephyr- bsp/conf/machine/teensy41.conf new file mode 100755 index 0000000..5469104 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/teensy41.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: teensy41 +#@DESCRIPTION: Machine configuration for teensy41 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_teensy41 = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: teensy41 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MIMXRT1062DVJ6A - DXIP_BOOT_HEADER_ENABLE=1 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "teensy41" + diff --git a/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf b/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf new file mode 100755 index 0000000..a40d44f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: thingy52-nrf52832 +#@DESCRIPTION: Machine configuration for thingy52-nrf52832 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_thingy52-nrf52832 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: thingy52_nrf52832 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "thingy52_nrf52832" + diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp- ns.conf b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp-ns.conf new file mode 100755 index 0000000..fe583f4 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: thingy53-nrf5340-cpuapp-ns +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpuapp-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_thingy53-nrf5340-cpuapp-ns = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: thingy53_nrf5340_cpuapp_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION - DNRF_TRUSTZONE_NONSECURE" + +ZEPHYR_BOARD = "thingy53_nrf5340_cpuapp_ns" + diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf new file mode 100755 index 0000000..a835bc6 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: thingy53-nrf5340-cpuapp +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpuapp , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_thingy53-nrf5340-cpuapp = "arm" + +DEFAULTUNE ?= "armv8m-maine" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33 +# ARCH: arm +# BOARD: thingy53_nrf5340_cpuapp + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_APPLICATION" + +ZEPHYR_BOARD = "thingy53_nrf5340_cpuapp" + diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf new file mode 100755 index 0000000..96ce13f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: thingy53-nrf5340-cpunet +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpunet , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_thingy53-nrf5340-cpunet = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: thingy53_nrf5340_cpunet + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF5340_XXAA_NETWORK" + +ZEPHYR_BOARD = "thingy53_nrf5340_cpunet" + diff --git a/meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf b/meta- zephyr-bsp/conf/machine/tlsr9518adk80d.conf new file mode 100755 index 0000000..b2fc8f0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: tlsr9518adk80d +#@DESCRIPTION: Machine configuration for tlsr9518adk80d , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_tlsr9518adk80d = "riscv" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: riscv +# BOARD: tlsr9518adk80d + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "tlsr9518adk80d" + diff --git a/meta-zephyr-bsp/conf/machine/twr-ke18f.conf b/meta- zephyr-bsp/conf/machine/twr-ke18f.conf new file mode 100755 index 0000000..f037f0e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/twr-ke18f.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: twr-ke18f +#@DESCRIPTION: Machine configuration for twr-ke18f , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_twr-ke18f = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: twr_ke18f + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKE18F512VLL16 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "twr_ke18f" + diff --git a/meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf b/meta- zephyr-bsp/conf/machine/twr-kv58f220m.conf new file mode 100755 index 0000000..bdaeb2b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: twr-kv58f220m +#@DESCRIPTION: Machine configuration for twr-kv58f220m , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_twr-kv58f220m = "arm" + +DEFAULTUNE ?= "cortexm7" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m7 +# ARCH: arm +# BOARD: twr_kv58f220m + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKV58F1M0VLQ24 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE1024 -DNDEBUG" + +ZEPHYR_BOARD = "twr_kv58f220m" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf new file mode 100755 index 0000000..2288d05 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd300eval-nrf52832 +#@DESCRIPTION: Machine configuration for ubx-bmd300eval-nrf52832 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd300eval-nrf52832 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd300eval_nrf52832 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "ubx_bmd300eval_nrf52832" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf new file mode 100755 index 0000000..db66a8a --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd330eval-nrf52810 +#@DESCRIPTION: Machine configuration for ubx-bmd330eval-nrf52810 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd330eval-nrf52810 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd330eval_nrf52810 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52810_XXAA" + +ZEPHYR_BOARD = "ubx_bmd330eval_nrf52810" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf new file mode 100755 index 0000000..5b714e0 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd340eval-nrf52840 +#@DESCRIPTION: Machine configuration for ubx-bmd340eval-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd340eval-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd340eval_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "ubx_bmd340eval_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf new file mode 100755 index 0000000..7cd456c --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd345eval-nrf52840 +#@DESCRIPTION: Machine configuration for ubx-bmd345eval-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd345eval-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd345eval_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "ubx_bmd345eval_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf new file mode 100755 index 0000000..ba42a61 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd360eval-nrf52811 +#@DESCRIPTION: Machine configuration for ubx-bmd360eval-nrf52811 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd360eval-nrf52811 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd360eval_nrf52811 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52811_XXAA" + +ZEPHYR_BOARD = "ubx_bmd360eval_nrf52811" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf b/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf new file mode 100755 index 0000000..7df59ca --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-bmd380eval-nrf52840 +#@DESCRIPTION: Machine configuration for ubx-bmd380eval-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-bmd380eval-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_bmd380eval_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "ubx_bmd380eval_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf b/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf new file mode 100755 index 0000000..da3352b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-evkannab1-nrf52832 +#@DESCRIPTION: Machine configuration for ubx-evkannab1-nrf52832 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-evkannab1-nrf52832 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_evkannab1_nrf52832 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "ubx_evkannab1_nrf52832" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf b/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf new file mode 100755 index 0000000..c80bc65 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-evkninab1-nrf52832 +#@DESCRIPTION: Machine configuration for ubx-evkninab1-nrf52832 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-evkninab1-nrf52832 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_evkninab1_nrf52832 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA" + +ZEPHYR_BOARD = "ubx_evkninab1_nrf52832" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf b/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf new file mode 100755 index 0000000..af7cdef --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-evkninab3-nrf52840 +#@DESCRIPTION: Machine configuration for ubx-evkninab3-nrf52840 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-evkninab3-nrf52840 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_evkninab3_nrf52840 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52840_XXAA" + +ZEPHYR_BOARD = "ubx_evkninab3_nrf52840" + diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf b/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf new file mode 100755 index 0000000..f8c3c77 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: ubx-evkninab4-nrf52833 +#@DESCRIPTION: Machine configuration for ubx-evkninab4-nrf52833 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_ubx-evkninab4-nrf52833 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: ubx_evkninab4_nrf52833 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DNRF52833_XXAA" + +ZEPHYR_BOARD = "ubx_evkninab4_nrf52833" + diff --git a/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf b/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf new file mode 100755 index 0000000..a518c7b --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: udoo-neo-full-m4 +#@DESCRIPTION: Machine configuration for udoo-neo-full-m4 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_udoo-neo-full-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: udoo_neo_full_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "udoo_neo_full_m4" + diff --git a/meta-zephyr-bsp/conf/machine/up-squared.conf b/meta- zephyr-bsp/conf/machine/up-squared.conf new file mode 100755 index 0000000..ce95c95 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/up-squared.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: up-squared +#@DESCRIPTION: Machine configuration for up-squared , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_up-squared = "x86" + +DEFAULTUNE ?= "core2-64" + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: x86 +# BOARD: up_squared + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "up_squared" + diff --git a/meta-zephyr-bsp/conf/machine/usb-kw24d512.conf b/meta- zephyr-bsp/conf/machine/usb-kw24d512.conf new file mode 100755 index 0000000..434f2bd --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/usb-kw24d512.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: usb-kw24d512 +#@DESCRIPTION: Machine configuration for usb-kw24d512 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_usb-kw24d512 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: usb_kw24d512 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DCPU_MKW24D512VHA5 - DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG" + +ZEPHYR_BOARD = "usb_kw24d512" + diff --git a/meta-zephyr-bsp/conf/machine/v2m-beetle.conf b/meta- zephyr-bsp/conf/machine/v2m-beetle.conf new file mode 100755 index 0000000..b393ca2 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/v2m-beetle.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: v2m-beetle +#@DESCRIPTION: Machine configuration for v2m-beetle , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_v2m-beetle = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: v2m_beetle + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "v2m_beetle" + diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf b/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf new file mode 100755 index 0000000..202f732 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: v2m-musca-b1-ns +#@DESCRIPTION: Machine configuration for v2m-musca-b1-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_v2m-musca-b1-ns = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: v2m_musca_b1_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "v2m_musca_b1_ns" + diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf b/meta- zephyr-bsp/conf/machine/v2m-musca-b1.conf new file mode 100755 index 0000000..50de472 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: v2m-musca-b1 +#@DESCRIPTION: Machine configuration for v2m-musca-b1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_v2m-musca-b1 = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: v2m_musca_b1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "v2m_musca_b1" + diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf b/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf new file mode 100755 index 0000000..fe21fbe --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: v2m-musca-s1-ns +#@DESCRIPTION: Machine configuration for v2m-musca-s1-ns , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_v2m-musca-s1-ns = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: v2m_musca_s1_ns + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "v2m_musca_s1_ns" + diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf b/meta- zephyr-bsp/conf/machine/v2m-musca-s1.conf new file mode 100755 index 0000000..f935ec7 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: v2m-musca-s1 +#@DESCRIPTION: Machine configuration for v2m-musca-s1 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_v2m-musca-s1 = "arm" + +DEFAULTUNE ?= "armv8m-main" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m33+nodsp +# ARCH: arm +# BOARD: v2m_musca_s1 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "v2m_musca_s1" + diff --git a/meta-zephyr-bsp/conf/machine/warp7-m4.conf b/meta- zephyr-bsp/conf/machine/warp7-m4.conf new file mode 100755 index 0000000..acd00ad --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/warp7-m4.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: warp7-m4 +#@DESCRIPTION: Machine configuration for warp7-m4 , build: zephyr- v2.7.1 +# +# This file is autogenerated. + +ARCH_warp7-m4 = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: warp7_m4 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START" + +ZEPHYR_BOARD = "warp7_m4" + diff --git a/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf b/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf new file mode 100755 index 0000000..ac0f14f --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: waveshare-open103z +#@DESCRIPTION: Machine configuration for waveshare-open103z , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_waveshare-open103z = "arm" + +DEFAULTUNE ?= "cortexm3" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m3 +# ARCH: arm +# BOARD: waveshare_open103z + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DSTM32F103xE -DUSE_HAL_DRIVER - DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000" + +ZEPHYR_BOARD = "waveshare_open103z" + diff --git a/meta-zephyr-bsp/conf/machine/xenvm.conf b/meta-zephyr- bsp/conf/machine/xenvm.conf new file mode 100755 index 0000000..5d0fa54 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/xenvm.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: xenvm +#@DESCRIPTION: Machine configuration for xenvm , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_xenvm = "arm64" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- a72 +# ARCH: arm64 +# BOARD: xenvm + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "xenvm" + diff --git a/meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf b/meta- zephyr-bsp/conf/machine/xmc45-relax-kit.conf new file mode 100755 index 0000000..e50a11e --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: xmc45-relax-kit +#@DESCRIPTION: Machine configuration for xmc45-relax-kit , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_xmc45-relax-kit = "arm" + +DEFAULTUNE ?= "cortexm4" + +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex- m4 +# ARCH: arm +# BOARD: xmc45_relax_kit + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 - D__PROGRAM_START -DXMC4500_F100x1024 -DCORE_CM4" + +ZEPHYR_BOARD = "xmc45_relax_kit" + diff --git a/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf b/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf new file mode 100755 index 0000000..f76b983 --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: xt-sim-intel-s1000 +#@DESCRIPTION: Machine configuration for xt-sim-intel-s1000 , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_xt-sim-intel-s1000 = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: xt-sim_intel_s1000 + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "xt-sim_intel_s1000" + diff --git a/meta-zephyr-bsp/conf/machine/xt-sim.conf b/meta-zephyr- bsp/conf/machine/xt-sim.conf new file mode 100755 index 0000000..a782a1d --- /dev/null +++ b/meta-zephyr-bsp/conf/machine/xt-sim.conf @@ -0,0 +1,22 @@ +#@TYPE: Machine +#@NAME: xt-sim +#@DESCRIPTION: Machine configuration for xt-sim , build: zephyr-v2.7.1 +# +# This file is autogenerated. + +ARCH_xt-sim = "xtensa" + + + +# We were unable to find a tuning for this board. # GCC_M_CPU: +# ARCH: xtensa +# BOARD: xt-sim + + +# MACHINE_OVERRIDES based on default kconfig in zephyr + + +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 - D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1" + +ZEPHYR_BOARD = "xt-sim" + -- 2.25.1
More All Messages By This Member

1581 - 1600 of 57347

Home Hashtags Subgroups Terms