Date   

Re: python3-smbus no longer builds - Does anyone have an idea?

Konrad Weihmann <kweihmann@...>
 

On 28.02.22 13:56, Matthias Klein wrote:
Hello Konrad,
Thanks for the quick feedback.
Have you been able to build the package with the change?
I get a similar error with it:
Dang - that's the second issue being open in this series...

ERROR: smbus-4.3-*.whl is not a valid wheel filename.
Try

PYPA_WHEEL = "${PIP_INSTALL_DIST_PATH}/smbus-*-*.whl"

instead - and it should really work

Best reagrds,
Matthias
-----Ursprüngliche Nachricht-----
Von: Konrad Weihmann <kweihmann@...>
Gesendet: Montag, 28. Februar 2022 13:51
An: Matthias Klein <matthias.klein@...>; yocto@...
Betreff: Re: [yocto] python3-smbus no longer builds - Does anyone have an idea?
Hi Matthias,
this is cause by merged PEP-517 changes.
To make it build again just inject
PIP_INSTALL_PACKAGE = "smbus"
into the recipe or a bbappend.
Mainly the python3-prefix of the recipe, makes the name guessing fail, I suspect patches to be incoming soon
BR
Konrad
On 28.02.22 13:45, Matthias Klein wrote:
Hello,

the python3-smbus package no longer builds.

The install step ends with the following error message:

ERROR: python3_smbus-4.3-*.whl is not a valid wheel filename.

Does anyone have an idea what is the cause?

Many greetings,

Matthias




Re: python3-smbus no longer builds - Does anyone have an idea?

Matthias Klein
 

Hello Konrad,

Thanks for the quick feedback.

Have you been able to build the package with the change?
I get a similar error with it:

ERROR: smbus-4.3-*.whl is not a valid wheel filename.

Best reagrds,
Matthias

-----Ursprüngliche Nachricht-----
Von: Konrad Weihmann <kweihmann@...>
Gesendet: Montag, 28. Februar 2022 13:51
An: Matthias Klein <matthias.klein@...>; yocto@...
Betreff: Re: [yocto] python3-smbus no longer builds - Does anyone have an idea?

Hi Matthias,

this is cause by merged PEP-517 changes.
To make it build again just inject

PIP_INSTALL_PACKAGE = "smbus"

into the recipe or a bbappend.
Mainly the python3-prefix of the recipe, makes the name guessing fail, I suspect patches to be incoming soon

BR
Konrad

On 28.02.22 13:45, Matthias Klein wrote:
Hello,

the python3-smbus package no longer builds.

The install step ends with the following error message:

ERROR: python3_smbus-4.3-*.whl is not a valid wheel filename.

Does anyone have an idea what is the cause?

Many greetings,

Matthias





Re: python3-smbus no longer builds - Does anyone have an idea?

Konrad Weihmann <kweihmann@...>
 

Hi Matthias,

this is cause by merged PEP-517 changes.
To make it build again just inject

PIP_INSTALL_PACKAGE = "smbus"

into the recipe or a bbappend.
Mainly the python3-prefix of the recipe, makes the name guessing fail, I suspect patches to be incoming soon

BR
Konrad

On 28.02.22 13:45, Matthias Klein wrote:
Hello,
the python3-smbus package no longer builds.
The install step ends with the following error message:
ERROR: python3_smbus-4.3-*.whl is not a valid wheel filename.
Does anyone have an idea what is the cause?
Many greetings,
Matthias


python3-smbus no longer builds - Does anyone have an idea?

Matthias Klein
 

Hello,

 

the python3-smbus package no longer builds.

 

The install step ends with the following error message:

ERROR: python3_smbus-4.3-*.whl is not a valid wheel filename.

 

Does anyone have an idea what is the cause?

 

Many greetings,

Matthias

 


Re: Correspondance between Qt5 components and meta-qt5 recipes

Michael Ho
 

Hi Perceval,

Just a rough guess, I think you want qtsvg in DEPENDS for svg support and/or
qtbase in DEPENDS for gif support. I don't know of any mapping but the recipes
seem to align quite clearly with the components. And I think you can ignore setting
RDEPENDS manually.

Typically the RDEPENDS do not need to be done manually and it is handled
auto-magically [1]. When the packaging is done, the task scans the elf headers to
find what libraries are depended on. i.e. It'll see if your app depends on the
qtsvg lib. From there, it determines automatically which package provides that
lib and adds it to the rdeps of the package data. Adding to RDEPENDS manually
is normally only needed if you have something the scanner cannot pick up on
automatically. (eg. shell scripts that have dependencies, dynamically injected
libs, etc).

Been awhile since I did anything with qt5, pretty sure the libs are linked in a
normal sense that the scanner will detect the rdepends automatically.


Kind regards,
Michael


On Sun, Feb 27, 2022 at 3:38 PM Perceval <perceval.arenou@...> wrote:
Hello everyone,

I don't know if it is the right place or if my question belong more in the 
  • openembedded-architecture mailing list.
 

I'm trying to build an image with my Qt5 based application. I know which Qt5 component I need to build and to run my application but I'm struggeling to understand what are the corresponding recipes to put in DEPENDS and RDEPENDS according to the components I use.

For example: if I want to build a graphical application with image display support I would need (if I understand correctly):
for svg support: qtsvg in RDEPENDS 
but for gif support: qtbase in DEPENDS with  PACKAGECONFIG_append = "gif" in a qtbase_%.bbappend
It is a little bit confusing for me. 

My question is:
Is there any documentation or table mapping Qt5 components or libraries and the corresponding recipe in the meta-Qt5 layer (with the correct PACKAGEGROUP to set if needed)?

Thank you very much,
Have a great day,

--
Perceval ARENOU
Embedded Software Engineer





Re: extract several source tree with devtool

Alexander Kanavin
 

You probably need to fix devtool as it is not designed to handle this,
patches welcome.

Alex

On Mon, 28 Feb 2022 at 09:11, Julien STEPHAN <jstephan@...> wrote:

Hi all,

Any ideas?

Thanks
Julien

Le lun. 21 févr. 2022 à 18:24, Julien STEPHAN via lists.yoctoproject.org <jstephan=baylibre.com@...> a écrit :

Hi all,

I am wondering if it is possible to extract both a git repo and a tarball using devtool modify?
Example:
I am trying to use devtool modify on tensorflow-lite recipe (https://git.yoctoproject.org/meta-tensorflow/tree/recipes-framework/tensorflow/tensorflow_2.6.1.bb). The `tensorflow.inc` file fetches the tensorflow repository using git, then `tensorflow_2.6.1.bb` fetches 2 tarballs. The tarballs are extracted inside WORKDIR then files are installed inside the do_install() function. This is running correctly using `bitbake tensorflow`. When using `devtool modify tensorflow`, the tarballs are not extracted, then I get an error at the do_install stage: files from tarball don't exist.

This is a general question not related to tensorflow. Any suggestions on how to handle this? Either on the recipe side or on the devtool side?
Best
Julien




Re: extract several source tree with devtool

Julien STEPHAN
 

Hi all,

Any ideas?

Thanks
Julien


Le lun. 21 févr. 2022 à 18:24, Julien STEPHAN via lists.yoctoproject.org <jstephan=baylibre.com@...> a écrit :
Hi all,

I am wondering if it is possible to extract both a git repo and a tarball using devtool modify?
Example:
I am trying to use devtool modify on tensorflow-lite recipe (https://git.yoctoproject.org/meta-tensorflow/tree/recipes-framework/tensorflow/tensorflow_2.6.1.bb). The `tensorflow.inc` file fetches the tensorflow repository using git, then `tensorflow_2.6.1.bb` fetches 2 tarballs. The tarballs are extracted inside WORKDIR then files are installed inside the do_install() function.  This is running correctly using `bitbake tensorflow`. When using `devtool modify tensorflow`, the tarballs are not extracted, then I get an error at the do_install stage: files from tarball don't exist.

This is a general question not related to tensorflow. Any suggestions on how to handle this? Either on the recipe side or on the devtool side?
Best
Julien




Re: [yocto-infrastructure] [yocto] Service outage beginning Saturday Feb. 26th 1700 UTC

Michael Halstead
 

All of the autobuilder workers are now back online and building. 

The move is nearly complete. All machines except 1 survived despite some minor cosmetic damage. Only access.yocto.io was lost in the move and I will rebuild it tomorrow.






On Sun, Feb 27, 2022 at 6:13 PM akuster808 <akuster808@...> wrote:
Thanks Micheal.

Hope you can enjoy the rest of your weekend.

- Armin

On 2/26/22 22:08, Michael Halstead wrote:
> These services are now available.
>
> downloads.yoctoproject.org <http://downloads.yoctoproject.org>
> sstate.yoctoproject.org <http://sstate.yoctoproject.org>
>
> Restoring sources.openembedded.org <http://sources.openembedded.org>
> is in process and it will be available shortly.
>
> Autobuilder workers will be available tomorrow.
>
>
> On Sat, Feb 26, 2022 at 5:40 PM Michael Halstead via
> lists.yoctoproject.org <http://lists.yoctoproject.org>
> <mhalstead=linuxfoundation.org@...> wrote:
>
>     These services are restored:
>
>     bugzilla.yoctoproject.org <http://bugzilla.yoctoproject.org>
>     IRC Logging
>     openembedded.org <http://openembedded.org>
>     wiki.yoctoproject.org <http://wiki.yoctoproject.org>
>
>     The move continues.
>
>     On Tue, Feb 22, 2022 at 5:02 PM Michael Halstead via
>     lists.yoctoproject.org <http://lists.yoctoproject.org>
>     <mhalstead=linuxfoundation.org@...> wrote:
>
>         We are moving several racks of servers to a new data center in
>         order to save on costs and reduce maintenance overhead.
>
>         Beginning Sat Feb 26 17:00 UTC 2022 / (9am PST)
>         Ending before Sun Feb 27 06:00 UTC 2022 / (10pm PST)
>
>         The following services will experience downtime during much of
>         the outage window:
>
>         Yocto Project Autobuilder (workers only)
>         downloads.yoctoproject.org <http://downloads.yoctoproject.org>
>         sstate.yoctoproject.org <http://sstate.yoctoproject.org>
>         sources.openembedded.org <http://sources.openembedded.org>
>
>         These services will also be offline for a shorter period of
>         time during the window:
>
>         bugzilla.yoctoproject.org <http://bugzilla.yoctoproject.org>
>         IRC Logging
>         openembedded.org <http://openembedded.org>
>         wiki.yoctoproject.org <http://wiki.yoctoproject.org>
>
>         Because many of our services are interdependent there may be
>         unexpected issues with other services during the move.
>
>
>         --
>         Michael Halstead
>         Linux Foundation / Yocto Project
>         Systems Operations Engineer
>
>
>
>
>
>     --
>     Michael Halstead
>     Linux Foundation / Yocto Project
>     Systems Operations Engineer
>
>
>
>
>
> --
> Michael Halstead
> Linux Foundation / Yocto Project
> Systems Operations Engineer
>
>
>



--
Michael Halstead
Linux Foundation / Yocto Project
Systems Operations Engineer


Re: Building Yocto images for RPi CM4

Khem Raj
 



On Sun, Feb 27, 2022 at 3:42 AM Sourabh Hegde <hrsourabh011@...> wrote:

Hello Khem,

I got my hands on Raspberry Pi Compute Module 4 IO Board and also I could access serial console now. Below is the log message I got while booting:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.78-v8 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Tue Feb 22 15:19:24 UTC 2022
[    0.000000] random: fast init done
[    0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000] percpu: Embedded 32 pages/cpu s92312 r8192 d30568 u131072
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 238896
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:49:E3:A0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 663720K/970752K available (12416K kernel code, 1992K rwdata, 4440K rodata, 3968K init, 1267K bss, 44888K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 39462 entries in 155 pages
[    0.000000] ftrace: allocated 155 pages with 5 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] random: get_random_bytes called from start_kernel+0x3b4/0x574 with crng_init=1
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000246] Console: colour dummy device 80x25
[    0.000305] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000334] pid_max: default: 32768 minimum: 301
[    0.000480] LSM: Security Framework initializing
[    0.000658] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.000688] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.001948] cgroup: Disabling memory control group subsystem
[    0.004198] rcu: Hierarchical SRCU implementation.
[    0.005174] EFI services will not be available.
[    0.005670] smp: Bringing up secondary CPUs ...
[    0.006642] Detected PIPT I-cache on CPU1
[    0.006713] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.007803] Detected PIPT I-cache on CPU2
[    0.007850] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.008988] Detected PIPT I-cache on CPU3
[    0.009034] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.009215] smp: Brought up 1 node, 4 CPUs
[    0.009260] SMP: Total of 4 processors activated.
[    0.009277] CPU features: detected: 32-bit EL0 Support
[    0.009294] CPU features: detected: CRC32 instructions
[    0.009311] CPU features: detected: 32-bit EL1 Support
[    0.044411] CPU: All CPU(s) started at EL2
[    0.044481] alternatives: patching kernel code
[    0.045650] devtmpfs: initialized
[    0.055650] Enabled cp15_barrier support
[    0.055694] Enabled setend support
[    0.056029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.056097] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.063289] pinctrl core: initialized pinctrl subsystem
[    0.064024] DMI not present or invalid.
[    0.064444] NET: Registered protocol family 16
[    0.067843] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.068456] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.069414] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.069523] audit: initializing netlink subsys (disabled)
[    0.069799] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
[    0.070316] thermal_sys: Registered thermal governor 'step_wise'
[    0.070532] cpuidle: using governor menu
[    0.070728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.070927] ASID allocator initialised with 65536 entries
[    0.071060] Serial: AMBA PL011 UART driver
[    0.110080] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.116379] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-09-30T19:21:03, variant start
[    0.120394] raspberrypi-firmware soc:firmware: Firmware hash is 51215b4f6e3966401ecd99652a35cf1c25069113
[    0.153635] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.157672] vgaarb: loaded
[    0.158083] SCSI subsystem initialized
[    0.158307] usbcore: registered new interface driver usbfs
[    0.158363] usbcore: registered new interface driver hub
[    0.158429] usbcore: registered new device driver usb
[    0.158788] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.159737] Advanced Linux Sound Architecture Driver Initialized.
[    0.160822] clocksource: Switched to clocksource arch_sys_counter
[    1.180587] VFS: Disk quotas dquot_6.6.0
[    1.180699] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.180878] FS-Cache: Loaded
[    1.181104] CacheFiles: Loaded
[    1.191916] NET: Registered protocol family 2
[    1.192151] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.193473] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    1.193507] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.193668] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.193793] TCP: Hash tables configured (established 8192 bind 8192)
[    1.193995] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.194028] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.194293] NET: Registered protocol family 1
[    1.195120] RPC: Registered named UNIX socket transport module.
[    1.195137] RPC: Registered udp transport module.
[    1.195152] RPC: Registered tcp transport module.
[    1.195166] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.195189] PCI: CLS 0 bytes, default 64
[    1.197342] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.197623] kvm [1]: IPA Size Limit: 44 bits
[    1.198801] kvm [1]: vgic interrupt IRQ9
[    1.199075] kvm [1]: Hyp mode initialized successfully
[    1.201677] Initialise system trusted keyrings
[    1.202005] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    1.208121] zbud: loaded
[    1.209754] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.210008] FS-Cache: Netfs 'nfs' registered for caching
[    1.210671] NFS: Registering the id_resolver key type
[    1.210716] Key type id_resolver registered
[    1.210732] Key type id_legacy registered
[    1.210855] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.210872] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.211950] Key type asymmetric registered
[    1.211969] Asymmetric key parser 'x509' registered
[    1.212019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.212271] io scheduler mq-deadline registered
[    1.212289] io scheduler kyber registered
[    1.216591] gpio-507 (ant1): hogged as output/high
[    1.217956] gpio-511 (ant2): hogged as output/low
[    1.219110] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.219142] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.219215] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.219295] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x003fffffff -> 0x0400000000
[    1.536845] brcm-pcie fd500000.pcie: link down
[    1.542588] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.543460] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.545765] iproc-rng200 fe104000.rng: hwrng registered
[    1.546149] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.547472] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.557763] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    1.558622] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.569652] brd: module loaded
[    1.581572] loop: module loaded
[    1.583327] Loading iSCSI transport class v2.0-870.
[    1.586751] libphy: Fixed MDIO Bus: probed
[    1.588364] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.600865] libphy: bcmgenet MII bus: probed
[    1.648957] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.650027] usbcore: registered new interface driver r8152
[    1.650094] usbcore: registered new interface driver lan78xx
[    1.650149] usbcore: registered new interface driver smsc95xx
[    1.650714] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.651548] usbcore: registered new interface driver uas
[    1.651609] usbcore: registered new interface driver usb-storage
[    1.651837] mousedev: PS/2 mouse device common for all mice
[    1.651886] i2c /dev entries driver
[    1.652742] Driver for 1-wire Dallas network protocol.
[    1.655022] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.658246] sdhci: Secure Digital Host Controller Interface driver
[    1.658264] sdhci: Copyright(c) Pierre Ossman
[    1.659020] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.661482] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.664363] ledtrig-cpu: registered to indicate activity on CPUs
[    1.664701] hid: raw HID events driver (C) Jiri Kosina
[    1.664947] usbcore: registered new interface driver usbhid
[    1.664963] usbhid: USB HID core driver
[    1.665261] ashmem: initialized
[    1.674480] Initializing XFRM netlink socket
[    1.674534] NET: Registered protocol family 17
[    1.674650] Key type dns_resolver registered
[    1.675067] registered taskstats version 1
[    1.675096] Loading compiled-in X.509 certificates
[    1.675717] Key type ._fscrypt registered
[    1.675736] Key type .fscrypt registered
[    1.675751] Key type fscrypt-provisioning registered
[    1.686689] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.686966] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.687068] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
[    1.693178] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.693806] printk: console [ttyS0] disabled
[    1.693923] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 24, base_baud = 62500000) is a 16550
[    2.811548] printk: console [ttyS0] enabled
[    2.820987] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    2.827771] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.837670] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.843863] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    2.880304] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    2.891380] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    2.900692] of_cfs_init
[    2.903346] of_cfs_init: OK
[    2.906233] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.913529] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.914316] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    2.920774] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.927726] ALSA device list:
[    2.931646] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    2.934870] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.934914]   No soundcards found.
[    2.942397] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.956053] Waiting for root device /dev/mmcblk0p2...
[    3.019902] mmc1: new high speed SDIO card at address 0001
[    3.027907] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[    3.035470] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[    3.046464]  mmcblk0: p1 p2
[    3.055549] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    3.083634] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.092049] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.102781] devtmpfs: mounted
[    3.113385] Freeing unused kernel memory: 3968K
[    3.118193] Run /sbin/init as init process
[    3.327246] systemd[1]: System time before build time, advancing clock.
[    3.408332] NET: Registered protocol family 10
[    3.414333] Segment Routing with IPv6
[    3.456287] systemd[1]: systemd 249.7+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[    3.487567] systemd[1]: Detected architecture arm64.

Welcome to OpenEmbedded nodistro.0!

[    3.540979] systemd[1]: Hostname set to <raspberrypi4-64>.
[    3.552504] random: systemd: uninitialized urandom read (16 bytes read)
[    3.559368] systemd[1]: Initializing machine ID from random generator.
[    3.566376] systemd[1]: Installed transient /etc/machine-id file.
[    3.640033] systemd-fstab-generator[107]: Failed to create unit file /run/systemd/generator/boot.mount, as it already exists. Duplicate entry in /etc/fstab?
[    3.699053] systemd[105]: /lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[    4.074995] systemd[1]: Queued start job for default target Multi-User System.
[    4.083709] random: systemd: uninitialized urandom read (16 bytes read)
[    4.137482] systemd[1]: Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/getty.
[    4.161062] random: systemd: uninitialized urandom read (16 bytes read)
[    4.169819] systemd[1]: Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/modprobe.
[    4.194908] systemd[1]: Created slice Slice /system/serial-getty.
[  OK  ] Created slice Slice /system/serial-getty.
[    4.218857] systemd[1]: Created slice Slice /system/wpa_supplicant-nl80211.
[  OK  ] Created slice Slice /system/wpa_supplicant-nl80211.
[    4.246570] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    4.269477] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    4.297403] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[    4.325329] systemd[1]: Reached target Path Units.
[  OK  ] Reached target Path Units.
[    4.345071] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    4.365050] systemd[1]: Reached target Slice Units.
[  OK  ] Reached target Slice Units.
[    4.385058] systemd[1]: Reached target Swaps.
[  OK  ] Reached target Swaps.
[    4.433090] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[    4.457275] systemd[1]: Reached target RPC Port Mapper.
[  OK  ] Reached target RPC Port Mapper.
[    4.477987] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    4.497387] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[    4.522088] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    4.545647] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    4.569877] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    4.589940] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    4.613846] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    4.637603] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    4.661623] systemd[1]: Listening on User Database Manager Socket.
[  OK  ] Listening on User Database Manager Socket.
[    4.685838] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.698792] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    4.725788] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    4.757718] systemd[1]: Mounting Kernel Trace File System...
         Mounting Kernel Trace File System...
[    4.789511] systemd[1]: Mounting Temporary Directory /tmp...
         Mounting Temporary Directory /tmp...
[    4.814515] systemd[1]: Starting Create List of Static Device Nodes...
         Starting Create List of Static Device Nodes...
[    4.841861] systemd[1]: Starting Load Kernel Module configfs...
         Starting Load Kernel Module configfs...
[    4.869773] systemd[1]: Starting Load Kernel Module drm...
         Starting Load Kernel Module drm...
[    4.893853] systemd[1]: Starting Load Kernel Module fuse...
         Starting Load Kernel Module fuse...
[    4.920607] fuse: init (API version 7.32)
[    4.922212] systemd[1]: Starting Start psplash boot splash screen...
         Starting Start psplash boot splash screen...
[    4.954277] systemd[1]: Starting RPC Bind...
         Starting RPC Bind...
[    4.978095] systemd[1]: Starting File System Check on Root Device...
         Starting File System Check on Root Device...
[    5.009819] systemd[1]: Starting Journal Service...
         Starting Journal Service..[    5.018672] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
.
[    5.033667] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    5.045884] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[    5.065621] systemd[1]: Started RPC Bind.
[  OK      5.070888] systemd[1]: Mounted POSIX Message Queue File System.
0m] Started     5.078603] systemd[1]: Mounted Kernel Debug File System.
1;39mRPC Bind.
[    5.085789] systemd[1]: Mounted Kernel Trace File System.
;32m  OK  ] Mounted [    5.093484] systemd[1]: Mounted Temporary Directory /tmp.
POSIX Message Queue File System.
[[    5.103087] systemd[1]: Finished Create List of Static Device Nodes.
  OK  ] Mounted     5.112765] systemd[1]: modprobe@...: Deactivated successfully.
;39mKernel Debug File System[    5.122750] systemd[1]: Finished Load Kernel Module configfs.
.
[  OK  ] Mounted  systemd[1]: modprobe@...: Deactivated successfully.
[0;1;39mKernel Trace File System[    5.141000] systemd[1]: Finished Load Kernel Module drm.
.
[  OK  ] Mount[    5.149229] systemd[1]: modprobe@...: Deactivated successfully.
ed Temporary Directory [    5.158928] systemd[1]: Finished Load Kernel Module fuse.
/tmp.
[  OK [    5.166274] systemd[1]: psplash-start.service: Main process exited, code=exited, status=255/EXCEPTION
 ] Finished [    5.177531] systemd[1]: psplash-start.service: Failed with result 'exit-code'.
Create List of Static Device No[    5.188088] systemd[1]: Failed to start Start psplash boot splash screen.
des.
[    5.196215] systemd[1]: Dependency failed for Start psplash-systemd progress communication helper.
2m  OK  [    5.206502] systemd[1]: psplash-systemd.service: Job psplash-systemd.service/start failed with result 'dependency'.
] Finished Load Kernel Module confi[    5.220887] systemd[1]: Finished Apply Kernel Variables.
gfs.
[  OK  ] Finished Load Kernel Module drm.
[  O[    5.234289] systemd[1]: Mounting FUSE Control File System...
K  ] Finished Load Kernel Module fuse.
[FAILE[    5.246549] systemd[1]: Mounting Kernel Configuration File System...
D] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[  OK  ] Finished Apply Kernel Variables.
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
[    5.313974] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Finished File System Check on Root Device.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
         Starting Remount Root and Kernel File Systems...
[    5.445206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[  OK  ] Finished Remount Root and Kernel File Systems.
         Starting Flush Journal to Persistent Storage...
         Starting Create System[    5.510241] systemd-journald[135]: Received client request to flush runtime journal.
 Users...
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Coldplug All udev Devices.
[  OK  ] Finished Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Preparation for Local File Systems.
         Mounting /var/volatile...
[    5.802376] audit: type=1334 audit(1636549114.475:2): prog-id=5 op=LOAD
[    5.809177] audit: type=1334 audit(1636549114.475:3): prog-id=6 op=LOAD
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Mounted /var/volatile.
         Starting Load/Save Random Seed...
[  OK  ] Started Rule-based Manager for Device Events and Files.
         Starting Network Configuration...
[    6.215697] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.261009] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    6.294000] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.305014] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    6.330846] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.332704] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    6.353703] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.369615] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[  OK  ] Found device[    6.387710] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
     6.393632] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
9m/dev/mmcblk0p1.
[    6.412765] mc: Linux media interface: v0.10
         Mounting /boot...
[  OK  ] Star[    6.431869] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
ted     6.433163] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
1;39mNetwork Configuration.
[    6.451339] bcmgenet fd580000.ethernet eth0: Link is Down
[    6.457389] [vc_sm_connected_init]: start
         Starting Wait for Network to be Configured...
[    6.477747] [vc_sm_connected_init]: installed successfully
[    6.489525] videodev: Linux video capture interface: v2.00
[    6.496669] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.520255] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[    6.533854] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[    6.541493] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[    6.549647] Registered IR keymap rc-cec
[    6.553818] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    6.560663] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[    6.572121] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
[    6.580187] Registered IR keymap rc-cec
[    6.584380] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[    6.591386] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[    6.601904] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
[    6.608378] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
[    6.614805] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
[    6.618789] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.621627] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.621735] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
[    6.621970] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
[    6.622135] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
[    6.622343] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
[    6.643063] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[    6.675594] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[    6.687116] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    6.694354] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.701781] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[  OK  ] Mounted /boot.
[    6.722939] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    6.730296] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    6.738697] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    6.745908] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    6.754675] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    6.765508] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    6.776093] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    6.777884] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    6.792915] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    6.798548] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    6.802966] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[    6.810763] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[  OK      6.822995] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
0m] Reac[    6.823542] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
hed targ[    6.830924] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
et     6.841425] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
;39mLoca[    6.852471] cfg80211: Loading compiled-in X.509 certificates for regulatory database
l File S[    6.853759] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
ystems.
[    6.873712] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
         Starting Rebuild Dynamic Linker Cache...
[    6.895219] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Create Volatile Files and Directories.
[    6.995252] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.007862] usbcore: registered new interface driver brcmfmac
         Starting Rebuild Journal Catalog...
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Finished Rebuild Journal Catalog.
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
[    7.290634] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.312992] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[  OK  ] Finished Rebuild Dynamic Linker Cache.
         Starting Update is Completed...
[    7.355203] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[  OK  ] Finished Update is Completed.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
         Starting Start psplash boot splash screen...
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
         Starting Start psplash boot splash screen...
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Network Name Resolution.
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
[    7.821285] random: crng init done
[    7.824757] random: 7 urandom warning(s) missed due to ratelimiting
[    7.828150] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Boot Completion Check.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target Timer Units.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on dropbear.socket.
[  OK  ] Reached target Socket Units.
[  OK  ] Reached target Basic System.
         Starting Save/Restore Sound Card State...
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started Kernel Logging Service.
[  OK  ] Started System Logging Service.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started A minimalistic net…Pv4, rdisc and DHCPv6 support.
         Starting Configure Bluetooth Modems connected by UART...
         Starting Telephony service...
[    8.291553] 8021q: 802.1Q VLAN Support v1.8
[    8.298806] audit: type=1334 audit(1636549116.971:4): prog-id=7 op=LOAD
[    8.305628] audit: type=1334 audit(1636549116.971:5): prog-id=8 op=LOAD
        [    8.313826] uart-pl011 fe201000.serial: no DMA platform data
 Starting User Login Management...
         Starting Commit a transient machine-id on disk...
[  OK  ] Started WPA supplicant dae…0211 driver-specific version).
         Starting WPA supplicant...
[  OK  ] Finished Save/Restore Sound Card State.
[  OK  ] Started Telephony service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Reached target Sound Card.
[  OK  ] Finished Commit a transient machine-id on disk.
[  OK  ] Started     8.691650] Bluetooth: Core ver 2.22
1;39mWPA[    8.696196] NET: Registered protocol family 31
 supplic[    8.701327] Bluetooth: HCI device and connection manager initialized
ant.[    8.708584] Bluetooth: HCI socket layer initialized

[    8.714452] Bluetooth: L2CAP socket layer initialized
[    8.719796] Bluetooth: SCO socket layer initialized
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
[  OK  ] Finished Permit User Sessions.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started User Login Management.
[   14.115352] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

OpenEmbedded nodistro.0 raspberrypi4-64 ttyS0

raspberrypi4-64 login: [   15.048478] Bluetooth: HCI UART driver ver 2.3
[   15.053073] Bluetooth: HCI UART protocol H4 registered
[   15.058615] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   15.065454] Bluetooth: HCI UART protocol Broadcom registered
[   15.324220] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.329743] Bluetooth: BNEP filters: protocol multicast
[   15.335314] Bluetooth: BNEP socket layer initialized
[   15.355534] NET: Registered protocol family 38
[   15.366165] audit: type=1334 audit(1645960582.023:6): prog-id=9 op=LOAD
[   15.373243] audit: type=1334 audit(1645960582.023:7): prog-id=10 op=LOAD
[   15.447440] Bluetooth: RFCOMM TTY layer initialized
[   15.452487] Bluetooth: RFCOMM socket layer initialized
[   15.457947] Bluetooth: RFCOMM ver 1.11
[   49.149033] audit: type=1334 audit(1645960615.807:8): prog-id=10 op=UNLOAD
[   49.156083] audit: type=1334 audit(1645960615.807:9): prog-id=9 op=UNLOAD


And it's stuck here.

And it is also complaning about

[    3.640033] systemd-fstab-generator[107]: Failed to create unit file /run/systemd/generator/boot.mount, as it already exists. Duplicate entry in /etc/fstab?
[    3.699053] systemd[105]: /lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.


My fstab looks like:

# stock fstab - you probably want to override this with a machine specific one

/dev/root            /                    auto       defaults              1  1
proc                 /proc                proc       defaults              0  0
devpts               /dev/pts             devpts     mode=0620,ptmxmode=0666,gid=5      0  0
tmpfs                /run                 tmpfs      mode=0755,nodev,nosuid,strictatime 0  0
tmpfs                /var/volatile        tmpfs      defaults              0  0

# uncomment this if your device has a SD/MMC/Transflash slot
#/dev/mmcblk0p1       /media/card          auto       defaults,sync,noauto  0  0

/dev/mmcblk0p1  /boot   vfat    defaults        0       0

 

Can you please let me know what could be the issue here and how to resolve it?


You can press bunch of carriage returns and try to login on this series console with the username password you have that will get you further and can check if ssh service is running and network is up or not using ifconfig -a 



Your help will be much appreciated.





Re: [yocto-infrastructure] [yocto] Service outage beginning Saturday Feb. 26th 1700 UTC

Armin Kuster
 

Thanks Micheal.

Hope you can enjoy the rest of your weekend.

- Armin

On 2/26/22 22:08, Michael Halstead wrote:
These services are now available.

downloads.yoctoproject.org <http://downloads.yoctoproject.org>
sstate.yoctoproject.org <http://sstate.yoctoproject.org>

Restoring sources.openembedded.org <http://sources.openembedded.org> is in process and it will be available shortly.

Autobuilder workers will be available tomorrow.


On Sat, Feb 26, 2022 at 5:40 PM Michael Halstead via lists.yoctoproject.org <http://lists.yoctoproject.org> <mhalstead=linuxfoundation.org@...> wrote:

These services are restored:

bugzilla.yoctoproject.org <http://bugzilla.yoctoproject.org>
IRC Logging
openembedded.org <http://openembedded.org>
wiki.yoctoproject.org <http://wiki.yoctoproject.org>

The move continues.

On Tue, Feb 22, 2022 at 5:02 PM Michael Halstead via
lists.yoctoproject.org <http://lists.yoctoproject.org>
<mhalstead=linuxfoundation.org@...> wrote:

We are moving several racks of servers to a new data center in
order to save on costs and reduce maintenance overhead.

Beginning Sat Feb 26 17:00 UTC 2022 / (9am PST)
Ending before Sun Feb 27 06:00 UTC 2022 / (10pm PST)

The following services will experience downtime during much of
the outage window:

Yocto Project Autobuilder (workers only)
downloads.yoctoproject.org <http://downloads.yoctoproject.org>
sstate.yoctoproject.org <http://sstate.yoctoproject.org>
sources.openembedded.org <http://sources.openembedded.org>

These services will also be offline for a shorter period of
time during the window:

bugzilla.yoctoproject.org <http://bugzilla.yoctoproject.org>
IRC Logging
openembedded.org <http://openembedded.org>
wiki.yoctoproject.org <http://wiki.yoctoproject.org>

Because many of our services are interdependent there may be
unexpected issues with other services during the move.


--
Michael Halstead
Linux Foundation / Yocto Project
Systems Operations Engineer





--
Michael Halstead
Linux Foundation / Yocto Project
Systems Operations Engineer





--
Michael Halstead
Linux Foundation / Yocto Project
Systems Operations Engineer


[meta-security][PATCH] tpm2-tss: fix user perms

Armin Kuster
 

[Yocto #14724]

Signed-off-by: Armin Kuster <akuster808@...>
---
meta-tpm/recipes-tpm2/tpm2-tss/tpm2-tss_3.1.0.bb | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/meta-tpm/recipes-tpm2/tpm2-tss/tpm2-tss_3.1.0.bb b/meta-tpm/recipes-tpm2/tpm2-tss/tpm2-tss_3.1.0.bb
index e0f2d09..ddcfb58 100644
--- a/meta-tpm/recipes-tpm2/tpm2-tss/tpm2-tss_3.1.0.bb
+++ b/meta-tpm/recipes-tpm2/tpm2-tss/tpm2-tss_3.1.0.bb
@@ -12,7 +12,7 @@ SRC_URI = "https://github.com/tpm2-software/${BPN}/releases/download/${PV}/${BPN

SRC_URI[sha256sum] = "8900a6603f74310b749b65f23c3461cde6e2a23a5f61058b21004c25f9cf19e8"

-inherit autotools pkgconfig systemd extrausers
+inherit autotools pkgconfig systemd useradd

PACKAGECONFIG ??= ""
PACKAGECONFIG[oxygen] = ",--disable-doxygen-doc, "
@@ -22,10 +22,9 @@ EXTRA_OECONF += "--enable-static --with-udevrulesdir=${nonarch_base_libdir}/udev
EXTRA_OECONF += "--runstatedir=/run"
EXTRA_OECONF:remove = " --disable-static"

-EXTRA_USERS_PARAMS = "\
- useradd -p '' tss; \
- groupadd tss; \
- "
+USERADD_PACKAGES = "${PN}"
+GROUPADD_PARAM:${PN} = "--system tss"
+USERADD_PARAM:${PN} = "--system -M -d /var/lib/tpm -s /bin/false -g tss tss"

do_install:append() {
# Remove /run as it is created on startup
--
2.25.1


[meta-security][PATCH] python3-fail2ban: Migrate to use wheels.

Armin Kuster
 

This package uses 2to3 so need to call build-it ourselves.

Signed-off-by: Armin Kuster <akuster808@...>
---
recipes-security/fail2ban/python3-fail2ban_0.11.2.bb | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/recipes-security/fail2ban/python3-fail2ban_0.11.2.bb b/recipes-security/fail2ban/python3-fail2ban_0.11.2.bb
index f6394cc..93bc3a7 100644
--- a/recipes-security/fail2ban/python3-fail2ban_0.11.2.bb
+++ b/recipes-security/fail2ban/python3-fail2ban_0.11.2.bb
@@ -15,13 +15,17 @@ SRC_URI = " git://github.com/fail2ban/fail2ban.git;branch=0.11;protocol=https \
file://run-ptest \
"

-inherit update-rc.d ptest setuptools3
+inherit update-rc.d ptest setuptools_build_meta
+
+PIP_INSTALL_PACKAGE = "fail2ban"
+PYPA_WHEEL = "${PIP_INSTALL_DIST_PATH}/${PIP_INSTALL_PACKAGE}-${PV}-*.whl"

S = "${WORKDIR}/git"

do_compile () {
cd ${S}
./fail2ban-2to3
+ nativepython3 ${S}/build-it.py
}

do_install:append () {
--
2.25.1


Re: [OE-core] Yocto Project Status WW08`22

Anuj Mittal
 

On Sun, 2022-02-27 at 07:28 -0800, Armin Kuster wrote:
I see there is an April release of Hardknott.  Is that the last
official
Hardknott release from the Yocto Project?
There's going to be a 3.3.6 as well and that is going to be the last.
From this status email:

* YP 3.3.6 build date 2022/03/28
* YP 3.3.6 Release date 2022/04/08

Thanks,

Anuj


-armin

On 2/22/22 07:54, Stephen Jolley wrote:

Current Dev Position: YP 3.5 M4

Next Deadline: 4th April. 2022 YP 3.5 M4 build

Next Team Meetings:

  * Bug Triage meeting Thursday Feb. 24th 7:30 am PDT
   
(https://zoom.us/j/454367603?pwd=ZGxoa2ZXL3FkM3Y0bFd5aVpHVVZ6dz09
   
<https://zoom.us/j/454367603?pwd=ZGxoa2ZXL3FkM3Y0bFd5aVpHVVZ6dz09>)
  * Monthly Project Meeting Tuesday Mar. 1st at 8 am PDT
   
(https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09
   
<https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09>)
    <https://zoom.us/j/990892712>
  * Weekly Engineering Sync Tuesday Feb. 22nd at 8 am PDT
   
(https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09
   
<https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09>)
    <https://zoom.us/j/990892712>
  * Twitch - See https://www.twitch.tv/theyoctojester

Key Status/Updates:

  * We are now at feature freeze for 3.5, our next LTS release
  * YP 3.1.14 and YP 3.2.4 were released
  * YP 3.3.5 is in QA
  * After a last minute push, the base set of inclusive language
    changes have merged. There is a conversion script which can be
run
    to convert layers. Not all changes needed have been written yet
    but enough are present to allow the conversion process to
start.
  * There were also changes to convert LICENSE fields to use SPDX
    identifiers and there is a second conversion script for this
that
    can be used.
  * We have updated the core layer series name to kirkstone and
other
    layers will now need to update to confirm compatibility with
    kirkstone.
  * There is a patchset to update python’s build processes to use
the
    upstream preferred wheel approach which would aid support of
    python over the next few years. It is late in the cycle for
this
    kind of change but we will give this series a few days of
testing
    to make a decision and welcome user feedback either way on
these
    changes.
  * As such, the M3 release build will likely not happen until
early
    next week.
  * The autobuilder infrastructure is planned to be offline 26-28th
    February for a data center move. Public services like the
website,
    wiki and git servers will remain live but the git backend
    (push.yoctoproject.org) will be offline, as will the downloads
and
    sstate services and the autobuilder/NAS.
  * Capacity has been improved on the sstate server which was
causing
    intermittent timeout issues for downloads.
  * Intermittent issues continue to be at record high levels and
help
    is very much welcome in trying to resolve them. You can see the
    list of failures we’re continuing to see by searching for the
    “AB-INT” tag in bugzilla:
   
https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT
   
<https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT>

In particular, we’re struggling to understand the intermittent
network
issue with external hosts we’re seeing very occasionally.

Ways to contribute:

  * There are bugs identified as possible for newcomers to the
    project: https://wiki.yoctoproject.org/wiki/Newcomers
    <https://wiki.yoctoproject.org/wiki/Newcomers>
  * There are bugs that are currently unassigned for YP 3.5. See:
   
https://wiki.yoctoproject.org/wiki/Bug_Triage#Medium.2B_3.5_Unassigned_Enhancements.2FBugs
   
<https://wiki.yoctoproject.org/wiki/Bug_Triage#Medium.2B_3.5_Unassi
gned_Enhancements.2FBugs>
  * We’d welcome new maintainers for recipes in OE-Core. Please see
    the list at:
   
http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/conf/distro/include/maintainers.inc
   
<http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/conf/distro/in
clude/maintainers.inc>
    and discuss with the existing maintainer, or ask on the OE-Core
    mailing list. We will likely move a chunk of these to
“Unassigned”
    soon to help facilitate this.
  * Help us resolve CVE issues: CVE metrics
   
<https://docs.google.com/spreadsheets/d/e/2PACX-1vRgNISmH0Ditf0bRtS
ezeR2XsgKIiSFJKF6KJUHpnzocNGzvKZbuSDKfmV3n64BFXDRqElBSJnhHtG4/pubch
art?oid=1993375488&format=interactive>


YP 3.5 Milestone Dates:

  * YP 3.5 M3 build date 2022/02/21
  * YP 3.5 M3 Release date 2022/03/04
  * YP 3.5 M4 build date 2022/04/04
  * YP 3.5 M4 Release date 2022/04/29

Upcoming dot releases:

  * YP 3.1.14  is released
  * YP 3.4.2 is released
  * YP 3.3.5 is in QA
  * YP 3.3.5 Release date 2022/02/25
  * YP 3.1.15 build date 2022/03/14
  * YP 3.1.15 Release date 2022/03/25
  * YP 3.4.3 build date 2022/03/21
  * YP 3.4.3 Release date 2022/04/01
  * YP 3.3.6 build date 2022/03/28
  * YP 3.3.6 Release date 2022/04/08
  * YP 3.1.16 build date 2022/04/25
  * YP 3.1.16 Release date 2022/05/06

Tracking Metrics:

  * WDD 2652 (last week
    2662)(https://wiki.yoctoproject.org/charts/combo.html
    <https://wiki.yoctoproject.org/charts/combo.html>)
  * OE-Core/Poky Patch Metrics
      o Total patches found: 1202 (last week 1208)
      o Patches in the Pending State: 334 (28%) [last week 334
(28%)]

The Yocto Project’s technical governance is through its Technical
Steering Committee, more information is available at:

https://wiki.yoctoproject.org/wiki/TSC 
<https://wiki.yoctoproject.org/wiki/TSC>

The Status reports are now stored on the wiki at:
https://wiki.yoctoproject.org/wiki/Weekly_Status 
<https://wiki.yoctoproject.org/wiki/Weekly_Status>

[If anyone has suggestions for other information you’d like to see
on
this weekly status update, let us know!]

Thanks,

*/Stephen K. Jolley/**//*

*Yocto Project Program Manager*

(*Cell*: (208) 244-4460

* *Email*:_sjolley.yp.pm@...






Re: [OE-core] Yocto Project Status WW08`22

Armin Kuster
 

I see there is an April release of Hardknott.  Is that the last official Hardknott release from the Yocto Project?

-armin

On 2/22/22 07:54, Stephen Jolley wrote:

Current Dev Position: YP 3.5 M4

Next Deadline: 4th April. 2022 YP 3.5 M4 build

Next Team Meetings:

* Bug Triage meeting Thursday Feb. 24th 7:30 am PDT
(https://zoom.us/j/454367603?pwd=ZGxoa2ZXL3FkM3Y0bFd5aVpHVVZ6dz09
<https://zoom.us/j/454367603?pwd=ZGxoa2ZXL3FkM3Y0bFd5aVpHVVZ6dz09>)
* Monthly Project Meeting Tuesday Mar. 1st at 8 am PDT
(https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09
<https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09>)
<https://zoom.us/j/990892712>
* Weekly Engineering Sync Tuesday Feb. 22nd at 8 am PDT
(https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09
<https://zoom.us/j/990892712?pwd=cHU1MjhoM2x6ck81bkcrYjRrcmJsUT09>)
<https://zoom.us/j/990892712>
* Twitch - See https://www.twitch.tv/theyoctojester

Key Status/Updates:

* We are now at feature freeze for 3.5, our next LTS release
* YP 3.1.14 and YP 3.2.4 were released
* YP 3.3.5 is in QA
* After a last minute push, the base set of inclusive language
changes have merged. There is a conversion script which can be run
to convert layers. Not all changes needed have been written yet
but enough are present to allow the conversion process to start.
* There were also changes to convert LICENSE fields to use SPDX
identifiers and there is a second conversion script for this that
can be used.
* We have updated the core layer series name to kirkstone and other
layers will now need to update to confirm compatibility with
kirkstone.
* There is a patchset to update python’s build processes to use the
upstream preferred wheel approach which would aid support of
python over the next few years. It is late in the cycle for this
kind of change but we will give this series a few days of testing
to make a decision and welcome user feedback either way on these
changes.
* As such, the M3 release build will likely not happen until early
next week.
* The autobuilder infrastructure is planned to be offline 26-28th
February for a data center move. Public services like the website,
wiki and git servers will remain live but the git backend
(push.yoctoproject.org) will be offline, as will the downloads and
sstate services and the autobuilder/NAS.
* Capacity has been improved on the sstate server which was causing
intermittent timeout issues for downloads.
* Intermittent issues continue to be at record high levels and help
is very much welcome in trying to resolve them. You can see the
list of failures we’re continuing to see by searching for the
“AB-INT” tag in bugzilla:
https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT
<https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT>

In particular, we’re struggling to understand the intermittent network issue with external hosts we’re seeing very occasionally.

Ways to contribute:

* There are bugs identified as possible for newcomers to the
project: https://wiki.yoctoproject.org/wiki/Newcomers
<https://wiki.yoctoproject.org/wiki/Newcomers>
* There are bugs that are currently unassigned for YP 3.5. See:
https://wiki.yoctoproject.org/wiki/Bug_Triage#Medium.2B_3.5_Unassigned_Enhancements.2FBugs
<https://wiki.yoctoproject.org/wiki/Bug_Triage#Medium.2B_3.5_Unassigned_Enhancements.2FBugs>
* We’d welcome new maintainers for recipes in OE-Core. Please see
the list at:
http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/conf/distro/include/maintainers.inc
<http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/conf/distro/include/maintainers.inc>
and discuss with the existing maintainer, or ask on the OE-Core
mailing list. We will likely move a chunk of these to “Unassigned”
soon to help facilitate this.
* Help us resolve CVE issues: CVE metrics
<https://docs.google.com/spreadsheets/d/e/2PACX-1vRgNISmH0Ditf0bRtSezeR2XsgKIiSFJKF6KJUHpnzocNGzvKZbuSDKfmV3n64BFXDRqElBSJnhHtG4/pubchart?oid=1993375488&format=interactive>


YP 3.5 Milestone Dates:

* YP 3.5 M3 build date 2022/02/21
* YP 3.5 M3 Release date 2022/03/04
* YP 3.5 M4 build date 2022/04/04
* YP 3.5 M4 Release date 2022/04/29

Upcoming dot releases:

* YP 3.1.14  is released
* YP 3.4.2 is released
* YP 3.3.5 is in QA
* YP 3.3.5 Release date 2022/02/25
* YP 3.1.15 build date 2022/03/14
* YP 3.1.15 Release date 2022/03/25
* YP 3.4.3 build date 2022/03/21
* YP 3.4.3 Release date 2022/04/01
* YP 3.3.6 build date 2022/03/28
* YP 3.3.6 Release date 2022/04/08
* YP 3.1.16 build date 2022/04/25
* YP 3.1.16 Release date 2022/05/06

Tracking Metrics:

* WDD 2652 (last week
2662)(https://wiki.yoctoproject.org/charts/combo.html
<https://wiki.yoctoproject.org/charts/combo.html>)
* OE-Core/Poky Patch Metrics
o Total patches found: 1202 (last week 1208)
o Patches in the Pending State: 334 (28%) [last week 334 (28%)]

The Yocto Project’s technical governance is through its Technical Steering Committee, more information is available at:

https://wiki.yoctoproject.org/wiki/TSC <https://wiki.yoctoproject.org/wiki/TSC>

The Status reports are now stored on the wiki at: https://wiki.yoctoproject.org/wiki/Weekly_Status <https://wiki.yoctoproject.org/wiki/Weekly_Status>

[If anyone has suggestions for other information you’d like to see on this weekly status update, let us know!]

Thanks,

*/Stephen K. Jolley/**//*

*Yocto Project Program Manager*

(*Cell*: (208) 244-4460

* *Email*:_sjolley.yp.pm@...



Correspondance between Qt5 components and meta-qt5 recipes

Perceval
 

Hello everyone,

I don't know if it is the right place or if my question belong more in the 
  • openembedded-architecture mailing list.
  •  

    I'm trying to build an image with my Qt5 based application. I know which Qt5 component I need to build and to run my application but I'm struggeling to understand what are the corresponding recipes to put in DEPENDS and RDEPENDS according to the components I use.

    For example: if I want to build a graphical application with image display support I would need (if I understand correctly):
    for svg support: qtsvg in RDEPENDS 
    but for gif support: qtbase in DEPENDS with  PACKAGECONFIG_append = "gif" in a qtbase_%.bbappend
    It is a little bit confusing for me. 

    My question is:
    Is there any documentation or table mapping Qt5 components or libraries and the corresponding recipe in the meta-Qt5 layer (with the correct PACKAGEGROUP to set if needed)?

    Thank you very much,
    Have a great day,

    --
    Perceval ARENOU
    Embedded Software Engineer


    Re: Building Yocto images for RPi CM4

    Sourabh Hegde
     

    Hello Khem,

    I got my hands on Raspberry Pi Compute Module 4 IO Board and also I could access serial console now. Below is the log message I got while booting:

    [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
    [    0.000000] Linux version 5.10.78-v8 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Tue Feb 22 15:19:24 UTC 2022
    [    0.000000] random: fast init done
    [    0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
    [    0.000000] efi: UEFI not found.
    [    0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
    [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003b3fffff]
    [    0.000000]   DMA32    empty
    [    0.000000]   Normal   empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
    [    0.000000] percpu: Embedded 32 pages/cpu s92312 r8192 d30568 u131072
    [    0.000000] Detected PIPT I-cache on CPU0
    [    0.000000] CPU features: detected: Spectre-v2
    [    0.000000] CPU features: detected: Spectre-v4
    [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
    [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 238896
    [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:49:E3:A0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
    [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
    [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
    [    0.000000] Memory: 663720K/970752K available (12416K kernel code, 1992K rwdata, 4440K rodata, 3968K init, 1267K bss, 44888K reserved, 262144K cma-reserved)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] ftrace: allocating 39462 entries in 155 pages
    [    0.000000] ftrace: allocated 155 pages with 5 groups
    [    0.000000] rcu: Preemptible hierarchical RCU implementation.
    [    0.000000] rcu:     RCU event tracing is enabled.
    [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
    [    0.000000]  Trampoline variant of Tasks RCU enabled.
    [    0.000000]  Rude variant of Tasks RCU enabled.
    [    0.000000]  Tracing variant of Tasks RCU enabled.
    [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
    [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
    [    0.000000] GIC: Using split EOI/Deactivate mode
    [    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
    [    0.000000] random: get_random_bytes called from start_kernel+0x3b4/0x574 with crng_init=1
    [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
    [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
    [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
    [    0.000246] Console: colour dummy device 80x25
    [    0.000305] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
    [    0.000334] pid_max: default: 32768 minimum: 301
    [    0.000480] LSM: Security Framework initializing
    [    0.000658] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
    [    0.000688] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
    [    0.001948] cgroup: Disabling memory control group subsystem
    [    0.004198] rcu: Hierarchical SRCU implementation.
    [    0.005174] EFI services will not be available.
    [    0.005670] smp: Bringing up secondary CPUs ...
    [    0.006642] Detected PIPT I-cache on CPU1
    [    0.006713] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
    [    0.007803] Detected PIPT I-cache on CPU2
    [    0.007850] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
    [    0.008988] Detected PIPT I-cache on CPU3
    [    0.009034] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
    [    0.009215] smp: Brought up 1 node, 4 CPUs
    [    0.009260] SMP: Total of 4 processors activated.
    [    0.009277] CPU features: detected: 32-bit EL0 Support
    [    0.009294] CPU features: detected: CRC32 instructions
    [    0.009311] CPU features: detected: 32-bit EL1 Support
    [    0.044411] CPU: All CPU(s) started at EL2
    [    0.044481] alternatives: patching kernel code
    [    0.045650] devtmpfs: initialized
    [    0.055650] Enabled cp15_barrier support
    [    0.055694] Enabled setend support
    [    0.056029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [    0.056097] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
    [    0.063289] pinctrl core: initialized pinctrl subsystem
    [    0.064024] DMI not present or invalid.
    [    0.064444] NET: Registered protocol family 16
    [    0.067843] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
    [    0.068456] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
    [    0.069414] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
    [    0.069523] audit: initializing netlink subsys (disabled)
    [    0.069799] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
    [    0.070316] thermal_sys: Registered thermal governor 'step_wise'
    [    0.070532] cpuidle: using governor menu
    [    0.070728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
    [    0.070927] ASID allocator initialised with 65536 entries
    [    0.071060] Serial: AMBA PL011 UART driver
    [    0.110080] bcm2835-mbox fe00b880.mailbox: mailbox enabled
    [    0.116379] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-09-30T19:21:03, variant start
    [    0.120394] raspberrypi-firmware soc:firmware: Firmware hash is 51215b4f6e3966401ecd99652a35cf1c25069113
    [    0.153635] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
    [    0.157672] vgaarb: loaded
    [    0.158083] SCSI subsystem initialized
    [    0.158307] usbcore: registered new interface driver usbfs
    [    0.158363] usbcore: registered new interface driver hub
    [    0.158429] usbcore: registered new device driver usb
    [    0.158788] usb_phy_generic phy: supply vcc not found, using dummy regulator
    [    0.159737] Advanced Linux Sound Architecture Driver Initialized.
    [    0.160822] clocksource: Switched to clocksource arch_sys_counter
    [    1.180587] VFS: Disk quotas dquot_6.6.0
    [    1.180699] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.180878] FS-Cache: Loaded
    [    1.181104] CacheFiles: Loaded
    [    1.191916] NET: Registered protocol family 2
    [    1.192151] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
    [    1.193473] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
    [    1.193507] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
    [    1.193668] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
    [    1.193793] TCP: Hash tables configured (established 8192 bind 8192)
    [    1.193995] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
    [    1.194028] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
    [    1.194293] NET: Registered protocol family 1
    [    1.195120] RPC: Registered named UNIX socket transport module.
    [    1.195137] RPC: Registered udp transport module.
    [    1.195152] RPC: Registered tcp transport module.
    [    1.195166] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    1.195189] PCI: CLS 0 bytes, default 64
    [    1.197342] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
    [    1.197623] kvm [1]: IPA Size Limit: 44 bits
    [    1.198801] kvm [1]: vgic interrupt IRQ9
    [    1.199075] kvm [1]: Hyp mode initialized successfully
    [    1.201677] Initialise system trusted keyrings
    [    1.202005] workingset: timestamp_bits=46 max_order=18 bucket_order=0
    [    1.208121] zbud: loaded
    [    1.209754] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    1.210008] FS-Cache: Netfs 'nfs' registered for caching
    [    1.210671] NFS: Registering the id_resolver key type
    [    1.210716] Key type id_resolver registered
    [    1.210732] Key type id_legacy registered
    [    1.210855] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    1.210872] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
    [    1.211950] Key type asymmetric registered
    [    1.211969] Asymmetric key parser 'x509' registered
    [    1.212019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
    [    1.212271] io scheduler mq-deadline registered
    [    1.212289] io scheduler kyber registered
    [    1.216591] gpio-507 (ant1): hogged as output/high
    [    1.217956] gpio-511 (ant2): hogged as output/low
    [    1.219110] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
    [    1.219142] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
    [    1.219215] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
    [    1.219295] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x003fffffff -> 0x0400000000
    [    1.536845] brcm-pcie fd500000.pcie: link down
    [    1.542588] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
    [    1.543460] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
    [    1.545765] iproc-rng200 fe104000.rng: hwrng registered
    [    1.546149] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
    [    1.547472] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
    [    1.557763] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    1.558622] cacheinfo: Unable to detect cache hierarchy for CPU 0
    [    1.569652] brd: module loaded
    [    1.581572] loop: module loaded
    [    1.583327] Loading iSCSI transport class v2.0-870.
    [    1.586751] libphy: Fixed MDIO Bus: probed
    [    1.588364] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
    [    1.600865] libphy: bcmgenet MII bus: probed
    [    1.648957] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
    [    1.650027] usbcore: registered new interface driver r8152
    [    1.650094] usbcore: registered new interface driver lan78xx
    [    1.650149] usbcore: registered new interface driver smsc95xx
    [    1.650714] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
    [    1.651548] usbcore: registered new interface driver uas
    [    1.651609] usbcore: registered new interface driver usb-storage
    [    1.651837] mousedev: PS/2 mouse device common for all mice
    [    1.651886] i2c /dev entries driver
    [    1.652742] Driver for 1-wire Dallas network protocol.
    [    1.655022] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
    [    1.658246] sdhci: Secure Digital Host Controller Interface driver
    [    1.658264] sdhci: Copyright(c) Pierre Ossman
    [    1.659020] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
    [    1.661482] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.664363] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.664701] hid: raw HID events driver (C) Jiri Kosina
    [    1.664947] usbcore: registered new interface driver usbhid
    [    1.664963] usbhid: USB HID core driver
    [    1.665261] ashmem: initialized
    [    1.674480] Initializing XFRM netlink socket
    [    1.674534] NET: Registered protocol family 17
    [    1.674650] Key type dns_resolver registered
    [    1.675067] registered taskstats version 1
    [    1.675096] Loading compiled-in X.509 certificates
    [    1.675717] Key type ._fscrypt registered
    [    1.675736] Key type .fscrypt registered
    [    1.675751] Key type fscrypt-provisioning registered
    [    1.686689] uart-pl011 fe201000.serial: there is not valid maps for state default
    [    1.686966] uart-pl011 fe201000.serial: cts_event_workaround enabled
    [    1.687068] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
    [    1.693178] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
    [    1.693806] printk: console [ttyS0] disabled
    [    1.693923] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 24, base_baud = 62500000) is a 16550
    [    2.811548] printk: console [ttyS0] enabled
    [    2.820987] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    2.827771] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
    [    2.837670] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
    [    2.843863] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
    [    2.880304] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    2.891380] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    2.900692] of_cfs_init
    [    2.903346] of_cfs_init: OK
    [    2.906233] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
    [    2.913529] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [    2.914316] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
    [    2.920774] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [    2.927726] ALSA device list:
    [    2.931646] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    2.934870] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
    [    2.934914]   No soundcards found.
    [    2.942397] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [    2.956053] Waiting for root device /dev/mmcblk0p2...
    [    3.019902] mmc1: new high speed SDIO card at address 0001
    [    3.027907] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
    [    3.035470] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
    [    3.046464]  mmcblk0: p1 p2
    [    3.055549] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    3.083634] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    3.092049] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
    [    3.102781] devtmpfs: mounted
    [    3.113385] Freeing unused kernel memory: 3968K
    [    3.118193] Run /sbin/init as init process
    [    3.327246] systemd[1]: System time before build time, advancing clock.
    [    3.408332] NET: Registered protocol family 10
    [    3.414333] Segment Routing with IPv6
    [    3.456287] systemd[1]: systemd 249.7+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
    [    3.487567] systemd[1]: Detected architecture arm64.

    Welcome to OpenEmbedded nodistro.0!

    [    3.540979] systemd[1]: Hostname set to <raspberrypi4-64>.
    [    3.552504] random: systemd: uninitialized urandom read (16 bytes read)
    [    3.559368] systemd[1]: Initializing machine ID from random generator.
    [    3.566376] systemd[1]: Installed transient /etc/machine-id file.
    [    3.640033] systemd-fstab-generator[107]: Failed to create unit file /run/systemd/generator/boot.mount, as it already exists. Duplicate entry in /etc/fstab?
    [    3.699053] systemd[105]: /lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
    [    4.074995] systemd[1]: Queued start job for default target Multi-User System.
    [    4.083709] random: systemd: uninitialized urandom read (16 bytes read)
    [    4.137482] systemd[1]: Created slice Slice /system/getty.
    [  OK  ] Created slice Slice /system/getty.
    [    4.161062] random: systemd: uninitialized urandom read (16 bytes read)
    [    4.169819] systemd[1]: Created slice Slice /system/modprobe.
    [  OK  ] Created slice Slice /system/modprobe.
    [    4.194908] systemd[1]: Created slice Slice /system/serial-getty.
    [  OK  ] Created slice Slice /system/serial-getty.
    [    4.218857] systemd[1]: Created slice Slice /system/wpa_supplicant-nl80211.
    [  OK  ] Created slice Slice /system/wpa_supplicant-nl80211.
    [    4.246570] systemd[1]: Created slice User and Session Slice.
    [  OK  ] Created slice User and Session Slice.
    [    4.269477] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [  OK  ] Started Dispatch Password …ts to Console Directory Watch.
    [    4.297403] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [  OK  ] Started Forward Password R…uests to Wall Directory Watch.
    [    4.325329] systemd[1]: Reached target Path Units.
    [  OK  ] Reached target Path Units.
    [    4.345071] systemd[1]: Reached target Remote File Systems.
    [  OK  ] Reached target Remote File Systems.
    [    4.365050] systemd[1]: Reached target Slice Units.
    [  OK  ] Reached target Slice Units.
    [    4.385058] systemd[1]: Reached target Swaps.
    [  OK  ] Reached target Swaps.
    [    4.433090] systemd[1]: Listening on RPCbind Server Activation Socket.
    [  OK  ] Listening on RPCbind Server Activation Socket.
    [    4.457275] systemd[1]: Reached target RPC Port Mapper.
    [  OK  ] Reached target RPC Port Mapper.
    [    4.477987] systemd[1]: Listening on Syslog Socket.
    [  OK  ] Listening on Syslog Socket.
    [    4.497387] systemd[1]: Listening on initctl Compatibility Named Pipe.
    [  OK  ] Listening on initctl Compatibility Named Pipe.
    [    4.522088] systemd[1]: Listening on Journal Audit Socket.
    [  OK  ] Listening on Journal Audit Socket.
    [    4.545647] systemd[1]: Listening on Journal Socket (/dev/log).
    [  OK  ] Listening on Journal Socket (/dev/log).
    [    4.569877] systemd[1]: Listening on Journal Socket.
    [  OK  ] Listening on Journal Socket.
    [    4.589940] systemd[1]: Listening on Network Service Netlink Socket.
    [  OK  ] Listening on Network Service Netlink Socket.
    [    4.613846] systemd[1]: Listening on udev Control Socket.
    [  OK  ] Listening on udev Control Socket.
    [    4.637603] systemd[1]: Listening on udev Kernel Socket.
    [  OK  ] Listening on udev Kernel Socket.
    [    4.661623] systemd[1]: Listening on User Database Manager Socket.
    [  OK  ] Listening on User Database Manager Socket.
    [    4.685838] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
    [    4.698792] systemd[1]: Mounting POSIX Message Queue File System...
             Mounting POSIX Message Queue File System...
    [    4.725788] systemd[1]: Mounting Kernel Debug File System...
             Mounting Kernel Debug File System...
    [    4.757718] systemd[1]: Mounting Kernel Trace File System...
             Mounting Kernel Trace File System...
    [    4.789511] systemd[1]: Mounting Temporary Directory /tmp...
             Mounting Temporary Directory /tmp...
    [    4.814515] systemd[1]: Starting Create List of Static Device Nodes...
             Starting Create List of Static Device Nodes...
    [    4.841861] systemd[1]: Starting Load Kernel Module configfs...
             Starting Load Kernel Module configfs...
    [    4.869773] systemd[1]: Starting Load Kernel Module drm...
             Starting Load Kernel Module drm...
    [    4.893853] systemd[1]: Starting Load Kernel Module fuse...
             Starting Load Kernel Module fuse...
    [    4.920607] fuse: init (API version 7.32)
    [    4.922212] systemd[1]: Starting Start psplash boot splash screen...
             Starting Start psplash boot splash screen...
    [    4.954277] systemd[1]: Starting RPC Bind...
             Starting RPC Bind...
    [    4.978095] systemd[1]: Starting File System Check on Root Device...
             Starting File System Check on Root Device...
    [    5.009819] systemd[1]: Starting Journal Service...
             Starting Journal Service..[    5.018672] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
    .
    [    5.033667] systemd[1]: Starting Apply Kernel Variables...
             Starting Apply Kernel Variables...
    [    5.045884] systemd[1]: Starting Coldplug All udev Devices...
             Starting Coldplug All udev Devices...
    [    5.065621] systemd[1]: Started RPC Bind.
    [  OK      5.070888] systemd[1]: Mounted POSIX Message Queue File System.
    0m] Started     5.078603] systemd[1]: Mounted Kernel Debug File System.
    1;39mRPC Bind.
    [    5.085789] systemd[1]: Mounted Kernel Trace File System.
    ;32m  OK  ] Mounted [    5.093484] systemd[1]: Mounted Temporary Directory /tmp.
    POSIX Message Queue File System.
    [[    5.103087] systemd[1]: Finished Create List of Static Device Nodes.
      OK  ] Mounted     5.112765] systemd[1]: modprobe@...: Deactivated successfully.
    ;39mKernel Debug File System[    5.122750] systemd[1]: Finished Load Kernel Module configfs.
    .
    [  OK  ] Mounted  systemd[1]: modprobe@...: Deactivated successfully.
    [0;1;39mKernel Trace File System[    5.141000] systemd[1]: Finished Load Kernel Module drm.
    .
    [  OK  ] Mount[    5.149229] systemd[1]: modprobe@...: Deactivated successfully.
    ed Temporary Directory [    5.158928] systemd[1]: Finished Load Kernel Module fuse.
    /tmp.
    [  OK [    5.166274] systemd[1]: psplash-start.service: Main process exited, code=exited, status=255/EXCEPTION
     ] Finished [    5.177531] systemd[1]: psplash-start.service: Failed with result 'exit-code'.
    Create List of Static Device No[    5.188088] systemd[1]: Failed to start Start psplash boot splash screen.
    des.
    [    5.196215] systemd[1]: Dependency failed for Start psplash-systemd progress communication helper.
    2m  OK  [    5.206502] systemd[1]: psplash-systemd.service: Job psplash-systemd.service/start failed with result 'dependency'.
    ] Finished Load Kernel Module confi[    5.220887] systemd[1]: Finished Apply Kernel Variables.
    gfs.
    [  OK  ] Finished Load Kernel Module drm.
    [  O[    5.234289] systemd[1]: Mounting FUSE Control File System...
    K  ] Finished Load Kernel Module fuse.
    [FAILE[    5.246549] systemd[1]: Mounting Kernel Configuration File System...
    D] Failed to start Start psplash boot splash screen.
    See 'systemctl status psplash-start.service' for details.
    [DEPEND] Dependency failed for Star…progress communication helper.
    [  OK  ] Finished Apply Kernel Variables.
             Mounting FUSE Control File System...
             Mounting Kernel Configuration File System...
    [    5.313974] systemd[1]: Started Journal Service.
    [  OK  ] Started Journal Service.
    [  OK  ] Finished File System Check on Root Device.
    [  OK  ] Mounted FUSE Control File System.
    [  OK  ] Mounted Kernel Configuration File System.
             Starting Remount Root and Kernel File Systems...
    [    5.445206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
    [  OK  ] Finished Remount Root and Kernel File Systems.
             Starting Flush Journal to Persistent Storage...
             Starting Create System[    5.510241] systemd-journald[135]: Received client request to flush runtime journal.
     Users...
    [  OK  ] Finished Flush Journal to Persistent Storage.
    [  OK  ] Finished Coldplug All udev Devices.
    [  OK  ] Finished Create System Users.
             Starting Create Static Device Nodes in /dev...
    [  OK  ] Finished Create Static Device Nodes in /dev.
    [  OK  ] Reached target Preparation for Local File Systems.
             Mounting /var/volatile...
    [    5.802376] audit: type=1334 audit(1636549114.475:2): prog-id=5 op=LOAD
    [    5.809177] audit: type=1334 audit(1636549114.475:3): prog-id=6 op=LOAD
             Starting Rule-based Manage…for Device Events and Files...
    [  OK  ] Mounted /var/volatile.
             Starting Load/Save Random Seed...
    [  OK  ] Started Rule-based Manager for Device Events and Files.
             Starting Network Configuration...
    [    6.215697] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.261009] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
    [    6.294000] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.305014] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
    [    6.330846] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.332704] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
    [    6.353703] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.369615] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
    [  OK  ] Found device[    6.387710] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
         6.393632] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    9m/dev/mmcblk0p1.
    [    6.412765] mc: Linux media interface: v0.10
             Mounting /boot...
    [  OK  ] Star[    6.431869] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
    ted     6.433163] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
    1;39mNetwork Configuration.
    [    6.451339] bcmgenet fd580000.ethernet eth0: Link is Down
    [    6.457389] [vc_sm_connected_init]: start
             Starting Wait for Network to be Configured...
    [    6.477747] [vc_sm_connected_init]: installed successfully
    [    6.489525] videodev: Linux video capture interface: v2.00
    [    6.496669] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.520255] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
    [    6.533854] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
    [    6.541493] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
    [    6.549647] Registered IR keymap rc-cec
    [    6.553818] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
    [    6.560663] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
    [    6.572121] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
    [    6.580187] Registered IR keymap rc-cec
    [    6.584380] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
    [    6.591386] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
    [    6.601904] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
    [    6.608378] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
    [    6.614805] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
    [    6.618789] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
    [    6.621627] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
    [    6.621735] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
    [    6.621970] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
    [    6.622135] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
    [    6.622343] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
    [    6.643063] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
    [    6.675594] vc4-drm gpu: [drm] Cannot find any crtc or sizes
    [    6.687116] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
    [    6.694354] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
    [    6.701781] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
    [  OK  ] Mounted /boot.
    [    6.722939] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
    [    6.730296] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
    [    6.738697] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
    [    6.745908] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
    [    6.754675] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
    [    6.765508] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
    [    6.776093] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
    [    6.777884] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
    [    6.792915] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
    [    6.798548] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
    [    6.802966] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
    [    6.810763] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
    [  OK      6.822995] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
    0m] Reac[    6.823542] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
    hed targ[    6.830924] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
    et     6.841425] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
    ;39mLoca[    6.852471] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    l File S[    6.853759] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
    ystems.
    [    6.873712] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
             Starting Rebuild Dynamic Linker Cache...
    [    6.895219] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
             Starting Create Volatile Files and Directories...
    [  OK  ] Finished Create Volatile Files and Directories.
    [    6.995252] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
    [    7.007862] usbcore: registered new interface driver brcmfmac
             Starting Rebuild Journal Catalog...
             Starting Network Name Resolution...
             Starting Network Time Synchronization...
             Starting Record System Boot/Shutdown in UTMP...
    [  OK  ] Finished Rebuild Journal Catalog.
    [  OK  ] Finished Record System Boot/Shutdown in UTMP.
    [    7.290634] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
    [    7.312992] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
    [  OK  ] Finished Rebuild Dynamic Linker Cache.
             Starting Update is Completed...
    [    7.355203] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
    [  OK  ] Finished Update is Completed.
    [  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
             Starting Load/Save RF Kill Switch Status...
             Starting Start psplash boot splash screen...
    [FAILED] Failed to start Start psplash boot splash screen.
    See 'systemctl status psplash-start.service' for details.
    [DEPEND] Dependency failed for Star…progress communication helper.
             Starting Start psplash boot splash screen...
    [FAILED] Failed to start Start psplash boot splash screen.
    See 'systemctl status psplash-start.service' for details.
    [DEPEND] Dependency failed for Star…progress communication helper.
    [  OK  ] Started Load/Save RF Kill Switch Status.
    [  OK  ] Started Network Name Resolution.
    [  OK  ] Found device /sys/subsystem/net/devices/wlan0.
    [    7.821285] random: crng init done
    [    7.824757] random: 7 urandom warning(s) missed due to ratelimiting
    [    7.828150] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
    [  OK  ] Reached target Host and Network Name Lookups.
    [  OK  ] Started Network Time Synchronization.
    [  OK  ] Finished Load/Save Random Seed.
    [  OK  ] Reached target System Initialization.
    [  OK  ] Started Daily Cleanup of Temporary Directories.
    [  OK  ] Reached target Boot Completion Check.
    [  OK  ] Reached target System Time Set.
    [  OK  ] Reached target Timer Units.
    [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
    [  OK  ] Listening on D-Bus System Message Bus Socket.
    [  OK  ] Listening on dropbear.socket.
    [  OK  ] Reached target Socket Units.
    [  OK  ] Reached target Basic System.
             Starting Save/Restore Sound Card State...
             Starting Avahi mDNS/DNS-SD Stack...
    [  OK  ] Started Kernel Logging Service.
    [  OK  ] Started System Logging Service.
    [  OK  ] Started D-Bus System Message Bus.
    [  OK  ] Started A minimalistic net…Pv4, rdisc and DHCPv6 support.
             Starting Configure Bluetooth Modems connected by UART...
             Starting Telephony service...
    [    8.291553] 8021q: 802.1Q VLAN Support v1.8
    [    8.298806] audit: type=1334 audit(1636549116.971:4): prog-id=7 op=LOAD
    [    8.305628] audit: type=1334 audit(1636549116.971:5): prog-id=8 op=LOAD
            [    8.313826] uart-pl011 fe201000.serial: no DMA platform data
     Starting User Login Management...
             Starting Commit a transient machine-id on disk...
    [  OK  ] Started WPA supplicant dae…0211 driver-specific version).
             Starting WPA supplicant...
    [  OK  ] Finished Save/Restore Sound Card State.
    [  OK  ] Started Telephony service.
    [  OK  ] Started Avahi mDNS/DNS-SD Stack.
    [  OK  ] Reached target Sound Card.
    [  OK  ] Finished Commit a transient machine-id on disk.
    [  OK  ] Started     8.691650] Bluetooth: Core ver 2.22
    1;39mWPA[    8.696196] NET: Registered protocol family 31
     supplic[    8.701327] Bluetooth: HCI device and connection manager initialized
    ant.[    8.708584] Bluetooth: HCI socket layer initialized

    [    8.714452] Bluetooth: L2CAP socket layer initialized
    [    8.719796] Bluetooth: SCO socket layer initialized
    [  OK  ] Reached target Network.
             Starting Permit User Sessions...
    [  OK  ] Finished Permit User Sessions.
    [  OK  ] Started Getty on tty1.
    [  OK  ] Started Serial Getty on ttyS0.
    [  OK  ] Reached target Login Prompts.
    [  OK  ] Started User Login Management.
    [   14.115352] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

    OpenEmbedded nodistro.0 raspberrypi4-64 ttyS0

    raspberrypi4-64 login: [   15.048478] Bluetooth: HCI UART driver ver 2.3
    [   15.053073] Bluetooth: HCI UART protocol H4 registered
    [   15.058615] Bluetooth: HCI UART protocol Three-wire (H5) registered
    [   15.065454] Bluetooth: HCI UART protocol Broadcom registered
    [   15.324220] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   15.329743] Bluetooth: BNEP filters: protocol multicast
    [   15.335314] Bluetooth: BNEP socket layer initialized
    [   15.355534] NET: Registered protocol family 38
    [   15.366165] audit: type=1334 audit(1645960582.023:6): prog-id=9 op=LOAD
    [   15.373243] audit: type=1334 audit(1645960582.023:7): prog-id=10 op=LOAD
    [   15.447440] Bluetooth: RFCOMM TTY layer initialized
    [   15.452487] Bluetooth: RFCOMM socket layer initialized
    [   15.457947] Bluetooth: RFCOMM ver 1.11
    [   49.149033] audit: type=1334 audit(1645960615.807:8): prog-id=10 op=UNLOAD
    [   49.156083] audit: type=1334 audit(1645960615.807:9): prog-id=9 op=UNLOAD


    And it's stuck here.

    And it is also complaning about

    [    3.640033] systemd-fstab-generator[107]: Failed to create unit file /run/systemd/generator/boot.mount, as it already exists. Duplicate entry in /etc/fstab?
    [    3.699053] systemd[105]: /lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.


    My fstab looks like:

    # stock fstab - you probably want to override this with a machine specific one

    /dev/root            /                    auto       defaults              1  1
    proc                 /proc                proc       defaults              0  0
    devpts               /dev/pts             devpts     mode=0620,ptmxmode=0666,gid=5      0  0
    tmpfs                /run                 tmpfs      mode=0755,nodev,nosuid,strictatime 0  0
    tmpfs                /var/volatile        tmpfs      defaults              0  0

    # uncomment this if your device has a SD/MMC/Transflash slot
    #/dev/mmcblk0p1       /media/card          auto       defaults,sync,noauto  0  0

    /dev/mmcblk0p1  /boot   vfat    defaults        0       0

     

    Can you please let me know what could be the issue here and how to resolve it?

    Your help will be much appreciated.


    features_check and IMAGE_FEATURES or EXTRA_IMAGE_FEATURES

    Mauro Ziliani
     

    Hi all.

    With he class features_check is it possible to check the content od IMAGE_FEATURES or EXTRA_IMAGE_FEATURES too?


    Thanks all

      MZ


    Re: Service outage beginning Saturday Feb. 26th 1700 UTC

    Michael Halstead
     

    These services are now available.

    downloads.yoctoproject.org
    sstate.yoctoproject.org

    Restoring sources.openembedded.org is in process and it will be available shortly.

    Autobuilder workers will be available tomorrow.


    On Sat, Feb 26, 2022 at 5:40 PM Michael Halstead via lists.yoctoproject.org <mhalstead=linuxfoundation.org@...> wrote:
    These services are restored:

    The move continues.

    On Tue, Feb 22, 2022 at 5:02 PM Michael Halstead via lists.yoctoproject.org <mhalstead=linuxfoundation.org@...> wrote:
    We are moving several racks of servers to a new data center in order to save on costs and reduce maintenance overhead.

    Beginning Sat Feb 26 17:00 UTC 2022 / (9am PST)
    Ending before Sun Feb 27 06:00 UTC 2022 / (10pm PST)

    The following services will experience downtime during much of the outage window:

    Yocto Project Autobuilder (workers only)

    These services will also be offline for a shorter period of time during the window:

    IRC Logging

    Because many of our services are interdependent there may be unexpected issues with other services during the move.


    --
    Michael Halstead
    Linux Foundation / Yocto Project
    Systems Operations Engineer





    --
    Michael Halstead
    Linux Foundation / Yocto Project
    Systems Operations Engineer





    --
    Michael Halstead
    Linux Foundation / Yocto Project
    Systems Operations Engineer


    Re: Service outage beginning Saturday Feb. 26th 1700 UTC

    Michael Halstead
     

    These services are restored:

    The move continues.

    On Tue, Feb 22, 2022 at 5:02 PM Michael Halstead via lists.yoctoproject.org <mhalstead=linuxfoundation.org@...> wrote:
    We are moving several racks of servers to a new data center in order to save on costs and reduce maintenance overhead.

    Beginning Sat Feb 26 17:00 UTC 2022 / (9am PST)
    Ending before Sun Feb 27 06:00 UTC 2022 / (10pm PST)

    The following services will experience downtime during much of the outage window:

    Yocto Project Autobuilder (workers only)

    These services will also be offline for a shorter period of time during the window:

    IRC Logging

    Because many of our services are interdependent there may be unexpected issues with other services during the move.


    --
    Michael Halstead
    Linux Foundation / Yocto Project
    Systems Operations Engineer





    --
    Michael Halstead
    Linux Foundation / Yocto Project
    Systems Operations Engineer


    [meta-security][PATCH] apparmor: update to 3.0.4

    Armin Kuster
     

    drop to patches no longer needed
    use setuptools

    Signed-off-by: Armin Kuster <akuster808@...>
    ---
    .../{apparmor_3.0.1.bb => apparmor_3.0.4.bb} | 6 +-
    ...Update-make-check-to-select-tools-ba.patch | 91 -------------------
    recipes-mac/AppArmor/files/py3_10_fixup.patch | 35 -------
    3 files changed, 2 insertions(+), 130 deletions(-)
    rename recipes-mac/AppArmor/{apparmor_3.0.1.bb => apparmor_3.0.4.bb} (97%)
    delete mode 100644 recipes-mac/AppArmor/files/0001-Revert-profiles-Update-make-check-to-select-tools-ba.patch
    delete mode 100644 recipes-mac/AppArmor/files/py3_10_fixup.patch

    diff --git a/recipes-mac/AppArmor/apparmor_3.0.1.bb b/recipes-mac/AppArmor/apparmor_3.0.4.bb
    similarity index 97%
    rename from recipes-mac/AppArmor/apparmor_3.0.1.bb
    rename to recipes-mac/AppArmor/apparmor_3.0.4.bb
    index 818be15..8ad3c76 100644
    --- a/recipes-mac/AppArmor/apparmor_3.0.1.bb
    +++ b/recipes-mac/AppArmor/apparmor_3.0.4.bb
    @@ -18,20 +18,18 @@ SRC_URI = " \
    file://run-ptest \
    file://crosscompile_perl_bindings.patch \
    file://0001-Makefile.am-suppress-perllocal.pod.patch \
    - file://0001-Revert-profiles-Update-make-check-to-select-tools-ba.patch \
    file://0001-Makefile-fix-hardcoded-installation-directories.patch \
    file://0001-rc.apparmor.debian-add-missing-functions.patch \
    - file://py3_10_fixup.patch \
    "

    -SRCREV = "b23de501807b8b5793e9654da8688b5fd3281154"
    +SRCREV = "9799fbde997820bb12a49e292356f7a6ce12e972"
    S = "${WORKDIR}/git"

    PARALLEL_MAKE = ""

    COMPATIBLE_MACHINE:mips64 = "(!.*mips64).*"

    -inherit pkgconfig autotools-brokensep update-rc.d python3native python3targetconfig perlnative cpan systemd features_check bash-completion
    +inherit pkgconfig autotools-brokensep update-rc.d python3native python3targetconfig perlnative cpan systemd features_check bash-completion setuptools3

    REQUIRED_DISTRO_FEATURES = "apparmor"

    diff --git a/recipes-mac/AppArmor/files/0001-Revert-profiles-Update-make-check-to-select-tools-ba.patch b/recipes-mac/AppArmor/files/0001-Revert-profiles-Update-make-check-to-select-tools-ba.patch
    deleted file mode 100644
    index e7abd60..0000000
    --- a/recipes-mac/AppArmor/files/0001-Revert-profiles-Update-make-check-to-select-tools-ba.patch
    +++ /dev/null
    @@ -1,91 +0,0 @@
    -From 5ed21abbef4d4c2983e70bd2868fb817150e883e Mon Sep 17 00:00:00 2001
    -From: Armin Kuster <akuster808@...>
    -Date: Sat, 3 Oct 2020 11:26:46 -0700
    -Subject: [PATCH] Revert "profiles: Update 'make check' to select tools based
    - on USE_SYSTEM"
    -
    -This reverts commit 6016f931ebf7b61e1358f19453ef262d9d184a4e.
    -
    -Upstream-Status: Inappropriate [OE specific]
    -These changes cause during packaging with perms changing.
    -
    -Signed-off-by: Armin Kuster <akuster808@...>
    -
    ----
    - profiles/Makefile | 50 ++++++++++-------------------------------------
    - 1 file changed, 10 insertions(+), 40 deletions(-)
    -
    -diff --git a/profiles/Makefile b/profiles/Makefile
    -index ba47fc16..5384cb05 100644
    ---- a/profiles/Makefile
    -+++ b/profiles/Makefile
    -@@ -35,49 +35,9 @@ EXTRAS_SOURCE=./apparmor/profiles/extras/
    - SUBDIRS=$(shell find ${PROFILES_SOURCE} -type d -print)
    - TOPLEVEL_PROFILES=$(filter-out ${SUBDIRS}, $(wildcard ${PROFILES_SOURCE}/*))
    -
    --ifdef USE_SYSTEM
    -- PYTHONPATH=
    -- PARSER?=apparmor_parser
    -- LOGPROF?=aa-logprof
    --else
    -- # PYTHON_DIST_BUILD_PATH based on libapparmor/swig/python/test/Makefile.am
    -- PYTHON_DIST_BUILD_PATH = ../libraries/libapparmor/swig/python/build/$$($(PYTHON) -c "import distutils.util; import platform; print(\"lib.%s-%s\" %(distutils.util.get_platform(), platform.python_version()[:3]))")
    -- LIBAPPARMOR_PATH=../libraries/libapparmor/src/.libs/
    -- LD_LIBRARY_PATH=$(LIBAPPARMOR_PATH):$(PYTHON_DIST_BUILD_PATH)
    -- PYTHONPATH=../utils/:$(PYTHON_DIST_BUILD_PATH)
    -- PARSER?=../parser/apparmor_parser
    -- # use ../utils logprof
    -- LOGPROF?=LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) PYTHONPATH=$(PYTHONPATH) $(PYTHON) ../utils/aa-logprof
    --endif
    --
    - # $(PWD) is wrong when using "make -C profiles" - explicitely set it here to get the right value
    - PWD=$(shell pwd)
    -
    --.PHONY: test-dependencies
    --test-dependencies: __parser __libapparmor
    --
    --
    --.PHONY: __parser __libapparmor
    --__parser:
    --ifndef USE_SYSTEM
    -- @if [ ! -f $(PARSER) ]; then \
    -- echo "error: $(PARSER) is missing. Pick one of these possible solutions:" 1>&2; \
    -- echo " 1) Test using the in-tree parser by building it first and then trying again. See the top-level README for help." 1>&2; \
    -- echo " 2) Test using the system parser by adding USE_SYSTEM=1 to your make command." 1>&2; \
    -- exit 1; \
    -- fi
    --endif
    --
    --__libapparmor:
    --ifndef USE_SYSTEM
    -- @if [ ! -f $(LIBAPPARMOR_PATH)libapparmor.so ]; then \
    -- echo "error: $(LIBAPPARMOR_PATH)libapparmor.so is missing. Pick one of these possible solutions:" 1>&2; \
    -- echo " 1) Build against the in-tree libapparmor by building it first and then trying again. See the top-level README for help." 1>&2; \
    -- echo " 2) Build against the system libapparmor by adding USE_SYSTEM=1 to your make command." 1>&2; \
    -- exit 1; \
    -- fi
    --endif
    --
    - local:
    - for profile in ${TOPLEVEL_PROFILES}; do \
    - fn=$$(basename $$profile); \
    -@@ -109,6 +69,16 @@ else
    - Q=
    - endif
    -
    -+ifndef PARSER
    -+# use system parser
    -+PARSER=../parser/apparmor_parser
    -+endif
    -+
    -+ifndef LOGPROF
    -+# use ../utils logprof
    -+LOGPROF=PYTHONPATH=../utils $(PYTHON) ../utils/aa-logprof
    -+endif
    -+
    - .PHONY: docs
    - # docs: should we have some here?
    - docs:
    ---
    -2.17.1
    -
    diff --git a/recipes-mac/AppArmor/files/py3_10_fixup.patch b/recipes-mac/AppArmor/files/py3_10_fixup.patch
    deleted file mode 100644
    index 05f8460..0000000
    --- a/recipes-mac/AppArmor/files/py3_10_fixup.patch
    +++ /dev/null
    @@ -1,35 +0,0 @@
    -m4/ax_python_devel.m4: do not check for distutils
    -
    -With py 3.10 this prints a deprecation warning which is
    -taken as an error. Upstream should rework the code to not
    -use distuils.
    -
    -Upstream-Status: Inappropriate [needs a proper fix upstream]
    -Signed-off-by: Armin Kuster <akuster808@...>
    -
    -Index: git/libraries/libapparmor/m4/ac_python_devel.m4
    -===================================================================
    ---- git.orig/libraries/libapparmor/m4/ac_python_devel.m4
    -+++ git/libraries/libapparmor/m4/ac_python_devel.m4
    -@@ -66,21 +66,6 @@ variable to configure. See ``configure -
    - fi
    -
    - #
    -- # Check if you have distutils, else fail
    -- #
    -- AC_MSG_CHECKING([for the distutils Python package])
    -- ac_distutils_result=`$PYTHON -c "import distutils" 2>&1`
    -- if test -z "$ac_distutils_result"; then
    -- AC_MSG_RESULT([yes])
    -- else
    -- AC_MSG_RESULT([no])
    -- AC_MSG_ERROR([cannot import Python module "distutils".
    --Please check your Python installation. The error was:
    --$ac_distutils_result])
    -- PYTHON_VERSION=""
    -- fi
    --
    -- #
    - # Check for Python include path
    - #
    - AC_MSG_CHECKING([for Python include path])
    --
    2.25.1

    1081 - 1100 of 57347