Date   

Re: #dunfell Path to sources in debugfs #dunfell

Robert Berger
 

Hi,

My comments are inline.

On 05/10/2021 17:04, bohdan.shubenok@... wrote:
Hi all,
I`m trying to debug coredump generated on embedded system running dunfel.
Just to clarify your user space applications crashes and you try to see why? In other words you would like to load the application and the core file into your debugger and inspect it?

The issue I`m facing is with the source files path in "-dbg.rootfs" archive and within dedug portion of a package.
When loaded in QtCreator some sources can`t be found :
The part is missing is "*build/..*". Such notation is obviosly cancels itself and adding empty "build" folder manually helps.
This path allings with how it builds. Here is a part of Makefile found in build path for sqlite:
   build/Makefile:20:VPATH = ../sqlite-autoconf-3310100
   build/Makefile:313:abs_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:315:abs_top_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:358:srcdir = ../sqlite-autoconf-3310100
So I tried to disable out-of-tree build for sqlite by replacing *'inherit autotools*' with '*inherit autotools-brokensep*'. After building and loading new debugfs QtCreator was able to found required sources:
Is this a known issue or me doing something wrong with build setup?
This is very strange, but also I am not quite sure how exactly you debug.
I assume you run gdbserver on the target and connect from some cross-gdb on your host to it.

You could try to install gdb onto your target plus debug info and sources to exclude the cross-gdb configuration problem as I describe below.

If you use gdbserver/cross-gdb I assume directories on your target rootfs and host roots are different. So you need to tell your cross-gdb on the host where to find the debug info and the sources.

Can you please try something like this?

http://docs.yoctoproject.org/singleindex.html#using-the-gdbserver-method

What I would inspect carefully is something like that:

$ cd directory-holding-the-debugfs-directory
$ arch-gdb
(gdb) set sysroot debugfs
(gdb) set substitute-path /usr/src/debug debugfs/usr/src/debug
(gdb) target remote IP-of-target:1234

At least in the latest and greatest version this works. I remember a bug a long time ago with some ancient yocto release with cross-debugging, but this was resolved with some upgrade and was certainly older than dunfell.

Regards,

Robert


Re: [meta-rockchip][PATCH] rockchip.wks: use uuid for /boot during fstab-update

Trevor Woerner
 

On Fri 2021-10-01 @ 03:20:35 PM, Markus Volk wrote:
Since the recent patch to switch to UUIDs [0aa5e600: "use uuid
instead of hard-coding root device"] wic fstab-update is not able
to get the correct value for the used device anymore and falls to
the default 'sda'. Thus wrong /dev/sda entries are generated in fstab.

For partitions that should be updated automatically this can be avoided
by either generate entries using uuid or label.

Signed-off-by: MarkusVolk <f_l_k@...>
---
wic/rockchip.wks | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
I tweaked the patch so that the fields lined up vertically, but otherwise…
Applied to meta-rockchip, master.
Thanks!


Re: [meta-rockchip][PATCH 3/3] nanopi-m4: add common override

Trevor Woerner
 

On Wed 2021-09-29 @ 01:29:38 AM, Trevor Woerner wrote:
Add a common override for both nanopi-m4 MACHINEs.

Signed-off-by: Trevor Woerner <twoerner@...>
---
conf/machine/include/nanopi-m4.inc | 3 +++
1 file changed, 3 insertions(+)
Applied to meta-rockchip, master.


Re: [meta-rockchip][PATCH 2/3] include/nanopi-m4: remove KMACHINE

Trevor Woerner
 

On Wed 2021-09-29 @ 01:29:37 AM, Trevor Woerner wrote:
There is no "nanopi-m4" defined in any yocto kernel metadata (yet?), therefore
remove this superfluous line.

Build (core-image-base) and run tested (both systemd and sysvinit) on:
- nanopi-m4

Signed-off-by: Trevor Woerner <twoerner@...>
---
conf/machine/include/nanopi-m4.inc | 1 -
1 file changed, 1 deletion(-)
Applied to meta-rockchip, master.


Re: [meta-rockchip][PATCH 1/3] linux-yocto: remove mmc aliases

Trevor Woerner
 

On Wed 2021-09-29 @ 01:29:36 AM, Trevor Woerner wrote:
Now that we're booting via UUID, we no longer need these aliases in the DT.
Personally I wasn't able to prove to myself that they actually worked (at
least not with 5.13.y) and fiddling with these aliases didn't seem to affect
the mmc probe order on boot. Additionally it looks like some of these aliases
will be landing upstream shortly.

Build (core-image-base) and run tested (both systemd and sysvinit) on:
- rock64
- rock-pi-e

(i.e. the two rk3328 MACHINEs)

Signed-off-by: Trevor Woerner <twoerner@...>
---
...an-dtsi-rk3328-add-mmc0-mmc1-aliases.patch | 27 -------------------
recipes-kernel/linux/linux-yocto%.bbappend | 3 ---
2 files changed, 30 deletions(-)
delete mode 100644 recipes-kernel/linux/files/0001-ayufan-dtsi-rk3328-add-mmc0-mmc1-aliases.patch
Applied to meta-rockchip, master.


Re: #dunfell Path to sources in debugfs #dunfell

Khem Raj
 

On 10/5/21 7:04 AM, bohdan.shubenok@... wrote:
Hi all,
I`m trying to debug coredump generated on embedded system running dunfel. The issue I`m facing is with the source files path in "-dbg.rootfs" archive and within dedug portion of a package.
When loaded in QtCreator some sources can`t be found :
The part is missing is "*build/..*". Such notation is obviosly cancels itself and adding empty "build" folder manually helps.
This path allings with how it builds. Here is a part of Makefile found in build path for sqlite:
   build/Makefile:20:VPATH = ../sqlite-autoconf-3310100
   build/Makefile:313:abs_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:315:abs_top_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:358:srcdir = ../sqlite-autoconf-3310100
So I tried to disable out-of-tree build for sqlite by replacing *'inherit autotools*' with '*inherit autotools-brokensep*'. After building and loading new debugfs QtCreator was able to found required sources:
Is this a known issue or me doing something wrong with build setup?
I think its not a general problem with autotool based projects doing out of tree builds but just with sqlite3 package. Perhaps you might want to look at compiler commandline options being passed to sqlite3 build and see if paths can be adjusted during build to account for out of tree build.


Re: virtual/egl on Raspberry Pi 4

Greg Wilson-Lindberg
 

Hi Khem,

I added the VC4GRAPHICS line and here is the complete error that I get:


ERROR: Nothing PROVIDES 'virtual/egl' (but /home/gwilson/Qt-5.15.6/Yocto-build-RPi4/sources/meta-qt5/recipes-qt/qt5/qtbase_git.bb DEPENDS on or otherwise requires it)
vc-graphics PROVIDES virtual/egl but was skipped: PREFERRED_PROVIDER_virtual/libgles2 set to mesa, not vc-graphics
opengldummy PROVIDES virtual/egl but was skipped: PREFERRED_PROVIDER_virtual/libgles2 set to mesa, not opengldummy
vc-graphics-hardfp PROVIDES virtual/egl but was skipped: PREFERRED_PROVIDER_virtual/libgles2 set to mesa, not vc-graphics-hardfp
qtglesstream-dummy-client PROVIDES virtual/egl but was skipped: PREFERRED_PROVIDER_virtual/libgles2 set to mesa, not qtglesstream-dummy-client
NOTE: Runtime target 'zint' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['zint', 'qtbase', 'virtual/egl']

Regards,

Greg


From: Khem Raj <raj.khem@...>
Sent: Tuesday, October 5, 2021 9:31:49 AM
To: Greg Wilson-Lindberg
Cc: yocto@...
Subject: Re: [yocto] virtual/egl on Raspberry Pi 4
 
that should have worked well for userland recipe to provide it. Maybe
you need to set

VC4GRAPHICS = ""

in local.conf

On Tue, Oct 5, 2021 at 8:53 AM Greg Wilson-Lindberg
<GWilson@...> wrote:
>
> I am compiling in 32 bit mode.
>
>
>
> From: Khem Raj <raj.khem@...>
> Sent: Monday, October 4, 2021 5:15 PM
> To: Greg Wilson-Lindberg <GWilson@...>
> Cc: yocto@...
> Subject: Re: [yocto] virtual/egl on Raspberry Pi 4
>
>
>
> It should have automatically found user land package as one of providers but if it is not doing so that means it’s being ignored because it’s not compatible arch or something
>
> Are you compiling 32bit mode ?
>
>
>
>
>
> On Mon, Oct 4, 2021 at 4:08 PM Greg Wilson-Lindberg <GWilson@...> wrote:
>
> Hi Khem,
> Yes, the Raspberry Pi boards do use closed source drivers. What I need is how do I include the proper package that will bring in the necessary virtual/egl for the Raspberry Pi 4.
>
> Greg
> > -----Original Message-----
> > From: Khem Raj <raj.khem@...>
> > Sent: Monday, October 4, 2021 14:17
> > To: Greg Wilson-Lindberg <GWilson@...>;
> > yocto@...
> > Subject: Re: [yocto] virtual/egl on Raspberry Pi 4
> >
> >
> >
> > On 10/4/21 12:39 PM, Greg Wilson-Lindberg wrote:
> > > Hello list,
> > >
> > > I'm working on a Qt supplied boot2qt Yocto build currently based on
> > > Zeus that is running on a Raspberry Pi 4. I recently updated the qt
> > > version to 5.15.6 and Qt changed something in the Yocto configuration
> > > that they are using and now one of the recipes that we use is failing
> > > saying that in needs 'virtual/egl' but that it is not provided by any recipe.
> > >
> > > In the searching that I have done I have found that the raspberry pi 4
> > > is particular on which package supplies the virtual/egl but I haven't
> > > seen anything that indicates what I should do to re-enable it.
> > >
> > > Can anyone tell me what I need to do to enable the correct driver to
> > > get virtual/egl provided on the Raspberry Pi 4? Or maybe even better,
> > > how I could search through the packages that are enabled on the old
> > > and new Yocto trees so that I can figure out what changed between the
> > > releases and re-enable the virtual/egl.
> > >
> >
> > it should be provided by userland package if you are using closed source
> > graphics driver.
> >
> > > Best Regards,
> > >
> > > Greg Wilson-Lindberg
> > >
> > >
> > >
> > >
> > >


Re: file package dependency

Khem Raj
 

On 10/5/21 5:10 AM, Timur wrote:
Hi, I'm building a yocto release from the thud branch. The size of the OS image is very critical, so I need to remove as much as I can. Looking at the dependency information, I can see that the "file" package is not required by any other package, but yet it is installed. I really have to remove this package because it is quite large with its magic database, but I can't find who is installing it and why.
I think looking into buildhistory metadata might give some hints, it stores the information about image to package dependencies in a dotty file which you can either open in a viewer or text editor and see who might be pulling the package which provides file utility. So firstly you have to find which package provides file utility which could be done via oe-pkg-utils tool


Re: virtual/egl on Raspberry Pi 4

Khem Raj
 

that should have worked well for userland recipe to provide it. Maybe
you need to set

VC4GRAPHICS = ""

in local.conf

On Tue, Oct 5, 2021 at 8:53 AM Greg Wilson-Lindberg
<GWilson@...> wrote:

I am compiling in 32 bit mode.



From: Khem Raj <raj.khem@...>
Sent: Monday, October 4, 2021 5:15 PM
To: Greg Wilson-Lindberg <GWilson@...>
Cc: yocto@...
Subject: Re: [yocto] virtual/egl on Raspberry Pi 4



It should have automatically found user land package as one of providers but if it is not doing so that means it’s being ignored because it’s not compatible arch or something

Are you compiling 32bit mode ?





On Mon, Oct 4, 2021 at 4:08 PM Greg Wilson-Lindberg <GWilson@...> wrote:

Hi Khem,
Yes, the Raspberry Pi boards do use closed source drivers. What I need is how do I include the proper package that will bring in the necessary virtual/egl for the Raspberry Pi 4.

Greg
-----Original Message-----
From: Khem Raj <raj.khem@...>
Sent: Monday, October 4, 2021 14:17
To: Greg Wilson-Lindberg <GWilson@...>;
yocto@...
Subject: Re: [yocto] virtual/egl on Raspberry Pi 4



On 10/4/21 12:39 PM, Greg Wilson-Lindberg wrote:
Hello list,

I'm working on a Qt supplied boot2qt Yocto build currently based on
Zeus that is running on a Raspberry Pi 4. I recently updated the qt
version to 5.15.6 and Qt changed something in the Yocto configuration
that they are using and now one of the recipes that we use is failing
saying that in needs 'virtual/egl' but that it is not provided by any recipe.

In the searching that I have done I have found that the raspberry pi 4
is particular on which package supplies the virtual/egl but I haven't
seen anything that indicates what I should do to re-enable it.

Can anyone tell me what I need to do to enable the correct driver to
get virtual/egl provided on the Raspberry Pi 4? Or maybe even better,
how I could search through the packages that are enabled on the old
and new Yocto trees so that I can figure out what changed between the
releases and re-enable the virtual/egl.
it should be provided by userland package if you are using closed source
graphics driver.

Best Regards,

Greg Wilson-Lindberg





Re: virtual/egl on Raspberry Pi 4

Greg Wilson-Lindberg
 

I am compiling in 32 bit mode.

 

From: Khem Raj <raj.khem@...>
Sent: Monday, October 4, 2021 5:15 PM
To: Greg Wilson-Lindberg <GWilson@...>
Cc: yocto@...
Subject: Re: [yocto] virtual/egl on Raspberry Pi 4

 

It should have automatically found user land package as one of providers but if it is not doing so that means it’s being ignored because it’s not compatible arch or something 

Are you compiling 32bit mode ? 

 

 

On Mon, Oct 4, 2021 at 4:08 PM Greg Wilson-Lindberg <GWilson@...> wrote:

Hi Khem,
Yes, the Raspberry Pi boards do use closed source drivers. What I need is how do I include the proper package that will bring in the necessary virtual/egl for the Raspberry Pi 4.

Greg
> -----Original Message-----
> From: Khem Raj <raj.khem@...>
> Sent: Monday, October 4, 2021 14:17
> To: Greg Wilson-Lindberg <GWilson@...>;
> yocto@...
> Subject: Re: [yocto] virtual/egl on Raspberry Pi 4
>
>
>
> On 10/4/21 12:39 PM, Greg Wilson-Lindberg wrote:
> > Hello list,
> >
> > I'm working on a Qt supplied boot2qt Yocto build currently based on
> > Zeus that is running on a Raspberry Pi 4. I recently updated the qt
> > version to 5.15.6 and Qt changed something in the Yocto configuration
> > that they are using and now one of the recipes that we use is failing
> > saying that in needs 'virtual/egl' but that it is not provided by any recipe.
> >
> > In the searching that I have done I have found that the raspberry pi 4
> > is particular on which package supplies the virtual/egl but I haven't
> > seen anything that indicates what I should do to re-enable it.
> >
> > Can anyone tell me what I need to do to enable the correct driver to
> > get virtual/egl provided on the Raspberry Pi 4? Or maybe even better,
> > how I could search through the packages that are enabled on the old
> > and new Yocto trees so that I can figure out what changed between the
> > releases and re-enable the virtual/egl.
> >
>
> it should be provided by userland package if you are using closed source
> graphics driver.
>
> > Best Regards,
> >
> > Greg Wilson-Lindberg
> >
> >
> >
> >
> >


Yocto Project Status WW40`21

Stephen Jolley
 

Current Dev Position: YP 3.4 M4

Next Deadline: 4th Oct. 2021 YP 3.4 M4 build

 

Next Team Meetings:

 

Key Status/Updates:

  • The final 3.4 build is now due.
  • We should be in a reasonable position and ready for the 3.4 build, except for the SOURCE_DATE_EPOCH corruption issues we’re seeing. Once those issues and the related sstate reuse issues are fixed, we’ll build 3.4. At this point there are other patches but they’re causing failures and clearly aren’t ready for merging.
  • There continues to be an sstate reuse issue where native sstate on aarch64 and x86_64 hosts isn’t generating correct hashes when combined with hash equivalence.
  • Intermittent issues took a significant rise last week as SWAT caught up with the backlog of issues. Help is very much welcome on these issues. You can see the list of failures we’re continuing to see by searching for the “AB-INT” tag in bugzilla: https://bugzilla.yoctoproject.org/buglist.cgi?quicksearch=AB-INT

 

Ways to contribute:

 

YP 3.4 Milestone Dates:

  • YP 3.4 M4 build date 2021/10/04
  • YP 3.4 M4 Release date 2021/10/29

 

Tracking Metrics:

 

The Yocto Project’s technical governance is through its Technical Steering Committee, more information is available at:

https://wiki.yoctoproject.org/wiki/TSC

 

The Status reports are now stored on the wiki at: https://wiki.yoctoproject.org/wiki/Weekly_Status

 

[If anyone has suggestions for other information you’d like to see on this weekly status update, let us know!]

 

Thanks,

 

Stephen K. Jolley

Yocto Project Program Manager

(    Cell:                (208) 244-4460

* Email:              sjolley.yp.pm@...

 


Re: [meta-zephyr 0/2] add support of the zephyr-openamp-rsc-table sample on STM32MP157

Arnaud Pouliquen <arnaud.pouliquen@...>
 

Hello Saini,

On 10/5/21 9:08 AM, Saini, Naveen Kumar wrote:
This is only cover letter, I do not see patches on mailing list..
Yes something strange, they are not listed on same page of the archive on
https://lists.yoctoproject.org/

Patch 1/2 and patch 2/2 associated with this one are visible in the Yocto archive:

link to the patches on mail-archive.com:
https://www.mail-archive.com/yocto@lists.yoctoproject.org/msg07088.html
https://www.mail-archive.com/yocto@lists.yoctoproject.org/msg07089.html

Please tell me if you need that I resend the series.

Regards,
Arnaud



Regards,
Naveen

-----Original Message-----
From: yocto@... <yocto@...> On
Behalf Of Arnaud Pouliquen
Sent: Wednesday, September 29, 2021 5:41 PM
To: yocto@...
Cc: Kumar Gala <kumar.gala@...>; Kevin Townsend
<kevin.townsend@...>
Subject: [yocto] [meta-zephyr 0/2] add support of the zephyr-openamp-rsc-
table sample on STM32MP157

Add capability to genereate the "zephyr-openamp-rsc-table" sample in yocto
build.

This example demonstrates inter-processor communication based on a
resource table, with the objective of responding to the Linux kernel rpmsg
sample.

This sample is compatible with the stm32mp157c_dk2 board.
The support of the board is also added in this series.

Arnaud Pouliquen (2):
conf: machine: add stm32mp157c-dk2 support
zephyr-kernel: add openamp-rsc-table sample

conf/machine/stm32mp157c-dk2.conf | 8 ++++++++
.../zephyr-kernel/zephyr-openamp-rsc-table.bb | 10 ++++++++++
2 files changed, 18 insertions(+)
create mode 100644 conf/machine/stm32mp157c-dk2.conf create mode
100644 recipes-kernel/zephyr-kernel/zephyr-openamp-rsc-table.bb

--
2.17.1


#dunfell Path to sources in debugfs #dunfell

bohdan.shubenok@...
 

Hi all,

I`m trying to debug coredump generated on embedded system running dunfel. The issue I`m facing is with the source files path in "-dbg.rootfs" archive and within dedug portion of a package.
When loaded in QtCreator some sources can`t be found :


The part is missing is "build/..". Such notation is obviosly cancels itself and adding empty "build" folder manually helps.
This path allings with how it builds. Here is a part of Makefile found in build path for sqlite:

   build/Makefile:20:VPATH = ../sqlite-autoconf-3310100
   build/Makefile:313:abs_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:315:abs_top_srcdir = /home/bohdan/noah/noah/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/sqlite3/3_3.31.1-r0/build/../sqlite-autoconf-3310100
   build/Makefile:358:srcdir = ../sqlite-autoconf-3310100

So I tried to disable out-of-tree build for sqlite by replacing  'inherit autotools' with 'inherit autotools-brokensep'. After building and loading new debugfs QtCreator was able to found required sources:


Is this a known issue or me doing something wrong with build setup?


file package dependency

Timur
 

Hi, I'm building a yocto release from the thud branch. The size of the OS image is very critical, so I need to remove as much as I can. Looking at the dependency information, I can see that the "file" package is not required by any other package, but yet it is installed. I really have to remove this package because it is quite large with its magic database, but I can't find who is installing it and why.

--
Timur Aydın
TEL: 536 939 65 88


Re: Enabling Websockets in Mosquitto in yocto zeus #zeus

Nicolas Jeker
 

On Fri, 2021-10-01 at 03:45 -0700, poornesh@... wrote:
Greetings !

I could able to add Mosquitto in Yocto Zeus , but as default websockets
is disabled in Mosquitto . Can anyone help me how to enable websockets
in Mosquitto in yocto zeus.
There's a 'websockets' PACKAGECONFIG for the mosquitto recipe. You can
read more about how to change PACKAGECONFIGs in the documentation [1].

Be aware that since yocto dunfell, the websockets PACKAGECONFIG is
enabled by default, so you can remove it if you update to a newer
version in the future.

[1]:
https://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#var-PACKAGECONFIG

Thanks in Advance


Re: [meta-zephyr 0/2] add support of the zephyr-openamp-rsc-table sample on STM32MP157

Naveen Saini
 

This is only cover letter, I do not see patches on mailing list..

Regards,
Naveen

-----Original Message-----
From: yocto@... <yocto@...> On
Behalf Of Arnaud Pouliquen
Sent: Wednesday, September 29, 2021 5:41 PM
To: yocto@...
Cc: Kumar Gala <kumar.gala@...>; Kevin Townsend
<kevin.townsend@...>
Subject: [yocto] [meta-zephyr 0/2] add support of the zephyr-openamp-rsc-
table sample on STM32MP157

Add capability to genereate the "zephyr-openamp-rsc-table" sample in yocto
build.

This example demonstrates inter-processor communication based on a
resource table, with the objective of responding to the Linux kernel rpmsg
sample.

This sample is compatible with the stm32mp157c_dk2 board.
The support of the board is also added in this series.

Arnaud Pouliquen (2):
conf: machine: add stm32mp157c-dk2 support
zephyr-kernel: add openamp-rsc-table sample

conf/machine/stm32mp157c-dk2.conf | 8 ++++++++
.../zephyr-kernel/zephyr-openamp-rsc-table.bb | 10 ++++++++++
2 files changed, 18 insertions(+)
create mode 100644 conf/machine/stm32mp157c-dk2.conf create mode
100644 recipes-kernel/zephyr-kernel/zephyr-openamp-rsc-table.bb

--
2.17.1


Re: [meta-security,dunfell][PATCH] recipes-security/fscrypt: Add fscrypt .bb file

Bhupesh Sharma
 

Hello Armin,

Many thanks for your review.

On Sun, 26 Sept 2021 at 03:01, akuster808 <akuster808@...> wrote:



On 9/19/21 12:19 PM, Bhupesh Sharma wrote:
fscrypt is a high-level tool for the management of Linux
filesystem encryption. fscrypt manages metadata, key generation,
key wrapping, PAM integration, and provides a uniform interface
for creating and modifying encrypted directories.

Add recipe for the same in 'recipes-security'.
Was this a double post? or a V2?
Sorry for the double post, but since I had some issues subscribing to
the OE-list, my first attempt to post was not accepted by the mailing
list server.

I follow the OE/YP Stable process and this appears to be adding a new
package to a stable release which is not allowed.. I have no issue
taking it for Master.
Sure. I realized my mistake later-on. I should have sent it for the
'master' branch and not stable / dunfell. Can you please consider
taking this into the 'master' branch, or should I send the patch
separately.

Thanks and sorry for the late reply,
Bhupesh

-armin

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...>
---
recipes-security/fscrypt/fscrypt_1.0.0.bb | 49 +++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 recipes-security/fscrypt/fscrypt_1.0.0.bb

diff --git a/recipes-security/fscrypt/fscrypt_1.0.0.bb b/recipes-security/fscrypt/fscrypt_1.0.0.bb
new file mode 100644
index 0000000..a70d310
--- /dev/null
+++ b/recipes-security/fscrypt/fscrypt_1.0.0.bb
@@ -0,0 +1,49 @@
+SUMMARY = "fscrypt is a high-level tool for the management of Linux filesystem encryption"
+DESCIPTION = "fscrypt manages metadata, key generation, key wrapping, PAM integration, \
+and provides a uniform interface for creating and modifying encrypted directories. For \
+a small, low-level tool that directly sets policies, see fscryptctl \
+(https://github.com/google/fscryptcl)."
+HOMEPAGE = "https://github.com/google/fscrypt"
+SECTION = "base"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://src/${GO_IMPORT}/LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
+
+BBCLASSEXTEND = "native nativesdk"
+
+# fscrypt depends on go and libpam
+DEPENDS += "go-dep-native libpam"
+
+SRCREV = "92b1e9a8670ccd3916a7d24a06cab1e4c9815bc4"
+SRC_URI = "git://github.com/google/fscrypt.git"
+GO_IMPORT = "import"
+
+S = "${WORKDIR}/git"
+
+inherit go
+inherit goarch
+
+do_compile() {
+ export GOARCH=${TARGET_GOARCH}
+ export GOROOT="${STAGING_LIBDIR_NATIVE}/${TARGET_SYS}/go"
+ export GOPATH="${WORKDIR}/git"
+
+ # Pass the needed cflags/ldflags so that cgo
+ # can find the needed headers files and libraries
+ export CGO_ENABLED="1"
+ export CGO_CFLAGS="${CFLAGS} --sysroot=${STAGING_DIR_TARGET}"
+ export CGO_LDFLAGS="${LDFLAGS} --sysroot=${STAGING_DIR_TARGET}"
+
+ cd ${S}/src/${GO_IMPORT}
+ oe_runmake
+
+ # Golang forces permissions to 0500 on directories and 0400 on files in
+ # the module cache which prevents us from easily cleaning up the build
+ # directory. Let's just fix the permissions here so we don't have to
+ # hack the clean tasks.
+ chmod -R u+w ${S}/pkg/mod
+}
+
+do_install() {
+ install -d ${D}/${bindir}
+ install ${S}/src/${GO_IMPORT}/bin/fscrypt ${D}/${bindir}/fscrypt
+}


M+ & H bugs with Milestone Movements WW40

Stephen Jolley
 

All,

YP M+ or high bugs which moved to a new milestone in WW40 are listed below:

Priority

Bug ID

Short Description

Changer

Owner

Was

Became

Medium+

14263

AB-INT PTEST: lttng-tools ptest intermittent failure

randy.macleod@...

unassigned@...

3.4

3.4 M4

Thanks,

 

Stephen K. Jolley

Yocto Project Program Manager

(    Cell:                (208) 244-4460

* Email:              sjolley.yp.pm@...

 


Enhancements/Bugs closed WW40!

Stephen Jolley
 

All,

The below were the owners of enhancements or bugs closed during the last week!

Who

Count

richard.purdie@...

7

oobitots@...

1

alexandre.belloni@...

1

Grand Total

9

Thanks,

 

Stephen K. Jolley

Yocto Project Program Manager

(    Cell:                (208) 244-4460

* Email:              sjolley.yp.pm@...

 


Current high bug count owners for Yocto Project 3.4

Stephen Jolley
 

All,

Below is the list as of top 50 bug owners as of the end of WW40 of who have open medium or higher bugs and enhancements against YP 3.4.   There are 18 possible work days left until the final release candidates for YP 3.4 needs to be released.

Who

Count

michael.opdenacker@...

35

ross@...

31

david.reyna@...

22

randy.macleod@...

16

trevor.gamblin@...

14

bruce.ashfield@...

11

richard.purdie@...

10

timothy.t.orling@...

9

kai.kang@...

7

bluelightning@...

6

mhalstead@...

4

kiran.surendran@...

4

Qi.Chen@...

4

hongxu.jia@...

3

JPEWhacker@...

3

chee.yang.lee@...

3

thomas.perrot@...

2

akuster808@...

2

mingli.yu@...

2

mshah@...

2

saul.wold@...

2

raj.khem@...

1

tony.tascioglu@...

1

yi.zhao@...

1

sangeeta.jain@...

1

jay.shen.teoh@...

1

pokylinux@...

1

alexandre.belloni@...

1

alejandro@...

1

yf3yu@...

1

open.source@...

1

weaverjs@...

1

jaewon@...

1

fransmeulenbroeks@...

1

kergoth@...

1

mickael.laventure+yocto@...

1

ydirson@...

1

devendra.tewari@...

1

jeanmarie.lemetayer@...

1

diego.sueiro@...

1

aehs29@...

1

sakib.sajal@...

1

matthewzmd@...

1

douglas.royds@...

1

paul.gortmaker@...

1

paul@...

1

alex.kanavin@...

1

vinay.m.engg@...

1

shachar@...

1

pgowda.cve@...

1

mister_rs@...

1

Thanks,

 

Stephen K. Jolley

Yocto Project Program Manager

(    Cell:                (208) 244-4460

* Email:              sjolley.yp.pm@...

 

2861 - 2880 of 57793