|
Re: [Announcement] Cedartrail BSP available.
Intel at least have chosen to provide bootable images for their boards with a time-limited kernel to encourage people to do a build of their own for an actual product, rather than just pass through
Intel at least have chosen to provide bootable images for their boards with a time-limited kernel to encourage people to do a build of their own for an actual product, rather than just pass through
|
By
David Stewart
·
#4226
·
|
|
Re: [Announcement] Cedartrail BSP available.
Simple reason, the creator of the BSP wants you to configure and build your own kernel. The time limited kernel is for evaluation purposes to see if this is what you want, before you build it
Simple reason, the creator of the BSP wants you to configure and build your own kernel. The time limited kernel is for evaluation purposes to see if this is what you want, before you build it
|
By
Mark Hatle <mark.hatle@...>
·
#4225
·
|
|
Re: [Announcement] Cedartrail BSP available.
What is the purpose of building the provided images with time limited kernel?
Can I assume that a standard build of the unchanged meta-cedartrail BSP will use the non-tlk kernel?
Jim A
On Wed,
What is the purpose of building the provided images with time limited kernel?
Can I assume that a standard build of the unchanged meta-cedartrail BSP will use the non-tlk kernel?
Jim A
On Wed,
|
By
Jim Abernathy
·
#4224
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
<bruce.ashfield@...> wrote:
Thanks! I did a git checkout -b master origin/master and will try again.
Regards,
Brian
<bruce.ashfield@...> wrote:
Thanks! I did a git checkout -b master origin/master and will try again.
Regards,
Brian
|
By
Brian Hutchinson <b.hutchman@...>
·
#4223
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
Interesting. You can open a bug on this, boot and sanity/peripheral tests
were performed before I made the switch. So if this is broken, that's
a bug and we can look into it.
As you hinted, including
Interesting. You can open a bug on this, boot and sanity/peripheral tests
were performed before I made the switch. So if this is broken, that's
a bug and we can look into it.
As you hinted, including
|
By
Bruce Ashfield <bruce.ashfield@...>
·
#4222
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
Just so I'm clear. You are asking about the switch to 3.0 as the
default ? If so, that was only done in master for the upcoming 1.2
release and not on the edison branch, so you wouldn't pick it up
by
Just so I'm clear. You are asking about the switch to 3.0 as the
default ? If so, that was only done in master for the upcoming 1.2
release and not on the edison branch, so you wouldn't pick it up
by
|
By
Bruce Ashfield <bruce.ashfield@...>
·
#4221
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
On 11/01/12 15:20, Brian Hutchinson wrote: I can chime in here. I am currently trying to get my Beagleboard running on the master branch, and it is pulling in kernel 3.0.12. However
On 11/01/12 15:20, Brian Hutchinson wrote: I can chime in here. I am currently trying to get my Beagleboard running on the master branch, and it is pulling in kernel 3.0.12. However
|
By
Jack Mitchell <ml@...>
·
#4220
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
<bruce.ashfield@...> wrote:
Would I get that change if I just did a git pull or do I have to do
something else? I did a git pull to update my Edison checkout last
night realizing that I
<bruce.ashfield@...> wrote:
Would I get that change if I just did a git pull or do I have to do
something else? I did a git pull to update my Edison checkout last
night realizing that I
|
By
Brian Hutchinson <b.hutchman@...>
·
#4219
·
|
|
Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
It will. I sent patches recently to make that the preferred version
in the master branch. Cherry picking that change would probably
be all you would need.
Should be.
Bruce
It will. I sent patches recently to make that the preferred version
in the master branch. Cherry picking that change would probably
be all you would need.
Should be.
Bruce
|
By
Bruce Ashfield <bruce.ashfield@...>
·
#4218
·
|
|
Does Edison work with Beagleboard & linux-yocto-3.0 kernel?
Hi,
I followed the example in the "Yocto Project Development Manual" for
setting up a local kernel repo and it didn't go so well.
A month or two ago I checked out Edison and was able to build all
Hi,
I followed the example in the "Yocto Project Development Manual" for
setting up a local kernel repo and it didn't go so well.
A month or two ago I checked out Edison and was able to build all
|
By
Brian Hutchinson <b.hutchman@...>
·
#4217
·
|
|
Re: Request to enable SMP and virtio for qemux86/x86-64
It should be. I just need to look at the fallback modes, and how this
impacts different host systems. That being said, I've run with similar
configs in the past (depending on the workload) with no
It should be. I just need to look at the fallback modes, and how this
impacts different host systems. That being said, I've run with similar
configs in the past (depending on the workload) with no
|
By
Bruce Ashfield <bruce.ashfield@...>
·
#4216
·
|
|
Re: Unable to set system clock
The problem is that even when you set the date, your Poky system
does not use it when the system is rebooted because of this bug.
The simplest work-around (until the bug fix is finalized) is to
add
The problem is that even when you set the date, your Poky system
does not use it when the system is rebooted because of this bug.
The simplest work-around (until the bug fix is finalized) is to
add
|
By
Gary Thomas
·
#4215
·
|
|
Re: RFC: Joint, monthly, and online forum for developer discussion
I agree, in general, the more community/group discussion that goes on the better the resulting effort will be.
If the call was streamed live, there could be people listening and noting ideas which
I agree, in general, the more community/group discussion that goes on the better the resulting effort will be.
If the call was streamed live, there could be people listening and noting ideas which
|
By
Jack Mitchell <ml@...>
·
#4214
·
|
|
Request to enable SMP and virtio for qemux86/x86-64
Bruce,
Can we enable SMP and virtio by default for qemux86/x86-64? This can achieve
huge perf boost for workload inside qemu. E.g. we enabled self-hosted image,
where we build yocto inside
Bruce,
Can we enable SMP and virtio by default for qemux86/x86-64? This can achieve
huge perf boost for workload inside qemu. E.g. we enabled self-hosted image,
where we build yocto inside
|
By
Zhai, Edwin <edwin.zhai@...>
·
#4213
·
|
|
Re: hob usage
This is one of those quirks about hob I found weird. I filed a bug about this:
http://bugzilla.yoctoproject.org/show_bug.cgi?id=1573
In general you need to save it somewhere one of your layers looks
This is one of those quirks about hob I found weird. I filed a bug about this:
http://bugzilla.yoctoproject.org/show_bug.cgi?id=1573
In general you need to save it somewhere one of your layers looks
|
By
McClintock Matthew-B29882 <B29882@...>
·
#4212
·
|
|
[PATCH] meta-emenlow: fix ptr->int and Werror=address compile errors
A couple of things that had previously been warnings are now errors,
so they need to be fixed up.
The first problem is the same problem encountered by xserver-kdrive,
and has the same fix, namely
A couple of things that had previously been warnings are now errors,
so they need to be fixed up.
The first problem is the same problem encountered by xserver-kdrive,
and has the same fix, namely
|
By
Tom Zanussi <tom.zanussi@...>
·
#4211
·
|
|
hob usage
I have a question about hob usage. I understand the basics of hob and how it adds packages. I also understand how it will parse through my local.conf and include any extra packages that I may have
I have a question about hob usage. I understand the basics of hob and how it adds packages. I also understand how it will parse through my local.conf and include any extra packages that I may have
|
By
Jim Abernathy
·
#4210
·
|
|
Re: [PATCH 1/4] lttng-ust: Integrate into yocto linux
于 2012年01月11日 00:58, Darren Hart 写道:
Oops, sorry Darren, all fixed and really soon for V4 on OE :-)
Regards,
Zumeng
于 2012年01月11日 00:58, Darren Hart 写道:
Oops, sorry Darren, all fixed and really soon for V4 on OE :-)
Regards,
Zumeng
|
By
Zumeng Chen <zumeng.chen@...>
·
#4209
·
|
|
Re: Yocto SWAT team kickoff
<elizabeth.flanagan@...> wrote:
Quick point of clarification (since I don't want people confused). The
above should read:
"We currently have 5 yocto autobuilders that are used to run the
<elizabeth.flanagan@...> wrote:
Quick point of clarification (since I don't want people confused). The
above should read:
"We currently have 5 yocto autobuilders that are used to run the
|
By
Flanagan, Elizabeth <elizabeth.flanagan@...>
·
#4208
·
|
|
Re: Yocto SWAT team kickoff
It is actually best for people to copy log files and the like to a
private place. As the autobuilder runs 24/7 you do not want to run the
risk of having work removed in the middle. Keep in mind,
It is actually best for people to copy log files and the like to a
private place. As the autobuilder runs 24/7 you do not want to run the
risk of having work removed in the middle. Keep in mind,
|
By
Flanagan, Elizabeth <elizabeth.flanagan@...>
·
#4207
·
|