From: Tom Zanussi <tom.zanussi@...> Switch sugarbay to the 3.0 kernel, lock it down, and update kernel SRCREVs. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

From: Tom Zanussi <tom.zanussi@...> Built and booted into sato - basic testing shows everything works as expected. The following changes since commit 96c247dad88b9fc0159b2a929216876d9fbb06dc:

Attendees: Saul, Tom, Paul, Jessica, Rahul, Koen, Joshua, Mark, Denys, Richard, Bruce, Song   Action Item List:

Hi, All This is the weekly test report for Yocto1.1 20110723 build. There is one new bug found. The qemuppc and qemumips images can not boot up due to kernel update to 3.0. Standby and I2C issue

All, We are pleased to announce the second milestone of the coming October release of Yocto 1.1. This milestone release is available

From: Tom Zanussi <tom.zanussi@...> Switch jasperforest to the 3.0 kernel, lock it down, and update kernel SRCREVs. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

From: Tom Zanussi <tom.zanussi@...> Built and booted into sato - basic testing shows everything works as expected. The following changes since commit 96c247dad88b9fc0159b2a929216876d9fbb06dc:

Hi all, The stress test on beagleboard pass today. Fullpass testing is finished for M2 RC3. There is no new issue found. You could find the test report on

Folks, There is a build available from the autobuilder http://autobuilder.yoctoproject.org/nightly/20110723-2/ There were a couple of failures in the LSB-QT3 Builds that are being looked into. The

Hi all, RC3 is built out last week and QA is testing it. The new-submit vs. fixed bug is 26 vs. 24 for last week. The open bug number increased to 185 (No enhancement bugs counted). WDD number

On Monday July 25th from 10 to 11am PDT we will move git.yoctoproject.org and git.pokylinux.org to new hardware hosted at the OSU Open Source Lab. Read only access will be available during the entire

Hi all, Currently the only one testing not finished is the LTP stress testing on beagleboard, which is supposed to be finished next Monday. QA does not find other new issues, compared with RC3

this is something i noticed a couple days back -- trying to "bitbake -c fetchall world" failed on the sat-solver package: NOTE: Running task 478 of 1358 (ID:

This doesn't match the documentation: ./meta/conf/documentation.conf:TARGET_FPU[doc] = "Floating point option (mostly for FPU-less systems), can be 'soft' or empty The file

Pulled into Yocto/Master Thanks Sau!

Fixed mine. ScottR

Richard, ping. Bruce has ack'd this. https://lists.yoctoproject.org/pipermail/yocto/2011-July/001915.html - k

I did a fresh build in a new clean directory now and it fails too. The error log (attached) is a bit different though. What i did: - source poky-init-build-env build python - edit conf/local.conf to

Sounds correct... Is this on a fresh clean build directory? You could also try "bitbake -c cleansstate python gdbm" on your existing build directory and retry "bitbake python" to see if its

Hi Richard, thanks for your answer. See below ... this is the output of the file command: libgdbm.so.3.0.0: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, not