yocto@lists.yoctoproject.org

Re: Not booting on BeagleBoard xM 0x2

Garry/Andrea, I am currently giving a training based on the Beagle-XM an this error happened at the same time on 5 boards with a 3.1 kernel. The fix was to change the SD cards and use cards from a

By Robert Berger <gmane@...> · #5809 ·

Re: Yocto Project 1.2 Beta testing instructions

Can someone help answer the following question? This happens during Boon Pin’s beta testing using the build at:

By Liu, Song <song.liu@...> · #5808 ·

Re: Not booting on BeagleBoard xM 0x2

I haven't had a chance to try it yet. I got it from the meta-ti layer. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB

By Gary Thomas · #5807 ·

Re: Not booting on BeagleBoard xM 0x2

Hi Gary, That's exactly the same error I see! Happy to know am not alone... I'm going to give it a try as soon as I can. Did you already submit it somewhere? Andrea

By Andrea Galbusera · #5805 ·

Experience survey of using Yocto 1.2

Experience survey of using Yocto 1.2 Q: Which architecture did you choose to build? A: qemu x86 and beagleboard Q: How easily were you able to build an image and boot an image? A: very

By Alyne, Howard <howard.alyne@...> · #5806 ·

Re: Not booting on BeagleBoard xM 0x2

Just FYI, it also doesn't boot on my rev-C3 (not xM), albeit with a different error pattern. It hangs at this point: Waiting for root device /dev/mmcblk0p2... mmc0: error -110 whilst initialising

By Gary Thomas · #5804 ·

Re: 1.2 changelog

I was pleasantly surprised when unionfs showed up in the kernel - it is not in the list though.

By Autif Khan <autif.mlist@...> · #5803 ·

1.2 changelog

Hi all, I've examined all of the changes in the git log for 1.2 and prepared a very preliminary changelog of "significant" changes. However the following are still missing: * Changes with a bug

By Paul Eggleton · #5802 ·

Re: should the dev docs match the dev yocto source?

understood. i was just looking at the part of the BSP guide using meta-crownbay as an example, and it kept referring to 3.0 when the development version is already up to 3.2. someone else can

By Robert P. J. Day · #5801 ·

Re: Not booting on BeagleBoard xM 0x2

We are working on several bugs on our reference beagleboard. The problem is that my beagleboard died (a horrible painful death) and the other boards that are directly available to are RevC and they

By Bruce Ashfield <bruce.ashfield@...> · #5800 ·

Re: Porting of specific Kernel/Driver into yocto.

The BSP developer guides show how to extend the yocto kernels, and also have sections on custom/different kernel versions. Have you seen that doc yet ? Or have you seen it, and have specific questions

By Bruce Ashfield <bruce.ashfield@...> · #5799 ·

Re: should the dev docs match the dev yocto source?

Not necessarily. It depends on the target. We haven't moved everything to 3.2 yet. It should probably say something more generic that choosing one of the last two yocto validated kernels is the

By Bruce Ashfield <bruce.ashfield@...> · #5798 ·

Re: Not booting on BeagleBoard xM 0x2

Hi Tomas, <tf+lists.yocto@...> wrote: Looks related to the comment I wrote here: https://bugzilla.yoctoproject.org/show_bug.cgi?id=1892 I have a slightly different failure with yocto 1.2

By Andrea Galbusera · #5797 ·

Not booting on BeagleBoard xM 0x2

Hi, I am trying to get Yocto image built from yesterday's master (Linux-3.0.23-yocto-standard) to boot on the NAND-less version of BeagleBoard xM, but the kernel panics with: -----------------

By Tomas Frydrych <tf+lists.yocto@...> · #5796 ·

Re: How to change the startup application

Just an observation. the FAQ link that Autif did looks like a How Do I, which is the section in the Wiki right after the FAQ. Does that matter to anyone? Jim A On Tue, Apr 3, 2012 at 5:58 PM,

By Jim Abernathy · #5795 ·

should the dev docs match the dev yocto source?

just noticed that BSP guide suggests 3.0 is the preferred linux kernel, while the source itself is now up to 3.2. should those match? this is for *development* streams of both. rday --

By Robert P. J. Day · #5794 ·

Porting of specific Kernel/Driver into yocto.

Hi, I want to build my local kernel/Driver code, not the default one. please help how can i do it ?. any wiki/docs on this?. Best Regards, Om Prakash Pal

By Om Prakash PAL <omprakash.pal@...> · #5793 ·

Re: beta bug? MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS doesn't seem to work right...

No, this is not how the RRECOMMENDS mechanism works. There must be at least a possibility that the item in there exists (i.e., there must be a recipe that has it in its RPROVIDES, PACKAGES or an

By Paul Eggleton · #5792 ·

Can not run Qemu with "runqemu qemux86 " after successful build on the Open Suse 12.1

Hi All , I am getting one error and I am not able to launch Qemu, when I am trying to run Qemu after building the image. Error : yocto@linux-461v:~/poky-1.2_M4.rc1/build>runqemu qemux86

By Ashish Pandey <ashishpandey@...> · #5791 ·

Yocto 1.2 Beta Testing Report

Responses to Yocto 1.2 Beta Test: Q: Which architecture did you choose to build? A: sugarbay Q: How easily were you able to build an image and boot an image? A: I followed the QS step

By Andy Gikling <agikling@...> · #5790 ·

Messages