Hello, I am kinda a noob at this so please bear with me. I am using the sama5d27-wlsom1-ek board for my demo and I am trying to make changes to the device tree. So far I have compiled

Commit a2db4fa127a3347fc6df31f895fb0b552669119e added ${WORKDIR}/deploy-* to PSEUDO_IGNORE_PATHS. This breaks the --strip mode since ${D} is copied to deploy-target-stripped. Use the directory

You're used to poking around things in buildroot, OE doesn't quite like you doing that so much :) You shouldn't really be poking around DEPLOY_DIR without letting the build system know what you're

Hi Richard, Many thanks for the fast answer. I said image, but it was probably not the best word, I just want to make a tarball of the generated image + adding some file in it. Here's the complete

In OE, the equivalent for that is probably the image types code. See http://git.yoctoproject.org/cgit.cgi/poky/tree/meta/classes/image_types.bbclass You can define your own custom image types to

Hi Guys, I am building core-image-sato image. i am facing issue rootfs creation. can anybody know give suggition how we can solve this issue. ERROR: core-image-sato-1.0-r0 do_rootfs:

Include .def files to the -dev package to fix QA Issue: nativesdk-libidn2: Files/directories were installed but not shipped in any package. Signed-off-by: Samuli Piippo <samuli.piippo@...> ---

Hi yall, I’m switching from buildroot to yocto and trying to figure out how to do the equivalent of a POST_BUILD_SCRIPT. Indeed I want to format the images built in a specific format for

Signed-off-by: Khem Raj <raj.khem@...> --- ...-includes-for-glibc-2.34-portability.patch | 39 +++++++++++++++++++ recipes-core/coreutils/coreutils_6.9.bb | 1 + 2 files changed, 40

Hello to everyone, Mguentner fixed the cmake issue: https://github.com/mguentner/cannelloni/issues/35 With this

Refresh patches: 0001-openssh-8.6p1-fips.patch 0001-conditional-enable-fips-mode.patch Signed-off-by: Yi Zhao <yi.zhao@...> --- .../0001-conditional-enable-fips-mode.patch | 38

Yocto Technical Team Minutes, Engineering Sync, for June 29 2021 archive: https://docs.google.com/document/d/1ly8nyhO14kDNnFcW2QskANXW3ZT7QwKC5wWVDg9dDH4/edit == disclaimer == Best efforts are made

Current Dev Position: YP 3.4 M2 Next Deadline: 12th July 2021 YP 3.4 M2 build Next Team Meetings: Bug Triage meeting Thursday July 1st at 7:30am PDT

Hi All, I want to make a recipe for python3-pyqt5 and python3-pyqtwebengine, the problem is that the source doe does not contain setup.py , it contains project.py and configure.py. Is there a

<jester@...> wrote: I was also going to suggest distros. And also, if the concern really is about builds reusing downloads, etc, then by all means configure those different distro

<jester@...> wrote: I agree with everything Josef said, but just wanted to add that if it's just different configurations needed for different images it might be easier to just put the

Hello, What is your output from the ZC702 (USB) serial console? I had similar issue on ZCU102 and debugged my issue: "the U-Boot not showing anything I have debugged to be an issue

Howdy! Am 29.06.2021 um 01:28 schrieb Jonas Vautherin: Yocto chant #1 applies: "Recipe data is local, configuration data is global." Means: the recipe does not see at all which image it is being

i have tried to build yocto image. And it compiled successfully without any error but when am trying to BOOT them it didnt prompt any error message my BBlayer.conf is shown below #

Hello, instead of creating a new variable (don't sure of its possible usefulness), you can use BBMASK or review dependencies between your layer PS: I did a similar answer on your stackoverflow