yocto@lists.yoctoproject.org

Re: Core-image-minimal-initramfs (Second ping)

Hi Bill, There's plenty of information else where on this as it's one of the 'standard' ways of booting. The Yocto documentation focuses more on the Yocto-specific issues, though there are also some

By Chris Tapp · #17069 ·

Re: LLVM cross compiler for PowerPc

llvm is part of meta-oe so you need to add meta-oe layer to your mix and you will have it.

By Khem Raj · #17068 ·

Core-image-minimal-initramfs (Second ping)

Please refer to my question in Volume 8 issue 35. I am very desperate in wanting to use the initramfs in m yoctobuild for an embedded x86 target architecture. I am using Yocto Dylan 9.0.2 for crown

By Bill · #17067 ·

[devroom-managers] [CFP] Testing and Automation Devroom

This track might be interesting for some people. Philip

By Philip Balister · #17066 ·

Re: enable Shark support in JAVA + list of alternative JVM for use in combination with OpenJDK on PowerPC

has anyone tested it on FreeScale PPC platforms. I am sure it will work fine on IBM ppc platforms.

By Khem Raj · #17065 ·

Re: FOSDEM 2014 Embedded dev room CFP

On 07/11/2013 10:11, Paul Eggleton wrote: Hi Paul, I'll be attending FOSDEM this year and could bring some kit along for a demo if there's interest, and table space

By Alex J Lennon <ajlennon@...> · #17064 ·

Error while building BSP

Hi All, I am building the customized BSP for our clients . We have treied to build the BSP . I am getting the following error !!! I have checked the internet connection and

By DineshKumar Varadarajan <DineshKumar.Varadarajan@...> · #17062 ·

Re: Yocto test tools for performance and stability

Hi Dilip, For the 1.5 (dora) release we have added automated runtime testing (on top of QEMU only for now):

By Paul Eggleton · #17061 ·

Re: determining ubi build parameters

Hi Max, <snip> UBI Parameters will generally be present in the machine conf file. In this case: "meta-atmel/conf/machine/at91sam9x5ek.conf" In the build directory, you can find "ubinize.cfg".

By Maxin B. John <maxin.john@...> · #17060 ·

LLVM cross compiler for PowerPc

Hi all, I have ported Java based Opendaylight Controller on PowerPc board and have integrated JAVA on the same Powerpc architecture using meta-java with yocto.By default it cam with Zero port support

By sonia verma <soniaverma9727@...> · #17059 ·

Re: enable Shark support in JAVA + list of alternative JVM for use in combination with OpenJDK on PowerPC

Hi Sonia 2013-11-08 07:43, sonia verma wrote: If you still want to test Shark you need to first build and test LLVM on powerpc. http://llvm.org/ It is wise to build and test LLVM manually on a

By Xerxes Rånby <xerxes@...> · #17063 ·

Re: gcc-cross-canadian-arm: found library in wrong location

It seems we get it every time in our setup. All that is needed is: # bitbake -c cleanall gcc-cross-canadian-arm # bitbake gcc-cross-canadian-arm Thanks. Hans

By Hans Beckérus <hans.beckerus@...> · #17058 ·

Re: enable Shark support in JAVA

Hi Andrew I am not able find LLVM compiler for PowerPc.Due to this I'm not able to integrate JAVA in compiler mode on PowerPc board. Can you suggest any alternative for that.

By sonia verma <soniaverma9727@...> · #17057 ·

Re: Changing Config for linux-raspberrypi

The command that you are modifying is attempting to yank a defconfig out of the kernel source dir and put it in workdir. presumably to allow the standard kernel.bbclass processing to pick it up. If

By Bruce Ashfield <bruce.ashfield@...> · #17056 ·

how do you use core-image-minimal-initramfs in grub?

I need to have an initramfs to run special commands prior to the rootfs being installed. My application must decrypt the rootfs. So I cannot use tpm-luks to open the rootfs LUKS device. I found the

By Bill · #17055 ·

determining ubi build parameters

I have a UBI JFFS file system I just built and flashed onto my at91sam9x5ek board. I think everything built correctly, but I get the following error when booting the device: Scanning device for bad

By Maxwell Bottiger · #17054 ·

Re: Changing Config for linux-raspberrypi

Thanks for that. I'm new to this so still getting to grips with the varibales which control the build system. I decided I'd forget about my append file for the moment and see if I could ammed the

By John Whitmore <arigead@...> · #17053 ·

Re: [meta-measured][PATCH 1/7] trousers: Add libgcc as Runtime dependency

Saul, Awesome patch set. This is the only one I can't figure out. Does tcsd really need libgcc? 'ldd' doesn't say anything about dependencies. I'm sure it's just that I'm not looking in the right

By Philip Tricca <flihp@...> · #17052 ·

Re: should yocto filename references start with a leading slash?

I searched through the YP doc set and removed as many leading slash characters that were being used in pathnames as possible. There are a few "~" characters in some of the very specific examples that

By Rifenbark, Scott M <scott.m.rifenbark@...> · #17051 ·

zImage MLO u-boot.

hello, What is the relation between MLO u-boot.bin & u-boot.img and uimage.&zImage? I have been try to get the module uvcvideo.ko meta-beagleboard is used in Angstrom. I had built

By Edward Vidal <vidal.develone@...> · #17050 ·

Messages