Signed-off-by: Armin Kuster <akuster808@...> -- V2] Only need expect-native Clean up PACKAGECONFGI[gnutils] to conform to spec --- meta-tpm/recipes-tpm/swtpm/swtpm_0.6.1.bb | 4 ++-- 1 file

I am having trouble getting the Waveshare 2-CH CAN HAT working with an RPI4. Channel 0 does not come up, channel 1 does, but it will only send one message (eventually reporting "write: No buffer space

Since the recent patch to switch to UUIDs [0aa5e600: "use uuid instead of hard-coding root device"] wic fstab-update is not able to get the correct value for the used device anymore and falls to the

Greetings ! I could able to add Mosquitto in Yocto Zeus , but as default websockets is disabled in Mosquitto . Can anyone help me how to enable websockets in Mosquitto in yocto zeus. Thanks in Advance

Dear Team, I'm using poky-hardknotte for building the image for rpi4, here my need is to add one desktop and a Firefox browser with it, I built xfce desktop and it's working fine, but when I'm adding

Hai All, I wanted to use a GPIO to put the SOM into sleep mode and again use it to wake it up from the sleep. I used the below node to configure the SOM to use the GPIO1 18 to wake up from sleep.

Hi Stephen, I managed to miss some of the output to ip -s -d link show can0, which should have shown: 3: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10 link/can

Wiki: https://wiki.yoctoproject.org/wiki/Bug_Triage Attendees: Alex, Diane, Joshua, Michael, Oleksiy, Randy, Richard, Ross, Saul, Stephen, Steve, Tim, Trevor ARs: -

good catch. yeah, there should only be 4. -armin

expect-native only fixes the build issue.

The SDKs are designed around having a single toolchain and sysroot, so the answer is no. You need to make two SDKs from two build trees. Alex

Hi, I'm quite new with yocto project and i did not find the answer from manual. Currently I have project, where i can make SDK with ARM binaries and those works fine. Now i have faced the situation

I am looking at getting one of these so do not have final answers. However looking

Hi, I have been working on the audio driver. I am trying to access codec driver (TLV320AIC3104) connected to iMX8M over I2C3 and SAI2 lines. While checking for modprobe and modinfo of i2c driver, I'm

I am trying to get a Waveshare CAN interface[1] running on an RPi4 using meta-raspberrypi with hardknott. I have added ENABLE_SPI_BUS = “1” and ENABLE_DUAL_CAN = “1” to my local.conf and see

Hello! When I compiled grub-0.97 of meta-gplv2 on X86, I failed in the do_configure phase. Can you help me solve this problem? Thank you. Cheers, Zang Ruochen | checking whether

Dear all, The next Yocto Project (virtual) Summit will take place on Nov 30 - Dec 2, 2021. While we are finalizing the registration tools, we've already opened the CFP, and we are, as always, looking

Hi, Is it possible to set systemd environment variables from a recipe to do the same as 'systemctl set-environment SOME_ENV_VAR'?

Thanks, this also works for target image. For SDK image, turns out we have to change the line: RDEPENDS_${PN}-dev += "${PN}-staticdev" to RDEPENDS_${PN}-dev += "${PN}-dev" to include the header

Hi Tim, Thanks, that’s got it going. I was close, but didn’t quite cast the correct spell ;-) Next is to work out why the display is black when I create a window... -- Chris