yocto@lists.yoctoproject.org

Re: Call for help for demo UPNP media renderer

gstreamer? think elements appear still They have now. Definitely related, rygel launches without segfault now. It doesn't explicitly specify which elements are required at build time and for

By Joshua Lock <josh@...> · #41 ·

Re: Call for help for demo UPNP media renderer

It is my udnerstanding that we plan to run both the renderer and the gupnp-av-cp on each "player". That is an ARM BeagleBoard and a PowerPC *unknown* board. Each will have a suitable display. Is this

By Darren Hart <dvhart@...> · #42 ·

Re: Call for help for demo UPNP media renderer

I guess Josh may go to bed now. :-) btw, Darren, do we have to use real boards for the exercise? We don't have those boards in PRC. Any limitations to use Qemu environments as the alternative in our

By Tian, Kevin <kevin.tian@...> · #43 ·

Re: Call for help for demo UPNP media renderer

Oops, we do have netbooks which I forgot. :-) Thanks Keivn

By Tian, Kevin <kevin.tian@...> · #44 ·

Re: Call for help for demo UPNP media renderer

For testing the images, you can use all x86 hardware. I'd prefer we not use QEMU as it is likely to complicate the networking, which is rather integral to this demo. No documented steps yet, just

By Darren Hart <dvhart@...> · #45 ·

Re: Call for help for demo UPNP media renderer

Joshua Lock wrote: I will try your branch, however I didn't find josh/demo in poky-contrib. Is it reside in other place? Thanks, Dongxiao

By Xu, Dongxiao <dongxiao.xu@...> · #46 ·

Re: Call for help for demo UPNP media renderer

It should be here: ssh://git@.../meta-demo.git Tom

By Tom Zanussi <tom.zanussi@...> · #47 ·

Re: Call for help for demo UPNP media renderer

Zanussi, Tom wrote: Got it, thanks! Dongxiao

By Xu, Dongxiao <dongxiao.xu@...> · #48 ·

Re: Call for help for demo UPNP media renderer

I just built out the poky-image-rygel image with your meta-demo layer, and run rygel --gst-debug-level=5 I still saw it "segmentation fault" in the last... I am looking into

By Xu, Dongxiao <dongxiao.xu@...> · #49 ·

Re: Call for help for demo UPNP media renderer

Hi Josh, Today I took a glance at the rygel crash issue in poky. Though I didn't get the root cause, I found when configure Tracker plugin into rygel, the segmentation fault will happen. Since we

By Xu, Dongxiao <dongxiao.xu@...> · #50 ·

Re: Call for help for demo UPNP media renderer

Yes, I thought I mentioned disabling the tracker plugin in an earlier mail? I'll prepare a patch to the recipe to disable that so we don't have to remember to do that by hand. Cheers, Joshua --

By Joshua Lock <josh@...> · #51 ·

Re: Call for help for demo UPNP media renderer

Joshua Lock wrote: Ah, oops. I didn't read your previous mail carefully... But luckily it didn't cost too much time. :-) Thanks, Dongxiao

By Xu, Dongxiao <dongxiao.xu@...> · #52 ·

Re: New issue with git fetcher?

I tried "bitbake poky-image-sdk -c fetchall" both with an existing source directory and with a fresh new download. Everything works fine. Thanks Kevin

By Tian, Kevin <kevin.tian@...> · #53 ·

Re: [PULL] at: Non root install patch is not necessary (Bug 246)

Hi Richard, I have re-fixed this bug, please check it, thank you~ meta/recipes-extended/at/at_3.1.12.bb | 2 meta/recipes-extended/at/files/nonrootinstall.patch | 75

By Mei, Lei <lei.mei@...> · #54 ·

Re: [PULL] at: Non root install patch is not necessary (Bug 246)

Thanks, much better. One more small thing though - could you add a header to the patch with a description of what it does, why and who made the change. In this case its fairly obvious but its a good

By Richard Purdie <rpurdie@...> · #55 ·

Release checklist

Coming up to launch there are going to be some technical things that need to be done, I'm aiming to write these down and assign owners so we remember them all and that they all happen: * Remove

By Richard Purdie <rpurdie@...> · #56 ·

Re: New issue with git fetcher?

Thanks for testing and the feedback! Cheers, Richard

By Richard Purdie <rpurdie@...> · #57 ·

Re: Release checklist

Richard Purdie wrote: Quick question which I think Scott R needs the URLs for his user manual, so the eclipse plugin will be: http://yoctoproject.org/downloads/Eclipse-Plugin/ What about everything

By Zhang, Jessica · #58 ·

Re: Release checklist

This should be ScottG also.

By Saul Wold <saul.wold@...> · #59 ·

Re: Release checklist

While not exactly technical, these should be tracked as well: * post announcement email to LWN [RP or DH] * post announcement email to... (where else?) * prior to announcement distribute Q&A inside

By Dirk Hohndel <hohndel@...> · #63 ·

Messages