This is valid; I would recommend setting them within the function though (e.g. do_configure) rather than at the recipe level, assuming that works for your case. Cheers, Paul -- Paul

Hi, Rifenbark, Scott M wrote, On 19.07.2012 16:39: As I suspected I didn't encounter any problems generating eclipse help documentation from all documentation parts (dev-manual, kernel-manual, ...).

FYI: everything is staged and I have a SRCREV commit prepared for this. When I hear a clear "yes" on the userspace changes, I can send the pull request immediately. Cheers, Bruce

From: Tom Zanussi <tom.zanussi@...> With the move to linux-yocto-3.4, linux-yocto-3.0 support can be removed. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

From: Tom Zanussi <tom.zanussi@...> Switch jasperforest to the 3.4 kernel and update kernel SRCREVs. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

From: Tom Zanussi <tom.zanussi@...> Switch chiefriver to the 3.4 kernel and update kernel SRCREVs. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

From: Tom Zanussi <tom.zanussi@...> This switches the chiefriver and jasperforest BSPs to linux-yocto-3.4 and removes the jasperforest linux-yocto-3.0 support. The following changes since

This lets meta-intel to play well in multi-bsp setup Signed-off-by: Khem Raj <raj.khem@...> --- common/recipes-multimedia/libva/va-intel.bb | 1 + 1 files changed, 1 insertions(+), 0

Validated on real hardware: U-Boot 2012.04.01 (Jun 29 2012 - 13:48:03)MPC83XX Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c3, MPC8315E, Rev: 1.2

The linux-yocto git repositories contain both Linux kernel sources as well as the meta-data used to prepare the BSP specific source branches and assemble the kernel config file. Much of this

Hello, Here are the results for the Full Pass testing on 1.3 M2 build with commit id:eb0cb7e8234f5d2e5623406e9660be91cf52f65e For HOB testing the commit id is:

On Thu, Jul 19, 2012 at 3:33 PM, James Abernathy <jfabernathy@...> wrote: This does not happen on Denzil 7.0.1 tarball. Jim A

I failed to mention this is on the denzil branch of both poky and meta-intel. JIm A

Something that got pushed recently has broken the tools. To keep the debug simple, I went back and tried to just build an old stable platform, the n450. Below is the error: NOTE: Unpacking

Hi, I am writing a recipe to build a driver specific for my BSP. The driver needs a bunch of environmental variables to be set ( specific to driver only ) to build. Right now to move

I think this is the same problem as 1.10 - you shouldn't have to pull in the -dev package to get those two .so files, which are in the emgd-bin-2443-1.10.i586.rpm and not the -dev

This patch fixes some minor comment mistakes. Signed-off-by: Marc Ferland <ferlandm@...> --- psplash-colors.h | 2 +- psplash-console.c | 2 +- psplash-console.h | 2 +-

Hello It appears that I do not have twm or xterm. xterm term was not installed on the host fedora17 and I thought why it was not working. reverted to the a ver I had built earlier this

Right, but what if we have to update the meta SRCREV for a different reason in the meantime (like we did last week for instance). We're then forced to take the emgd commit as well. In any case, it's