From: Eilís Ní Fhlannagáin <elizabeth.flanagan@...> This set of patches relates to what I discussed at https://lists.yoctoproject.org/g/yocto/message/55285. Four major issues (and one

Peter, Ross Thanks for your replies. This all makes perfect sense then. Thanks again Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

Hi, No they are not mandatory for all fetchers. They are only used for content downloaded from non-local archives.

<michael.opdenacker@...> wrote: Checksums are for files that are fetched via http:// and friends, not local files. Ross

Greetings, I reused a simple "hello" recipe and added a non-matching checksum to it: ... SRC_URI = "file://helloworld.c" SRC_URI[md5sum] = "34f0efd76b4f18888888888833cdd129" ... The rest of the

Hi Tomasz, Thanks for your response. Yes, but the Zeus build image uses the same device tree that could run WiFi connection without any issues, I am comparing the same source and configuration

Hi JH, Are you using custom Linux kernel / custom device tree? Maybe there is some issue there? Kind regards, Tomasz Żyjewski Embedded Systems Engineer GPG: 5C495EA3EBEECA59 https://3mdeb.com |

Signed-off-by: Anuj Mittal <anuj.mittal@...> --- config.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config.py b/config.py index 4c0b83b..0f99557 100644 ---

Hi Rudolf, Thanks for your response and comments. Not that bad, the WiFi interfaces was fine, but it could not get dhcp response and IP address so an automatic private IP address 169.254

perhaps gdb-cross-${TARGET_ARCH} would be more generic.

Thanks for the feedback. Done on https://www.yoctoproject.org/community/mailing-lists/ I added lore.kernel.org links when applicable, and also added the openembedded-devel mailing list which was

Just a short hint if you didn’t discover it yourself, there is a (very) old BSP available from PHYTEC [1]. The downloads don’t seem to work, but they’re available on a probably forgotten FTP

Current Dev Position: YP 3.5 M2 Next Deadline: 17th Jan. 2022 YP 3.5 M2 build Next Team Meetings: Bug Triage meeting Thursday Jan. 20th 7:30 am PDT

Hi JH, Yes, I have, but with Network Manager instead of connman. WiFi works just fine. There are a lot of pieces in the chain and it is not obvious from your description where it is broken. If you run

Follow up on this thread: I've been kindly helped by kroon on #yocto. The trick consists in adding a build-time dependency to gdb-cross-aarch64 in my recipe: DEPEND = "gdb-cross-aarch64" At this

Sounds fine to me. Cheers, Richard

Hi, Has anyone successfully built a Linux image by Honister to run WiFi driver, connman and wpa_supplicant for WiFi interface? I could build an image by Zeus to run WiFi driver,

Greetings, I see more and more people using links to the lore.kernel.org archives, for example the ones for this list: https://lore.kernel.org/yocto/ These look more convenient to use than the ones

Was wondering if there was a way to edit the distitils3.bbclass or a similar file to only install the python .pyc files onto a yocto image? I saw something about editing the

All, The below were the owners of enhancements or bugs closed during the last