Sorry, I meant to add that I have tried adding the following to local.conf: RPI_EXTRA_CONFIG = ' \n \ dtparam=spi=on \n \ dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25 \n \

unversioned symlinks should not be used they are there to be used for linking during build time. Unless you need to do builds on targets you really do not need them so explain you usecase. Are you

Hi, When I build a yocto image, I added some packages into IMAGE_INSTALL, such as boost, thrift, etc. I notice in the target OS image, the shared libs don't the symlinks. But in the SDK image, the

Thank

swtpm no longer depends on Python[1] so the dependencies have been removed. "inherit perlnative" has been added due to (in oe-core): deda455b3c ("bitbake.conf: drop pod2man from hosttools") Some

Please do, that sounds great. -armin

Hi everybody! I successfully built an image for an ARM based system running a PostgreSQL server and client by adding the packages "postgresql" and "postgresql-client". However, so far I failed to make

Den Fri, Oct 01, 2021 at 15:25:17 -0700 skrev Armin Kuster: Hi Armin Support for RRECOMMENDS in the PACKAGECONFIG was added some years ago[1][2]. Whatever they should be RRECOMMENDS or RDEPENDS I'm

Signed-off-by: Armin Kuster <akuster808@...> -- V2] Only need expect-native Clean up PACKAGECONFGI[gnutils] to conform to spec --- meta-tpm/recipes-tpm/swtpm/swtpm_0.6.1.bb | 4 ++-- 1 file

I am having trouble getting the Waveshare 2-CH CAN HAT working with an RPI4. Channel 0 does not come up, channel 1 does, but it will only send one message (eventually reporting "write: No buffer space

Since the recent patch to switch to UUIDs [0aa5e600: "use uuid instead of hard-coding root device"] wic fstab-update is not able to get the correct value for the used device anymore and falls to the

Greetings ! I could able to add Mosquitto in Yocto Zeus , but as default websockets is disabled in Mosquitto . Can anyone help me how to enable websockets in Mosquitto in yocto zeus. Thanks in Advance

Dear Team, I'm using poky-hardknotte for building the image for rpi4, here my need is to add one desktop and a Firefox browser with it, I built xfce desktop and it's working fine, but when I'm adding

Hai All, I wanted to use a GPIO to put the SOM into sleep mode and again use it to wake it up from the sleep. I used the below node to configure the SOM to use the GPIO1 18 to wake up from sleep.

Hi Stephen, I managed to miss some of the output to ip -s -d link show can0, which should have shown: 3: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10 link/can

Wiki: https://wiki.yoctoproject.org/wiki/Bug_Triage Attendees: Alex, Diane, Joshua, Michael, Oleksiy, Randy, Richard, Ross, Saul, Stephen, Steve, Tim, Trevor ARs: -

good catch. yeah, there should only be 4. -armin

expect-native only fixes the build issue.

The SDKs are designed around having a single toolchain and sysroot, so the answer is no. You need to make two SDKs from two build trees. Alex

Hi, I'm quite new with yocto project and i did not find the answer from manual. Currently I have project, where i can make SDK with ARM binaries and those works fine. Now i have faced the situation