yocto@lists.yoctoproject.org

[meta-tpm][v2][PATCH] swtpm: fix build issues of missing expect

Signed-off-by: Armin Kuster <akuster808@...> -- V2] Only need expect-native Clean up PACKAGECONFGI[gnutils] to conform to spec --- meta-tpm/recipes-tpm/swtpm/swtpm_0.6.1.bb | 4 ++-- 1 file

By Armin Kuster · #54928 ·

Meta-raspberrypi - how to configure device tree for MCP251x

I am having trouble getting the Waveshare 2-CH CAN HAT working with an RPI4. Channel 0 does not come up, channel 1 does, but it will only send one message (eventually reporting "write: No buffer space

By Chris Tapp · #54927 ·

[meta-rockchip][PATCH] rockchip.wks: use uuid for /boot during fstab-update

Since the recent patch to switch to UUIDs [0aa5e600: "use uuid instead of hard-coding root device"] wic fstab-update is not able to get the correct value for the used device anymore and falls to the

By Markus Volk · #54926 ·

Re: Enabling Websockets in Mosquitto in yocto zeus #zeus

Greetings ! I could able to add Mosquitto in Yocto Zeus , but as default websockets is disabled in Mosquitto . Can anyone help me how to enable websockets in Mosquitto in yocto zeus. Thanks in Advance

By Poornesh G · #54925 ·

How to add Firefox with Yocto build for RPI4.

Dear Team, I'm using poky-hardknotte for building the image for rpi4, here my need is to add one desktop and a Firefox browser with it, I built xfce desktop and it's working fine, but when I'm adding

By @prashant2314 · #54924 ·

How to enable and disable device tree node at runtime from linux userspace #dunfell

Hai All, I wanted to use a GPIO to put the SOM into sleep mode and again use it to wake it up from the sleep. I used the below node to configure the SOM to use the GPIO1 18 to wake up from sleep.

By james@... · #54923 ·

Re: Meta-respberrypi socketcan - how do I bring up the interfaces?

Hi Stephen, I managed to miss some of the output to ip -s -d link show can0, which should have shown: 3: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10 link/can

By Chris Tapp · #54922 ·

Minutes: Yocto Project Weekly Triage Meeting 9/30/2021

Wiki: https://wiki.yoctoproject.org/wiki/Bug_Triage Attendees: Alex, Diane, Joshua, Michael, Oleksiy, Randy, Richard, Ross, Saul, Stephen, Steve, Tim, Trevor ARs: -

By Trevor Gamblin · #54921 ·

Re: [meta-security][PATCH] swtpm: update to 0.6.1

good catch. yeah, there should only be 4. -armin

By Armin Kuster · #54920 ·

Re: [meta-security][PATCH 2/2] swtpm: fix build issues of missing expect

expect-native only fixes the build issue.

By Armin Kuster · #54919 ·

Re: Both x86 and ARM binaries in building phase

The SDKs are designed around having a single toolchain and sysroot, so the answer is no. You need to make two SDKs from two build trees. Alex

By Alexander Kanavin · #54918 ·

Both x86 and ARM binaries in building phase

Hi, I'm quite new with yocto project and i did not find the answer from manual. Currently I have project, where i can make SDK with ARM binaries and those works fine. Now i have faced the situation

By sepsukkadaa@... · #54917 ·

Re: Meta-respberrypi socketcan - how do I bring up the interfaces?

I am looking at getting one of these so do not have final answers. However looking

By Stephen John Smoogen · #54916 ·

kernel debugging in yocto image #linux #make #yocto #cmake #kernel

Hi, I have been working on the audio driver. I am trying to access codec driver (TLV320AIC3104) connected to iMX8M over I2C3 and SAI2 lines. While checking for modprobe and modinfo of i2c driver, I'm

By Amrun Nisha.R · #54915 ·

Meta-respberrypi socketcan - how do I bring up the interfaces?

I am trying to get a Waveshare CAN interface[1] running on an RPi4 using meta-raspberrypi with hardknott. I have added ENABLE_SPI_BUS = “1” and ENABLE_DUAL_CAN = “1” to my local.conf and see

By Chris Tapp · #54914 ·

[meta-gplv2]grub-0.97 configure failed in x86

Hello! When I compiled grub-0.97 of meta-gplv2 on X86, I failed in the do_configure phase. Can you help me solve this problem? Thank you. Cheers, Zang Ruochen | checking whether

By zangrc · #54913 ·

CFP is now open for the next Yocto Project Summit 2021.11

Dear all, The next Yocto Project (virtual) Summit will take place on Nov 30 - Dec 2, 2021. While we are finalizing the registration tools, we've already opened the CFP, and we are, as always, looking

By Nicolas Dechesne <nicolas.dechesne@...> · #54912 ·

#systemd #systemd

Hi, Is it possible to set systemd environment variables from a recipe to do the same as 'systemctl set-environment SOME_ENV_VAR'?

By mrkozmic@... · #54911 ·

Re: googletest shared library

Thanks, this also works for target image. For SDK image, turns out we have to change the line: RDEPENDS_${PN}-dev += "${PN}-staticdev" to RDEPENDS_${PN}-dev += "${PN}-dev" to include the header

By Lijun Chen · #54910 ·

Re: Enabling tk for Python tkinter module

Hi Tim, Thanks, that’s got it going. I was close, but didn’t quite cast the correct spell ;-) Next is to work out why the display is black when I create a window... -- Chris

By Chris Tapp · #54909 ·

Messages