yocto@lists.yoctoproject.org

Re: spidev.c ?

Not sure if you did represent these values correctly?! I have for enc28j60:something like this: interrupt-parent = <&gpio2>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; Where <&gpio2> is gpio chip name

By Zoran · #52785 ·

Re: How is it possible to build a loadable module from spi-altera.c ...?

My problem is I have an 1553 chip (an avionic data bus) connected to the HPS master (an ARM processor) via an FPGA (soft) SPI controller. This is where the spi-altera.c comes in. It provides the

By jchludzinski · #52784 ·

How is it possible to build a loadable module from spi-altera.c ...?

How is it possible to build a loadable module from spi-altera.c when it has no code for creating udev files (i.e., /dev/spidevXX); it has no: static int __init spidev_init(void) { int status;

By jchludzinski · #52783 ·

Re: spidev.c ?

Using 'make nconfig' I selected the following options: (Keep in mind I using an Altera/Intel Arria 10 SoC which uses DesignWare hard SPI controllers. BUT the SPI controllers I'm concerned with now are

By jchludzinski · #52782 ·

Re: is there a recent explanation of tricks you can play with MACHINEOVERRIDES?

i did write that a while back while i was still figuring it out. :-) i agree that it would be inappropriate in the *regular* sections of the docs, but i'm convinced it would be worth explaining

By Robert P. J. Day · #52781 ·

Re: is there a recent explanation of tricks you can play with MACHINEOVERRIDES?

Hi Robert, Don't use _prepend but =. BEFORE the other includes in your machine configuration files otherwise the order in MACHINEOVERRIDES is incorrect. Do NOT use append, or .=, they result in

By Quentin Schulz · #52780 ·

[meta-security][PATCH 2/2] swtpm: update to 0.5.2

Add python package Signed-off-by: Armin Kuster <akuster808@...> --- .../swtpm/{swtpm_0.2.0.bb => swtpm_0.5.2.bb} | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)

By Armin Kuster · #52779 ·

[meta-security][PATCH 1/2] tpm2-tss-engine: update 1.1.0

LIC_FILES_CHKSUM hash changed between branches. Signed-off-by: Armin Kuster <akuster808@...> --- .../{tpm2-tss-engine_1.0.1.bb => tpm2-tss-engine_1.1.0.bb} | 6 +++--- 1 file changed, 3

By Armin Kuster · #52778 ·

Re: does current bitbaking of core-image-minimal still need docbook stuff?

it appears (after a *very* cursory investigation) that shared-mime-info-native is included, which drags in xmlto-native, which then drags in docbook stuff. i'll confirm that later. rday

By Robert P. J. Day · #52777 ·

Re: does current bitbaking of core-image-minimal still need docbook stuff?

Met vriendelijke groet / kind regards, Mike Looijmans System Expert TOPIC Embedded Products B.V. Materiaalweg 4, 5681 RJ Best The Netherlands T: +31 (0) 499 33 69 69 E:

By Mike Looijmans · #52776 ·

Re: does current bitbaking of core-image-minimal still need docbook stuff?

most likely, but as i'm explicitly not installing any documentation, i'm now poking around to see what insists on building that for no apparent reason. rday

By Robert P. J. Day · #52775 ·

Re: does current bitbaking of core-image-minimal still need docbook stuff?

It's not related to yp-docs at least. most likely some recipes that use docbook for their docs/man pages, no?

By Nicolas Dechesne <nicolas.dechesne@...> · #52774 ·

is there a recent explanation of tricks you can play with MACHINEOVERRIDES?

years ago, i asked about how to support a small set of closely-related targets using MACHINEOVERRIDES to define how to apply patches in a (somewhat) hierarchical

By Robert P. J. Day · #52773 ·

does current bitbaking of core-image-minimal still need docbook stuff?

testing building qemuarm64 core-image-minimal from scratch, and noticed it fetching for docbook-xml and docbook-xsl stuff ... is there something that still needs docbook support? i'm about to take a

By Robert P. J. Day · #52772 ·

Avahi in yocto #yocto

Hello Guys i have installed avahi-0.8 version using gatesgarth version, its compiled successfully but i am facing an issue with TriggeredBy: [[0;1;32m●[[0m avahi-daemon.socket, when i restart my

By lavkhush2208@... · #52771 ·

Re: spidev.c ?

Hello John, It seems that your target is configured correctly. Since you have all the components you should and must have as SPI framework. Namely I was looking for /sys/bus (since you must have an

By Zoran · #52770 ·

Re: spidev.c ?

But there are NO udev files for the SPI devices defined in the DTSI file. On 2021-03-18 17:12, jchludzinski via lists.yoctoproject.org wrote:

By jchludzinski · #52769 ·

Re: spidev.c ?

That's with: root@arria10:~# lsmodModule Size Used byspi_altera 16384 0spidev 20480 0 On 2021-03-18 17:07, jchludzinski via lists.yoctoproject.org

By jchludzinski · #52768 ·

Re: spidev.c ?

root@arria10:~# find /sys/ -name

By jchludzinski · #52767 ·

Re: [meta-security][PATCH] ima-evm-keys: add file-checksums to IMA_EVM_X509

merged, thanks

By Armin Kuster · #52766 ·

Messages