Hi All, We are planning to move to New yocto from current one that is krogoth yocto to some updated one. We are not thinking to move to gates-garth or some other major release but the releases than

Hi, I am using TI based processor for our custom project. We are using NAND as our Boot media. The type of the File system we opted is JFFS2. The following lines I have

Hi, Please see my comments in-line. I assume your sources are in /ede/tms/yocto/zeus/downloads/ Can you please try without the PATH at the end? The manual does not mention anything like PATH at

not sure why that wouldn't work, it's what i've used for years. rday

I am trying to setup PREMIRRORS to setup and point to the directory containing all the tar-balls for my build… I was under the impression that the “SOURCE_MIRROR_URL” is a quick way to add a

Just to close this: it seems like the gcc-cross-arm used by yocto gatesgarth is too new for that specific downstream kernel (3.18.31). The goal was to get a proper BSP package for this device for a

Upstream OE Core has moved to Kernel 5.10 which fixed this problem, so remove the patch for 5.8 Signed-off-by: Joshua Watt <JPEWhacker@...> --- ...-resolve-supply-after-creating-regul.patch |

Splits out the three variants of the rock-pi-4 (A, B & C) into their own machines. Unfortunately, it is not possible to have a single machine that works for all three, as there isn't any known ways

Thanks a lot for the answer! It seems like using `KCONFIG_MODE = "--alldefconfig"` with `KBUILD_DEFCONFIG = "msm8909_defconfig"` now ends up with the same kind of errors as when I use the defconfig

I think setting `KBUILD_DEFCONFIG = "msm8909_defconfig"` is likely the correct approach here. What you may be missing though is the correct value for KCONFIG_MODE. By default, the supplied defconfig

As a learning experience, I am trying to create a BSP for a device I own and whose downstream kernel is published. The device in question is the Parrot Skycontroller3, and the sources are available

<robert.berger.yocto.user@...> wrote: I'd say video content for FOSDEM should be around the level of the things we'd show on the stand, short demos or introductions which can be understood by

Hi Olivier, Thanks for your implication :) I think the modification you want to make resides in the npm class

Hi, I m working on the yocto project. I can be able to create image (core-image-base) and u-boot (imx-boot-sd.bin). I can able to boot these images from the sdcard. But I want to boot u-boot from eMMC

Hey, We’ve upgraded to zeus some time ago and also updated some of our recipes around node-red and it’s nodes. Before I created my own class to easily fetch several nodes, now we used devtool to

write a gstreamer1.0-plugins-bad_%.bbappend with PACKAGECONFIG_append = " aom" Then add gstreamer1.0-plugins-bad-aom to IMAGE_INSTALL <maaloulsafouane@...> wrote:

Hello, I wanted to know how to add Alliance for Open Media - AV1 Codec Library (aom-plugins) gstreamer1.0-plugins-bad recipe to my image ? the Alliance for Open Media - AV1 Codec Library are in the

Hi Paul, I will be happy to help with this task as a volunteer for a couple of hours during FOSDEM 2021. Best regards, Leon -- Leon Anavi Software Engineer konsulko.com

Im experimenting with the kernel's defconfig. Added these: USB_NET_HUAWEI_CDC_NCM=m USB_NET_DRIVERS=y USB_USBNET=y and I'm recompiling the kernel: bitbake -f linux Takes some time... -- Zolee