Hi Randy, <randy.macleod@...> wrote: I have done some small changes and now have tensorflow from master working on top of dunfell. Would you be interested in sharing changes back and

Hello folks, i am trying to compile my image but we could see that i am missing neon fpu in my image. I can't use this feature because i have a raspberry pi zero w and i have armv6 on this

Hi, If I intentionally typo in the defconfig file: USB_NET_HUAWEI_CDC_NCM_cat=y USB_NET_DRIVERS=y USB_USBNET=y The bitbake -f linux command doesn't recognize the change. It means to me that any change

Hi, My comments are in-line I would consider it "best practice" to somewhat try to stay up to date with recent yocto versions and plan for this from the beginning of your project. What I mean is to

Hey, I figured to squeeze in a test and it seems that this is solved in Dunfell, at least I can’t trigger it even when trying and the folder structure used in the work directory has changed ->

Hi, I'd start by looking at the relevant documentation section, https://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#general-migration-considerations. There you can also find a

Hi all, Intel and WR YP QA is planning for QA execution for YP build yocto-3.3_M2.rc1. We are planning to execute following tests for this cycle: OEQA-manual tests for following module: 1.

Hi All, We are planning to move to New yocto from current one that is krogoth yocto to some updated one. We are not thinking to move to gates-garth or some other major release but the releases than

Hi, I am using TI based processor for our custom project. We are using NAND as our Boot media. The type of the File system we opted is JFFS2. The following lines I have

Hi, Please see my comments in-line. I assume your sources are in /ede/tms/yocto/zeus/downloads/ Can you please try without the PATH at the end? The manual does not mention anything like PATH at

not sure why that wouldn't work, it's what i've used for years. rday

I am trying to setup PREMIRRORS to setup and point to the directory containing all the tar-balls for my build… I was under the impression that the “SOURCE_MIRROR_URL” is a quick way to add a

Just to close this: it seems like the gcc-cross-arm used by yocto gatesgarth is too new for that specific downstream kernel (3.18.31). The goal was to get a proper BSP package for this device for a

Upstream OE Core has moved to Kernel 5.10 which fixed this problem, so remove the patch for 5.8 Signed-off-by: Joshua Watt <JPEWhacker@...> --- ...-resolve-supply-after-creating-regul.patch |

Splits out the three variants of the rock-pi-4 (A, B & C) into their own machines. Unfortunately, it is not possible to have a single machine that works for all three, as there isn't any known ways

Thanks a lot for the answer! It seems like using `KCONFIG_MODE = "--alldefconfig"` with `KBUILD_DEFCONFIG = "msm8909_defconfig"` now ends up with the same kind of errors as when I use the defconfig

I think setting `KBUILD_DEFCONFIG = "msm8909_defconfig"` is likely the correct approach here. What you may be missing though is the correct value for KCONFIG_MODE. By default, the supplied defconfig

As a learning experience, I am trying to create a BSP for a device I own and whose downstream kernel is published. The device in question is the Parrot Skycontroller3, and the sources are available

<robert.berger.yocto.user@...> wrote: I'd say video content for FOSDEM should be around the level of the things we'd show on the stand, short demos or introductions which can be understood by