yocto@lists.yoctoproject.org

Re: insmod - huawei E3372h kernel module

Hi, I managed to bitbake with these: http://paste.ubuntu.com/p/4W2525MQDj/ http://paste.ubuntu.com/p/VT3zyhy7h2/ I'm very curious how it behaves on the hardware -- Zolee

By Zoltan Kerenyi Nagy · #51937 ·

Re: insmod - huawei E3372h kernel module

Hi, Makefile:huawei_cdc_ncm-y := huawei_cdc_ncm.o obj-m += huawei_cdc_ncm.oKDIR ?= /lib/modules/`uname -r`/buildall: make -C $(KDIR) M=$(PWD) modulesclean: make -C $(KDIR) M=$(PWD)

By Zoltan Kerenyi Nagy · #51936 ·

Re: Unable to extract tar file #dunfell #yocto

<vijayrakeshmunganda@...> wrote: What I mean is, do you see the file "libopentok_linux_llvm_arm64-2.18.1.tgz" itself under ${WORKDIR}? i.e. has it been copied instead of extracted? Also, please

By Paul Barker · #51935 ·

Re: Unable to extract tar file #dunfell #yocto

Hi, S = "${WORKDIR}/libopentok_linux_llvm_arm64" This is the root directory of your archive and should be used for `S` Cheers, Quentin

By Quentin Schulz · #51934 ·

Re: Unable to extract tar file #dunfell #yocto

Hi Paul Barker, No, ${WORKDIR}/tokbox directory is empty, it is not getting placed. I can only see it in the downloads directory. I'm Yocto Project Dunfell version. Thanks, Vijay Rakesh.

By Vijay Rakesh Munganda · #51933 ·

Re: Unable to extract tar file #dunfell #yocto

<vijayrakeshmunganda@...> wrote: Does the .tgz file get placed in ${WORKDIR} without being extracted? Also, which Yocto Project version/branch are you using? Thanks, -- Paul Barker Konsulko

By Paul Barker · #51932 ·

Re: How to select Linux kernel version?

Hi Jupiter, [...] [...] Not sure this will fly nicely (the kernel headers being older than your kernel). Otherwise ok. And here we have the winner :) You don't have a 5.10 linux-yocto recipe so

By Quentin Schulz · #51931 ·

Re: Unable to extract tar file #dunfell #yocto

Hi Zoran, Thanks for the reply. The reason behind CMakeLists.txt does not appear is because tgz file is getting extracted into the source folder, it is empty when I checked. My recipe is unable to

By Vijay Rakesh Munganda · #51930 ·

Re: Unable to extract tar file #dunfell #yocto

Just maybe... This web pointer can help

By Zoran · #51929 ·

Re: Unable to extract tar file #dunfell #yocto

Anyone, please suggest. Thanks, Vijay Rakesh

By Vijay Rakesh Munganda · #51928 ·

Re: How to select Linux kernel version?

Thanks Quentin, here are results: $ bitbake -e virtual/kernel | grep -e

By JH · #51927 ·

Suggestions on improvements

Hello everyone, I'm trying to improve the Yocto Project's license tracing based on a proof-of concept implementation of linking sources with SPDX headers to output files by Richard at

By Meh Mbeh Ida Delphine <idadelm@...> · #51926 ·

Re: [meta-tensorflow][PATCH 8/25] tensorflow-estimator: 1.13 -> 2.4

Hi Marek, Is it: A) Comes from master and is a problem on dunfell or B) it is reproducible on the master branch? Given that you said: I suspect it's A only. Right? What are your small

By Randy MacLeod · #51925 ·

Re: [meta-tensorflow][PATCH 8/25] tensorflow-estimator: 1.13 -> 2.4

HI Randy, <randy.macleod@...> wrote: Yes this comes from master branch. BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko -

By Marek Belisko · #51924 ·

Re: insmod - huawei E3372h kernel module

Quite an opposite. It must be defined to be exported, and to appear in Module.symvers . If it is NOT defined as exported (EXPORT_SYMBOL, EXPORT_SYMBOL_GPL), it will behave as from your initial post,

By Zoran · #51923 ·

Re: [meta-tensorflow][PATCH 8/25] tensorflow-estimator: 1.13 -> 2.4

Marek, Does this happen if you use the master branch? Hongxu, Any tips for Marek? ../Randy > -- # Randy MacLeod # Wind River Linux

By Randy MacLeod · #51922 ·

Re: insmod - huawei E3372h kernel module

If I think more... For driver development the Out Of (OOT) Tree driver is a must, and so far the most efficient way is to have native tool environment presence on the target, so the quick

By Zoran · #51921 ·

Yocto zeus, npm fetcher, bug

Hello, I use yocto version 3.0.3 (zeus) and tried to install some node packages as described in the yocto manual [1]. I experienced that manipulating a sha512 checksum in a package-lock.json file does

By Zimmermann, Anthony · #51920 ·

Re: insmod - huawei E3372h kernel module

No, no... I did not mean in the makefile to change m to y. Please, maybe you can try to set your makefile to lookalike as these

By Zoran · #51919 ·

Re: insmod - huawei E3372h kernel module

Hi Zoran, Thanks, I modified the Makefile: obj-m := huawei_cdc_ncm.o Kconfig (obj-y := huawei_cdc_ncm.o) SRC := $(shell pwd) all: $(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules_install: $(MAKE) -C

By Zoltan Kerenyi Nagy · #51918 ·

Messages