From: Tom Zanussi <tom.zanussi@...> Add md5 and sha256 checksums to the recipe. Signed-off-by: Tom Zanussi <tom.zanussi@...> --- .../psb-firmware/psb-firmware_0.30.bb

From: Tom Zanussi <tom.zanussi@...> Add md5 and sha256 checksums to the recipe. Signed-off-by: Tom Zanussi <tom.zanussi@...> --- .../xserver-xorg-video-psb_0.32.1.bb

From: Tom Zanussi <tom.zanussi@...> Several recipes need checksums, add them. The following changes since commit df18b721f86f0737c0f302e49b27ea232c70e683: meta-intel: add LAYERDEPENDS

From: Tom Zanussi <tom.zanussi@...> Add md5 and sha256 checksums to the recipe. Signed-off-by: Tom Zanussi <tom.zanussi@...> --- .../xorg-xserver/xserver-psb_1.7.99.2.bb

From: Tom Zanussi <tom.zanussi@...> Add md5 and sha256 checksums to the recipe. Signed-off-by: Tom Zanussi <tom.zanussi@...> ---

I am looking at http://www.yoctoproject.org/docs/latest/poky-ref-manual/poky-ref-manual.html#ref-images and agree that we are missing some images. Each image you noted below (except the core-image-rt

When: Tuesday, March 06, 2012 8:00 AM-9:00 AM (UTC-08:00) Pacific Time (US & Canada). Where: Bridge Info Enclosed Note: The GMT offset above does not reflect daylight saving time adjustments.

When: Tuesday, March 06, 2012 8:00 AM-9:00 AM (UTC-08:00) Pacific Time (US & Canada). Where: Bridge Info Enclosed Note: The GMT offset above does not reflect daylight saving time adjustments.

The recommendation here would be to use a separate recipe to produce the intramfs image - we have an example of this in recipes-core/images/core-image- minimal-initramfs.bb. This way you can fully

Hi Praveen, If you want to create bsp, I'd think you need to build a image for the target arch. For Yocto, the build system will use the cross compilation during the build process base on your

Hi, I am very new to Yocto so kindly help. I wish to create bsp for our project in which we are using arm1136 processor. I have created a layer (meta_prj) same as meta for our project and have

Hello Darren, Thanks for the documentation. In this regard I would like to clarify a small doubt. When I bbappend the xserver-xf86-config_0.1 recipe in order to override the default xorg.conf,

Does it boot? I would expect this to be the next test? If you don't have a beagleboard to test if you host it somewhere I can give it quick go later today if I get time. Regards, -- Jack

Hi all This is the weekly test report for Yocto 1.2 M3 RC1 build. There is 5 new bugs found in this testing. Crownbay testing is blocked due to build failure. Build failed when multilib enable.

Hello Darren, I find that the cpio.gz image is created by running the following command inside ${IMAGE_ROOTFS} directory find . | cpio -o -H newc | gzip -c -9 > <name>.rootfs.cpio.gz Which means

Did you have meta-oe in your layer stack? -- Denys

This is an update of the linux-yocto 3.0 and 3.2 SRCREVs to bring in the following updates: - v3.0.23 stable update - v3.2.9 stable update - 3.0/3.2: fri2 updates (pch + configuration

Richard/Saul, The hardware reference platforms need to be updated to the most recent linux-yocto changes in oe-core. The commit message has all the details: This is an update of the linux-yocto 3.0

Hi all, The overall open bug trend increased a lot during last 2 weeks. WDD number and Open Bug number are 819 and 164. QA began 1.2 M3 RC1 testing last week. Bug status of WW09 could be found on

i just finished doing a "bitbake core-image-minimal" for a beagleboard using the meta-ti layer, and having only to set a preferred version for udev. the build finished (albeit with a few