Correct, I can also confirm the backport works in getting it compiled. Thanks. On 28-09-2020 18:53, Martin Jansa wrote:

I was able to reproduce this in one of my build setups and confirm that backporting this commit helps (and haven't found any other issues while building our images). I've sent the backport request

Using ‘devtool modify u-boot-ti-staging’ fails on do_unpack with “Exception: ModuleNotFoundError: No module named '_sysconfigdata'”. I pulled a fresh copy of Poky and tried ‘devtool modify

Hi all, Intel and WR YP QA is now doing QA execution for YP build yocto-3.1.3.rc1 We are planning to execute following tests for this cycle: OEQA-manual tests for following module: 1. OE-Core 2.

Signed-off-by: Armin Kuster <akuster808@...> --- recipes-core/packagegroup/packagegroup-core-security.bb | 1 + 1 file changed, 1 insertion(+) diff --git

Signed-off-by: Armin Kuster <akuster808@...> --- recipes-security/libest/libest_3.2.0.bb | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644

You could try backporting: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=94b1d77472ad335f26ca4ea6ec8c5b399368c06e Cheers, Richard

I tried the latest uninative from the same link, it will remove the warning but it doesn't solve the problem. If something else is wrong/different I would very much like a

Without digging into the details, it sounds very very much like the most of your problems are caused by handcrafting a Makefile which is not cross compile aware and probably has multiple other issues.

Hello all, This is the full report for yocto-3.2_M3.rc2: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-testresults-contrib/tree/?h=intel-yocto-testresults ======= Summary ======== No new

From: Mingli Yu <mingli.yu@...> Set ssh path rather than using hosttools to remove the build path in the files such as drac5, kdumpcheck and etc. Signed-off-by: Mingli Yu

For uninative you can just use latest dunfell with https://git.openembedded.org/openembedded-core/commit/?h=dunfell&id=0f01fb2286335dd0da0c7be3f56c36a0fced3e42 For dpkg you can just try latest, but

From: Yue Tao <Yue.Tao@...> After upgrading 4.5.0, the script ocf-binaries contains the build path | : ${SSH:=/path/to/build/tmp-glibc/hosttools/ssh} Add a configure option to replace it

Signed-off-by: Armin Kuster <akuster808@...> --- recipes-core/packagegroup/packagegroup-core-security.bb | 1 + 1 file changed, 1 insertion(+) diff --git

Signed-off-by: Armin Kuster <akuster808@...> --- recipes-security/softHSM/softhsm_2.6.1.bb | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644

Hello list, The warning in the subject has turned into an error. I'm building a Yocto project based on poky-dunfell-23.0.2 I get this error: ERROR: dpkg-native-1.19.7-r0

Hi, A response came only to me : So I added EXTRA_OEMAKE += "-I${STAGING_INCDIR}to fix the systemd include error. But I still get the error of :

Maybe this should be added to sshd.service [unit] part (to have added dependency) to solve this problem: > The sshd.service file is as follows: > [Unit] > Description=OpenSSH server daemon >

From: Robert Yang <liezhi.yang@...> The LSB support had been removed from oe-core by: https://git.openembedded.org/openembedded-core/commit/?id=fb06435 And it works well to start

From: Yi Zhao <yi.zhao@...> The ucarp.service invokes script /usr/libexec/ucarp to start/stop the ucarp service. But the /etc/init.d/functions file which is required by the script is not