Hi, when i am trying to add meta-python from meta-openembedded i am getting following error i have kept meta-openembedded,meta-raspberrypi into same branch dunfell /Raspberrypi4-yocto$ bitbake-layers

Hi，Sangeeta Are your test case and test steps open source ? If yes, where can I get it ? Thanks a lot. Best Li

All,

HTH: https://www.yoctoproject.org/docs/3.1/ref-manual/ref-manual.html#var-MACHINE

All, YP M+ or high bugs which moved to a new milestone in WW22 are listed below: Priority Bug ID Short Description Changer Owner Was Became Medium+ 8805 Detect and warn people naming

All, The below were the owners of enhancements or bugs closed during the last

All, The triage team is starting to try and collect up and classify bugs which a newcomer to the project would be able to work on in a way which means people can find them. They're being listed on

All, Below is the list as of top 50 bug owners as of the end of WW22 of who have open medium or higher bugs and enhancements against YP 3.2. There are 106 possible work days left until the final

All, Just a reminder we will hold the monthly Yocto Project Technical Meeting at 8am PST tomorrow. (6/2) Yocto Project Technical Team Meeting: We encourage people attending the meeting to

All, I have a AT91SAM9G25 system that has been idle for a couple years (running morty, yocto version 2.2.1) and I am working on updating to the latest Yocto production branch. Before I get there,

Thank you. - Armin

Hi, I was struggling for days about playing a simple wav file with aplay on a raspberry 3b+ jack 3.5mm output. I had built-in snd_bcm2835 and all the required modules and when booting the raspberry,

Hello all, This is the full report for yocto-2.7.4.rc2: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-testresults-contrib/tree/?h=intel-yocto-testresults ======= Summary ======== No high

Hi Edson, You're right. I have seen seen this too. I have already created a bug to track this issue: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13901 For now, as a workaround, you can just

Qemu is also used to run target binaries during build (when there is a need to generate some data files that can only be produced by running those binaries). If you see a build of qemu-native, it will

May I ask you to clarify, how can I do that? I build Yocto image for XILINX ZYNQ7 board and set MACHINE = zybo-zynq7. And then run "bitbake core-image-minimal". QEMU is downloaded, compiled and

вс, 31 мая 2020 г., 14:15 Олег Гаврильченко via lists.yoctoproject.org <reffum=bk.ru@...>: Yes, you can. Check MACHINE variable in documentation. You should set it to specific HW

Hello! Sorry for my English. My first language is Russian. I have a question about build yocto image. Can I build image without build any QEMU packages? And how can I do it? I do not neet QEMU, I run

You don't need this as this is the default value. This has to be swig-native. When in doubt, DEPENDS should be the -native version. After this, you will be missing <winscard.h>, which comes from

Hi, all I used recipetool to create the recipe for NPM packages If the npm package has dependence(s) it works great. But if not, the error below happens. I just add a fake dependence in