yocto@lists.yoctoproject.org

Re: tar ball vs. git development questions

I'm not sure it does. I don't want poky to do more work. I have my download directory, $DL_DIR, outside my build directory so I can keep it run to run, as mentioned in the comments in local.conf. I

By Jim Abernathy · #4352 ·

Re: [PATCH][linux-yocto] pch_gbe: Do not abort probe on bad MAC

Queued. Bruce

By Bruce Ashfield <bruce.ashfield@...> · #4351 ·

Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?

The beagle board would be building on the branch listed in the meta-yocto layer. KMACHINE_beagleboard = "yocto/standard/beagleboard" Everything that you've done is fine, but pushing your changes

By Bruce Ashfield <bruce.ashfield@...> · #4350 ·

Re: Does Edison work with Beagleboard & linux-yocto-3.0 kernel?

OK, hate to bring this up again but I must be doing something wrong. My kernel changes don't appear to be getting picked up. I thought it was OK before but then I did some real work on the kernel and

By Brian Hutchinson <b.hutchman@...> · #4349 ·

Re: tar ball vs. git development questions

If you set BB_GENERATE_MIRROR_TARBALLS = "1" (e.g. in local.conf) then you'll get tarballs which hold the git repositories after download. You can then reuse these (by sharing the DL_DIR or using a

By Gary Thomas · #4348 ·

tar ball vs. git development questions

I have used both git and the tarball methods of bitbaking projects, all of them derivatives of the examples in the Yocto documentation. I was having issues using the local clone of the Yocto kernel

By Jim Abernathy · #4347 ·

Re: Trying to compile mono on target for machine crownbay

nothing is broken. Its the mono package which uses older version of libtool (pre 2.4) and its trying to link in .la files which are generated by new libtool 2.4+ your best option is that add the mono

By Khem Raj · #4346 ·

Re: i486sx machine porting from oe-classic

Hi Mark! I set up the custom layer following your suggestions and it's building now... By inspecting the logs I see "-march=i486" applied to compiler's command lines. I won't be able to test the

By Andrea Galbusera · #4345 ·

Agenda: Yocto Project Technical Team Meeting - Tuesday, January 24, 2012 8:00 AM-9:00 AM (UTC-08:00) Pacific Time (US & Canada).

Agenda * Opens collection - 5 min (Song) * Yocto 1.1.1 point release update - 10 min (Josh/Beth) * Yocto 1.2 M2 status, M3 planning status - 10 min

By Liu, Song <song.liu@...> · #4344 ·

Re: core-image-sato-directdisk

Jim Abernathy Looks good to me.

By Jim Abernathy · #4343 ·

Re: core-image-sato-directdisk

<paul.eggleton@...> wrote: I have created a new link titled "How Do I" on the main page and for now, this is the only entry. Please take a

By autif khan <autif.mlist@...> · #4342 ·

Re: core-image-sato-directdisk

So I would say if any of our documentation is out-of-date or unclear, it should be fixed, no deliberation needed :) However, in Poky master, README.hardware has now been updated to remove

By Paul Eggleton · #4341 ·

Re: i486sx machine porting from oe-classic

A few things you will need.. a tune file for the CPU, and a tune file for the machine/bsp... and you'll have to make sure that eglibc/Linux can still run on that machine. I know a while back some

By Mark Hatle <mark.hatle@...> · #4340 ·

Re: Yocto Project Developer Day at ELC

Excellent question, Jack - we are working on that this week. No promises, but highly likely!

By Osier-mixon, Jeffrey <jeffrey.osier-mixon@...> · #4339 ·

Re: core-image-sato-directdisk

Yup, I wrote then off the cuff, I am glad that a typo is the only error and no major missing steps :-) I am also glad that these steps worked for you. I have not. I am not sure I should. I am not

By autif khan <autif.mlist@...> · #4338 ·

Re: core-image-sato-directdisk

This worked fine for me. one typo in step (5) ext3 and not text3, but these are good instructions. How do we get them put into the README.hardware instead of the directdisk section that doesn't work

By Jim Abernathy · #4337 ·

Re: core-image-sato-directdisk

I have been using core-image-sato and core-image-sato-sdk on the hard disk on Intel Atom (crownbay in my case). I perform the following broad steps: 1) have a suitable partition on the disk - say

By autif khan <autif.mlist@...> · #4336 ·

i486sx machine porting from oe-classic

Hi, In oe-classic there used to be a machine configuration for an i486sx based machine called vortex86sx. In the past I was successful in building a running image for such a target. Since I'd like to

By Andrea Galbusera · #4335 ·

Re: Yocto Project Developer Day at ELC

If you make FOSDEM (www.fosdem.org), Paul Eggleton is talking in the Embedded room about Yocto and

By Philip Balister · #4334 ·

Re: Yocto Project Developer Day at ELC

On 19/01/12 19:41, Jeff Osier-Mixon wrote: Hi Jeff, Would there be any chance of having these talks recorded? They sound fantastic but unfortunately I work for a small

By Jack Mitchell <ml@...> · #4333 ·

Messages