yocto@lists.yoctoproject.org

Re: Yocto build problem on Ubuntu 11.10

For xkeyboard: Try install the XML parser perl module on your host machine and see if it resolves it. Seems like that recipe is using the host's perl when it should not be doing that.That or add

By McClintock Matthew-B29882 <B29882@...> · #3229 ·

Re: Building for pandaboard

That would likely work for userspace (minus the build error you mentioned) with the appropriate config changes. But for the kernel, there is a different set of patches for board support, so you

By Bruce Ashfield <bruce.ashfield@...> · #3228 ·

is there a filesystem issue with kernel 3.0.x on pandaboards?

possibly off-topic but i'm sitting in a fedora/ARM talk right this minute at FSOSS/linuxfest at york u, and the presenter mentioned that when building fedora for pandaboards, they had to back off from

By Robert P. J. Day · #3227 ·

Yocto build problem on Ubuntu 11.10

Hi, I'm trying to build for Beagleboard on Ubuntu 11.10 x64. But it fails to build with the following error. Can anyone help me resolve the problem? When I built for x86qemu, i had no

By Brian Park <bsp2020@...> · #3226 ·

Re: I Need instructional video,Thanks

Hi, I have put videos onto youku in China as alternatives. Background and the Yocto Project Introduction: http://v.youku.com/v_show/id_XMjU4MDc5ODI4.html Yocto Hob Introduction:

By Wang, Shane <shane.wang@...> · #3225 ·

Which filesystem for target?

A bit of an open-ended question, but... Which is the 'best' filesystem to use for an embedded device that's using a CF card? It needs to survive loss-of-power, have a RO root filesystem, allow

By Chris Tapp · #3224 ·

Re: [PATCH 0/3] meta-intel: linux-yocto-rt fixes for crownbay and fri2

For all three: Acked-by: Darren Hart <dvhart@...> -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel

By Darren Hart <dvhart@...> · #3223 ·

[PATCH 3/3] meta-crownbay: allow linux-yocto-rt to be used for crownbay

From: Tom Zanussi <tom.zanussi@...> The crownbay linux-yocto-rt .bbappend is missing settings needed for use with crownbay - this adds them. Signed-off-by: Tom Zanussi

By tom.zanussi@... · #3222 ·

[PATCH 2/3] meta-fri2: allow linux-yocto-rt to be used for fri2-noemgd

From: Tom Zanussi <tom.zanussi@...> The fri2 linux-yocto-rt .bbappend is missing settings needed for use with fri2-noemgd - this adds them. Signed-off-by: Tom Zanussi

By tom.zanussi@... · #3221 ·

[PATCH 1/3] meta-crownbay: add linux-yocto-rt_3.0.bbappend

From: Tom Zanussi <tom.zanussi@...> commit 061f3187e8cbec70d5970928b6e8252cb0958f4a (meta-intel: move emgd-driver-bin_1.8 to common) somehow mistakenly removed the unrelated

By tom.zanussi@... · #3219 ·

[PATCH 0/3] meta-intel: linux-yocto-rt fixes for crownbay and fri2

From: Tom Zanussi <tom.zanussi@...> Trying to build rt images for crownbay and fri2, I ran in to a few build problems - this patchset fixes them up. The following changes since commit

By tom.zanussi@... · #3220 ·

[PATCH] Fix HOMEPAGE values in libzypp and sat-solver .bb files

Fix obvious typoes in .bb files for libzypp and sat-solver packages, and update the HOMEPAGE for sat-solver to refer to the sat-solver home page itself, rather than the libzypp home

By Robert P. J. Day · #3218 ·

Re: building and using yocto 1.1

filed a bug on sato-input. thanks!

By Xianghua Xiao <xiaoxianghua@...> · #3217 ·

Re: am i the only person having trouble fetching sat-solver?

i'm guessing it was exactly that -- a stale tarball i didn't realize i was picking up. since now i can't reproduce so i'm going to forget about it unless it happens again. coming shortly. rday

By Robert P. J. Day · #3216 ·

Re: am i the only person having trouble fetching sat-solver?

Probably that a stale tarball was still on your system. Can you tell me how you're proceeding when the fetch has failed? Do you cleanall before trying again? Sounds like we have a bug to fix in here

By Joshua Lock <josh@...> · #3215 ·

Re: am i the only person having trouble fetching sat-solver?

never mind, just cleared *everything* out and tried again and it worked. mystery. in any event, there's a minor typo in the sat-solver_git.bb file: HOMEPAGE =

By Robert P. J. Day · #3214 ·

Re: am i the only person having trouble fetching sat-solver?

I cannot reproduce this on my F16 workstation here. I recall similar issues in the past due to buggy tar on the host system, for which we added a tar native recipe. My system is fetching the tarball

By Joshua Lock <josh@...> · #3213 ·

Re: Building for pandaboard

Thanks for the info. As I'm very new to Yocto, I'd not know how to create local.conf to build for panda, even knowing that the kernel will support pandaboard. How would I go about configuring Yocto

By Brian Park <bsp2020@...> · #3212 ·

Re: building and using yocto 1.1

The build time issue is known, we're doing more work (building more things) in 1.1 - however, reducing build time is a primary goal and I expect there to be a reduction in build time by the time 1.2

By Joshua Lock <josh@...> · #3211 ·

Re: building and using yocto 1.1

We have a BitBake command to fetch all of the sources without actually doing the build: bitbake <target> -c fetchall i.e. bitbake core-image-sato -c fetchall OR bitbake world -c

By Joshua Lock <josh@...> · #3210 ·

Messages