Change-Id: I682365b514f233616ac7eb07667edc4ca6afcdfa Signed-off-by: Andrei Gherzan <andrei@...> --- recipes-bcm/common/firmware.inc | 4 ++-- recipes-bcm/vc-graphics/vc-graphics.inc |

This is already a raspberrypi specific recipe. So this is useless and would break other machines. Change-Id: Ie1d627384255660d7e213833fd4433f47c0edc1d Signed-off-by: Andrei Gherzan

Change-Id: If3ff46ae10b7bee2decead6dfa408833713d16f8 Signed-off-by: Andrei Gherzan <andrei@...> --- conf/machine/include/rpi-default-versions.inc | 2 +- 1 file changed, 1 insertion(+), 1

In this way the modifications will be used on all RPI boards. Change-Id: Ife10db876db85c1c4944028a0b49ccae4d8c0d41 Signed-off-by: Andrei Gherzan <andrei@...> ---

*.conf files should hold board specific stuff while rpi-base.inc should include configuration that is common for all Raspberry Pi boards. Remove MACHINE_KERNEL_PR as we don't use it anymore. Minor

fix new build issues with pcap-config cleanup configure selection Signed-off-by: Armin Kuster <akuster808@...> --- recipes-security/suricata/libhtp_0.5.16.bb | 2 +-

Hi all, I'm writing a recipe for QT5 which will generate both host tools and target lib at the same build. How can I handle this situation? It doesn't fix either target or native class. Can cross

Poky Daisy 1.6.1 I have a recipe that must fetch from a git repo using https. I have specified “;protocol=https” in the SRC_URI. The fetch task for this recipe is failing with:

Aurele, One possible issue is ${sysconfdir}/network/interfaces is listed in the CONFFILES in the original recipe. It may still be installing this file because it is listed under CONFFILES. Try

Hi Alvin, <adm.dizon@...> wrote: I should have said to look in the Build directory of linux-imx in

Alvin,, <adm.dizon@...> wrote: Look into ${WORKDIR}/temp for what's

Just an update. This was also posted to the yocto-infrastructure list and handled there. ADT repos are all online again. Michael HalsteadYocto Project / SysAdmin On 02/03/2015

Change-Id: If1d2608322749db4baa445ba94bc471a0ac86a5c Signed-off-by: Andrei Gherzan <andrei@...> --- recipes-graphics/userland/userland_git.bb | 7 +++++-- 1 file changed, 5 insertions(+), 2

Change-Id: Iebac94415602454dd4e2808c8e02d0083f804029 Signed-off-by: Andrei Gherzan <andrei@...> --- recipes-bcm/bcm2835/bcm2835_1.36.bb | 40 -------------------------------------

Change-Id: Ifc455b9106f07583ccaf3fe82723baaeb5e04d2e Signed-off-by: Andrei Gherzan <andrei@...> --- recipes-devtools/python/rpi-gpio_0.5.6.bb | 19 -------------------

Add a patch to fix the pkg-config mechanism in ffmpeg. Change-Id: Ib506bb4e26a8a0c5c294ed55da0a0da8dc67a2d7 Signed-off-by: Andrei Gherzan <andrei@...> ---

We use this to simplify the update process. Updating a kernel version will not require renaming the recipe but only tweaking LINUX_VERSION. Update kernel version: - bump SRCREV - bump

Hi, I'm trying to find a clean way to replace /etc/network/interfaces with a symbolic link. (it comes with init-ifupdown recipe)I tried with a bbappend but nothing appear in final filesystem and

You will need to define a BSP that is little endian capable. The BSP should define: DEFAULTTUNE ?= "mips32r2el" You can verify the setting using bitbake -e and inspecting the value of DEFAULTTUNE.

OE and QT have different view how to cross-compile, see attached IRC log for details, in short in OE we want to build native tools in completely separate build and then use the same tools (sstate) for