Date   

Re: Yocto with xtensa

Khem Raj
 

On 5/12/21 11:45 PM, Jack Daniels wrote:
Hello Khem,
Thank you for the information.
Is it about adding support for the xtensa build system (toolchain)? Is it work for heterogeneous SoC (CPU/ARM + DSP/xtensa) as well?
I can think of few ways

build your Xtensa firmware outside yocto and let yocto package it via recipes for prebuilts and build ARM system with yocto should work well

second option is to integrate Xtensa support into OE and then use multiconfig feature to build firmware for heterogenous systems.
this will be preferred and forward looking for future but it will be
more work

Thank you.
BR/J
On Thu, May 13, 2021 at 1:07 AM Khem Raj <raj.khem@... <mailto:raj.khem@...>> wrote:
Hello Jack,
I think we do not have support for Xtensa architecture working out of
box upstream. Although it should be possible to add it with little
effort, but no one has spun patches to do so
thus far.
Thanks
-Khem
On Wed, May 12, 2021 at 1:29 PM Jack Daniels <onyx22574@...
<mailto:onyx22574@...>> wrote:
>
> Dears,
>
> I am looking for a way to include sample code for DSP (xtensa)
with Yocto/Linux. what would be the procedure to include such a code
and eventually interprocessor communication between xtensa core and
CPU under Yocto/Linux?
>
> Thank you.
> BR/J
>
>
>


Re: [meta-zephyr][PATCH 1/1] zephyr-qemuboot.bbclass: Fix runqemu dependency on qemu native sysroot

Andrei Gherzan
 

Hi Ross,

On Thu, 13 May 2021, at 13:37, Andrei Gherzan wrote:
Hi,

On Thu, 13 May 2021, at 13:14, Ross Burton wrote:
> Debugged, the patch is broken.

> Using a little tool I have:

> Task qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot failed
> Active tasks are:
>  virglrenderer-native-0.9.1-r0:do_rm_work
>  binutils-cross-arm-2.36.1-r0:do_patch
>  qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot
>  qemu-system-native-5.2.0-r0:do_rm_work
>  libepoxy-native-1.5.5-r0:do_rm_work
>  gcc-source-11.1.0-11.1.0-r0:do_unpack

> Note how qemu is simultaneously adding itself to the sysroot, whilst
> rm_work is running and deleting the sysroot.

> This patch isn't compatible with rm_work and should be reverted.


I'll look into it.



-- 
Andrei Gherzan 
gpg: rsa4096/D4D94F67AD0E9640


[meta-zephyr][PATCH 2/2] zephyr-qemuboot.bbclass: Remove dependency on qemu-system-native

Andrei Gherzan
 

From: Andrei Gherzan <andrei.gherzan@...>

runqemu only really needs the sysroot for qemu-helper-native. Pulling
other qemu dependency would get into a racing issue with rm_work. That
can also be fixed by tweaking the do_addto_recipe_sysroot order in
oe-core for qemu-system-native but that is just not needed for this
specific dependency requirement.

Signed-off-by: Andrei Gherzan <andrei.gherzan@...>
---
classes/zephyr-qemuboot.bbclass | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/classes/zephyr-qemuboot.bbclass b/classes/zephyr-qemuboot.bbclass
index f508b45..c268e9e 100644
--- a/classes/zephyr-qemuboot.bbclass
+++ b/classes/zephyr-qemuboot.bbclass
@@ -36,19 +36,18 @@ python do_bootconf_write() {

addtask do_bootconf_write before do_build after do_deploy

-# The runqemu script requires the native sysroot populated for the qemu
-# recipes. Usually, this is pulled in by a do_image dependency (see
-# baremetal-helloworld_git, for example), but in this case, there is no such
-# task, so we hook in the dependency to do_bootconf_write. This also ensures
-# that builds from sstate will also have this requirement satisfied.
+# The runqemu script requires the native sysroot populated for the
+# qemu-helper-native recipes. Usually, this is pulled in by a do_image
+# dependency (see baremetal-helloworld_git, for example), but in this case,
+# there is no such task, so we hook in the dependency to do_bootconf_write.
+# This also ensures that builds from sstate will also have this requirement
+# satisfied.
python () {
- # do_addto_recipe_sysroot doesnt exist for all recipes, but we need it to have
- # /usr/bin on recipe-sysroot (qemu) populated
def extraimage_getdepends(task):
deps = ""
for dep in (d.getVar('EXTRA_IMAGEDEPENDS') or "").split():
# Make sure we only add it for qemu
- if 'qemu' in dep:
+ if 'qemu-helper-native' in dep:
deps += " %s:%s" % (dep, task)
return deps
d.appendVarFlag('do_bootconf_write', 'depends', extraimage_getdepends('do_addto_recipe_sysroot'))
--
2.31.1


[meta-zephyr][PATCH 1/2] zephyr-qemuboot.bbclass: Don't overwrite the entire elf dictionary key

Andrei Gherzan
 

From: Andrei Gherzan <andrei.gherzan@...>

The nios2_machdata_setfunc was overwriting the elf key in matchdata for
arc done in arc_machdata_setfunc which in turn was overwriting the one
from oe-core. This is making qemu-x86 builds (as an example)
unbuildable:

Exception: KeyError: 'i586'

This patch makes sure that the changes complement the machdata
dictionary as opposed to overwriting the entire "elf" key.

Signed-off-by: Andrei Gherzan <andrei.gherzan@...>
---
classes/siteinfo-zephyr.bbclass | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/classes/siteinfo-zephyr.bbclass b/classes/siteinfo-zephyr.bbclass
index d84fd3a..b84a9b2 100644
--- a/classes/siteinfo-zephyr.bbclass
+++ b/classes/siteinfo-zephyr.bbclass
@@ -1,4 +1,3 @@
-
def arc_siteinfo_setfunc(archinfo, osinfo, targetinfo, d):
archinfo['arc'] = "endian-little bit-32 "
osinfo['linux'] = "common-linux common-glibc"
@@ -8,7 +7,7 @@ def arc_siteinfo_setfunc(archinfo, osinfo, targetinfo, d):
SITEINFO_EXTRA_DATAFUNCS += "arc_siteinfo_setfunc"

def arc_machdata_setfunc(machdata, d):
- machdata["elf"] = { "arc" : (195, 0, 0, True, 32), }
+ machdata["elf"]["arc"] = (195, 0, 0, True, 32)
return machdata

PACKAGEQA_EXTRA_MACHDEFFUNCS += "arc_machdata_setfunc"
@@ -22,7 +21,7 @@ def iamcu_siteinfo_setfunc(archinfo, osinfo, targetinfo, d):
SITEINFO_EXTRA_DATAFUNCS += "iamcu_siteinfo_setfunc"

def nios2_machdata_setfunc(machdata, d):
- machdata["elf"] = {"nios2": (113, 0, 0, True, 32), }
+ machdata["elf"]["nios2"] = (113, 0, 0, True, 32)
return machdata

-PACKAGEQA_EXTRA_MACHDEFFUNCS += "nios2_machdata_setfunc"
\ No newline at end of file
+PACKAGEQA_EXTRA_MACHDEFFUNCS += "nios2_machdata_setfunc"
--
2.31.1


Re: [meta-zephyr][PATCH 1/1] zephyr-qemuboot.bbclass: Fix runqemu dependency on qemu native sysroot

Andrei Gherzan
 

Hi,

On Thu, 13 May 2021, at 13:14, Ross Burton wrote:
Debugged, the patch is broken.

Using a little tool I have:

Task qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot failed
Active tasks are:
virglrenderer-native-0.9.1-r0:do_rm_work
binutils-cross-arm-2.36.1-r0:do_patch
qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot
qemu-system-native-5.2.0-r0:do_rm_work
libepoxy-native-1.5.5-r0:do_rm_work
gcc-source-11.1.0-11.1.0-r0:do_unpack

Note how qemu is simultaneously adding itself to the sysroot, whilst
rm_work is running and deleting the sysroot.

This patch isn't compatible with rm_work and should be reverted.
I'll look into it.

--
Andrei Gherzan
gpg: rsa4096/D4D94F67AD0E9640


Re: [meta-zephyr][PATCH 1/1] zephyr-qemuboot.bbclass: Fix runqemu dependency on qemu native sysroot

Ross Burton <ross@...>
 

Debugged, the patch is broken.

Using a little tool I have:

Task qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot failed
Active tasks are:
virglrenderer-native-0.9.1-r0:do_rm_work
binutils-cross-arm-2.36.1-r0:do_patch
qemu-system-native-5.2.0-r0:do_addto_recipe_sysroot
qemu-system-native-5.2.0-r0:do_rm_work
libepoxy-native-1.5.5-r0:do_rm_work
gcc-source-11.1.0-11.1.0-r0:do_unpack

Note how qemu is simultaneously adding itself to the sysroot, whilst
rm_work is running and deleting the sysroot.

This patch isn't compatible with rm_work and should be reverted.

Ross

On Thu, 13 May 2021 at 13:06, Ross Burton <ross@...> wrote:

This is breaking our CI:

ERROR: qemu-system-native-5.2.0-r0 do_addto_recipe_sysroot: Error
executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:extend_recipe_sysroot(d)
0003:
File: '/builds/yocto-poc/meta-arm/work/poky/meta/classes/staging.bbclass',
lineno: 502, function: extend_recipe_sysroot
0498: continue
0499:
0500: msg_adding.append(c)
0501:
*** 0502: os.symlink(c + "." + taskhash, depdir + "/" + c)
0503:
0504: manifest, d2 = oe.sstatesig.find_sstate_manifest(c,
setscenedeps[dep][2], "populate_sysroot", d, multilibs)
0505: if d2 is not d:
0506: # If we don't do this, the recipe sysroot will
be placed in the wrong WORKDIR for multilibs
Exception: FileNotFoundError: [Errno 2] No such file or directory:
'zlib-native.0f0b3e4d16f9ad46dd8609d8c899a834104f5b572a4a5438ccccd1db88d67e97'
-> '/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/recipe-sysroot-native/installeddeps/zlib-native'
ERROR: Logfile of failure stored in:
/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/temp/log.do_addto_recipe_sysroot.7593
ERROR: Task (/builds/yocto-poc/meta-arm/work/poky/meta/recipes-devtools/qemu/qemu-system-native_5.2.0.bb:do_addto_recipe_sysroot)
failed with exit code '1'
ERROR: qemu-system-native-5.2.0-r0 do_rm_work: Execution of
'/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/temp/run.do_rm_work.7583'
failed with exit code 1:
rm: cannot remove 'recipe-sysroot-native': Directory not empty

Can this be reverted whilst this is debugged?

Ross

On Fri, 7 May 2021 at 11:09, Andrei Gherzan <andrei@...> wrote:

From: Andrei Gherzan <andrei.gherzan@...>

The runqemu script depends on having the native sysroot populated for
the qemu recipes. Add the required dependency to the mix.

Signed-off-by: Andrei Gherzan <andrei.gherzan@...>
---
classes/zephyr-qemuboot.bbclass | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/classes/zephyr-qemuboot.bbclass b/classes/zephyr-qemuboot.bbclass
index 5ac1c86..f508b45 100644
--- a/classes/zephyr-qemuboot.bbclass
+++ b/classes/zephyr-qemuboot.bbclass
@@ -35,3 +35,22 @@ python do_bootconf_write() {
}

addtask do_bootconf_write before do_build after do_deploy
+
+# The runqemu script requires the native sysroot populated for the qemu
+# recipes. Usually, this is pulled in by a do_image dependency (see
+# baremetal-helloworld_git, for example), but in this case, there is no such
+# task, so we hook in the dependency to do_bootconf_write. This also ensures
+# that builds from sstate will also have this requirement satisfied.
+python () {
+ # do_addto_recipe_sysroot doesnt exist for all recipes, but we need it to have
+ # /usr/bin on recipe-sysroot (qemu) populated
+ def extraimage_getdepends(task):
+ deps = ""
+ for dep in (d.getVar('EXTRA_IMAGEDEPENDS') or "").split():
+ # Make sure we only add it for qemu
+ if 'qemu' in dep:
+ deps += " %s:%s" % (dep, task)
+ return deps
+ d.appendVarFlag('do_bootconf_write', 'depends', extraimage_getdepends('do_addto_recipe_sysroot'))
+ d.appendVarFlag('do_bootconf_write', 'depends', extraimage_getdepends('do_populate_sysroot'))
+}
--
2.31.1




Re: [meta-zephyr][PATCH 1/1] zephyr-qemuboot.bbclass: Fix runqemu dependency on qemu native sysroot

Ross Burton <ross@...>
 

This is breaking our CI:

ERROR: qemu-system-native-5.2.0-r0 do_addto_recipe_sysroot: Error
executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:extend_recipe_sysroot(d)
0003:
File: '/builds/yocto-poc/meta-arm/work/poky/meta/classes/staging.bbclass',
lineno: 502, function: extend_recipe_sysroot
0498: continue
0499:
0500: msg_adding.append(c)
0501:
*** 0502: os.symlink(c + "." + taskhash, depdir + "/" + c)
0503:
0504: manifest, d2 = oe.sstatesig.find_sstate_manifest(c,
setscenedeps[dep][2], "populate_sysroot", d, multilibs)
0505: if d2 is not d:
0506: # If we don't do this, the recipe sysroot will
be placed in the wrong WORKDIR for multilibs
Exception: FileNotFoundError: [Errno 2] No such file or directory:
'zlib-native.0f0b3e4d16f9ad46dd8609d8c899a834104f5b572a4a5438ccccd1db88d67e97'
-> '/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/recipe-sysroot-native/installeddeps/zlib-native'
ERROR: Logfile of failure stored in:
/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/temp/log.do_addto_recipe_sysroot.7593
ERROR: Task (/builds/yocto-poc/meta-arm/work/poky/meta/recipes-devtools/qemu/qemu-system-native_5.2.0.bb:do_addto_recipe_sysroot)
failed with exit code '1'
ERROR: qemu-system-native-5.2.0-r0 do_rm_work: Execution of
'/builds/yocto-poc/meta-arm/work/build/tmp/work/aarch64-linux/qemu-system-native/5.2.0-r0/temp/run.do_rm_work.7583'
failed with exit code 1:
rm: cannot remove 'recipe-sysroot-native': Directory not empty

Can this be reverted whilst this is debugged?

Ross

On Fri, 7 May 2021 at 11:09, Andrei Gherzan <andrei@...> wrote:

From: Andrei Gherzan <andrei.gherzan@...>

The runqemu script depends on having the native sysroot populated for
the qemu recipes. Add the required dependency to the mix.

Signed-off-by: Andrei Gherzan <andrei.gherzan@...>
---
classes/zephyr-qemuboot.bbclass | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/classes/zephyr-qemuboot.bbclass b/classes/zephyr-qemuboot.bbclass
index 5ac1c86..f508b45 100644
--- a/classes/zephyr-qemuboot.bbclass
+++ b/classes/zephyr-qemuboot.bbclass
@@ -35,3 +35,22 @@ python do_bootconf_write() {
}

addtask do_bootconf_write before do_build after do_deploy
+
+# The runqemu script requires the native sysroot populated for the qemu
+# recipes. Usually, this is pulled in by a do_image dependency (see
+# baremetal-helloworld_git, for example), but in this case, there is no such
+# task, so we hook in the dependency to do_bootconf_write. This also ensures
+# that builds from sstate will also have this requirement satisfied.
+python () {
+ # do_addto_recipe_sysroot doesnt exist for all recipes, but we need it to have
+ # /usr/bin on recipe-sysroot (qemu) populated
+ def extraimage_getdepends(task):
+ deps = ""
+ for dep in (d.getVar('EXTRA_IMAGEDEPENDS') or "").split():
+ # Make sure we only add it for qemu
+ if 'qemu' in dep:
+ deps += " %s:%s" % (dep, task)
+ return deps
+ d.appendVarFlag('do_bootconf_write', 'depends', extraimage_getdepends('do_addto_recipe_sysroot'))
+ d.appendVarFlag('do_bootconf_write', 'depends', extraimage_getdepends('do_populate_sysroot'))
+}
--
2.31.1




Re: Yocto with xtensa

Jack Daniels <onyx22574@...>
 

Hello Khem,

Thank you for the information. 
Is it about adding support for the xtensa build system (toolchain)? Is it work for heterogeneous SoC (CPU/ARM + DSP/xtensa) as well?

Thank you.
BR/J

On Thu, May 13, 2021 at 1:07 AM Khem Raj <raj.khem@...> wrote:
Hello Jack,

I think we do not have support for Xtensa architecture working out of
box upstream. Although it should be possible to add it with little
effort, but no one has spun patches to do so
thus far.

Thanks
-Khem

On Wed, May 12, 2021 at 1:29 PM Jack Daniels <onyx22574@...> wrote:
>
> Dears,
>
> I am looking for a way to include sample code for DSP (xtensa) with Yocto/Linux. what would be the procedure to include such a code and eventually interprocessor communication between xtensa core and CPU under Yocto/Linux?
>
> Thank you.
> BR/J
>
>
>
>


Re: Yocto Zeus : facing error regarding hostapd #zeus

Zoran
 

Hello Rohit,

It is a good find. I also googled for the error, and found this as an
explanation:
https://www.yoctoproject.org/pipermail/yocto/2019-February/044153.html

I included Alex (Kanavin), who created the above mail.

Maybe Alex can give more light on the problem?

In the meantime, you should explore (by similarities) this pointer in
very details:
https://github.com/Xilinx/meta-virtualization/issues/4#issuecomment-590532621

Zoran
_______

On Thu, May 13, 2021 at 8:25 AM rohit jadhav <rohitbjadhav1@...> wrote:

Hi Zoran,
log.do_rootfs.31340is linked to log.do_rootfs I have checked with ls command, So both files are identical.

While surfing I found similar thread but its for different package its as follows :
https://github.com/Xilinx/meta-virtualization/issues/4

Can you please help out with this for our Package Hostapd ?

Thanks and Regards
Rohit

On Thu, May 13, 2021 at 10:18 AM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:

From the log log.do_rootfs.31340 file, there are the following:

[1] ERROR: Postinstall scriptlets of ['hostapd'] have failed.

HOSTAP stands for: HOST Access Point Daemon. I could not conclude too much from:
https://en.wikipedia.org/wiki/Hostapd

It is kind of a hot spot, as my best understanding is.

[2] Details of the failure are in
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.

So, my best guess, looking into log.do_rootfs will tell us much more.

Please, attach this one for our review as well.

Thank you,
Zoran
_______

On Wed, May 12, 2021 at 5:29 PM rohit jadhav <rohitbjadhav1@...> wrote:

Hi Zoran ,
I have attached the log file for your reference.
Thank You
Regards
Rohit

On Wed, May 12, 2021 at 7:50 PM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:

Log file in:
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/
imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/
log.do_rootfs.31340

Could you, please, attach a log file?

Thank you,
Zoran
_______


On Wed, May 12, 2021 at 2:01 PM rohit jadhav <rohitbjadhav1@...> wrote:

Facing following issue :
ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of ['hostapd'] have failed. If the intention is to defer them to first boot,
then please place them into pkg_postinst_ontarget_${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
Details of the failure are in /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.
ERROR: Logfile of failure stored in: /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.31340
ERROR: Task (/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/sources/poky/meta/recipes-core/images/core-image-minimal.bb:do_rootfs) failed with exit code '1'

Please guide me if anyone have any idea to resolve.

Thanks in advance.


Re: Yocto Zeus : facing error regarding hostapd #zeus

rohit jadhav
 

Hi Zoran,
   log.do_rootfs.31340is linked to log.do_rootfs I have checked with ls command, So both files are identical.

While surfing I found similar thread but its for different package  its as follows :

Can you please help out with this for our Package Hostapd ?

Thanks and Regards
Rohit


On Thu, May 13, 2021 at 10:18 AM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:
From the log log.do_rootfs.31340 file, there are the following:

[1] ERROR: Postinstall scriptlets of ['hostapd'] have failed.

HOSTAP stands for: HOST Access Point Daemon. I could not conclude too much from:
https://en.wikipedia.org/wiki/Hostapd

It is kind of a hot spot, as my best understanding is.

[2] Details of the failure are in
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.

So, my best guess, looking into log.do_rootfs will tell us much more.

Please, attach this one for our review as well.

Thank you,
Zoran
_______

On Wed, May 12, 2021 at 5:29 PM rohit jadhav <rohitbjadhav1@...> wrote:
>
> Hi Zoran ,
> I have attached the log file for your reference.
> Thank You
> Regards
> Rohit
>
> On Wed, May 12, 2021 at 7:50 PM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:
>>
>> > Log file in:
>> > /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/
>> > imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/
>> log.do_rootfs.31340
>>
>> Could you, please, attach a log file?
>>
>> Thank you,
>> Zoran
>> _______
>>
>>
>> On Wed, May 12, 2021 at 2:01 PM rohit jadhav <rohitbjadhav1@...> wrote:
>>>
>>> Facing following issue :
>>> ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of ['hostapd'] have failed. If the intention is to defer them to first boot,
>>> then please place them into pkg_postinst_ontarget_${PN} ().
>>> Deferring to first boot via 'exit 1' is no longer supported.
>>> Details of the failure are in /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.
>>> ERROR: Logfile of failure stored in: /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.31340
>>> ERROR: Task (/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/sources/poky/meta/recipes-core/images/core-image-minimal.bb:do_rootfs) failed with exit code '1'
>>>
>>> Please guide me if anyone have any idea to resolve.
>>>
>>> Thanks in advance.
>>>
>>>


Re: [meta-raspberrypi][PATCH] 99-com.rules: fix error invalid substitution type

Changqing Li
 

On 5/13/21 11:48 AM, Khem Raj wrote:
[Please note: This e-mail is from an EXTERNAL e-mail address]

On 5/12/21 8:42 PM, Changqing Li wrote:
From: Changqing Li <changqing.li@...>

fix below error:
/etc/udev/rules.d/99-com.rules:10 Invalid value "/bin/sh -c
'ALIASES=/proc/device-tree/aliases; if cmp -s $ALIASES/uart0
$ALIASES/serial0; then echo 0;elif cmp -s $ALIASES/uart0
$ALIASES/serial1; then echo 1; else exit 1; fi'" for PROGRAM (char 58:
invalid substitution type)
Can you create a pull request on github for this please.
ok

Signed-off-by: Changqing Li <changqing.li@...>
---
  recipes-core/udev/udev-rules-rpi/99-com.rules | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/recipes-core/udev/udev-rules-rpi/99-com.rules b/recipes-core/udev/udev-rules-rpi/99-com.rules
index 6bf019b..ddd1e17 100644
--- a/recipes-core/udev/udev-rules-rpi/99-com.rules
+++ b/recipes-core/udev/udev-rules-rpi/99-com.rules
@@ -1,8 +1,8 @@
  KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
      ALIASES=/proc/device-tree/aliases; \
-     if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+     if cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \
              echo 0;\
-     elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+     elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \
              echo 1; \
      else \
              exit 1; \
@@ -11,9 +11,9 @@ KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\

  KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
      ALIASES=/proc/device-tree/aliases; \
-     if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+     if cmp -s $$ALIASES/uart1 $$ALIASES/serial0; then \
              echo 0; \
-     elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+     elif cmp -s $$ALIASES/uart1 $$ALIASES/serial1; then \
              echo 1; \
      else \
              exit 1; \




Re: Yocto Zeus : facing error regarding hostapd #zeus

Zoran
 

From the log log.do_rootfs.31340 file, there are the following:

[1] ERROR: Postinstall scriptlets of ['hostapd'] have failed.

HOSTAP stands for: HOST Access Point Daemon. I could not conclude too much from:
https://en.wikipedia.org/wiki/Hostapd

It is kind of a hot spot, as my best understanding is.

[2] Details of the failure are in
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.

So, my best guess, looking into log.do_rootfs will tell us much more.

Please, attach this one for our review as well.

Thank you,
Zoran
_______

On Wed, May 12, 2021 at 5:29 PM rohit jadhav <rohitbjadhav1@...> wrote:

Hi Zoran ,
I have attached the log file for your reference.
Thank You
Regards
Rohit

On Wed, May 12, 2021 at 7:50 PM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:

Log file in:
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/
imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/
log.do_rootfs.31340

Could you, please, attach a log file?

Thank you,
Zoran
_______


On Wed, May 12, 2021 at 2:01 PM rohit jadhav <rohitbjadhav1@...> wrote:

Facing following issue :
ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of ['hostapd'] have failed. If the intention is to defer them to first boot,
then please place them into pkg_postinst_ontarget_${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
Details of the failure are in /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.
ERROR: Logfile of failure stored in: /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.31340
ERROR: Task (/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/sources/poky/meta/recipes-core/images/core-image-minimal.bb:do_rootfs) failed with exit code '1'

Please guide me if anyone have any idea to resolve.

Thanks in advance.


Re: [meta-raspberrypi][PATCH] 99-com.rules: fix error invalid substitution type

Khem Raj
 

On 5/12/21 8:42 PM, Changqing Li wrote:
From: Changqing Li <changqing.li@...>
fix below error:
/etc/udev/rules.d/99-com.rules:10 Invalid value "/bin/sh -c
'ALIASES=/proc/device-tree/aliases; if cmp -s $ALIASES/uart0
$ALIASES/serial0; then echo 0;elif cmp -s $ALIASES/uart0
$ALIASES/serial1; then echo 1; else exit 1; fi'" for PROGRAM (char 58:
invalid substitution type)
Can you create a pull request on github for this please.

Signed-off-by: Changqing Li <changqing.li@...>
---
recipes-core/udev/udev-rules-rpi/99-com.rules | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/recipes-core/udev/udev-rules-rpi/99-com.rules b/recipes-core/udev/udev-rules-rpi/99-com.rules
index 6bf019b..ddd1e17 100644
--- a/recipes-core/udev/udev-rules-rpi/99-com.rules
+++ b/recipes-core/udev/udev-rules-rpi/99-com.rules
@@ -1,8 +1,8 @@
KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
ALIASES=/proc/device-tree/aliases; \
- if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+ if cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \
echo 0;\
- elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+ elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \
echo 1; \
else \
exit 1; \
@@ -11,9 +11,9 @@ KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
ALIASES=/proc/device-tree/aliases; \
- if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+ if cmp -s $$ALIASES/uart1 $$ALIASES/serial0; then \
echo 0; \
- elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+ elif cmp -s $$ALIASES/uart1 $$ALIASES/serial1; then \
echo 1; \
else \
exit 1; \


[meta-raspberrypi][PATCH] 99-com.rules: fix error invalid substitution type

Changqing Li
 

From: Changqing Li <changqing.li@...>

fix below error:
/etc/udev/rules.d/99-com.rules:10 Invalid value "/bin/sh -c
'ALIASES=/proc/device-tree/aliases; if cmp -s $ALIASES/uart0
$ALIASES/serial0; then echo 0;elif cmp -s $ALIASES/uart0
$ALIASES/serial1; then echo 1; else exit 1; fi'" for PROGRAM (char 58:
invalid substitution type)

Signed-off-by: Changqing Li <changqing.li@...>
---
recipes-core/udev/udev-rules-rpi/99-com.rules | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/recipes-core/udev/udev-rules-rpi/99-com.rules b/recipes-core/udev/udev-rules-rpi/99-com.rules
index 6bf019b..ddd1e17 100644
--- a/recipes-core/udev/udev-rules-rpi/99-com.rules
+++ b/recipes-core/udev/udev-rules-rpi/99-com.rules
@@ -1,8 +1,8 @@
KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
ALIASES=/proc/device-tree/aliases; \
- if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+ if cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \
echo 0;\
- elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+ elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \
echo 1; \
else \
exit 1; \
@@ -11,9 +11,9 @@ KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\

KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
ALIASES=/proc/device-tree/aliases; \
- if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+ if cmp -s $$ALIASES/uart1 $$ALIASES/serial0; then \
echo 0; \
- elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+ elif cmp -s $$ALIASES/uart1 $$ALIASES/serial1; then \
echo 1; \
else \
exit 1; \
--
2.17.1


[meta-security][PATCH 6/6] packagegroup-core-security: add aide and ossec

Armin Kuster
 

Signed-off-by: Armin Kuster <akuster808@...>
---
recipes-core/packagegroup/packagegroup-core-security.bb | 2 ++
1 file changed, 2 insertions(+)

diff --git a/recipes-core/packagegroup/packagegroup-core-security.bb b/recipes-core/packagegroup/packagegroup-core-security.bb
index 54b8297..0bddf64 100644
--- a/recipes-core/packagegroup/packagegroup-core-security.bb
+++ b/recipes-core/packagegroup/packagegroup-core-security.bb
@@ -70,6 +70,8 @@ SUMMARY_packagegroup-security-ids = "Security Intrusion Detection systems"
RDEPENDS_packagegroup-security-ids = " \
samhain-standalone \
${@bb.utils.contains_any("TUNE_FEATURES", "ppc7400 riscv32 riscv64", "", " suricata",d)} \
+ ossec-hids \
+ aide \
"

SUMMARY_packagegroup-security-mac = "Security Mandatory Access Control systems"
--
2.25.1


[meta-security][PATCH 5/6] aide: Add another ids

Armin Kuster
 

Signed-off-by: Armin Kuster <akuster808@...>
---
recipes-ids/aide/aide/aide.conf | 94 +++++++++++++++++++++++++++++++++
recipes-ids/aide/aide_0.17.3.bb | 41 ++++++++++++++
2 files changed, 135 insertions(+)
create mode 100644 recipes-ids/aide/aide/aide.conf
create mode 100644 recipes-ids/aide/aide_0.17.3.bb

diff --git a/recipes-ids/aide/aide/aide.conf b/recipes-ids/aide/aide/aide.conf
new file mode 100644
index 0000000..2c99e07
--- /dev/null
+++ b/recipes-ids/aide/aide/aide.conf
@@ -0,0 +1,94 @@
+# Example configuration file for AIDE.
+
+@@define DBDIR /usr/lib/aide
+@@define LOGDIR /usr/lib/aide/logs
+
+# The location of the database to be read.
+database_in=file:@@{DBDIR}/aide.db.gz
+
+# The location of the database to be written.
+#database_out=sql:host:port:database:login_name:passwd:table
+#database_out=file:aide.db.new
+database_out=file:@@{DBDIR}/aide.db.gz
+
+# Whether to gzip the output to database
+gzip_dbout=yes
+
+# Default.
+log_level=warning
+
+report_url=file:@@{LOGDIR}/aide.log
+report_url=stdout
+#report_url=stderr
+#NOT IMPLEMENTED report_url=mailto:root@...
+#NOT IMPLEMENTED report_url=syslog:LOG_AUTH
+
+# These are the default rules.
+#
+#p: permissions
+#i: inode:
+#n: number of links
+#u: user
+#g: group
+#s: size
+#b: block count
+#m: mtime
+#a: atime
+#c: ctime
+#S: check for growing size
+#acl: Access Control Lists
+#selinux SELinux security context
+#xattrs: Extended file attributes
+#md5: md5 checksum
+#sha1: sha1 checksum
+#sha256: sha256 checksum
+#sha512: sha512 checksum
+#rmd160: rmd160 checksum
+#tiger: tiger checksum
+
+#haval: haval checksum (MHASH only)
+#gost: gost checksum (MHASH only)
+#crc32: crc32 checksum (MHASH only)
+#whirlpool: whirlpool checksum (MHASH only)
+
+FIPSR = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha256
+
+#R: p+i+n+u+g+s+m+c+acl+selinux+xattrs+md5
+#L: p+i+n+u+g+acl+selinux+xattrs
+#E: Empty group
+#>: Growing logfile p+u+g+i+n+S+acl+selinux+xattrs
+
+# You can create custom rules like this.
+# With MHASH...
+# ALLXTRAHASHES = sha1+rmd160+sha256+sha512+whirlpool+tiger+haval+gost+crc32
+ALLXTRAHASHES = sha1+rmd160+sha256+sha512+tiger
+# Everything but access time (Ie. all changes)
+EVERYTHING = R+ALLXTRAHASHES
+
+# Sane, with multiple hashes
+# NORMAL = R+rmd160+sha256+whirlpool
+NORMAL = FIPSR+sha512
+
+# For directories, don't bother doing hashes
+DIR = p+i+n+u+g+acl+selinux+xattrs
+
+# Access control only
+PERMS = p+i+u+g+acl+selinux
+
+# Logfile are special, in that they often change
+LOG = >
+
+# Just do sha256 and sha512 hashes
+LSPP = FIPSR+sha512
+
+# Some files get updated automatically, so the inode/ctime/mtime change
+# but we want to know when the data inside them changes
+DATAONLY = p+n+u+g+s+acl+selinux+xattrs+sha256
+
+# Next decide what directories/files you want in the database.
+
+# Check only permissions, inode, user and group for /etc, but
+# cover some important files closely.
+/bin NORMAL
+/sbin NORMAL
+/lib NORMAL
diff --git a/recipes-ids/aide/aide_0.17.3.bb b/recipes-ids/aide/aide_0.17.3.bb
new file mode 100644
index 0000000..522cd85
--- /dev/null
+++ b/recipes-ids/aide/aide_0.17.3.bb
@@ -0,0 +1,41 @@
+SUMMARY = "Advanced Intrusion Detection Environment"
+HOMEPAGE = "https://aide.github.io"
+LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+LICENSE = "GPL-2.0"
+
+DEPENDS = "bison-native libpcre"
+
+SRC_URI = "https://github.com/aide/aide/releases/download/v${PV}/${BPN}-${PV}.tar.gz \
+ file://aide.conf"
+
+SRC_URI[sha256sum] = "a2eb1883cafaad056fbe43ee1e8ae09fd36caa30a0bc8edfea5d47bd67c464f8"
+
+inherit autotools pkgconfig
+
+PACKAGECONFIG ??=" mhash zlib e2fsattrs \
+ ${@bb.utils.contains('DISTRO_FEATURES', 'selinux', 'selinux audit', '', d)} \
+ ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', 'xattr', '', d)} \
+ "
+PACKAGECONFIG[selinux] = "--with-selinux, --without-selinux, libselinux, libselinux"
+PACKAGECONFIG[zlib] = "--with-zlib, --without-zlib, zlib, zlib "
+PACKAGECONFIG[xattr] = "--with-xattr, --without-xattr, attr, attr"
+PACKAGECONFIG[curl] = "--with-curl, --without-curl, curl, libcurl"
+PACKAGECONFIG[audit] = "--with-audit, --without-audit,"
+PACKAGECONFIG[gcrypt] = "--with-gcrypt, --without-gcrypt, libgcrypt, libgcrypt"
+PACKAGECONFIG[mhash] = "--with-mhash, --without-mhash, libmhash, libmhash"
+PACKAGECONFIG[e2fsattrs] = "--with-e2fsattrs, --without-e2fsattrs, e2fsprogs, e2fsprogs"
+
+do_install_append () {
+ install -d ${D}${libdir}/${PN}/logs
+ install -d ${D}${sysconfdir}
+ install ${WORKDIR}/aide.conf ${D}${sysconfdir}/
+}
+
+CONF_FILE = "${sysconfdir}/aide.conf"
+
+FILES_${PN} += "${libdir}/${PN} ${sysconfdir}/aide.conf"
+
+pkg_postinst_ontarget_${PN} () {
+ /usr/bin/aide -i
+}
+RDPENDS_${PN} = "bison, libpcre"
--
2.25.1


[meta-security][PATCH 4/6] Apparmor: fix multi config build issue.

Armin Kuster
 

Signed-off-by: Armin Kuster <akuster808@...>
---
recipes-mac/AppArmor/apparmor_3.0.bb | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/recipes-mac/AppArmor/apparmor_3.0.bb b/recipes-mac/AppArmor/apparmor_3.0.bb
index 015205d..d9c3e4d 100644
--- a/recipes-mac/AppArmor/apparmor_3.0.bb
+++ b/recipes-mac/AppArmor/apparmor_3.0.bb
@@ -177,8 +177,9 @@ SYSTEMD_AUTO_ENABLE ?= "enable"

PACKAGES += "mod-${PN}"

-FILES_${PN} += "/lib/apparmor/ /lib/security/ ${sysconfdir}/apparmor ${PYTHON_SITEPACKAGES_DIR}"
+FILES_${PN} += "/lib/apparmor/ /lib/security/ ${sysconfdir}/apparmor ${nonarch_libdir}/${PYTHON_DIR}/site-packages"
FILES_mod-${PN} = "${libdir}/apache2/modules/*"
+FILES_${PN}-dbg += "/lib/security/"

DEPENDS_append_libc-musl = " fts "
RDEPENDS_${PN}_libc-musl += "musl-utils"
--
2.25.1


[meta-security][PATCH 3/6] packagegroup-core-security: fix typo for mips

Armin Kuster
 

Signed-off-by: Armin Kuster <akuster808@...>
---
recipes-core/packagegroup/packagegroup-core-security.bb | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/recipes-core/packagegroup/packagegroup-core-security.bb b/recipes-core/packagegroup/packagegroup-core-security.bb
index 6d2dd7c..54b8297 100644
--- a/recipes-core/packagegroup/packagegroup-core-security.bb
+++ b/recipes-core/packagegroup/packagegroup-core-security.bb
@@ -79,8 +79,7 @@ RDEPENDS_packagegroup-security-mac = " \
${@bb.utils.contains("DISTRO_FEATURES", "smack", "smack", "",d)} \
"

-RDEPENDS_packagegroup-security-mac_remove_mips64 = "apparmor"
-RDEPENDS_packagegroup-security-mac_remove_mips64le = "apparmor"
+RDEPENDS_packagegroup-security-mac_remove_mipsarch = "apparmor"

RDEPENDS_packagegroup-meta-security-ptest-packages = "\
ptest-runner \
--
2.25.1


[meta-security][PATCH 2/6] ibmtpm2tss: update to tip

Armin Kuster
 

Signed-off-by: Armin Kuster <akuster808@...>
---
meta-tpm/recipes-tpm2/ibmtpm2tss/ibmtpm2tss_1.6.0.bb | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/meta-tpm/recipes-tpm2/ibmtpm2tss/ibmtpm2tss_1.6.0.bb b/meta-tpm/recipes-tpm2/ibmtpm2tss/ibmtpm2tss_1.6.0.bb
index 4d9b554..ae8974b 100644
--- a/meta-tpm/recipes-tpm2/ibmtpm2tss/ibmtpm2tss_1.6.0.bb
+++ b/meta-tpm/recipes-tpm2/ibmtpm2tss/ibmtpm2tss_1.6.0.bb
@@ -17,11 +17,13 @@ DEPENDS = "openssl ibmswtpm2"

inherit autotools pkgconfig

-SRCREV = "3e736f712ba53c8f06e66751f60fae428fd2e20f"
+SRCREV = "c4e131e34ec0ed09411aa3bc76f76129ef881573"
SRC_URI = " git://git.code.sf.net/p/ibmtpm20tss/tss;nobranch=1 \
file://0001-utils-12-Makefile.am-expand-wildcards-in-prereqs.patch \
"

+UPSTREAM_CHECK_COMMITS = "1"
+
EXTRA_OECONF = "--disable-tpm-1.2"

S = "${WORKDIR}/git"
--
2.25.1


[meta-security][PATCH 1/6] ibmswtpm2: update to 1661

Armin Kuster
 

Drop patch now included in updated

Signed-off-by: Armin Kuster <akuster808@...>
---
.../ibmswtpm2/files/fix-wrong-cast.patch | 27 -------------------
.../{ibmswtpm2_1637.bb => ibmswtpm2_1661.bb} | 10 +++----
2 files changed, 4 insertions(+), 33 deletions(-)
delete mode 100644 meta-tpm/recipes-tpm2/ibmswtpm2/files/fix-wrong-cast.patch
rename meta-tpm/recipes-tpm2/ibmswtpm2/{ibmswtpm2_1637.bb => ibmswtpm2_1661.bb} (69%)

diff --git a/meta-tpm/recipes-tpm2/ibmswtpm2/files/fix-wrong-cast.patch b/meta-tpm/recipes-tpm2/ibmswtpm2/files/fix-wrong-cast.patch
deleted file mode 100644
index f2938e0..0000000
--- a/meta-tpm/recipes-tpm2/ibmswtpm2/files/fix-wrong-cast.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Fix strict aliasing issue of gcc10
-
-fixes:
-
-TpmFail.c: In function 'TpmLogFailure':
-TpmFail.c:217:23: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing]
- 217 | s_failFunction = *(UINT32 *)&function; /* kgold */
- | ^~~~~~~~~~~~~~~~~~~
-cc1: all warnings being treated as errors
-
-Upstream-Status: Submitted
-
-Signed-off-by: Jens Rehsack <sno@...>
-
-Index: src/TpmFail.c
-===================================================================
---- src.orig/TpmFail.c 2020-09-10 15:43:57.085063875 +0200
-+++ src/TpmFail.c 2020-09-10 15:48:35.563302634 +0200
-@@ -214,7 +214,7 @@
- // On a 64-bit machine, this may truncate the address of the string
- // of the function name where the error occurred.
- #if FAIL_TRACE
-- s_failFunction = *(UINT32 *)&function; /* kgold */
-+ memcpy(&s_failFunction, function, sizeof(uint32_t)); /* kgold */
- s_failLine = line;
- #else
- s_failFunction = 0;
diff --git a/meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1637.bb b/meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1661.bb
similarity index 69%
rename from meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1637.bb
rename to meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1661.bb
index 301980d..7ea40a8 100644
--- a/meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1637.bb
+++ b/meta-tpm/recipes-tpm2/ibmswtpm2/ibmswtpm2_1661.bb
@@ -17,13 +17,11 @@ DEPENDS = "openssl"

SRC_URI = "https://sourceforge.net/projects/ibmswtpm2/files/ibmtpm${PV}.tar.gz \
file://tune-makefile.patch \
- file://fix-wrong-cast.patch \
"
-SRC_URI[md5sum] = "43b217d87056e9155633925eb6ef749c"
-SRC_URI[sha256sum] = "dd3a4c3f7724243bc9ebcd5c39bbf87b82c696d1c1241cb8e5883534f6e2e327"
-SRC_URI[sha1sum] = "ab4b94079e57a86996991e8a2b749ce063e4ad3e"
-SRC_URI[sha384sum] = "bbef16a934853ce78cba7ddc766aa9d7ef3cde3430a322b1be772bf3ad4bd6d413ae9c4de21bc1a4879d17dfe2aadc1d"
-SRC_URI[sha512sum] = "007aa415cccf19a2bcf789c426727dc4032dcb04cc9d11eedc231d2add708c1134d3d5ee5cfbe7de68307c95fff7a30bd306fbd8d53c198a5ef348440440a6ed"
+
+SRC_URI[sha256sum] = "55145928ad2b24f34be6a0eacf9fb492e10e0ea919b8428c721fa970e85d6147"
+
+UPSTREAM_CHECK_REGEX = "libtpm(?P<pver>).tar.gz"

S = "${WORKDIR}/src"

--
2.25.1

5201 - 5220 of 58675