Date   

[Package Report System]Upgrade recipes name list

Yocto Project Package Report System <package-reporting@...>
 

This mail was sent out by Package Report System.
This message list those recipes which need to be upgraded. If maintainers believe some of them needn't to upgrade this time, they can fill in RECIPE_NO_UPDATE_REASON_pn-"xxx" in upstream_tracking files to ignore this recipe remainder until newer upstream version was detected.
Example:
RECIPE_NO_UPDATE_REASON_pn-"xxx" = "Not upgrade to 2.0 because the new version is unstable"
You can check the detail information at http://packages.yoctoproject.org/upgradepkgname


PackageName Version UpVersion Maintainer NoUpgradeReason
Upgradable Count: 0
Upgrade Total Count: 0
The based commit merge time is:
Wed Jul 24 11:35:39 2013 +0100
The based commit is:
commit 67864ca79da08df752487a3a4e1a975546da123d
Author: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Date: Fri Jul 19 16:53:25 2013 +0500
Any problem, please contact Saul Wold <sgw@linux.intel.com>


Warning! Some failures happened on pkg-report system!

Yocto Project Package Report System <package-reporting@...>
 

Already up-to-date.
Already up-to-date.
Now updating daily_check database, please wait for a minute......
Now updating daily_check database, please wait for a minute......
Now updating pkginfotable,please wait a minute........
['Package', 'Version', 'Upver', 'License', 'Section', 'Home', 'Release', 'Depends', 'BugTracker', 'PE', 'Description', 'Status', 'Tracking', 'URI', 'MAINTAINER', 'NoUpReason']
['grub-efi-i586-native', '2.00', '2.00', 'GPLv3', 'bootloaders', 'http://www.gnu.org/software/grub/', 'r2', 'autoconf-native automake-native libtool-native gnu-config-native gettext-minimal-native autogen-native', 'None', 'None', 'GRUB2 is the next generaion of a GPLed bootloader intended to unify bootloading across x86 operating systems. In addition to loading the Linux kernel, it implements the Multiboot standard, which allows for flexible loading of multiple boot images. This recipe builds an EFI binary for the target. It does not install or package anything, it only deploys a target-arch GRUB EFI image.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/grub/grub-2.00.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (grub-efi-i586-native,2.00,2.00,GPLv3,bootloaders,r2,None,http://www.gnu.org/software/grub/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native gettext-minimal-native autogen-native,GRUB2 is the next generaion of a GPLed bootloader intended to unify bootloading across x86 operating systems. In addition to loading the Linux kernel, it implements the Multiboot standard, which allows for flexible loading of multiple boot images. This recipe builds an EFI binary for the target. It does not install or package anything, it only deploys a target-arch GRUB EFI image.,N/A,ftp://ftp.gnu.org/gnu/grub/grub-2.00.tar.gz,Saul Wold <sgw@linux.intel.com>)
Traceback (most recent call last):
File "info_to_db.py", line 59, in <module>
cu.execute( "insert or replace into pkginfotable values (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)", (pname,pversion,pupver,plicense,psection,prelease,ppe,phomepage,pbugtracker,pstatus,pdepends,pdescription,pmver,psrcuri,pmt))
sqlite3.OperationalError: table pkginfotable has 17 columns but 15 values were supplied
REPORT-SYSTEM-UPDATE ERROR: Update database faild!
Now updating pkgrecord table and generate new upgr_hist table, please wait a minute......
Traceback (most recent call last):
File "upgrade_history_to_db.py", line 79, in <module>
track_upgrade_history(item)
File "upgrade_history_to_db.py", line 48, in track_upgrade_history
upg_histy_cu.execute('insert into pkgrecord values (?,?,?)', (record[0], record[1], record[2]))
sqlite3.OperationalError: no such table: pkgrecord
REPORT-SYSTEM-UPDATE ERROR: Run upgrade_history_to_db.py faild!
['milestone_target_to_db.py', '2013-06-22']
Opening databse /srv/www/vhosts/packages.yoctoproject.org/python-function/../newserver/webserver/pkginfo.sqlite for querying
Now updating pkginfotable,please wait a minute........
['Package', 'Version', 'Upver', 'License', 'Section', 'Home', 'Release', 'Depends', 'BugTracker', 'PE', 'Description', 'Status', 'Tracking', 'URI', 'MAINTAINER', 'NoUpReason']
['grub-efi-i586-native', '2.00', '2.00', 'GPLv3', 'bootloaders', 'http://www.gnu.org/software/grub/', 'r2', 'autoconf-native automake-native libtool-native gnu-config-native gettext-minimal-native autogen-native', 'None', 'None', 'GRUB2 is the next generaion of a GPLed bootloader intended to unify bootloading across x86 operating systems. In addition to loading the Linux kernel, it implements the Multiboot standard, which allows for flexible loading of multiple boot images. This recipe builds an EFI binary for the target. It does not install or package anything, it only deploys a target-arch GRUB EFI image.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/grub/grub-2.00.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (grub-efi-i586-native,2.00,2.00,GPLv3,bootloaders,r2,None,http://www.gnu.org/software/grub/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native gettext-minimal-native autogen-native,GRUB2 is the next generaion of a GPLed bootloader intended to unify bootloading across x86 operating systems. In addition to loading the Linux kernel, it implements the Multiboot standard, which allows for flexible loading of multiple boot images. This recipe builds an EFI binary for the target. It does not install or package anything, it only deploys a target-arch GRUB EFI image.,N/A,ftp://ftp.gnu.org/gnu/grub/grub-2.00.tar.gz,Saul Wold <sgw@linux.intel.com>)
['busybox', '1.21.1', '1.21.1', 'GPLv2 & bzip2', 'base', 'http://www.busybox.net', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc kern-tools-native update-rc.d-native virtual/update-alternatives', 'https://bugs.busybox.net/', 'None', 'BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for most of the utilities you usually find in GNU fileutils, shellutils, etc. The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. BusyBox provides a fairly complete POSIX environment for any small or embedded system.', 'MATCH', 'N/A', 'http://www.busybox.net/downloads/busybox-1.21.1.tar.bz2;name=tarball', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (busybox,1.21.1,1.21.1,GPLv2 & bzip2,base,r0,None,http://www.busybox.net,https://bugs.busybox.net/,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc kern-tools-native update-rc.d-native virtual/update-alternatives,BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for most of the utilities you usually find in GNU fileutils, shellutils, etc. The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. BusyBox provides a fairly complete POSIX environment for any small or embedded system.,N/A,http://www.busybox.net/downloads/busybox-1.21.1.tar.bz2;name=tarball,Radu Moisan <radu.moisan@intel.com>)
['telepathy-mission-control', '5.14.0', '5.15.0', 'LGPLv2.1+', 'libs', 'http://mission-control.sourceforge.net/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtelepathy dbus-glib gconf libxslt-native python-native ', 'None', 'None', 'Central control for Telepathy connection managers', 'UPDATE', 'N/A', 'http://telepathy.freedesktop.org/releases/telepathy-mission-control/telepathy-mission-control-5.14.0.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (telepathy-mission-control,5.14.0,5.15.0,LGPLv2.1+,libs,r0,None,http://mission-control.sourceforge.net/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtelepathy dbus-glib gconf libxslt-native python-native ,Central control for Telepathy connection managers,N/A,http://telepathy.freedesktop.org/releases/telepathy-mission-control/telepathy-mission-control-5.14.0.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['base-files', '3.0.14', 'INVALID', 'GPLv2', 'base', 'unknown', 'r73', ' ', 'None', 'None', 'The base-files package creates the basic system directory structure and provides a small set of key configuration files for the system.', 'MATCH', 'N/A', 'file://rotation', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (base-files,3.0.14,INVALID,GPLv2,base,r73,None,unknown,None,MATCH, ,The base-files package creates the basic system directory structure and provides a small set of key configuration files for the system.,N/A,file://rotation,Saul Wold <sgw@linux.intel.com>)
['pth', '2.0.7', '2.0.7', 'GPLv2+', 'libs', 'http://www.gnu.org/software/pth/', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'GNU Portable Threads', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/pth/pth-2.0.7.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (pth,2.0.7,2.0.7,GPLv2+,libs,r3,None,http://www.gnu.org/software/pth/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,GNU Portable Threads,N/A,ftp://ftp.gnu.org/gnu/pth/pth-2.0.7.tar.gz,Saul Wold <sgw@linux.intel.com>)
['iputils', 's20121221', 's20121221', 'BSD & GPLv2+', 'console/network', 'http://www.skbuff.net/iputils', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls docbook-utils-native sgmlspl-native libcap virtual/update-alternatives', 'None', 'None', 'Utilities for the IP protocol, including traceroute6, tracepath, tracepath6, ping, ping6 and arping.', 'MATCH', 'N/A', 'http://www.skbuff.net/iputils/iputils-s20121221.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (iputils,s20121221,s20121221,BSD & GPLv2+,console/network,r0,None,http://www.skbuff.net/iputils,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls docbook-utils-native sgmlspl-native libcap virtual/update-alternatives,Utilities for the IP protocol, including traceroute6, tracepath, tracepath6, ping, ping6 and arping.,N/A,http://www.skbuff.net/iputils/iputils-s20121221.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['sysfsutils', '2.1.0', '2.1.0', 'GPLv2 & LGPLv2.1', 'base', 'http://linux-diag.sourceforge.net/Sysfsutils.html', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', "Tools for working with the sysfs virtual filesystem. The tool 'systool' can query devices by bus, class and topology.", 'MATCH', 'N/A', 'http://downloads.sourceforge.net/linux-diag/sysfsutils-2.1.0.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (sysfsutils,2.1.0,2.1.0,GPLv2 & LGPLv2.1,base,r5,None,http://linux-diag.sourceforge.net/Sysfsutils.html,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Tools for working with the sysfs virtual filesystem. The tool 'systool' can query devices by bus, class and topology.,N/A,http://downloads.sourceforge.net/linux-diag/sysfsutils-2.1.0.tar.gz,Saul Wold <sgw@linux.intel.com>)
['qemu-helper-native', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r1', ' ', 'None', 'None', 'Qemu helper utilities from Poky', 'MATCH', 'N/A', 'file://tunctl.c', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (qemu-helper-native,1.0,INVALID,GPLv2,base,r1,None,unknown,None,MATCH, ,Qemu helper utilities from Poky,N/A,file://tunctl.c,Constantin Musca <constantinx.musca@intel.com>)
['gstreamer1.0-plugins-good', '1.0.7', '1.1.2', 'GPLv2+ & LGPLv2.1+', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base gconf zlib bzip2 gconf gconf-native speex flac gdk-pixbuf cairo pulseaudio jpeg libsoup-2.4 taglib libpng virtual/libx11 libsm libxrender', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer 1.x', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0-plugins-good,1.0.7,1.1.2,GPLv2+ & LGPLv2.1+,multimedia,r1,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base gconf zlib bzip2 gconf gconf-native speex flac gdk-pixbuf cairo pulseaudio jpeg libsoup-2.4 taglib libpng virtual/libx11 libsm libxrender,Plugins for GStreamer 1.x,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['gdbm', '1.10', '1.10', 'GPLv3', 'libs', 'http://www.gnu.org/software/gdbm/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'GNU dbm is a set of database routines that use extensible hashing.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gdbm/gdbm-1.10.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (gdbm,1.10,1.10,GPLv3,libs,r3,None,http://www.gnu.org/software/gdbm/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,GNU dbm is a set of database routines that use extensible hashing.,N/A,ftp://ftp.gnu.org/gnu/gdbm/gdbm-1.10.tar.gz,Saul Wold <sgw@linux.intel.com>)
['binutils-cross', '2.23.2', '2.23.2', 'GPLv3', 'devel', 'http://www.gnu.org/software/binutils/', 'r4', ' flex-native bison-native zlib-native', 'http://sourceware.org/bugzilla/', 'None', 'The GNU Binutils are a collection of binary tools. The main ones are ld (GNU Linker), and as (GNU Assembler). This package also includes addition tools such as addr2line (Converts addresses into filenames and line numbers), ar (utility for creating, modifying and extracting archives), nm (list symbols in object files), objcopy (copy and translate object files), objdump (Display object information), and other tools and related libraries.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/binutils/binutils-2.23.2.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (binutils-cross,2.23.2,2.23.2,GPLv3,devel,r4,None,http://www.gnu.org/software/binutils/,http://sourceware.org/bugzilla/,MATCH, flex-native bison-native zlib-native,The GNU Binutils are a collection of binary tools. The main ones are ld (GNU Linker), and as (GNU Assembler). This package also includes addition tools such as addr2line (Converts addresses into filenames and line numbers), ar (utility for creating, modifying and extracting archives), nm (list symbols in object files), objcopy (copy and translate object files), objdump (Display object information), and other tools and related libraries.,N/A,ftp://ftp.gnu.org/gnu/binutils/binutils-2.23.2.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['gpgme', '1.4.2', '1.4.2', 'GPLv2+ & LGPLv2.1+', 'base', 'http://www.gnupg.org/gpgme.html', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libgpg-error libassuan pth', 'https://bugs.g10code.com/gnupg/index', 'None', 'GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications. It provides a High-Level Crypto API for encryption, decryption, signing, signature verification and key management', 'MATCH', 'N/A', 'ftp://ftp.gnupg.org/gcrypt/gpgme/gpgme-1.4.2.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gpgme,1.4.2,1.4.2,GPLv2+ & LGPLv2.1+,base,r0,None,http://www.gnupg.org/gpgme.html,https://bugs.g10code.com/gnupg/index,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libgpg-error libassuan pth,GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications. It provides a High-Level Crypto API for encryption, decryption, signing, signature verification and key management,N/A,ftp://ftp.gnupg.org/gcrypt/gpgme/gpgme-1.4.2.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['xserver-xorg', '1.14.0', '1.14.99.1', 'MIT-X', 'x11/base', 'http://www.x.org', 'r8.1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc randrproto renderproto fixesproto damageproto xextproto xproto xf86dgaproto xf86miscproto xf86vidmodeproto compositeproto recordproto resourceproto videoproto scrnsaverproto xineramaproto fontsproto kbproto inputproto bigreqsproto xcmiscproto pixman libxfont xtrans libxau libxext libxdmcp libdrm libxkbfile libpciaccess openssl libgcrypt font-util glproto mesa xf86driproto glproto virtual/libgl virtual/libx11 udev dri2proto', 'None', '2', 'The X.Org X server', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/xserver/xorg-server-1.14.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xserver-xorg,1.14.0,1.14.99.1,MIT-X,x11/base,r8.1,2,http://www.x.org,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc randrproto renderproto fixesproto damageproto xextproto xproto xf86dgaproto xf86miscproto xf86vidmodeproto compositeproto recordproto resourceproto videoproto scrnsaverproto xineramaproto fontsproto kbproto inputproto bigreqsproto xcmiscproto pixman libxfont xtrans libxau libxext libxdmcp libdrm libxkbfile libpciaccess openssl libgcrypt font-util glproto mesa xf86driproto glproto virtual/libgl virtual/libx11 udev dri2proto,The X.Org X server,N/A,http://xorg.freedesktop.org/releases/individual/xserver/xorg-server-1.14.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['swabber-native', '0.0+gitAUTOINC+2d1fe36fb0', '0.0+gitAUTOINC+2d1fe36', 'GPLv2', 'base', 'http://git.yoctoproject.org/cgit/cgit.cgi/swabber', 'r0', ' ', 'None', 'None', "Swabber is a tool that can help with understanding a program's use of host files.", 'MATCH', 'N/A', 'git://git.yoctoproject.org/swabber;protocol=git', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (swabber-native,0.0+gitAUTOINC+2d1fe36fb0,0.0+gitAUTOINC+2d1fe36,GPLv2,base,r0,None,http://git.yoctoproject.org/cgit/cgit.cgi/swabber,None,MATCH, ,Swabber is a tool that can help with understanding a program's use of host files.,N/A,git://git.yoctoproject.org/swabber;protocol=git,Saul Wold <sgw@linux.intel.com>)
['libpng12', '1.2.50', 'N/A', 'Libpng', 'libs', 'http://www.libpng.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib', 'None', 'None', 'PNG Library', 'ErrParseInterDir:/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz:1.2.50:-:downloads.sourceforge.net/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz', '1.2.50', 'http://downloads.sourceforge.net/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (libpng12,1.2.50,N/A,Libpng,libs,r0,None,http://www.libpng.org/,None,ErrParseInterDir:/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz:1.2.50:-:downloads.sourceforge.net/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib,PNG Library,1.2.50,http://downloads.sourceforge.net/project/libpng/libpng12/1.2.50/libpng-1.2.50.tar.xz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['ldconfig-native', '2.12.1', 'INVALID', 'GPLv2+', 'base', 'unknown', 'r2', ' ', 'None', 'None', 'A standalone native ldconfig build', 'MATCH', 'N/A', 'file://ldconfig-native-2.12.1.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (ldconfig-native,2.12.1,INVALID,GPLv2+,base,r2,None,unknown,None,MATCH, ,A standalone native ldconfig build,N/A,file://ldconfig-native-2.12.1.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['xset', '1.2.2', '1.2.2', 'MIT', 'x11/apps', 'http://www.x.org/', 'r8.2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxext libxxf86misc libxmu libxau', 'https://bugs.freedesktop.org', '1', 'xset is a utility that is used to set various user preference options of the display.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xset-1.2.2.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xset,1.2.2,1.2.2,MIT,x11/apps,r8.2,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxext libxxf86misc libxmu libxau,xset is a utility that is used to set various user preference options of the display.,N/A,http://xorg.freedesktop.org/releases/individual/app/xset-1.2.2.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['dropbear', '2013.58', '2013.58', 'MIT', 'console/network', 'http://matt.ucc.asn.au/dropbear/dropbear.html', 'r1.0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib update-rc.d-native virtual/update-alternatives', 'None', 'None', 'Dropbear is a lightweight SSH and SCP implementation', 'MATCH', 'N/A', 'http://matt.ucc.asn.au/dropbear/releases/dropbear-2013.58.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (dropbear,2013.58,2013.58,MIT,console/network,r1.0,None,http://matt.ucc.asn.au/dropbear/dropbear.html,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib update-rc.d-native virtual/update-alternatives,Dropbear is a lightweight SSH and SCP implementation,N/A,http://matt.ucc.asn.au/dropbear/releases/dropbear-2013.58.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['bluez-hcidump', '2.5', '2.5', 'GPLv2+', 'console', 'unknown', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bluez4', 'None', 'None', 'The hcidump tool reads raw HCI data coming from and going to a Bluetooth device and displays the commands, events and data in a human-readable form.', 'MATCH', 'N/A', 'http://www.kernel.org/pub/linux/bluetooth/bluez-hcidump-2.5.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (bluez-hcidump,2.5,2.5,GPLv2+,console,r1,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bluez4,The hcidump tool reads raw HCI data coming from and going to a Bluetooth device and displays the commands, events and data in a human-readable form.,N/A,http://www.kernel.org/pub/linux/bluetooth/bluez-hcidump-2.5.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['genext2fs', '1.4.1', '1.4.1', 'GPLv2', 'console/utils', 'http://genext2fs.sourceforge.net/', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A tool to generate an ext2 filesystem as a normal (non-root) user.', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.4.1.orig.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (genext2fs,1.4.1,1.4.1,GPLv2,console/utils,r2,None,http://genext2fs.sourceforge.net/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A tool to generate an ext2 filesystem as a normal (non-root) user.,N/A,ftp://ftp.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.4.1.orig.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libcgroup', '0.38', '0.38', 'LGPLv2.1', 'libs', 'unknown', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'libcgroup is a library that abstracts the control group file system in Linux. Control groups allow you to limit, account and isolate resource usage (CPU, memory, disk I/O, etc.) of groups of processes.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/project/libcg/libcgroup/v.038/libcgroup-0.38.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libcgroup,0.38,0.38,LGPLv2.1,libs,r1,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,libcgroup is a library that abstracts the control group file system in Linux. Control groups allow you to limit, account and isolate resource usage (CPU, memory, disk I/O, etc.) of groups of processes.,N/A,http://downloads.sourceforge.net/project/libcg/libcgroup/v.038/libcgroup-0.38.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['kbproto', '1.0.6', '1.0.6', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Keyboard extension. This extension is used to control options related to keyboard handling and layout.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/kbproto-1.0.6.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (kbproto,1.0.6,1.0.6,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Keyboard extension. This extension is used to control options related to keyboard handling and layout.,N/A,http://xorg.freedesktop.org/releases/individual/proto/kbproto-1.0.6.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['python-setuptools', '0.6c11', '0.6c11', 'PSF', 'devel/python', 'http://cheeseshop.python.org/pypi/setuptools', 'ml5', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python python-native python python-native ', 'None', 'None', 'Download, build, install, upgrade, and uninstall Python packages', 'MATCH', 'N/A', 'http://cheeseshop.python.org/packages/source/s/setuptools/setuptools-0.6c11.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-setuptools,0.6c11,0.6c11,PSF,devel/python,ml5,None,http://cheeseshop.python.org/pypi/setuptools,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python python-native python python-native ,Download, build, install, upgrade, and uninstall Python packages,N/A,http://cheeseshop.python.org/packages/source/s/setuptools/setuptools-0.6c11.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['unzip', '6.0', '60', 'BSD-3-Clause', 'console/utils', 'http://www.info-zip.org', 'r4', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', '1', 'A (de)compression library for the ZIP format', 'UPDATE', '6.0', 'ftp://ftp.info-zip.org/pub/infozip/src/unzip60.tgz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (unzip,6.0,60,BSD-3-Clause,console/utils,r4,1,http://www.info-zip.org,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A (de)compression library for the ZIP format,6.0,ftp://ftp.info-zip.org/pub/infozip/src/unzip60.tgz,Radu Moisan <radu.moisan@intel.com>)
['libusb-compat', '0.1.5', '0.1.5', 'LGPLv2.1+', 'libs', 'http://www.libusb.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libusb1', 'http://www.libusb.org/report', '1', 'libusb-0.1 compatible layer for libusb1, a drop-in replacement that aims to look, feel and behave exactly like libusb-0.1', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/libusb/libusb-compat-0.1.5.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libusb-compat,0.1.5,0.1.5,LGPLv2.1+,libs,r0,1,http://www.libusb.org/,http://www.libusb.org/report,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libusb1,libusb-0.1 compatible layer for libusb1, a drop-in replacement that aims to look, feel and behave exactly like libusb-0.1,N/A,http://downloads.sourceforge.net/libusb/libusb-compat-0.1.5.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['gnome-common', '3.7.4', '3.7.4', 'GPLv2+', 'x11/gnome', 'http://www.gnome.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native ', 'https://bugzilla.gnome.org/', 'None', 'Common macros for building GNOME applications', 'MATCH', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/gnome-common/3.7/gnome-common-3.7.4.tar.xz;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gnome-common,3.7.4,3.7.4,GPLv2+,x11/gnome,r0,None,http://www.gnome.org/,https://bugzilla.gnome.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native ,Common macros for building GNOME applications,N/A,http://ftp.gnome.org/pub/GNOME/sources/gnome-common/3.7/gnome-common-3.7.4.tar.xz;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['libxfont', '1.4.5', '1.4.6', 'MIT & MIT-style & BSD', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros freetype xtrans fontsproto libfontenc zlib', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libXfont provides various services for X servers, most notably font selection and rasterisation (through external libraries such as freetype).', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXfont-1.4.5.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxfont,1.4.5,1.4.6,MIT & MIT-style & BSD,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros freetype xtrans fontsproto libfontenc zlib,libXfont provides various services for X servers, most notably font selection and rasterisation (through external libraries such as freetype).,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXfont-1.4.5.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['puzzles', 'r9765', '9893', 'MIT', 'base', 'http://www.chiark.greenend.org.uk/~sgtatham/puzzles/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libxt', 'None', 'None', "Simon Tatham's Portable Puzzle Collection", 'UPDATE', 'N/A', 'svn://svn.tartarus.org/sgt;module=puzzles;rev=9765;protocol=svn', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (puzzles,r9765,9893,MIT,base,r0,None,http://www.chiark.greenend.org.uk/~sgtatham/puzzles/,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libxt,Simon Tatham's Portable Puzzle Collection,N/A,svn://svn.tartarus.org/sgt;module=puzzles;rev=9765;protocol=svn,Constantin Musca <constantinx.musca@intel.com>)
['libnewt-python', '0.52.14', '0.52.14', 'LGPLv2', 'libs', 'https://fedorahosted.org/newt/', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libnewt python python-native ', 'None', 'None', 'Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. This package also contains the shared library needed by programs built with newt, as well as a /usr/bin/dialog replacement called whiptail. Newt is based on the slang library.', 'MATCH', 'N/A', 'https://fedorahosted.org/releases/n/e/newt/newt-0.52.14.tar.gz', 'None', 'None']
inserted (libnewt-python,0.52.14,0.52.14,LGPLv2,libs,r2,None,https://fedorahosted.org/newt/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libnewt python python-native ,Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. This package also contains the shared library needed by programs built with newt, as well as a /usr/bin/dialog replacement called whiptail. Newt is based on the slang library.,N/A,https://fedorahosted.org/releases/n/e/newt/newt-0.52.14.tar.gz,None)
['gtk+', '2.24.18', '3.9.8', 'LGPLv2 & LGPLv2+ & LGPLv2.1+', 'libs', 'http://www.gtk.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native glib-2.0 pango atk jpeg libpng gdk-pixbuf-native docbook-utils-native cairo gdk-pixbuf gtk-doc-stub-native virtual/libx11 libxext libxcursor libxrandr libxdamage libxrender libxcomposite virtual/update-alternatives', 'https://bugzilla.gnome.org/', 'None', 'GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off projects to complete application suites.', 'UPDATE', 'N/A', 'http://download.gnome.org/sources/gtk+/2.24/gtk+-2.24.18.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'Do not upgrade to version: 2.99.2 because prefer stable tree']
inserted (gtk+,2.24.18,3.9.8,LGPLv2 & LGPLv2+ & LGPLv2.1+,libs,r0,None,http://www.gtk.org,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native glib-2.0 pango atk jpeg libpng gdk-pixbuf-native docbook-utils-native cairo gdk-pixbuf gtk-doc-stub-native virtual/libx11 libxext libxcursor libxrandr libxdamage libxrender libxcomposite virtual/update-alternatives,GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off projects to complete application suites.,N/A,http://download.gnome.org/sources/gtk+/2.24/gtk+-2.24.18.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['lttng-modules', '2.2.0+gitAUTOINC+1b26381c19', '2.3.0+gitAUTOINC+5420784', 'LGPLv2.1 & GPLv2', 'devel', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel virtual/kernel', 'None', 'None', 'The lttng-modules 2.0 package contains the kernel tracer modules', 'UPDATE', 'N/A', 'git://git.lttng.org/lttng-modules.git;protocol=git', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (lttng-modules,2.2.0+gitAUTOINC+1b26381c19,2.3.0+gitAUTOINC+5420784,LGPLv2.1 & GPLv2,devel,r0,None,unknown,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel virtual/kernel,The lttng-modules 2.0 package contains the kernel tracer modules,N/A,git://git.lttng.org/lttng-modules.git;protocol=git,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['gnutls', '2.12.23', '2.12.23', 'GPLv3+ & LGPLv2.1+', 'base', 'http://www.gnu.org/software/gnutls/', 'r8.4', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib lzo libtasn1 libgcrypt (>= 1.4.2) libcap readline', 'https://savannah.gnu.org/support/?group=gnutls', 'None', 'GNU Transport Layer Security Library', 'MATCH', 'N/A', 'ftp://ftp.gnutls.org/gcrypt/gnutls/v2.12/gnutls-2.12.23.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gnutls,2.12.23,2.12.23,GPLv3+ & LGPLv2.1+,base,r8.4,None,http://www.gnu.org/software/gnutls/,https://savannah.gnu.org/support/?group=gnutls,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib lzo libtasn1 libgcrypt (>= 1.4.2) libcap readline,GNU Transport Layer Security Library,N/A,ftp://ftp.gnutls.org/gcrypt/gnutls/v2.12/gnutls-2.12.23.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['apmd', '3.2.2-14', '3.2.2-14', 'GPLv2+', 'base', 'http://apenwarr.ca/apmd/', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-cross update-rc.d-native', 'None', 'None', 'The Advanced Power Management (APM) support provides access to battery status information and a set of tools for managing notebook power consumption.', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/a/apmd/apmd_3.2.2.orig.tar.gz;name=tarball', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (apmd,3.2.2-14,3.2.2-14,GPLv2+,base,r2,None,http://apenwarr.ca/apmd/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-cross update-rc.d-native,The Advanced Power Management (APM) support provides access to battery status information and a set of tools for managing notebook power consumption.,N/A,ftp://ftp.debian.org/debian/pool/main/a/apmd/apmd_3.2.2.orig.tar.gz;name=tarball,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['libxscrnsaver', '1.2.2', '1.2.2', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext scrnsaverproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The X Window System provides support for changing the image on a display screen after a user-settable period of inactivity to avoid burning the cathode ray tube phosphors. However, no interfaces are provided for the user to control the image that is drawn. This extension allows an external \\"screen saver\\" client to detect when the alternate image is to be displayed and to provide the graphics.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXScrnSaver-1.2.2.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxscrnsaver,1.2.2,1.2.2,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext scrnsaverproto,The X Window System provides support for changing the image on a display screen after a user-settable period of inactivity to avoid burning the cathode ray tube phosphors. However, no interfaces are provided for the user to control the image that is drawn. This extension allows an external \"screen saver\" client to detect when the alternate image is to be displayed and to provide the graphics.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXScrnSaver-1.2.2.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['gst-plugins-bad', '0.10.23', '1.1.2', 'GPLv2+ & LGPLv2+ & LGPLv2.1+ ', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r4', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base glib-2.0-native bzip2 librsvg curl', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-0.10.23.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'not compatible with gst-fluendo 0.10.x']
inserted (gst-plugins-bad,0.10.23,1.1.2,GPLv2+ & LGPLv2+ & LGPLv2.1+ ,multimedia,r4,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base glib-2.0-native bzip2 librsvg curl,Plugins for GStreamer,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-0.10.23.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['npth', '0.91', '0.91', 'LGPLv3+ & GPLv2+', 'libs', 'http://www.gnupg.org/software/pth/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'New GNU Portable Threads', 'MATCH', 'N/A', 'ftp://ftp.gnupg.org/gcrypt/npth/npth-0.91.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (npth,0.91,0.91,LGPLv3+ & GPLv2+,libs,r0,None,http://www.gnupg.org/software/pth/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,New GNU Portable Threads,N/A,ftp://ftp.gnupg.org/gcrypt/npth/npth-0.91.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['ghostscript', '9.07', '9.07', 'GPLv3', 'console/utils', 'http://www.ghostscript.com', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ghostscript-native tiff jpeg fontconfig cups', 'None', 'None', 'Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. Furthermore, it can render PostScript and PDF files as graphics to be printed on non-PostScript printers. Supported printers include common dot-matrix, inkjet and laser models. Package gsfonts contains a set of standard fonts for Ghostscript. ', 'MATCH', 'N/A', 'http://downloads.ghostscript.com/public/ghostscript-9.07.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (ghostscript,9.07,9.07,GPLv3,console/utils,r0,None,http://www.ghostscript.com,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ghostscript-native tiff jpeg fontconfig cups,Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. Furthermore, it can render PostScript and PDF files as graphics to be printed on non-PostScript printers. Supported printers include common dot-matrix, inkjet and laser models. Package gsfonts contains a set of standard fonts for Ghostscript. ,N/A,http://downloads.ghostscript.com/public/ghostscript-9.07.tar.gz,Kai Kang <kai.kang@windriver.com>)
['sysvinit', '2.88dsf', '2.88dsf', 'GPLv2+', 'base', 'http://savannah.nongnu.org/projects/sysvinit/', 'r11', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc base-passwd shadow-native shadow-sysroot shadow update-rc.d-native virtual/update-alternatives', 'None', 'None', 'This package is required to boot in most configurations. It provides the /sbin/init program. This is the first process started on boot, and the last process terminated before the system halts.', 'MATCH', 'N/A', 'http://download.savannah.gnu.org/releases-noredirect/sysvinit/sysvinit-2.88dsf.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (sysvinit,2.88dsf,2.88dsf,GPLv2+,base,r11,None,http://savannah.nongnu.org/projects/sysvinit/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc base-passwd shadow-native shadow-sysroot shadow update-rc.d-native virtual/update-alternatives,This package is required to boot in most configurations. It provides the /sbin/init program. This is the first process started on boot, and the last process terminated before the system halts.,N/A,http://download.savannah.gnu.org/releases-noredirect/sysvinit/sysvinit-2.88dsf.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['telepathy-idle', '0.1.14', '0.1.16', 'LGPLv2.1', 'base', 'http://telepathy.freedesktop.org/wiki/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus telepathy-glib openssl libxslt-native python-native ', 'None', 'None', 'Telepathy implementation of the Internet Relay Chat protocols.', 'UPDATE', 'N/A', 'http://telepathy.freedesktop.org/releases/telepathy-idle/telepathy-idle-0.1.14.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (telepathy-idle,0.1.14,0.1.16,LGPLv2.1,base,r0,None,http://telepathy.freedesktop.org/wiki/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus telepathy-glib openssl libxslt-native python-native ,Telepathy implementation of the Internet Relay Chat protocols.,N/A,http://telepathy.freedesktop.org/releases/telepathy-idle/telepathy-idle-0.1.14.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['libxcomposite', '0.4.4', '0.4.4', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros compositeproto virtual/libx11 libxfixes libxext', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The composite extension provides three related mechanisms: per-hierarchy storage, automatic shadow update, and external parent. In per-hierarchy storage, the rendering of an entire hierarchy of windows is redirected to off-screen storage. In automatic shadow update, when a hierarchy is rendered off-screen, the X server provides an automatic mechanism for presenting those contents within the parent window. In external parent, a mechanism for providing redirection of compositing transformations through a client.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXcomposite-0.4.4.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxcomposite,0.4.4,0.4.4,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros compositeproto virtual/libx11 libxfixes libxext,The composite extension provides three related mechanisms: per-hierarchy storage, automatic shadow update, and external parent. In per-hierarchy storage, the rendering of an entire hierarchy of windows is redirected to off-screen storage. In automatic shadow update, when a hierarchy is rendered off-screen, the X server provides an automatic mechanism for presenting those contents within the parent window. In external parent, a mechanism for providing redirection of compositing transformations through a client.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXcomposite-0.4.4.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libid3tag', '0.15.1b', '0.15.1b', 'GPLv2+', 'libs', 'http://sourceforge.net/projects/mad/', 'r7', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib gperf-native', 'http://sourceforge.net/tracker/?group_id=12349&atid=112349', 'None', 'Library for interacting with ID3 tags.', 'MATCH', 'N/A', 'ftp://ftp.mars.org/pub/mpeg/libid3tag-0.15.1b.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libid3tag,0.15.1b,0.15.1b,GPLv2+,libs,r7,None,http://sourceforge.net/projects/mad/,http://sourceforge.net/tracker/?group_id=12349&atid=112349,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib gperf-native,Library for interacting with ID3 tags.,N/A,ftp://ftp.mars.org/pub/mpeg/libid3tag-0.15.1b.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['libxml-sax-perl', '0.99', '0.99', 'Artistic-1.0 | GPL-1.0+', 'libs', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml-namespacesupport-perl-native perl perl-native', 'None', 'None', 'XML::SAX consists of several framework classes for using and building Perl SAX2 XML parsers, filters, and drivers. It is designed around the need to be able to "plug in" different SAX parsers to an application without requiring programmer intervention. Those of you familiar with the DBI will be right at home. Some of the designs come from the Java JAXP specification (SAX part), only without the javaness.', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (libxml-sax-perl,0.99,0.99,Artistic-1.0 | GPL-1.0+,libs,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml-namespacesupport-perl-native perl perl-native,XML::SAX consists of several framework classes for using and building Perl SAX2 XML parsers, filters, and drivers. It is designed around the need to be able to "plug in" different SAX parsers to an application without requiring programmer intervention. Those of you familiar with the DBI will be right at home. Some of the designs come from the Java JAXP specification (SAX part), only without the javaness.,N/A,http://search.cpan.org/CPAN/authors/id/G/GR/GRANTM/XML-SAX-0.99.tar.gz,Kai Kang <kai.kang@windriver.com>)
['gstreamer1.0-libav', '1.0.7', '1.1.2', 'GPLv2+ & LGPLv2+ & ( (GPLv2+ & LGPLv2.1+) | (GPLv3+ & LGPLv3+) )', 'multimedia', 'http://www.gstreamer.net/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base zlib bzip2', 'None', 'None', 'Libav-based GStreamer 1.x plugin', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0-libav,1.0.7,1.1.2,GPLv2+ & LGPLv2+ & ( (GPLv2+ & LGPLv2.1+) | (GPLv3+ & LGPLv3+) ),multimedia,r1,None,http://www.gstreamer.net/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base zlib bzip2,Libav-based GStreamer 1.x plugin,N/A,http://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['parted', '3.1', '3.1', 'GPLv3+', 'console/tools', 'http://www.gnu.org/software/parted/parted.html', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses readline util-linux', 'None', 'None', 'parted, the GNU partition resizing program', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/parted/parted-3.1.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (parted,3.1,3.1,GPLv3+,console/tools,r1,None,http://www.gnu.org/software/parted/parted.html,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses readline util-linux,parted, the GNU partition resizing program,N/A,ftp://ftp.gnu.org/gnu/parted/parted-3.1.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['quilt', '0.60', '0.60', 'GPLv2', 'devel', 'http://savannah.nongnu.org/projects/quilt/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Tool to work with series of patches.', 'MATCH', 'N/A', 'http://download.savannah.gnu.org/releases/quilt/quilt-0.60.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (quilt,0.60,0.60,GPLv2,devel,r1,None,http://savannah.nongnu.org/projects/quilt/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Tool to work with series of patches.,N/A,http://download.savannah.gnu.org/releases/quilt/quilt-0.60.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['xcb-util-image', '0.3.9', '0.3.9', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org/XcbUtil/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native xcb-util', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/xcb-util-image-0.3.9.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcb-util-image,0.3.9,0.3.9,MIT,x11/libs,r0,None,http://xcb.freedesktop.org/XcbUtil/,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native xcb-util,The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.,N/A,http://xcb.freedesktop.org/dist/xcb-util-image-0.3.9.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['chkconfig-alternatives-native', '1.3.59+AUTOINC+cd437ecbd8', '1.3.59+AUTOINC+cd437ecbd8', 'GPLv2', 'base', 'http://fedorahosted.org/releases/c/h/chkconfig', 'r7', 'gettext-minimal-native ', 'None', 'None', '${DESCRIPTION_chkconfig-alternatives}', 'ErrUnknown:github.com/kergoth/chkconfig', 'N/A', 'git://github.com/kergoth/chkconfig;branch=sysroot', 'Wenzong Fan <wenzong.fan@windriver.com>', 'None']
inserted (chkconfig-alternatives-native,1.3.59+AUTOINC+cd437ecbd8,1.3.59+AUTOINC+cd437ecbd8,GPLv2,base,r7,None,http://fedorahosted.org/releases/c/h/chkconfig,None,ErrUnknown:github.com/kergoth/chkconfig,gettext-minimal-native ,${DESCRIPTION_chkconfig-alternatives},N/A,git://github.com/kergoth/chkconfig;branch=sysroot,Wenzong Fan <wenzong.fan@windriver.com>)
['util-macros', '1.17', '1.17', 'MIT & MIT-style', 'x11/utils', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'M4 autotools macros used by various X.org programs.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/util/util-macros-1.17.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (util-macros,1.17,1.17,MIT & MIT-style,x11/utils,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,M4 autotools macros used by various X.org programs.,N/A,http://xorg.freedesktop.org/releases/individual/util/util-macros-1.17.tar.gz,Saul Wold <sgw@linux.intel.com>)
['libxslt', '1.1.28', '1.1.28', 'MIT', 'libs', 'http://xmlsoft.org/XSLT/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml2', 'https://bugzilla.gnome.org/', 'None', 'GNOME XSLT library', 'MATCH', 'N/A', 'ftp://xmlsoft.org/libxslt//libxslt-1.1.28.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxslt,1.1.28,1.1.28,MIT,libs,r0,None,http://xmlsoft.org/XSLT/,https://bugzilla.gnome.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml2,GNOME XSLT library,N/A,ftp://xmlsoft.org/libxslt//libxslt-1.1.28.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['python-pycairo', '1.10.0', '1.10.0', 'LGPLv2.1 & MPL-1.1', 'python-devel', 'http://cairographics.org/pycairo', 'r2', 'pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cairo python-native python python-native ', 'http://bugs.freedesktop.org', 'None', 'Python Bindings for the Cairo canvas library', 'MATCH', 'N/A', 'http://cairographics.org/releases/py2cairo-1.10.0.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-pycairo,1.10.0,1.10.0,LGPLv2.1 & MPL-1.1,python-devel,r2,None,http://cairographics.org/pycairo,http://bugs.freedesktop.org,MATCH,pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cairo python-native python python-native ,Python Bindings for the Cairo canvas library,N/A,http://cairographics.org/releases/py2cairo-1.10.0.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['mktemp', '1.7', '1.7', 'ISC', 'console/utils', 'http://www.mktemp.org/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'http://www.mktemp.org/bugs', 'None', 'Allow safe temporary file creation from shell scripts.', 'MATCH', 'N/A', 'ftp://ftp.mktemp.org/pub/mktemp/mktemp-1.7.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (mktemp,1.7,1.7,ISC,console/utils,r3,None,http://www.mktemp.org/,http://www.mktemp.org/bugs,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,Allow safe temporary file creation from shell scripts.,N/A,ftp://ftp.mktemp.org/pub/mktemp/mktemp-1.7.tar.gz,Saul Wold <sgw@linux.intel.com>)
['xf86-video-vmware', '13.0.1', '13.0.1', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11 libxvmc drm glproto virtual/libgl xineramaproto libpciaccess', 'https://bugs.freedesktop.org', '2', 'vmware is an Xorg driver for VMware virtual video cards.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-video-vmware-13.0.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-video-vmware,13.0.1,13.0.1,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11 libxvmc drm glproto virtual/libgl xineramaproto libpciaccess,vmware is an Xorg driver for VMware virtual video cards.,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-video-vmware-13.0.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libunistring', '0.9.3', '0.9.3', 'GPLv3&LGPLv3', 'devel', 'http://www.gnu.org/software/libunistring/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', "Text files are nowadays usually encoded in Unicode, and may consist of very different scripts from Latin letters to Chinese Hanzi with many kinds of special characters accents, right-to-left writing marks, hyphens, Roman numbers, and much more. But the POSIX platform APIs for text do not contain adequate functions for dealing with particular properties of many Unicode characters. In fact, the POSIX APIs for text have several assumptions at their base which don't hold for Unicode text. This library provides functions for manipulating Unicode strings and for manipulating C strings according to the Unicode standard. This package contains documentation.", 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (libunistring,0.9.3,0.9.3,GPLv3&LGPLv3,devel,r3,None,http://www.gnu.org/software/libunistring/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Text files are nowadays usually encoded in Unicode, and may consist of very different scripts from Latin letters to Chinese Hanzi with many kinds of special characters accents, right-to-left writing marks, hyphens, Roman numbers, and much more. But the POSIX platform APIs for text do not contain adequate functions for dealing with particular properties of many Unicode characters. In fact, the POSIX APIs for text have several assumptions at their base which don't hold for Unicode text. This library provides functions for manipulating Unicode strings and for manipulating C strings according to the Unicode standard. This package contains documentation.,N/A,ftp://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['elfutils', '0.148', '1.7.4', '(GPL-2+ & Elfutils-Exception)', 'base', 'https://fedorahosted.org/elfutils', 'r11', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool bzip2 zlib virtual/libintl', 'None', 'None', 'A collection of utilities and DSOs to handle compiled objects.', 'UPDATE', 'N/A', 'https://fedorahosted.org/releases/e/l/elfutils/elfutils-0.148.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (elfutils,0.148,1.7.4,(GPL-2+ & Elfutils-Exception),base,r11,None,https://fedorahosted.org/elfutils,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool bzip2 zlib virtual/libintl,A collection of utilities and DSOs to handle compiled objects.,N/A,https://fedorahosted.org/releases/e/l/elfutils/elfutils-0.148.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['libproxy', '0.4.7', '0.4.7', 'LGPLv2.1+', 'libs', 'http://code.google.com/p/libproxy/', 'r6', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native cmake-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf glib-2.0', 'http://code.google.com/p/libproxy/issues/list', 'None', 'A library that provides automatic proxy configuration management', 'MATCH', 'N/A', 'http://libproxy.googlecode.com/files/libproxy-0.4.7.zip', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libproxy,0.4.7,0.4.7,LGPLv2.1+,libs,r6,None,http://code.google.com/p/libproxy/,http://code.google.com/p/libproxy/issues/list,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native cmake-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf glib-2.0,A library that provides automatic proxy configuration management,N/A,http://libproxy.googlecode.com/files/libproxy-0.4.7.zip,Cristian Iorga <cristian.iorga@intel.com>)
['xf86-video-intel', '2.21.9', '2.21.12', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11 drm xf86driproto glproto virtual/libgl xineramaproto xf86driproto libpciaccess udev', 'https://bugs.freedesktop.org', '2', 'intel is an Xorg driver for Intel integrated graphics chipsets. The driver supports depths 8, 15, 16 and 24. On some chipsets, the driver supports hardware accelerated 3D via the Direct Rendering Infrastructure (DRI).', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-video-intel-2.21.9.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-video-intel,2.21.9,2.21.12,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11 drm xf86driproto glproto virtual/libgl xineramaproto xf86driproto libpciaccess udev,intel is an Xorg driver for Intel integrated graphics chipsets. The driver supports depths 8, 15, 16 and 24. On some chipsets, the driver supports hardware accelerated 3D via the Direct Rendering Infrastructure (DRI).,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-video-intel-2.21.9.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libgpg-error', '1.12', '1.12', 'GPLv2+ & LGPLv2.1+', 'libs', 'http://www.gnupg.org/related_software/libgpg-error/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'https://bugs.g10code.com/gnupg/index', 'None', 'a small library that defines common error values for all GnuPG components', 'MATCH', 'N/A', 'ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libgpg-error,1.12,1.12,GPLv2+ & LGPLv2.1+,libs,r0,None,http://www.gnupg.org/related_software/libgpg-error/,https://bugs.g10code.com/gnupg/index,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,a small library that defines common error values for all GnuPG components,N/A,ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['gettext-minimal-native', '0.18.2', 'INVALID', 'FSF-Unlimited', 'base', 'unknown', 'r0', ' ', 'None', 'None', 'Contains the m4 macros sufficient to support building autoconf/automake. This provides a significant build time speedup by the removal of gettext-native from most dependency chains (now only needed for gettext for the target).', 'MATCH', 'N/A', 'file://aclocal.tgz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (gettext-minimal-native,0.18.2,INVALID,FSF-Unlimited,base,r0,None,unknown,None,MATCH, ,Contains the m4 macros sufficient to support building autoconf/automake. This provides a significant build time speedup by the removal of gettext-native from most dependency chains (now only needed for gettext for the target).,N/A,file://aclocal.tgz,Saul Wold <sgw@linux.intel.com>)
['quicky', '0.4', '0.4', 'GPLv2+', 'x11/apps', 'http://qt-apps.org/content/show.php/Quicky?content=80325', 'r2', 'qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A simple note-taking application with Wiki-style syntax and behaviour', 'MATCH', 'N/A', 'http://qt-apps.org/CONTENT/content-files/80325-quicky-0.4.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (quicky,0.4,0.4,GPLv2+,x11/apps,r2,None,http://qt-apps.org/content/show.php/Quicky?content=80325,None,MATCH,qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A simple note-taking application with Wiki-style syntax and behaviour,N/A,http://qt-apps.org/CONTENT/content-files/80325-quicky-0.4.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['rxvt-unicode', '9.18', '9.18', 'GPLv2+', 'x11/utils', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 libxt libxft gdk-pixbuf virtual/update-alternatives', 'None', 'None', 'rxvt-unicode is a clone of the well known terminal emulator rxvt, modified to store text in Unicode (either UCS-2 or UCS-4) and to use locale-correct input and output. It also supports mixing multiple fonts at the same time, including Xft fonts.', 'MATCH', 'N/A', 'http://dist.schmorp.de/rxvt-unicode/Attic/rxvt-unicode-9.18.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (rxvt-unicode,9.18,9.18,GPLv2+,x11/utils,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 libxt libxft gdk-pixbuf virtual/update-alternatives,rxvt-unicode is a clone of the well known terminal emulator rxvt, modified to store text in Unicode (either UCS-2 or UCS-4) and to use locale-correct input and output. It also supports mixing multiple fonts at the same time, including Xft fonts.,N/A,http://dist.schmorp.de/rxvt-unicode/Attic/rxvt-unicode-9.18.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['valgrind', '3.8.1', '3.8.1', 'GPLv2 & GPLv2+ & BSD', 'base', 'http://valgrind.org/', 'r8', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11', 'http://valgrind.org/support/bug_reports.html', 'None', 'Valgrind memory debugger', 'MATCH', 'N/A', 'http://www.valgrind.org/downloads/valgrind-3.8.1.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (valgrind,3.8.1,3.8.1,GPLv2 & GPLv2+ & BSD,base,r8,None,http://valgrind.org/,http://valgrind.org/support/bug_reports.html,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11,Valgrind memory debugger,N/A,http://www.valgrind.org/downloads/valgrind-3.8.1.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['libowl-av', '0.1+gitAUTOINC+03030c41ea', '0.1+gitAUTOINC+03030c4', 'LGPLv2+', 'x11', 'http://www.o-hand.com', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gstreamer gst-plugins-base', 'http://bugzilla.openedhand.com/', 'None', 'OpenedHand Widget Library Audio/Video', 'MATCH', 'N/A', 'git://git.yoctoproject.org/libowl-av;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libowl-av,0.1+gitAUTOINC+03030c41ea,0.1+gitAUTOINC+03030c4,LGPLv2+,x11,r3,None,http://www.o-hand.com,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gstreamer gst-plugins-base,OpenedHand Widget Library Audio/Video,N/A,git://git.yoctoproject.org/libowl-av;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['init-ifupdown', '1.0', 'INVALID', 'GPLv2', 'base', 'http://packages.debian.org/ifupdown', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native', 'None', 'None', 'This package provides high level tools to configure network interfaces', 'MATCH', 'N/A', 'file://copyright', 'None', 'None']
inserted (init-ifupdown,1.0,INVALID,GPLv2,base,r3,None,http://packages.debian.org/ifupdown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native,This package provides high level tools to configure network interfaces,N/A,file://copyright,None)
['tslib', '1.0', '1.0', 'LGPLv2', 'base', 'http://tslib.berlios.de/', 'r21', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Tslib is an abstraction layer for touchscreen panel events, as well as a filter stack for the manipulation of those events. Tslib is generally used on embedded devices to provide a common user space interface to touchscreen functionality.', 'MATCH', 'N/A', 'http://download.berlios.de/tslib/tslib-1.0.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (tslib,1.0,1.0,LGPLv2,base,r21,None,http://tslib.berlios.de/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Tslib is an abstraction layer for touchscreen panel events, as well as a filter stack for the manipulation of those events. Tslib is generally used on embedded devices to provide a common user space interface to touchscreen functionality.,N/A,http://download.berlios.de/tslib/tslib-1.0.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['libxext', '1.3.2', '1.3.2', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto virtual/libx11 xextproto libxau libxdmcp', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libXext provides an X Window System client interface to several extensions to the X protocol. The supported protocol extensions are DOUBLE-BUFFER, DPMS, Extended-Visual-Information, LBX, MIT_SHM, MIT_SUNDRY-NONSTANDARD, Multi-Buffering, SECURITY, SHAPE, SYNC, TOG-CUP, XC-APPGROUP, XC-MISC, XTEST. libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXext-1.3.2.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxext,1.3.2,1.3.2,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto virtual/libx11 xextproto libxau libxdmcp,libXext provides an X Window System client interface to several extensions to the X protocol. The supported protocol extensions are DOUBLE-BUFFER, DPMS, Extended-Visual-Information, LBX, MIT_SHM, MIT_SUNDRY-NONSTANDARD, Multi-Buffering, SECURITY, SHAPE, SYNC, TOG-CUP, XC-APPGROUP, XC-MISC, XTEST. libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXext-1.3.2.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['boost', '1.54.0', '1.54.0', 'BSL-1.0 & MIT & Python-2.0', 'libs', 'http://www.boost.org/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bjam-native zlib bzip2', 'None', 'None', 'Free peer-reviewed portable C++ source libraries', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/boost/boost_1_54_0.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (boost,1.54.0,1.54.0,BSL-1.0 & MIT & Python-2.0,libs,r0,None,http://www.boost.org/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bjam-native zlib bzip2,Free peer-reviewed portable C++ source libraries,N/A,http://downloads.sourceforge.net/boost/boost_1_54_0.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['python-imaging', '1.1.7', '1.1.7', 'MIT', 'devel/python', 'unknown', 'r5', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc freetype jpeg tiff python-native python python-native ', 'None', 'None', 'Python Imaging Library', 'MATCH', 'N/A', 'http://effbot.org/downloads/Imaging-1.1.7.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-imaging,1.1.7,1.1.7,MIT,devel/python,r5,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc freetype jpeg tiff python-native python python-native ,Python Imaging Library,N/A,http://effbot.org/downloads/Imaging-1.1.7.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libpod-plainer-perl', '1.03', '1.03', 'Artistic-1.0 | GPL-1.0+', 'libs', 'http://search.cpan.org/dist/Pod-Plainer/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', "Pod::Plainer uses Pod::Parser which takes Pod with the (new) 'C<< .. >>' constructs and returns the old(er) style with just 'C<>'; '<' and '>' are replaced by 'E<lt>' and 'E<gt>'. This can be used to pre-process Pod before using tools which do not recognise the new style Pods.", 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/R/RM/RMBARKER/Pod-Plainer-1.03.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libpod-plainer-perl,1.03,1.03,Artistic-1.0 | GPL-1.0+,libs,r0,None,http://search.cpan.org/dist/Pod-Plainer/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,Pod::Plainer uses Pod::Parser which takes Pod with the (new) 'C<< .. >>' constructs and returns the old(er) style with just 'C<>'; '<' and '>' are replaced by 'E<lt>' and 'E<gt>'. This can be used to pre-process Pod before using tools which do not recognise the new style Pods.,N/A,http://search.cpan.org/CPAN/authors/id/R/RM/RMBARKER/Pod-Plainer-1.03.tar.gz,Saul Wold <sgw@linux.intel.com>)
['unifdef-native', '2.6.18+git', 'INVALID', 'BSD-2-Clause', 'devel', 'unknown', 'r1', ' ', 'None', 'None', 'Kernel header preprocessor', 'MATCH', '2.6.18+git', 'file://unifdef.c', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (unifdef-native,2.6.18+git,INVALID,BSD-2-Clause,devel,r1,None,unknown,None,MATCH, ,Kernel header preprocessor,2.6.18+git,file://unifdef.c,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['binutils-crosssdk', '2.23.2', '2.23.2', 'GPLv3', 'devel', 'http://www.gnu.org/software/binutils/', 'r4', ' flex-native bison-native zlib-native', 'http://sourceware.org/bugzilla/', 'None', 'The GNU Binutils are a collection of binary tools. The main ones are ld (GNU Linker), and as (GNU Assembler). This package also includes addition tools such as addr2line (Converts addresses into filenames and line numbers), ar (utility for creating, modifying and extracting archives), nm (list symbols in object files), objcopy (copy and translate object files), objdump (Display object information), and other tools and related libraries.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/binutils/binutils-2.23.2.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (binutils-crosssdk,2.23.2,2.23.2,GPLv3,devel,r4,None,http://www.gnu.org/software/binutils/,http://sourceware.org/bugzilla/,MATCH, flex-native bison-native zlib-native,The GNU Binutils are a collection of binary tools. The main ones are ld (GNU Linker), and as (GNU Assembler). This package also includes addition tools such as addr2line (Converts addresses into filenames and line numbers), ar (utility for creating, modifying and extracting archives), nm (list symbols in object files), objcopy (copy and translate object files), objdump (Display object information), and other tools and related libraries.,N/A,ftp://ftp.gnu.org/gnu/binutils/binutils-2.23.2.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['gawk', '4.0.2', '4.1.0', 'GPLv3', 'console/utils', 'www.gnu.org/software/gawk', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc readline virtual/update-alternatives', 'bug-gawk@gnu.org', 'None', 'A program that you can use to select particular records in a file and perform operations upon them.', 'UPDATE', 'N/A', 'ftp://ftp.gnu.org/gnu/gawk/gawk-4.0.2.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (gawk,4.0.2,4.1.0,GPLv3,console/utils,r0,None,www.gnu.org/software/gawk,bug-gawk@gnu.org,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc readline virtual/update-alternatives,A program that you can use to select particular records in a file and perform operations upon them.,N/A,ftp://ftp.gnu.org/gnu/gawk/gawk-4.0.2.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['oh-puzzles', '0.2+gitAUTOINC+92f1a20e4b', '0.2+gitAUTOINC+92f1a20', 'MIT', 'x11', 'http://o-hand.com/', 'r10', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gconf intltool-native librsvg libowl', 'http://bugzilla.openedhand.com/', 'None', 'Portable Puzzle Collection', 'MATCH', 'N/A', 'git://git.yoctoproject.org/oh-puzzles;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (oh-puzzles,0.2+gitAUTOINC+92f1a20e4b,0.2+gitAUTOINC+92f1a20,MIT,x11,r10,None,http://o-hand.com/,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gconf intltool-native librsvg libowl,Portable Puzzle Collection,N/A,git://git.yoctoproject.org/oh-puzzles;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['xinetd', '2.3.15', '2.3.15', 'BSD', 'base', 'http://www.xinetd.org', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native tcp-wrappers', 'None', 'None', 'Highly configurable, modular and secure inetd', 'MATCH', 'N/A', 'http://www.xinetd.org/xinetd-2.3.15.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xinetd,2.3.15,2.3.15,BSD,base,r2,None,http://www.xinetd.org,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native tcp-wrappers,Highly configurable, modular and secure inetd,N/A,http://www.xinetd.org/xinetd-2.3.15.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['connman-gnome', '0.7', '0.7', 'GPLv2 & LGPLv2.1', 'libs/network', 'http://connman.net/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ dbus-glib intltool-native hicolor-icon-theme gtk-update-icon-cache-native', 'None', 'None', 'gtk frontend for connman', 'ErrUnknown:github.com/connectivity/connman-gnome.git', 'N/A', 'git://github.com/connectivity/connman-gnome.git;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (connman-gnome,0.7,0.7,GPLv2 & LGPLv2.1,libs/network,r0,None,http://connman.net/,None,ErrUnknown:github.com/connectivity/connman-gnome.git,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ dbus-glib intltool-native hicolor-icon-theme gtk-update-icon-cache-native,gtk frontend for connman,N/A,git://github.com/connectivity/connman-gnome.git;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['tremor', '20120314', '18906', 'BSD', 'libs', 'unknown', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg', 'None', 'None', 'tremor is a fixed point implementation of the vorbis codec.', 'UPDATE', '20120122', 'svn://svn.xiph.org/trunk;module=Tremor;rev=18221;protocol=http', 'Cristian Iorga <cristian.iorga@intel.com>', 'Same revision on different SVN modules']
inserted (tremor,20120314,18906,BSD,libs,r1,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg,tremor is a fixed point implementation of the vorbis codec.,20120122,svn://svn.xiph.org/trunk;module=Tremor;rev=18221;protocol=http,Cristian Iorga <cristian.iorga@intel.com>)
['clutter-1.0', '1.14.4', '1.15.2', 'LGPLv2.1+', 'base', 'http://www.clutter-project.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pango glib-2.0 json-glib atk udev cogl-1.0 gtk-doc-stub-native virtual/libx11 libxi libxfixes virtual/libgl wayland libxkbcommon gdk-pixbuf virtual/libx11 libxi libxfixes', 'None', 'None', 'Clutter graphics library', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/clutter/1.14/clutter-1.14.4.tar.xz;name=archive', 'None', 'None']
inserted (clutter-1.0,1.14.4,1.15.2,LGPLv2.1+,base,r0,None,http://www.clutter-project.org/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pango glib-2.0 json-glib atk udev cogl-1.0 gtk-doc-stub-native virtual/libx11 libxi libxfixes virtual/libgl wayland libxkbcommon gdk-pixbuf virtual/libx11 libxi libxfixes,Clutter graphics library,N/A,http://ftp.gnome.org/pub/GNOME/sources/clutter/1.14/clutter-1.14.4.tar.xz;name=archive,None)
['shadow-securetty', '4.1.4.3', 'INVALID', 'MIT', 'base utils', 'unknown', 'r2', ' ', 'None', 'None', 'Provider of the machine specific securetty file', 'MATCH', 'N/A', 'file://securetty', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (shadow-securetty,4.1.4.3,INVALID,MIT,base utils,r2,None,unknown,None,MATCH, ,Provider of the machine specific securetty file,N/A,file://securetty,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['run-postinsts', '1.0', 'INVALID', 'MIT', 'devel', 'unknown', 'r9', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native', 'None', 'None', 'Run postinstall scripts on device', 'MATCH', 'check', 'file://run-postinsts', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (run-postinsts,1.0,INVALID,MIT,devel,r9,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native,Run postinstall scripts on device,check,file://run-postinsts,Cristian Iorga <cristian.iorga@intel.com>)
['python-gst', '0.10.22', '0.10.22', 'LGPLv2.1', 'devel/python', 'unknown', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base python-pygobject python-native python python-native ', 'None', 'None', 'Python Gstreamer bindings', 'MATCH', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-python/gst-python-0.10.22.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-gst,0.10.22,0.10.22,LGPLv2.1,devel/python,r2,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base python-pygobject python-native python python-native ,Python Gstreamer bindings,N/A,http://gstreamer.freedesktop.org/src/gst-python/gst-python-0.10.22.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['xserver-xf86-config', '0.1', 'INVALID', 'MIT-X', 'x11/base', 'http://www.x.org', 'r12', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'X.Org X server configuration file', 'MATCH', 'N/A', 'file://xorg.conf', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xserver-xf86-config,0.1,INVALID,MIT-X,x11/base,r12,None,http://www.x.org,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,X.Org X server configuration file,N/A,file://xorg.conf,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gccmakedep', '1.0.2', '1.0.2', 'MIT-X', 'x11/utils', 'http://www.x.org', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', "create dependencies in makefiles using 'gcc -M'", 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/util/gccmakedep-1.0.2.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gccmakedep,1.0.2,1.0.2,MIT-X,x11/utils,r3,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,create dependencies in makefiles using 'gcc -M',N/A,http://xorg.freedesktop.org/releases/individual/util/gccmakedep-1.0.2.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['lsbinitscripts', '9.48', '9.48', 'GPLv2', 'base', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc popt glib-2.0 virtual/update-alternatives', 'None', 'None', 'SysV init scripts which only is used in an LSB image', 'MATCH', 'N/A', 'http://pkgs.fedoraproject.org/repo/pkgs/initscripts/initscripts-9.48.tar.bz2/7dfab81a5a8d3f0dea5ba55e391c26f3/initscripts-9.48.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (lsbinitscripts,9.48,9.48,GPLv2,base,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc popt glib-2.0 virtual/update-alternatives,SysV init scripts which only is used in an LSB image,N/A,http://pkgs.fedoraproject.org/repo/pkgs/initscripts/initscripts-9.48.tar.bz2/7dfab81a5a8d3f0dea5ba55e391c26f3/initscripts-9.48.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['xextproto', '7.2.1', '7.2.1', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for several X extensions. These protocol extensions include DOUBLE-BUFFER, DPMS, Extended-Visual-Information, LBX, MIT_SHM, MIT_SUNDRY-NONSTANDARD, Multi-Buffering, SECURITY, SHAPE, SYNC, TOG-CUP, XC-APPGROUP, XC-MISC, XTEST. In addition a small set of utility functions are also available.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/xextproto-7.2.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xextproto,7.2.1,7.2.1,MIT & MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for several X extensions. These protocol extensions include DOUBLE-BUFFER, DPMS, Extended-Visual-Information, LBX, MIT_SHM, MIT_SUNDRY-NONSTANDARD, Multi-Buffering, SECURITY, SHAPE, SYNC, TOG-CUP, XC-APPGROUP, XC-MISC, XTEST. In addition a small set of utility functions are also available.,N/A,http://xorg.freedesktop.org/releases/individual/proto/xextproto-7.2.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gnu-config', '20120814', '20120814', 'GPLv2', 'devel', 'unknown', 'r0', ' ', 'None', 'None', 'Tool that installs the GNU config.guess / config.sub into a directory tree', 'MATCH', 'N/A', 'http://downloads.yoctoproject.org/releases/gnu-config/gnu-config-20120814.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gnu-config,20120814,20120814,GPLv2,devel,r0,None,unknown,None,MATCH, ,Tool that installs the GNU config.guess / config.sub into a directory tree,N/A,http://downloads.yoctoproject.org/releases/gnu-config/gnu-config-20120814.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['python-git', '0.3.2.RC1', '0.3.2.RC1', 'BSD-3-Clause', 'devel/python', 'http://github.com/gitpython-developers/GitPython', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-gitdb python-native python python-native python-setuptools-native', 'None', 'None', 'GitPython provides object model read and write access to a git repository. Access repository information conveniently, alter the index directly, handle remotes, or go down to low-level object database access with big-files support.', 'MATCH', 'N/A', 'http://pypi.python.org/packages/source/G/GitPython/GitPython-0.3.2.RC1.tar.gz', 'None', 'None']
inserted (python-git,0.3.2.RC1,0.3.2.RC1,BSD-3-Clause,devel/python,r0,None,http://github.com/gitpython-developers/GitPython,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-gitdb python-native python python-native python-setuptools-native,GitPython provides object model read and write access to a git repository. Access repository information conveniently, alter the index directly, handle remotes, or go down to low-level object database access with big-files support.,N/A,http://pypi.python.org/packages/source/G/GitPython/GitPython-0.3.2.RC1.tar.gz,None)
['eglibc-initial', '2.18', '2.18', 'GPLv2 & LGPLv2.1', 'libs', 'http://www.eglibc.org/home', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native linux-libc-headers virtual/i586-poky-linux-gcc-initial kconfig-frontends-native', 'None', 'None', "Embedded GLIBC (EGLIBC) is a variant of the GNU C Library (GLIBC) that is designed to work well on embedded systems. EGLIBC strives to be source and binary compatible with GLIBC. EGLIBC's goals include reduced footprint, configurable components, better support for cross-compilation and cross-testing.", 'MATCH', 'N/A', 'http://sakrah.dontexist.org/files/eglibc-2.18-svnr23532.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (eglibc-initial,2.18,2.18,GPLv2 & LGPLv2.1,libs,r0,None,http://www.eglibc.org/home,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native linux-libc-headers virtual/i586-poky-linux-gcc-initial kconfig-frontends-native,Embedded GLIBC (EGLIBC) is a variant of the GNU C Library (GLIBC) that is designed to work well on embedded systems. EGLIBC strives to be source and binary compatible with GLIBC. EGLIBC's goals include reduced footprint, configurable components, better support for cross-compilation and cross-testing.,N/A,http://sakrah.dontexist.org/files/eglibc-2.18-svnr23532.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['alsa-utils', '1.0.26', '1.0.27.2', 'GPLv2+', 'console/utils', 'http://www.alsa-project.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc alsa-lib ncurses libsamplerate0 udev', 'https://bugtrack.alsa-project.org/alsa-bug/login_page.php', 'None', 'ALSA Utilities', 'UPDATE', 'N/A', 'ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.26.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (alsa-utils,1.0.26,1.0.27.2,GPLv2+,console/utils,r0,None,http://www.alsa-project.org,https://bugtrack.alsa-project.org/alsa-bug/login_page.php,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc alsa-lib ncurses libsamplerate0 udev,ALSA Utilities,N/A,ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.26.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['apr', '1.4.8', '1.4.8', 'Apache-2.0', 'libs', 'http://apr.apache.org/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-linux', 'None', 'None', 'Apache Portable Runtime (APR) library', 'MATCH', 'N/A', 'http://www.apache.org/dist/apr/apr-1.4.8.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (apr,1.4.8,1.4.8,Apache-2.0,libs,r0,None,http://apr.apache.org/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-linux,Apache Portable Runtime (APR) library,N/A,http://www.apache.org/dist/apr/apr-1.4.8.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['libusb1', '1.0.9', '1.0.9', 'LGPLv2.1+', 'libs', 'http://libusb.sf.net', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://www.libusb.org/report', 'None', 'Userspace library to access USB (version 1.0)', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/libusb/libusb-1.0.9.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libusb1,1.0.9,1.0.9,LGPLv2.1+,libs,r1,None,http://libusb.sf.net,http://www.libusb.org/report,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Userspace library to access USB (version 1.0),N/A,http://downloads.sourceforge.net/libusb/libusb-1.0.9.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['apt', '0.9.8.2', '0.9.9.2', 'GPLv2.0+', 'base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc curl db', 'None', 'None', 'Advanced front-end for dpkg.', 'UPDATE', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/a/apt/apt_0.9.8.2.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (apt,0.9.8.2,0.9.9.2,GPLv2.0+,base,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc curl db,Advanced front-end for dpkg.,N/A,ftp://ftp.debian.org/debian/pool/main/a/apt/apt_0.9.8.2.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['libxcb', '1.9.1', '1.9.1', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc xcb-proto xproto libxau libxslt-native xcb-proto-native libpthread-stubs python-native libxdmcp', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'The X protocol C-language Binding (XCB) is a replacement for Xlib featuring a small footprint, latency hiding, direct access to the protocol, improved threading support, and extensibility.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/libxcb-1.9.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxcb,1.9.1,1.9.1,MIT,x11/libs,r0,None,http://xcb.freedesktop.org,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc xcb-proto xproto libxau libxslt-native xcb-proto-native libpthread-stubs python-native libxdmcp,The X protocol C-language Binding (XCB) is a replacement for Xlib featuring a small footprint, latency hiding, direct access to the protocol, improved threading support, and extensibility.,N/A,http://xcb.freedesktop.org/dist/libxcb-1.9.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libclass-isa-perl', '0.36', '0.36', 'Artistic-1.0 | GPL-1.0+', 'libs', 'http://search.cpan.org/dist/Class-ISA/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', 'Suppose you have a class (like Food::Fish::Fishstick) that is derived, via its @ISA, from one or more superclasses (as Food::Fish::Fishstick is from Food::Fish,Life::Fungus, and Chemicals), and some of those superclasses may themselves each bederived, via its @ISA, from one or more superclasses (as above).When, then, you call a method in that class ($fishstick->calories), Perl first searchesthere for that method, but if it\'s not there, it goes searching in its superclasses, andso on, in a depth-first (or maybe "height-first" is the word) search. In the above example,it\'d first look in Food::Fish, then Food, then Matter, then Life::Fungus, then Life, thenChemicals.This library, Class::ISA, provides functions that return that list -- the list(in order) of names of classes Perl would search to find a method, with no duplicates.', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/S/SM/SMUELLER/Class-ISA-0.36.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libclass-isa-perl,0.36,0.36,Artistic-1.0 | GPL-1.0+,libs,r0,None,http://search.cpan.org/dist/Class-ISA/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,Suppose you have a class (like Food::Fish::Fishstick) that is derived, via its @ISA, from one or more superclasses (as Food::Fish::Fishstick is from Food::Fish,Life::Fungus, and Chemicals), and some of those superclasses may themselves each bederived, via its @ISA, from one or more superclasses (as above).When, then, you call a method in that class ($fishstick->calories), Perl first searchesthere for that method, but if it's not there, it goes searching in its superclasses, andso on, in a depth-first (or maybe "height-first" is the word) search. In the above example,it'd first look in Food::Fish, then Food, then Matter, then Life::Fungus, then Life, thenChemicals.This library, Class::ISA, provides functions that return that list -- the list(in order) of names of classes Perl would search to find a method, with no duplicates.,N/A,http://search.cpan.org/CPAN/authors/id/S/SM/SMUELLER/Class-ISA-0.36.tar.gz,Saul Wold <sgw@linux.intel.com>)
['tar', '1.26', '1.26', 'GPLv3', 'base', 'http://www.gnu.org/software/tar/', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'GNU tar saves many files together into a single tape or disk archive, and can restore individual files from the archive.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/tar/tar-1.26.tar.bz2', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (tar,1.26,1.26,GPLv3,base,r5,None,http://www.gnu.org/software/tar/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,GNU tar saves many files together into a single tape or disk archive, and can restore individual files from the archive.,N/A,ftp://ftp.gnu.org/gnu/tar/tar-1.26.tar.bz2,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['zip', '3.0', '30', 'BSD-3-Clause', 'console/utils', 'http://www.info-zip.org', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Archiver for .zip files', 'UPDATE', '3.0', 'ftp://ftp.info-zip.org/pub/infozip/src/zip30.tgz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (zip,3.0,30,BSD-3-Clause,console/utils,r2,None,http://www.info-zip.org,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Archiver for .zip files,3.0,ftp://ftp.info-zip.org/pub/infozip/src/zip30.tgz,Radu Moisan <radu.moisan@intel.com>)
['gst-openmax', '0.10.1', '0.10.1', 'LGPLv2.1', 'base', 'http://freedesktop.org/wiki/GstOpenMAX', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer', 'None', 'None', 'GstOpenMAX is a GStreamer plug-in that allows communication with OpenMAX Integration Layer (IL) components. OpenMAX IL is an industry standard that provides an abstraction layer for computer graphics, video, and sound routines.', 'MATCH', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-openmax/gst-openmax-0.10.1.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gst-openmax,0.10.1,0.10.1,LGPLv2.1,base,r4,None,http://freedesktop.org/wiki/GstOpenMAX,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer,GstOpenMAX is a GStreamer plug-in that allows communication with OpenMAX Integration Layer (IL) components. OpenMAX IL is an industry standard that provides an abstraction layer for computer graphics, video, and sound routines.,N/A,http://gstreamer.freedesktop.org/src/gst-openmax/gst-openmax-0.10.1.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['qt4-embedded', '4.8.5', '4.8.5', 'LGPLv2.1 | GPLv3', 'libs', 'http://qt-project.org/', 'r0', 'qt4-tools-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc directfb tslib qt4-tools-native freetype jpeg libpng zlib dbus openssl glib-2.0 gstreamer gst-plugins-base sqlite3 tiff pulseaudio', 'None', 'None', 'Qt is a versatile cross-platform application framework -- this is the embedded version.', 'MATCH', 'N/A', 'http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt4-embedded,4.8.5,4.8.5,LGPLv2.1 | GPLv3,libs,r0,None,http://qt-project.org/,None,MATCH,qt4-tools-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc directfb tslib qt4-tools-native freetype jpeg libpng zlib dbus openssl glib-2.0 gstreamer gst-plugins-base sqlite3 tiff pulseaudio,Qt is a versatile cross-platform application framework -- this is the embedded version.,N/A,http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['startup-notification', '0.12', '0.12', 'LGPLv2+', 'libs', 'http://www.freedesktop.org/wiki/software/startup-notification/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 libsm xcb-util', 'https://bugs.freedesktop.org/enter_bug.cgi?product=Specifications', 'None', 'Startup-notification contains a reference implementation of the startup notification protocol.', 'MATCH', 'N/A', 'http://www.freedesktop.org/software/startup-notification/releases/startup-notification-0.12.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (startup-notification,0.12,0.12,LGPLv2+,libs,r2,None,http://www.freedesktop.org/wiki/software/startup-notification/,https://bugs.freedesktop.org/enter_bug.cgi?product=Specifications,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 libsm xcb-util,Startup-notification contains a reference implementation of the startup notification protocol.,N/A,http://www.freedesktop.org/software/startup-notification/releases/startup-notification-0.12.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['perl', '5.14.3', '5.19.2', 'Artistic-1.0 | GPL-1.0', 'devel', 'http://www.perl.org/', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/db grep-native gdbm zlib perl-native', 'None', 'None', 'Perl is a popular scripting language.', 'UPDATE', 'N/A', 'http://www.cpan.org/src/5.0/perl-5.14.3.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (perl,5.14.3,5.19.2,Artistic-1.0 | GPL-1.0,devel,r1,None,http://www.perl.org/,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/db grep-native gdbm zlib perl-native,Perl is a popular scripting language.,N/A,http://www.cpan.org/src/5.0/perl-5.14.3.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['tzdata', '2013b', '2013d', 'PD', 'base', 'ftp://elsie.nci.nih.gov/pub/', 'r0', ' tzcode-native', 'None', 'None', 'Timezone data', 'UPDATE', 'N/A', 'ftp://ftp.iana.org/tz/releases/tzdata2013b.tar.gz;name=tzdata', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (tzdata,2013b,2013d,PD,base,r0,None,ftp://elsie.nci.nih.gov/pub/,None,UPDATE, tzcode-native,Timezone data,N/A,ftp://ftp.iana.org/tz/releases/tzdata2013b.tar.gz;name=tzdata,Radu Moisan <radu.moisan@intel.com>)
['m4', '1.4.16', '1.4.16', 'GPLv3', 'base', 'unknown', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'GNU m4 is an implementation of the traditional Unix macro processor. It is mostly SVR4 compatible although it has some extensions (for example, handling more than 9 positional parameters to macros). GNU M4 also has built-in functions for including files, running shell commands, doing arithmetic, etc.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/m4/m4-1.4.16.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (m4,1.4.16,1.4.16,GPLv3,base,r4,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,GNU m4 is an implementation of the traditional Unix macro processor. It is mostly SVR4 compatible although it has some extensions (for example, handling more than 9 positional parameters to macros). GNU M4 also has built-in functions for including files, running shell commands, doing arithmetic, etc.,N/A,ftp://ftp.gnu.org/gnu/m4/m4-1.4.16.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['resourceproto', '1.2.0', '1.2.0', 'MIT', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Resource extension. XRes provides an interface that allows X clients to see and monitor X resource usage of various clients.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/resourceproto-1.2.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (resourceproto,1.2.0,1.2.0,MIT,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Resource extension. XRes provides an interface that allows X clients to see and monitor X resource usage of various clients.,N/A,http://xorg.freedesktop.org/releases/individual/proto/resourceproto-1.2.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['qemu', '1.5.0', '1.5.1', 'GPLv2 & LGPLv2.1', 'base', 'http://qemu.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 zlib alsa-lib virtual/libx11 pixman dtc libsdl', 'None', 'None', 'open source processor emulator', 'UPDATE', 'N/A', 'http://wiki.qemu.org/download/qemu-1.5.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (qemu,1.5.0,1.5.1,GPLv2 & LGPLv2.1,base,r0,None,http://qemu.org,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 zlib alsa-lib virtual/libx11 pixman dtc libsdl,open source processor emulator,N/A,http://wiki.qemu.org/download/qemu-1.5.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libxrandr', '1.4.0', '1.4.1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 randrproto libxrender libxext', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The X Resize, Rotate and Reflect Extension, called RandR for short, brings the ability to resize, rotate and reflect the root window of a screen. It is based on the X Resize and Rotate Extension as specified in the Proceedings of the 2001 Usenix Technical Conference [RANDR].', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXrandr-1.4.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxrandr,1.4.0,1.4.1,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 randrproto libxrender libxext,The X Resize, Rotate and Reflect Extension, called RandR for short, brings the ability to resize, rotate and reflect the root window of a screen. It is based on the X Resize and Rotate Extension as specified in the Proceedings of the 2001 Usenix Technical Conference [RANDR].,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXrandr-1.4.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libsamplerate0', '0.1.8', '0.1.8', 'GPLv2+', 'libs', 'unknown', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flac libsndfile1', 'None', 'None', 'An audio Sample Rate Conversion library', 'MATCH', 'N/A', 'http://www.mega-nerd.com/SRC/libsamplerate-0.1.8.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libsamplerate0,0.1.8,0.1.8,GPLv2+,libs,r1,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flac libsndfile1,An audio Sample Rate Conversion library,N/A,http://www.mega-nerd.com/SRC/libsamplerate-0.1.8.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['cogl-1.0', '1.14.0', '1.15.2', 'LGPLv2.1+', 'base', 'http://wiki.clutter-project.org/wiki/Cogl', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gdk-pixbuf gtk-doc-stub-native virtual/libgl libdrm pango virtual/libgl libdrm virtual/libx11 libxcomposite libxfixes libxi libxrandr wayland', 'None', 'None', 'a modern 3D graphics API with associated utility APIs', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/cogl/1.14/cogl-1.14.0.tar.xz;name=archive', 'None', 'None']
inserted (cogl-1.0,1.14.0,1.15.2,LGPLv2.1+,base,r0,None,http://wiki.clutter-project.org/wiki/Cogl,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gdk-pixbuf gtk-doc-stub-native virtual/libgl libdrm pango virtual/libgl libdrm virtual/libx11 libxcomposite libxfixes libxi libxrandr wayland,a modern 3D graphics API with associated utility APIs,N/A,http://ftp.gnome.org/pub/GNOME/sources/cogl/1.14/cogl-1.14.0.tar.xz;name=archive,None)
['lttng-tools', 'v2.2.0', 'v2.2.0', 'GPLv2 & LGPLv2.1', 'devel', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc liburcu popt lttng-ust', 'None', 'None', 'The Linux trace toolkit is a suite of tools designed to extract program execution details from the Linux operating system and interpret them.', 'ErrUnknown:git.lttng.org/lttng-tools.git', 'N/A', 'git://git.lttng.org/lttng-tools.git;protocol=git', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (lttng-tools,v2.2.0,v2.2.0,GPLv2 & LGPLv2.1,devel,r0,None,unknown,None,ErrUnknown:git.lttng.org/lttng-tools.git,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc liburcu popt lttng-ust,The Linux trace toolkit is a suite of tools designed to extract program execution details from the Linux operating system and interpret them.,N/A,git://git.lttng.org/lttng-tools.git;protocol=git,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['sgmlspl-native', '1.03ii', '1.03ii', 'GPLv2+', 'libs', 'http://search.cpan.org/src/DMEGG/SGMLSpm-1.03ii/DOC/HTML/SGMLSpm/sgmlspm.html', 'r3', ' perl-native perl-native', 'None', 'None', 'A simple post-processor for SGMLS and NSGMLS', 'MATCH', 'N/A', 'http://www.cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-1.03ii.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (sgmlspl-native,1.03ii,1.03ii,GPLv2+,libs,r3,None,http://search.cpan.org/src/DMEGG/SGMLSpm-1.03ii/DOC/HTML/SGMLSpm/sgmlspm.html,None,MATCH, perl-native perl-native,A simple post-processor for SGMLS and NSGMLS,N/A,http://www.cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-1.03ii.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['xkbcomp', '1.2.4', '1.2.4', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxkbfile', 'https://bugs.freedesktop.org', 'None', 'The xkbcomp keymap compiler converts a description of an XKB keymap into one of several output formats. The most common use for xkbcomp is to create a compiled keymap file (.xkm extension) which can be read directly by XKB-capable X servers or utilities.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xkbcomp-1.2.4.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xkbcomp,1.2.4,1.2.4,MIT-X,x11/apps,r8.0,None,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxkbfile,The xkbcomp keymap compiler converts a description of an XKB keymap into one of several output formats. The most common use for xkbcomp is to create a compiled keymap file (.xkm extension) which can be read directly by XKB-capable X servers or utilities.,N/A,http://xorg.freedesktop.org/releases/individual/app/xkbcomp-1.2.4.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['flac', '1.2.1', '1.2.1', 'GFDL-1.2 & GPLv2+ & LGPLv2.1+ & BSD', 'libs', 'http://flac.sourceforge.net/', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg', 'http://sourceforge.net/tracker/?group_id=13478&atid=113478', 'None', 'FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/flac/flac-1.2.1.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (flac,1.2.1,1.2.1,GFDL-1.2 & GPLv2+ & LGPLv2.1+ & BSD,libs,r4,None,http://flac.sourceforge.net/,http://sourceforge.net/tracker/?group_id=13478&atid=113478,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg,FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless.,N/A,http://downloads.sourceforge.net/flac/flac-1.2.1.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['xf86miscproto', '0.9.3', '0.9.3', 'MIT', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the XFree miscellaneous extension. The XFree86-Misc extension provides a means to access input device configuration settings specific to the XFree86/Xorg DDX.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/xf86miscproto-0.9.3.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86miscproto,0.9.3,0.9.3,MIT,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the XFree miscellaneous extension. The XFree86-Misc extension provides a means to access input device configuration settings specific to the XFree86/Xorg DDX.,N/A,http://xorg.freedesktop.org/releases/individual/proto/xf86miscproto-0.9.3.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['xcb-util', '0.3.9', '0.3.9', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org/XcbUtil/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/xcb-util-0.3.9.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcb-util,0.3.9,0.3.9,MIT,x11/libs,r0,None,http://xcb.freedesktop.org/XcbUtil/,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native,The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.,N/A,http://xcb.freedesktop.org/dist/xcb-util-0.3.9.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libpam', '1.1.6', '1.1.6', 'GPLv2+ | BSD', 'base', 'https://fedorahosted.org/linux-pam/', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison flex flex-native cracklib', 'https://fedorahosted.org/linux-pam/newticket', 'None', 'Linux-PAM (Pluggable Authentication Modules for Linux), a flexible mechanism for authenticating users', 'MATCH', 'N/A', 'http://linux-pam.org/library/Linux-PAM-1.1.6.tar.bz2', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (libpam,1.1.6,1.1.6,GPLv2+ | BSD,base,r3,None,https://fedorahosted.org/linux-pam/,https://fedorahosted.org/linux-pam/newticket,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison flex flex-native cracklib,Linux-PAM (Pluggable Authentication Modules for Linux), a flexible mechanism for authenticating users,N/A,http://linux-pam.org/library/Linux-PAM-1.1.6.tar.bz2,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['libxsettings-client', '0.10', '0.10', 'MIT-style', 'x/libs', 'http://matchbox-project.org/sources/optional-dependencies/', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11', 'http://bugzilla.openedhand.com/', 'None', 'Libraries used for applications making use of the Xsettings configuration setting propagation protocol. Controls setting of double click timeout, drag-and-drop threshold, and default foreground and background colors for all applications running within a desktop.', 'MATCH', 'N/A', 'http://downloads.yoctoproject.org/releases/matchbox/optional-dependencies/Xsettings-client-0.10.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxsettings-client,0.10,0.10,MIT-style,x/libs,r5,None,http://matchbox-project.org/sources/optional-dependencies/,http://bugzilla.openedhand.com/,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11,Libraries used for applications making use of the Xsettings configuration setting propagation protocol. Controls setting of double click timeout, drag-and-drop threshold, and default foreground and background colors for all applications running within a desktop.,N/A,http://downloads.yoctoproject.org/releases/matchbox/optional-dependencies/Xsettings-client-0.10.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['mc', '4.8.9', '4.8.9', 'GPLv3', 'console/utils', 'http://www.midnight-commander.org/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses glib-2.0', 'None', 'None', 'Midnight Commander is an ncurses based file manager.', 'MATCH', 'N/A', 'http://www.midnight-commander.org/downloads/mc-4.8.9.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (mc,4.8.9,4.8.9,GPLv3,console/utils,r0,None,http://www.midnight-commander.org/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses glib-2.0,Midnight Commander is an ncurses based file manager.,N/A,http://www.midnight-commander.org/downloads/mc-4.8.9.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['libtasn1', '3.3', '3.3', 'GPLv3+ & LGPLv2.1+', 'base', 'http://www.gnu.org/software/libtasn1/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Library for ASN.1 and DER manipulation', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/libtasn1/libtasn1-3.3.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libtasn1,3.3,3.3,GPLv3+ & LGPLv2.1+,base,r0,None,http://www.gnu.org/software/libtasn1/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Library for ASN.1 and DER manipulation,N/A,ftp://ftp.gnu.org/gnu/libtasn1/libtasn1-3.3.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['bluez4', '4.101', '5.7', 'GPLv2+ & LGPLv2.1+', 'libs', 'http://www.bluez.org', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc udev libusb dbus-glib glib-2.0 libcheck readline alsa-lib', 'None', 'None', 'Linux Bluetooth stack V4 userland components. These include a system configurations, daemons, tools and system libraries.', 'UPDATE', 'N/A', 'http://kernel.org/pub/linux/bluetooth/bluez-4.101.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'BlueZ 5.x is not backward-compatible; components that interact with bluez not updated']
inserted (bluez4,4.101,5.7,GPLv2+ & LGPLv2.1+,libs,r5,None,http://www.bluez.org,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc udev libusb dbus-glib glib-2.0 libcheck readline alsa-lib,Linux Bluetooth stack V4 userland components. These include a system configurations, daemons, tools and system libraries.,N/A,http://kernel.org/pub/linux/bluetooth/bluez-4.101.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['bluez5', '5.7', '5.7', 'GPLv2+ & LGPLv2.1+', 'libs', 'http://www.bluez.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc udev libusb dbus-glib glib-2.0 libcheck libical readline alsa-lib', 'None', 'None', 'Linux Bluetooth stack V5 userland components. These include a system configurations, daemons, tools and system libraries.', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/bluetooth/bluez-5.7.tar.gz', 'None', 'None']
inserted (bluez5,5.7,5.7,GPLv2+ & LGPLv2.1+,libs,r0,None,http://www.bluez.org,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc udev libusb dbus-glib glib-2.0 libcheck libical readline alsa-lib,Linux Bluetooth stack V5 userland components. These include a system configurations, daemons, tools and system libraries.,N/A,http://kernel.org/pub/linux/bluetooth/bluez-5.7.tar.gz,None)
['nativesdk-qt4-tools', '4.8.5', '4.8.5', 'LGPLv2.1 | GPLv3', 'libs', 'http://qt-project.org/', 'r0', 'nativesdk-dbus qt4-tools-native virtual/i586-pokysdk-linux-gcc-crosssdk nativesdk-zlib nativesdk-libx11 virtual/nativesdk-i586-pokysdk-linux-compilerlibs chrpath-replacement-native qt4-native virtual/nativesdk-libc', 'None', 'None', 'SDK tools for Qt/[X11|Mac|Embedded] version 4.x', 'MATCH', 'N/A', 'http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (nativesdk-qt4-tools,4.8.5,4.8.5,LGPLv2.1 | GPLv3,libs,r0,None,http://qt-project.org/,None,MATCH,nativesdk-dbus qt4-tools-native virtual/i586-pokysdk-linux-gcc-crosssdk nativesdk-zlib nativesdk-libx11 virtual/nativesdk-i586-pokysdk-linux-compilerlibs chrpath-replacement-native qt4-native virtual/nativesdk-libc,SDK tools for Qt/[X11|Mac|Embedded] version 4.x,N/A,http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['xcb-util-renderutil', '0.3.8', '0.3.8', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org/XcbUtil/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/xcb-util-renderutil-0.3.8.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (xcb-util-renderutil,0.3.8,0.3.8,MIT,x11/libs,r0,None,http://xcb.freedesktop.org/XcbUtil/,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native,The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.,N/A,http://xcb.freedesktop.org/dist/xcb-util-renderutil-0.3.8.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['xorg-cf-files', '1.0.4', '1.0.5', 'MIT-X', 'x11/utils', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc font-util', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', 'None', 'Data files for the imake utility', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/util/xorg-cf-files-1.0.4.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (xorg-cf-files,1.0.4,1.0.5,MIT-X,x11/utils,r1,None,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc font-util,Data files for the imake utility,N/A,http://xorg.freedesktop.org/releases/individual/util/xorg-cf-files-1.0.4.tar.gz,Saul Wold <sgw@linux.intel.com>)
['libxvmc', '1.0.8', '1.0.8', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext libxv videoproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'XvMC extends the X Video extension (Xv) and enables hardware rendered motion compensation support.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXvMC-1.0.8.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxvmc,1.0.8,1.0.8,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext libxv videoproto,XvMC extends the X Video extension (Xv) and enables hardware rendered motion compensation support.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXvMC-1.0.8.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['ossp-uuid', '1.6.2', '1.6.2', 'MIT', 'libs', 'http://www.ossp.org/pkg/lib/uuid/', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'OSSP uuid is a ISO-C:1999 application programming interface (API) and corresponding command line interface (CLI) for the generation of DCE 1.1, ISO/IEC 11578:1996 and RFC 4122 compliant Universally Unique Identifier (UUID). It supports DCE 1.1 variant UUIDs of version 1 (time and node based), version 3 (name based, MD5), version 4 (random number based) and version 5 (name based, SHA-1).', 'MATCH', 'N/A', 'ftp://ftp.ossp.org/pkg/lib/uuid/uuid-1.6.2.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (ossp-uuid,1.6.2,1.6.2,MIT,libs,r2,None,http://www.ossp.org/pkg/lib/uuid/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,OSSP uuid is a ISO-C:1999 application programming interface (API) and corresponding command line interface (CLI) for the generation of DCE 1.1, ISO/IEC 11578:1996 and RFC 4122 compliant Universally Unique Identifier (UUID). It supports DCE 1.1 variant UUIDs of version 1 (time and node based), version 3 (name based, MD5), version 4 (random number based) and version 5 (name based, SHA-1).,N/A,ftp://ftp.ossp.org/pkg/lib/uuid/uuid-1.6.2.tar.gz,Saul Wold <sgw@linux.intel.com>)
['xineramaproto', '1.2.1', '1.2.1', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the Xinerama extension. This extension is used for retrieving information about physical output devices which may be combined into a single logical X screen.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/xineramaproto-1.2.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xineramaproto,1.2.1,1.2.1,MIT & MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the Xinerama extension. This extension is used for retrieving information about physical output devices which may be combined into a single logical X screen.,N/A,http://xorg.freedesktop.org/releases/individual/proto/xineramaproto-1.2.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['iptables', '1.4.19.1', '1.4.19.1', 'GPLv2+', 'base', 'http://www.netfilter.org/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://bugzilla.netfilter.org/', 'None', 'iptables is the userspace command line program used to configure and control network packet filtering code in Linux.', 'MATCH', 'N/A', 'http://netfilter.org/projects/iptables/files/iptables-1.4.19.1.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (iptables,1.4.19.1,1.4.19.1,GPLv2+,base,r0,None,http://www.netfilter.org/,http://bugzilla.netfilter.org/,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,iptables is the userspace command line program used to configure and control network packet filtering code in Linux.,N/A,http://netfilter.org/projects/iptables/files/iptables-1.4.19.1.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['neard', '0.10+gitAUTOINC+eb486bf35e', '0.12+gitAUTOINC+3c92a37', 'GPLv2', 'base', 'http://01.org/linux-nfc', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 libnl update-rc.d-native', 'None', 'None', 'A daemon for the Linux Near Field Communication stack', 'UPDATE', 'N/A', 'git://git.kernel.org/pub/scm/network/nfc/neard.git;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (neard,0.10+gitAUTOINC+eb486bf35e,0.12+gitAUTOINC+3c92a37,GPLv2,base,r0,None,http://01.org/linux-nfc,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 libnl update-rc.d-native,A daemon for the Linux Near Field Communication stack,N/A,git://git.kernel.org/pub/scm/network/nfc/neard.git;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['xcb-util-wm', '0.3.9', '0.3.9', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org/XcbUtil/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/xcb-util-wm-0.3.9.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcb-util-wm,0.3.9,0.3.9,MIT,x11/libs,r0,None,http://xcb.freedesktop.org/XcbUtil/,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxcb gperf-native,The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib.,N/A,http://xcb.freedesktop.org/dist/xcb-util-wm-0.3.9.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['diffstat', '1.57', '1.57', 'MIT', 'devel', 'http://invisible-island.net/diffstat/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'diffstat reads the output of diff and displays a histogram of the insertions, deletions, and modifications per-file. It is useful for reviewing large, complex patch files.', 'MATCH', 'N/A', 'ftp://invisible-island.net/diffstat/diffstat-1.57.tgz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (diffstat,1.57,1.57,MIT,devel,r0,None,http://invisible-island.net/diffstat/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,diffstat reads the output of diff and displays a histogram of the insertions, deletions, and modifications per-file. It is useful for reviewing large, complex patch files.,N/A,ftp://invisible-island.net/diffstat/diffstat-1.57.tgz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['gstreamer1.0-plugins-bad', '1.0.7', '1.1.2', 'GPLv2+ & LGPLv2+ & LGPLv2.1+ ', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base bzip2 virtual/egl virtual/libgles2 wayland curl', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer 1.x', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0-plugins-bad,1.0.7,1.1.2,GPLv2+ & LGPLv2+ & LGPLv2.1+ ,multimedia,r1,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base bzip2 virtual/egl virtual/libgles2 wayland curl,Plugins for GStreamer 1.x,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['sudo', '1.8.6p8', '1.8.7', 'ISC & BSD & Zlib', 'admin', 'http://www.sudo.ws', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://www.sudo.ws/bugs/', 'None', 'Sudo (superuser do) allows a system administrator to give certain users (or groups of users) the ability to run some (or all) commands as root while logging all commands and arguments.', 'UPDATE', 'N/A', 'http://ftp.sudo.ws/sudo/dist/sudo-1.8.6p8.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (sudo,1.8.6p8,1.8.7,ISC & BSD & Zlib,admin,r0,None,http://www.sudo.ws,http://www.sudo.ws/bugs/,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Sudo (superuser do) allows a system administrator to give certain users (or groups of users) the ability to run some (or all) commands as root while logging all commands and arguments.,N/A,http://ftp.sudo.ws/sudo/dist/sudo-1.8.6p8.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['calibrateproto', '0.0+gitAUTOINC+1da6fd1e2c', '0.0+gitAUTOINC+1da6fd1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', 'None', 'This package provides the wire protocol for the Touchscreen calibration extension.', 'MATCH', 'N/A', 'git://anongit.freedesktop.org/git/xorg/proto/calibrateproto;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (calibrateproto,0.0+gitAUTOINC+1da6fd1e2c,0.0+gitAUTOINC+1da6fd1,MIT-style,x11/libs,r2,None,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the Touchscreen calibration extension.,N/A,git://anongit.freedesktop.org/git/xorg/proto/calibrateproto;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['openssl', '1.0.1e', '1.0.1e', 'openssl', 'libs/network', 'http://www.openssl.org/', 'r15.0', 'pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl-native-runtime ocf-linux', 'http://www.openssl.org/news/vulnerabilities.html', 'None', 'Secure Socket Layer (SSL) binary and related cryptographic tools.', 'MATCH', 'N/A', 'http://www.openssl.org/source/openssl-1.0.1e.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', '1.0.1 is beta 1.0.0c is latest']
inserted (openssl,1.0.1e,1.0.1e,openssl,libs/network,r15.0,None,http://www.openssl.org/,http://www.openssl.org/news/vulnerabilities.html,MATCH,pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl-native-runtime ocf-linux,Secure Socket Layer (SSL) binary and related cryptographic tools.,N/A,http://www.openssl.org/source/openssl-1.0.1e.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['sysvinit-inittab', '2.88dsf', 'INVALID', 'GPLv2', 'base', 'unknown', 'r9', ' ', 'None', 'None', 'Inittab for sysvinit', 'MATCH', 'N/A', 'file://inittab', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (sysvinit-inittab,2.88dsf,INVALID,GPLv2,base,r9,None,unknown,None,MATCH, ,Inittab for sysvinit,N/A,file://inittab,Saul Wold <sgw@linux.intel.com>)
['logrotate', '3.8.1', '3.8.1', 'GPLv2', 'console/utils', 'https://fedorahosted.org/releases/l/o/logrotate', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc coreutils popt', 'None', 'None', 'Rotates, compresses, removes and mails system log files', 'MATCH', 'N/A', 'https://fedorahosted.org/releases/l/o/logrotate/logrotate-3.8.1.tar.gz', 'Robert Yang <liezhi.yang@windriver.com>', 'None']
inserted (logrotate,3.8.1,3.8.1,GPLv2,console/utils,r0,None,https://fedorahosted.org/releases/l/o/logrotate,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc coreutils popt,Rotates, compresses, removes and mails system log files,N/A,https://fedorahosted.org/releases/l/o/logrotate/logrotate-3.8.1.tar.gz,Robert Yang <liezhi.yang@windriver.com>)
['gdb-cross-canadian-i586', '7.6', '7.6', 'GPLv2 & GPLv3 & LGPLv2 & LGPLv3', 'devel', 'http://www.gnu.org/software/gdb/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native nativesdk-ncurses nativesdk-expat nativesdk-gettext nativesdk-readline nativesdk-python chrpath-replacement-native', 'None', 'None', 'cross-canadian gdb for i586 target - GNU debugger', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gdb/gdb-7.6.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gdb-cross-canadian-i586,7.6,7.6,GPLv2 & GPLv3 & LGPLv2 & LGPLv3,devel,r0,None,http://www.gnu.org/software/gdb/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native nativesdk-ncurses nativesdk-expat nativesdk-gettext nativesdk-readline nativesdk-python chrpath-replacement-native,cross-canadian gdb for i586 target - GNU debugger,N/A,ftp://ftp.gnu.org/gnu/gdb/gdb-7.6.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['xauth', '1.0.7', '1.0.7', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxau libxext libxmu', 'https://bugs.freedesktop.org', '1', 'X application to edit and display the authorization information used in connecting to the X server.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xauth-1.0.7.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xauth,1.0.7,1.0.7,MIT-X,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxau libxext libxmu,X application to edit and display the authorization information used in connecting to the X server.,N/A,http://xorg.freedesktop.org/releases/individual/app/xauth-1.0.7.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gsettings-desktop-schemas', '3.7.3', '3.9.3', 'LGPLv2.1', 'base', 'http://live.gnome.org/gsettings-desktop-schemas', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info glib-2.0-native', 'https://bugzilla.gnome.org/', 'None', 'A collection of GSettings schemas for settings shared by various components of a desktop', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/gsettings-desktop-schemas/3.7/gsettings-desktop-schemas-3.7.3.tar.xz;name=archive', 'None', 'None']
inserted (gsettings-desktop-schemas,3.7.3,3.9.3,LGPLv2.1,base,r1,None,http://live.gnome.org/gsettings-desktop-schemas,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info glib-2.0-native,A collection of GSettings schemas for settings shared by various components of a desktop,N/A,http://ftp.gnome.org/pub/GNOME/sources/gsettings-desktop-schemas/3.7/gsettings-desktop-schemas-3.7.3.tar.xz;name=archive,None)
['videoproto', '2.3.1', '2.3.2', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Video extension. This extension alows for accerlated drawing of videos.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/videoproto-2.3.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (videoproto,2.3.1,2.3.2,MIT & MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Video extension. This extension alows for accerlated drawing of videos.,N/A,http://xorg.freedesktop.org/releases/individual/proto/videoproto-2.3.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['gcc', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc mpfr gmp libmpc zlib ', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc mpfr gmp libmpc zlib ,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['lame', '3.99.5', '3.99.5', 'LGPLv2+', 'console/utils', 'http://sourceforge.net/projects/lame/files/lame/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://sourceforge.net/tracker/?group_id=290&atid=100290', 'None', 'LAME is an educational tool to be used for learning about MP3 encoding.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/lame/lame-3.99.5.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (lame,3.99.5,3.99.5,LGPLv2+,console/utils,r1,None,http://sourceforge.net/projects/lame/files/lame/,http://sourceforge.net/tracker/?group_id=290&atid=100290,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,LAME is an educational tool to be used for learning about MP3 encoding.,N/A,http://downloads.sourceforge.net/lame/lame-3.99.5.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['systemd-systemctl-native', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r6', ' ', 'None', 'None', 'Wrapper to enable of systemd services', 'MATCH', 'N/A', 'file://systemctl', 'None', 'None']
inserted (systemd-systemctl-native,1.0,INVALID,MIT,base,r6,None,unknown,None,MATCH, ,Wrapper to enable of systemd services,N/A,file://systemctl,None)
['alsa-lib', '1.0.26', '1.0.27.2', 'LGPLv2.1 & GPLv2+', 'libs/multimedia', 'http://www.alsa-project.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'https://bugtrack.alsa-project.org/alsa-bug/login_page.php', 'None', 'Alsa sound library', 'UPDATE', 'N/A', 'ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.26.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (alsa-lib,1.0.26,1.0.27.2,LGPLv2.1 & GPLv2+,libs/multimedia,r0,None,http://www.alsa-project.org,https://bugtrack.alsa-project.org/alsa-bug/login_page.php,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Alsa sound library,N/A,ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.26.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['libtool-cross', '2.4.2', '2.4.2', 'GPLv2 & LGPLv2.1', 'devel', 'http://www.gnu.org/software/libtool/libtool.html', 'r6.1', 'autoconf-native automake-native gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-native', 'None', 'None', 'This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (libtool-cross,2.4.2,2.4.2,GPLv2 & LGPLv2.1,devel,r6.1,None,http://www.gnu.org/software/libtool/libtool.html,None,MATCH,autoconf-native automake-native gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-native,This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface.,N/A,ftp://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['librsvg', '2.32.1', '2.37.0', 'LGPLv2+', 'x11/utils', 'http://ftp.gnome.org/pub/GNOME/sources/librsvg/', 'r12', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cairo glib-2.0 gdk-pixbuf fontconfig freetype libxml2 pango gdk-pixbuf-native gnome-common-native qemu-native gtk-doc-stub-native libcroco', 'https://bugzilla.gnome.org/', 'None', 'Library for rendering SVG files', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/librsvg/2.32/librsvg-2.32.1.tar.bz2;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (librsvg,2.32.1,2.37.0,LGPLv2+,x11/utils,r12,None,http://ftp.gnome.org/pub/GNOME/sources/librsvg/,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cairo glib-2.0 gdk-pixbuf fontconfig freetype libxml2 pango gdk-pixbuf-native gnome-common-native qemu-native gtk-doc-stub-native libcroco,Library for rendering SVG files,N/A,http://ftp.gnome.org/pub/GNOME/sources/librsvg/2.32/librsvg-2.32.1.tar.bz2;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['libsndfile1', '1.0.25', '1.0.25', 'LGPLv2.1', 'libs/multimedia', 'http://www.mega-nerd.com/libsndfile', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc sqlite3 alsa-lib', 'None', 'None', 'An audio format Conversion library', 'MATCH', 'N/A', 'http://www.mega-nerd.com/libsndfile/files/libsndfile-1.0.25.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libsndfile1,1.0.25,1.0.25,LGPLv2.1,libs/multimedia,r1,None,http://www.mega-nerd.com/libsndfile,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc sqlite3 alsa-lib,An audio format Conversion library,N/A,http://www.mega-nerd.com/libsndfile/files/libsndfile-1.0.25.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['fstests', '0.1+gitAUTOINC+218b99d82b', '0.1+gitAUTOINC+218b99d', 'Zlib', 'devel', 'http://www.o-hand.com', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pango libxext libxft virtual/libx11 gtk+', 'None', 'None', 'Various benchmarning tests for X', 'MATCH', '0.0+svnr426', 'git://git.yoctoproject.org/fstests;protocol=git', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (fstests,0.1+gitAUTOINC+218b99d82b,0.1+gitAUTOINC+218b99d,Zlib,devel,r0,None,http://www.o-hand.com,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pango libxext libxft virtual/libx11 gtk+,Various benchmarning tests for X,0.0+svnr426,git://git.yoctoproject.org/fstests;protocol=git,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['mkelfimage', '4.0+gitAUTOINC+686a48a339', '4.0+gitAUTOINC+026ff3e', 'GPLv2', 'devel', 'http://www.coreboot.org/Mkelfimage', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib', 'None', 'None', 'A utility to create ELF boot images for ELF-based Linux kernel images', 'UPDATE', 'N/A', 'git://review.coreboot.org/p/coreboot;protocol=http', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (mkelfimage,4.0+gitAUTOINC+686a48a339,4.0+gitAUTOINC+026ff3e,GPLv2,devel,r0,None,http://www.coreboot.org/Mkelfimage,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib,A utility to create ELF boot images for ELF-based Linux kernel images,N/A,git://review.coreboot.org/p/coreboot;protocol=http,Saul Wold <sgw@linux.intel.com>)
['gtk-engines', '2.20.2', '2.91.1', 'LGPLv2.1', 'x11/base', 'http://www.gnome.org/', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info', 'https://bugzilla.gnome.org/', 'None', 'GTK theme engines', 'UPDATE', '2.91.1', 'http://ftp.gnome.org/pub/GNOME/sources/gtk-engines/2.20/gtk-engines-2.20.2.tar.bz2;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', '2.91.1 is a 3.0 beta release']
inserted (gtk-engines,2.20.2,2.91.1,LGPLv2.1,x11/base,r3,None,http://www.gnome.org/,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info,GTK theme engines,2.91.1,http://ftp.gnome.org/pub/GNOME/sources/gtk-engines/2.20/gtk-engines-2.20.2.tar.bz2;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['python-dbus', '1.2.0', '1.2.0', 'MIT', 'devel/python', 'http://www.freedesktop.org/Software/dbus', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat dbus dbus-glib virtual/libintl python-pyrex-native python-native python python-native ', 'None', 'None', 'Python bindings for DBus, a socket-based message bus system for interprocess communication', 'MATCH', 'N/A', 'http://dbus.freedesktop.org/releases/dbus-python/dbus-python-1.2.0.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-dbus,1.2.0,1.2.0,MIT,devel/python,r0,None,http://www.freedesktop.org/Software/dbus,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat dbus dbus-glib virtual/libintl python-pyrex-native python-native python python-native ,Python bindings for DBus, a socket-based message bus system for interprocess communication,N/A,http://dbus.freedesktop.org/releases/dbus-python/dbus-python-1.2.0.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libcheck', '0.9.10', '0.9.10', 'LGPLv2.1+', 'devel', 'http://check.sourceforge.net/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Check Test Framework', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/check/check-0.9.10.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libcheck,0.9.10,0.9.10,LGPLv2.1+,devel,r0,None,http://check.sourceforge.net/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Check Test Framework,N/A,http://downloads.sourceforge.net/check/check-0.9.10.tar.gz,Saul Wold <sgw@linux.intel.com>)
['eee-acpi-scripts', '1.1.12+gitAUTOINC+9d4cdedca2', '1.1.12+gitAUTOINC+9d4cded', 'GPLv2', 'base', 'http://alioth.debian.org/projects/debian-eeepc/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'eeePC specific ACPI scripts', 'MATCH', '1.1.12+9d4cdedca25b396405f8587f9c4fbf8229e041c2', 'git://git.debian.org/git/debian-eeepc/eeepc-acpi-scripts.git;protocol=git', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (eee-acpi-scripts,1.1.12+gitAUTOINC+9d4cdedca2,1.1.12+gitAUTOINC+9d4cded,GPLv2,base,r0,None,http://alioth.debian.org/projects/debian-eeepc/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,eeePC specific ACPI scripts,1.1.12+9d4cdedca25b396405f8587f9c4fbf8229e041c2,git://git.debian.org/git/debian-eeepc/eeepc-acpi-scripts.git;protocol=git,Radu Moisan <radu.moisan@intel.com>)
['gperf', '3.0.4', '3.0.4', 'GPLv3+', 'base', 'http://www.gnu.org/software/gperf', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'GNU gperf is a perfect hash function generator', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gperf/gperf-3.0.4.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (gperf,3.0.4,3.0.4,GPLv3+,base,r0,None,http://www.gnu.org/software/gperf,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,GNU gperf is a perfect hash function generator,N/A,ftp://ftp.gnu.org/gnu/gperf/gperf-3.0.4.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['owl-video', '0.1+gitAUTOINC+07ab48f331', '0.1+gitAUTOINC+07ab48f', 'LGPLv2.1 & GPLv2+', 'x11', 'http://o-hand.com/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libowl-av', 'http://bugzilla.o-hand.com/', 'None', 'OpenedHand Widget Library video widget', 'MATCH', 'N/A', 'git://git.yoctoproject.org/owl-video;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (owl-video,0.1+gitAUTOINC+07ab48f331,0.1+gitAUTOINC+07ab48f,LGPLv2.1 & GPLv2+,x11,r2,None,http://o-hand.com/,http://bugzilla.o-hand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libowl-av,OpenedHand Widget Library video widget,N/A,git://git.yoctoproject.org/owl-video;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['ptest-runner', '1.0', 'INVALID', 'MIT', 'base', 'https://wiki.yoctoproject.org/wiki/Ptest', 'r0', ' ', 'None', 'None', 'The ptest-runner package installs a ptest-runner shell script which loops through all installed ptest test suites and runs them in sequence.', 'MATCH', 'N/A', 'file://ptest-runner', 'None', 'None']
inserted (ptest-runner,1.0,INVALID,MIT,base,r0,None,https://wiki.yoctoproject.org/wiki/Ptest,None,MATCH, ,The ptest-runner package installs a ptest-runner shell script which loops through all installed ptest test suites and runs them in sequence.,N/A,file://ptest-runner,None)
['linux-libc-headers-yocto', '3.4+git-AUTOINC+a1cdb60720_a1cdb60720', '3.4.52+git-AUTOINC+7eb5fbf', 'GPLv2', 'devel', 'unknown', 'r6', ' unifdef-native', 'None', 'None', "Sanitized set of kernel headers for the C library's use.", 'UPDATE', 'N/A', 'git://git.yoctoproject.org/linux-yocto-3.4.git;protocol=git;nocheckout=1;branch=standard/base,meta;name=machine,meta', 'Bruce Ashfield <bruce.ashfield@windriver.com>', 'None']
inserted (linux-libc-headers-yocto,3.4+git-AUTOINC+a1cdb60720_a1cdb60720,3.4.52+git-AUTOINC+7eb5fbf,GPLv2,devel,r6,None,unknown,None,UPDATE, unifdef-native,Sanitized set of kernel headers for the C library's use.,N/A,git://git.yoctoproject.org/linux-yocto-3.4.git;protocol=git;nocheckout=1;branch=standard/base,meta;name=machine,meta,Bruce Ashfield <bruce.ashfield@windriver.com>)
['linux-yocto-tiny', '3.8.13+gitAUTOINC+8ef9136539_f20047520a', '3.8.13+gitAUTOINC+d4235f1', 'GPLv2', 'kernel', 'unknown', 'r4.1', ' virtual/i586-poky-linux-binutils virtual/i586-poky-linux-gcc kmod-native depmodwrapper-cross xz-native', 'None', 'None', 'Yocto Kernel', 'UPDATE', 'N/A', 'git://git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;bareclone=1;branch=standard/tiny/base,meta;name=machine,meta', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (linux-yocto-tiny,3.8.13+gitAUTOINC+8ef9136539_f20047520a,3.8.13+gitAUTOINC+d4235f1,GPLv2,kernel,r4.1,None,unknown,None,UPDATE, virtual/i586-poky-linux-binutils virtual/i586-poky-linux-gcc kmod-native depmodwrapper-cross xz-native,Yocto Kernel,N/A,git://git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;bareclone=1;branch=standard/tiny/base,meta;name=machine,meta,Saul Wold <sgw@linux.intel.com>)
['mesa', '9.1.5', '9.1.5', 'MIT', 'x11', 'http://mesa3d.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat makedepend-native flex-native bison-native python-native dri2proto libdrm udev wayland xf86driproto glproto virtual/libx11 libxext libxxf86vm libxdamage libxfixes', 'https://bugs.freedesktop.org', '2', 'Mesa is an open-source implementation of the OpenGL specification - a system for rendering interactive 3D graphics. A variety of device drivers allows Mesa to be used in many different environments ranging from software emulation to complete hardware acceleration for modern GPUs. Mesa is used as part of the overall Direct Rendering Infrastructure and X.org environment.', 'MATCH', 'N/A', 'ftp://ftp.freedesktop.org/pub/mesa/9.1.5/MesaLib-9.1.5.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (mesa,9.1.5,9.1.5,MIT,x11,r0,2,http://mesa3d.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat makedepend-native flex-native bison-native python-native dri2proto libdrm udev wayland xf86driproto glproto virtual/libx11 libxext libxxf86vm libxdamage libxfixes,Mesa is an open-source implementation of the OpenGL specification - a system for rendering interactive 3D graphics. A variety of device drivers allows Mesa to be used in many different environments ranging from software emulation to complete hardware acceleration for modern GPUs. Mesa is used as part of the overall Direct Rendering Infrastructure and X.org environment.,N/A,ftp://ftp.freedesktop.org/pub/mesa/9.1.5/MesaLib-9.1.5.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['compositeproto', '0.4.2', '0.4.2', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X composite extension. The X composite extension provides three related mechanisms for compositing and off-screen storage.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/compositeproto-0.4.2.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (compositeproto,0.4.2,0.4.2,MIT & MIT-style,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X composite extension. The X composite extension provides three related mechanisms for compositing and off-screen storage.,N/A,http://xorg.freedesktop.org/releases/individual/proto/compositeproto-0.4.2.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libxfixes', '5.0.1', '5.0.1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 xproto fixesproto xextproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'X applications have often needed to work around various shortcomings in the core X window system. This extension is designed to provide the minimal server-side support necessary to eliminate problems caused by these workarounds.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXfixes-5.0.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxfixes,5.0.1,5.0.1,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 xproto fixesproto xextproto,X applications have often needed to work around various shortcomings in the core X window system. This extension is designed to provide the minimal server-side support necessary to eliminate problems caused by these workarounds.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXfixes-5.0.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['man', '1.6g', '1.6g', 'GPLv2', 'console/utils', 'http://primates.ximian.com/~flucifredi/man', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc groff less', 'None', 'None', 'A set of documentation tools: man, apropos and whatis', 'MATCH', 'N/A', 'http://primates.ximian.com/~flucifredi/man/man-1.6g.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (man,1.6g,1.6g,GPLv2,console/utils,r1,None,http://primates.ximian.com/~flucifredi/man,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc groff less,A set of documentation tools: man, apropos and whatis,N/A,http://primates.ximian.com/~flucifredi/man/man-1.6g.tar.gz,Saul Wold <sgw@linux.intel.com>)
['bind', '9.8.1', '9.9.3-P1', 'ISC & BSD', 'console/network', 'http://www.isc.org/sw/bind/', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc openssl libcap update-rc.d-native', 'None', 'None', 'ISC Internet Domain Name Server', 'UPDATE', 'N/A', 'ftp://ftp.isc.org/isc/bind9/9.8.1/bind-9.8.1.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (bind,9.8.1,9.9.3-P1,ISC & BSD,console/network,r5,None,http://www.isc.org/sw/bind/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc openssl libcap update-rc.d-native,ISC Internet Domain Name Server,N/A,ftp://ftp.isc.org/isc/bind9/9.8.1/bind-9.8.1.tar.gz,Kai Kang <kai.kang@windriver.com>)
['libx11', '1.5.0', '1.6.0', 'MIT & MIT-style & BSD', 'x11/libs', 'http://www.x.org', 'r10.3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto xextproto xtrans libxcb kbproto inputproto xproto-native', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', "This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system.", 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libX11-1.5.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libx11,1.5.0,1.6.0,MIT & MIT-style & BSD,x11/libs,r10.3,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto xextproto xtrans libxcb kbproto inputproto xproto-native,This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libX11-1.5.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['python-smmap', '0.8.2', '0.8.2', 'BSD', 'devel/python', 'http://github.com/gitpython-developers/GitPython', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native python-setuptools-native', 'None', 'None', 'A pure Python implementation of a sliding memory map to help unifying memory mapped access on 32 and 64 bit systems and to help managing resources more efficiently.', 'MATCH', 'N/A', 'http://pypi.python.org/packages/source/s/smmap/smmap-0.8.2.tar.gz', 'None', 'None']
inserted (python-smmap,0.8.2,0.8.2,BSD,devel/python,r0,None,http://github.com/gitpython-developers/GitPython,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native python-setuptools-native,A pure Python implementation of a sliding memory map to help unifying memory mapped access on 32 and 64 bit systems and to help managing resources more efficiently.,N/A,http://pypi.python.org/packages/source/s/smmap/smmap-0.8.2.tar.gz,None)
['libxkbfile', '1.0.8', '1.0.8', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 kbproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libxkbfile provides an interface to read and manipulate description files for XKB, the X11 keyboard configuration extension.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libxkbfile-1.0.8.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxkbfile,1.0.8,1.0.8,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 kbproto,libxkbfile provides an interface to read and manipulate description files for XKB, the X11 keyboard configuration extension.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libxkbfile-1.0.8.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['fotowall', '0.9', '0.9', 'GPLv2+', 'x11/apps', 'http://www.enricoros.com/opensource/fotowall', 'r4', 'qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Fotowall is a creative tool that allows you to layout your photos or pictures in a personal way. You can add pictures, then resize, move, change colors, text, shadows, etc..', 'MATCH', 'N/A', 'http://qt-apps.org/CONTENT/content-files/71316-Fotowall-0.9.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (fotowall,0.9,0.9,GPLv2+,x11/apps,r4,None,http://www.enricoros.com/opensource/fotowall,None,MATCH,qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Fotowall is a creative tool that allows you to layout your photos or pictures in a personal way. You can add pictures, then resize, move, change colors, text, shadows, etc..,N/A,http://qt-apps.org/CONTENT/content-files/71316-Fotowall-0.9.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['pciutils', '3.2.0', '3.2.0', 'GPLv2+', 'console/utils', 'http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib kmod', 'None', 'None', 'The PCI Utilities package contains a library for portable access to PCI bus configuration space and several utilities based on this library.', 'MATCH', 'N/A', 'http://kernel.org/pub/software/utils/pciutils/pciutils-3.2.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (pciutils,3.2.0,3.2.0,GPLv2+,console/utils,r0,None,http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib kmod,The PCI Utilities package contains a library for portable access to PCI bus configuration space and several utilities based on this library.,N/A,http://kernel.org/pub/software/utils/pciutils/pciutils-3.2.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libfile-checktree-perl', '4.41', '4.41', 'Artistic-1.0 | GPL-1.0+', 'libs', 'http://search.cpan.org/~flora/File-CheckTree/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', 'The validate() routine takes a single multiline string consisting of directives, each containing a filename plus a file test to try on it. (The file test may also be a "cd", causing subsequent relative filenames to be interpreted relative to that directory.) After the file test you may put || die to make it a fatal error if the file test fails. The default is || warn. The file test may optionally have a "!\' prepended to test for the opposite condition. If you do a cd and then list some relative filenames, you may want to indent them slightly for readability. If you supply your own die() or warn() message, you can use $file to interpolate the filename. Filetests may be bunched: "-rwx" tests for all of -r, -w, and -x. Only the first failed test of the bunch will produce a warning. The routine returns the number of warnings issued.', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/F/FL/FLORA/File-CheckTree-4.41.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libfile-checktree-perl,4.41,4.41,Artistic-1.0 | GPL-1.0+,libs,r0,None,http://search.cpan.org/~flora/File-CheckTree/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,The validate() routine takes a single multiline string consisting of directives, each containing a filename plus a file test to try on it. (The file test may also be a "cd", causing subsequent relative filenames to be interpreted relative to that directory.) After the file test you may put || die to make it a fatal error if the file test fails. The default is || warn. The file test may optionally have a "!' prepended to test for the opposite condition. If you do a cd and then list some relative filenames, you may want to indent them slightly for readability. If you supply your own die() or warn() message, you can use $file to interpolate the filename. Filetests may be bunched: "-rwx" tests for all of -r, -w, and -x. Only the first failed test of the bunch will produce a warning. The routine returns the number of warnings issued.,N/A,http://search.cpan.org/CPAN/authors/id/F/FL/FLORA/File-CheckTree-4.41.tar.gz,Saul Wold <sgw@linux.intel.com>)
['foomatic-filters', '4.0.17', '4.0.17', 'GPLv2+', 'base', 'unknown', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cups perl libxml2', 'None', 'None', 'Foomatic is a printer database designed to make it easier to set up common printers for use with UNIX-like operating systems.It provides the "glue" between a print spooler (like CUPS or lpr) and the printer, by processing files sent to the printer. This package consists of filters used by the printer spoolers to convert the incoming PostScript data into the printer\'s native format using a printer-specific, but spooler-independent PPD file. ', 'MATCH', 'N/A', 'http://www.openprinting.org/download/foomatic/foomatic-filters-4.0.17.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (foomatic-filters,4.0.17,4.0.17,GPLv2+,base,r1,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cups perl libxml2,Foomatic is a printer database designed to make it easier to set up common printers for use with UNIX-like operating systems.It provides the "glue" between a print spooler (like CUPS or lpr) and the printer, by processing files sent to the printer. This package consists of filters used by the printer spoolers to convert the incoming PostScript data into the printer's native format using a printer-specific, but spooler-independent PPD file. ,N/A,http://www.openprinting.org/download/foomatic/foomatic-filters-4.0.17.tar.gz,Saul Wold <sgw@linux.intel.com>)
['qt-mobility-embedded', '1.2.0', '1.2.0', 'LGPLv2.1', 'libs', 'http://qt-project.org/', 'r8', 'qt4-tools-native qt4-embedded virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer util-linux pulseaudio bluez4', 'None', 'None', 'Qt Mobility 1.2.0 - version for Qt/Embedded', 'MATCH', 'N/A', 'http://get.qt.nokia.com/qt/add-ons/qt-mobility-opensource-src-1.2.0.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt-mobility-embedded,1.2.0,1.2.0,LGPLv2.1,libs,r8,None,http://qt-project.org/,None,MATCH,qt4-tools-native qt4-embedded virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer util-linux pulseaudio bluez4,Qt Mobility 1.2.0 - version for Qt/Embedded,N/A,http://get.qt.nokia.com/qt/add-ons/qt-mobility-opensource-src-1.2.0.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['libuser', '0.58', '0.58', 'LGPLv2', 'base', 'https://fedorahosted.org/libuser/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc popt libpam glib-2.0 xz-native docbook-utils-native linuxdoc-tools-native python python-native ', 'https://fedorahosted.org/libuser/newticket', 'None', 'The libuser library implements a standardized interface for manipulating and administering user and group accounts', 'MATCH', 'N/A', 'https://fedorahosted.org/releases/l/i/libuser/libuser-0.58.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libuser,0.58,0.58,LGPLv2,base,r0,None,https://fedorahosted.org/libuser/,https://fedorahosted.org/libuser/newticket,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc popt libpam glib-2.0 xz-native docbook-utils-native linuxdoc-tools-native python python-native ,The libuser library implements a standardized interface for manipulating and administering user and group accounts,N/A,https://fedorahosted.org/releases/l/i/libuser/libuser-0.58.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['lsb', '4.1', '1.4', 'GPLv2+', 'console/utils', 'http://prdownloads.sourceforge.net/lsb', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'LSB support for OpenEmbedded', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/project/lsb/lsb_release/1.4/lsb-release-1.4.tar.gz', 'Yi Zhao <yi.zhao@windriver.com>', 'None']
inserted (lsb,4.1,1.4,GPLv2+,console/utils,r2,None,http://prdownloads.sourceforge.net/lsb,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,LSB support for OpenEmbedded,N/A,http://downloads.sourceforge.net/project/lsb/lsb_release/1.4/lsb-release-1.4.tar.gz,Yi Zhao <yi.zhao@windriver.com>)
['libconvert-asn1-perl', '0.26', '0.26', 'Artistic-1.0 | GPL-1.0+', 'libs', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', 'Convert::ASN1 - ASN.1 Encode/Decode library', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/G/GB/GBARR/Convert-ASN1-0.26.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (libconvert-asn1-perl,0.26,0.26,Artistic-1.0 | GPL-1.0+,libs,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,Convert::ASN1 - ASN.1 Encode/Decode library,N/A,http://search.cpan.org/CPAN/authors/id/G/GB/GBARR/Convert-ASN1-0.26.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['opensp', '1.5.2', '1.5.2', 'BSD', 'libs', 'http://openjade.sourceforge.net', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'An SGML parser used by the OpenJade suite of utilities.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/openjade/OpenSP-1.5.2.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (opensp,1.5.2,1.5.2,BSD,libs,r1,None,http://openjade.sourceforge.net,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,An SGML parser used by the OpenJade suite of utilities.,N/A,http://downloads.sourceforge.net/openjade/OpenSP-1.5.2.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['acpid', '1.0.10', '1.0.10', 'GPLv2+', 'base', 'http://sourceforge.net/projects/acpid/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native', 'http://sourceforge.net/tracker/?group_id=33140&atid=407341', 'None', 'A daemon for delivering ACPI events.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/acpid/acpid-1.0.10.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (acpid,1.0.10,1.0.10,GPLv2+,base,r0,None,http://sourceforge.net/projects/acpid/,http://sourceforge.net/tracker/?group_id=33140&atid=407341,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native,A daemon for delivering ACPI events.,N/A,http://downloads.sourceforge.net/acpid/acpid-1.0.10.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['kbd', '1.15.2', '1.15.2', 'GPLv2+', 'base', 'unknown', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'This package contains keytable files and keyboard utilities', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/utils/kbd/kbd-1.15.2.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (kbd,1.15.2,1.15.2,GPLv2+,base,r4,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,This package contains keytable files and keyboard utilities,N/A,http://kernel.org/pub/linux/utils/kbd/kbd-1.15.2.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['kexec-tools', '2.0.4', '2.0.4', 'GPLv2', 'kernel/userland', 'http://kernel.org/pub/linux/utils/kernel/kexec/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib xz', 'None', 'None', 'Kexec is a fast reboot feature that lets you reboot to a new Linux kernel', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools-2.0.4.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (kexec-tools,2.0.4,2.0.4,GPLv2,kernel/userland,r0,None,http://kernel.org/pub/linux/utils/kernel/kexec/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib xz,Kexec is a fast reboot feature that lets you reboot to a new Linux kernel,N/A,http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools-2.0.4.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['tcl', '8.6.0', '8.6.0', 'BSD-3-Clause', 'devel/tcltk', 'http://tcl.sourceforge.net', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc tcl-native', 'None', 'None', 'Tool Command Language', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/tcl/tcl8.6.0-src.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (tcl,8.6.0,8.6.0,BSD-3-Clause,devel/tcltk,r0,None,http://tcl.sourceforge.net,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc tcl-native,Tool Command Language,N/A,http://downloads.sourceforge.net/tcl/tcl8.6.0-src.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['opkg-utils', '0.1.8+gitAUTOINC+757a1664a4', '0.1.8+gitAUTOINC+757a166', 'GPLv2+', 'base', 'http://wiki.openmoko.org/wiki/Opkg', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'OPKG Package Manager Utilities', 'MATCH', 'N/A', 'git://git.yoctoproject.org/opkg-utils;protocol=git', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (opkg-utils,0.1.8+gitAUTOINC+757a1664a4,0.1.8+gitAUTOINC+757a166,GPLv2+,base,r0,None,http://wiki.openmoko.org/wiki/Opkg,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,OPKG Package Manager Utilities,N/A,git://git.yoctoproject.org/opkg-utils;protocol=git,Radu Moisan <radu.moisan@intel.com>)
['libxdmcp', '1.1.1', '1.1.1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host. An X terminal (screen, keyboard, mouse, processor, network interface) is a prime example of an autonomous display.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXdmcp-1.1.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxdmcp,1.1.1,1.1.1,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto,The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host. An X terminal (screen, keyboard, mouse, processor, network interface) is a prime example of an autonomous display.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXdmcp-1.1.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['tiny-init', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Basic init system for poky-tiny', 'MATCH', 'N/A', 'file://init', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (tiny-init,1.0,INVALID,MIT,base,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Basic init system for poky-tiny,N/A,file://init,Saul Wold <sgw@linux.intel.com>)
['matchbox-session-sato', '0.1', 'INVALID', 'GPLv2.0+', 'x11', 'http://www.matchbox-project.org/', 'r30', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf-native', 'http://bugzilla.openedhand.com/', 'None', 'Custom MB session files for poky', 'MATCH', 'N/A', 'file://session', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (matchbox-session-sato,0.1,INVALID,GPLv2.0+,x11,r30,None,http://www.matchbox-project.org/,http://bugzilla.openedhand.com/,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf-native,Custom MB session files for poky,N/A,file://session,Constantin Musca <constantinx.musca@intel.com>)
['mesa-demos', '8.1.0', '8.1.0', 'MIT & PD', 'x11', 'http://mesa3d.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl glew freetype virtual/libgl libdrm virtual/egl virtual/libx11 virtual/libgles2 virtual/libgles1', 'https://bugs.freedesktop.org', 'None', 'This package includes the demonstration application, such as glxgears. These applications can be used for Mesa validation and benchmarking.', 'MATCH', 'N/A', 'ftp://ftp.freedesktop.org/pub/mesa/demos/8.1.0/mesa-demos-8.1.0.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (mesa-demos,8.1.0,8.1.0,MIT & PD,x11,r0,None,http://mesa3d.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl glew freetype virtual/libgl libdrm virtual/egl virtual/libx11 virtual/libgles2 virtual/libgles1,This package includes the demonstration application, such as glxgears. These applications can be used for Mesa validation and benchmarking.,N/A,ftp://ftp.freedesktop.org/pub/mesa/demos/8.1.0/mesa-demos-8.1.0.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['libsoup-2.4', '2.42.1', '2.43.4', 'LGPLv2', 'x11/gnome/libs', 'http://www.gnome.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnutls libxml2 libproxy sqlite3', 'https://bugzilla.gnome.org/', 'None', 'An HTTP library implementation in C', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/libsoup/2.42/libsoup-2.42.1.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libsoup-2.4,2.42.1,2.43.4,LGPLv2,x11/gnome/libs,r0,None,http://www.gnome.org/,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnutls libxml2 libproxy sqlite3,An HTTP library implementation in C,N/A,http://ftp.gnome.org/pub/GNOME/sources/libsoup/2.42/libsoup-2.42.1.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['gdk-pixbuf', '2.28.1', '2.29.2', 'LGPLv2', 'libs', 'http://www.gtk.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libpng glib-2.0 jpeg qemu-native', 'https://bugzilla.gnome.org/', 'None', 'Image loading library for GTK+', 'UPDATE', '2.27.2', 'http://ftp.gnome.org/pub/GNOME/sources/gdk-pixbuf/2.28/gdk-pixbuf-2.28.1.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', '2.27.2 is unstable']
inserted (gdk-pixbuf,2.28.1,2.29.2,LGPLv2,libs,r0,None,http://www.gtk.org/,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libpng glib-2.0 jpeg qemu-native,Image loading library for GTK+,2.27.2,http://ftp.gnome.org/pub/GNOME/sources/gdk-pixbuf/2.28/gdk-pixbuf-2.28.1.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['consolekit', '0.4.5', '0.4.6', 'GPLv2+', 'base', 'http://www.freedesktop.org/wiki/Software/ConsoleKit', 'r10', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus dbus-glib virtual/libx11', 'https://bugs.freedesktop.org/buglist.cgi?query_format=specific&product=ConsoleKit', 'None', 'ConsoleKit is a framework for defining and tracking users, login sessions, and seats.', 'UPDATE', 'N/A', 'http://www.freedesktop.org/software/ConsoleKit/dist/ConsoleKit-0.4.5.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (consolekit,0.4.5,0.4.6,GPLv2+,base,r10,None,http://www.freedesktop.org/wiki/Software/ConsoleKit,https://bugs.freedesktop.org/buglist.cgi?query_format=specific&product=ConsoleKit,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus dbus-glib virtual/libx11,ConsoleKit is a framework for defining and tracking users, login sessions, and seats.,N/A,http://www.freedesktop.org/software/ConsoleKit/dist/ConsoleKit-0.4.5.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['tiff', '4.0.3', '4.0.3', 'BSD-2-Clause', 'base', 'http://www.remotesensing.org/libtiff/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib jpeg xz', 'None', 'None', 'This software provides support for the Tag Image File Format (TIFF)', 'MATCH', 'N/A', 'ftp://ftp.remotesensing.org/pub/libtiff/tiff-4.0.3.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (tiff,4.0.3,4.0.3,BSD-2-Clause,base,r0,None,http://www.remotesensing.org/libtiff/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib jpeg xz,This software provides support for the Tag Image File Format (TIFF),N/A,ftp://ftp.remotesensing.org/pub/libtiff/tiff-4.0.3.tar.gz,Saul Wold <sgw@linux.intel.com>)
['glew', '1.9.0', '1.10.0', 'MIT', 'x11', 'http://glew.sourceforge.net/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 virtual/libgl libglu libxext libxi libxmu', 'http://sourceforge.net/tracker/?group_id=67586', 'None', 'The OpenGL Extension Wrangler Library (GLEW) is a cross-platform open-source C/C++ extension loading library.', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/project/glew/glew/1.9.0/glew-1.9.0.tgz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (glew,1.9.0,1.10.0,MIT,x11,r1,None,http://glew.sourceforge.net/,http://sourceforge.net/tracker/?group_id=67586,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 virtual/libgl libglu libxext libxi libxmu,The OpenGL Extension Wrangler Library (GLEW) is a cross-platform open-source C/C++ extension loading library.,N/A,http://downloads.sourceforge.net/project/glew/glew/1.9.0/glew-1.9.0.tgz,Saul Wold <sgw@linux.intel.com>)
['pixman', '0.30.0', '0.30.0', 'MIT & MIT-style & PD', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros zlib libpng', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'Pixman provides a library for manipulating pixel regions -- a set of Y-X banded rectangles, image compositing using the Porter/Duff model and implicit mask generation for geometric primitives including trapezoids, triangles, and rectangles.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/pixman-0.30.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (pixman,0.30.0,0.30.0,MIT & MIT-style & PD,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros zlib libpng,Pixman provides a library for manipulating pixel regions -- a set of Y-X banded rectangles, image compositing using the Porter/Duff model and implicit mask generation for geometric primitives including trapezoids, triangles, and rectangles.,N/A,http://xorg.freedesktop.org/releases/individual/lib/pixman-0.30.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['flex', '2.5.35', '2.5.37', 'BSD', 'devel', 'http://sourceforge.net/projects/flex/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Flex is a fast lexical analyser generator. Flex is a tool for generating programs that recognize lexical patterns in text.', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/flex/flex-2.5.35.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (flex,2.5.35,2.5.37,BSD,devel,r3,None,http://sourceforge.net/projects/flex/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Flex is a fast lexical analyser generator. Flex is a tool for generating programs that recognize lexical patterns in text.,N/A,http://downloads.sourceforge.net/flex/flex-2.5.35.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['squashfs-tools', '4.2', '4.2', 'GPL-2 & PD', 'base', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr zlib xz', 'None', 'None', 'Tools to manipulate Squashfs filesystems.', 'MATCH', '4.2', 'http://downloads.sourceforge.net/squashfs/squashfs4.2.tar.gz;name=squashfs', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (squashfs-tools,4.2,4.2,GPL-2 & PD,base,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr zlib xz,Tools to manipulate Squashfs filesystems.,4.2,http://downloads.sourceforge.net/squashfs/squashfs4.2.tar.gz;name=squashfs,Radu Moisan <radu.moisan@intel.com>)
['xf86-input-keyboard', '1.7.0', '1.7.0', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ', 'https://bugs.freedesktop.org', '2', "keyboard is an Xorg input driver for keyboards. The driver supports the standard OS-provided keyboard interface. The driver functions as a keyboard input device, and may be used as the X server's core keyboard.", 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-input-keyboard-1.7.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-input-keyboard,1.7.0,1.7.0,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ,keyboard is an Xorg input driver for keyboards. The driver supports the standard OS-provided keyboard interface. The driver functions as a keyboard input device, and may be used as the X server's core keyboard.,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-input-keyboard-1.7.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['python', '2.7.3', '3.3.2', 'PSFv2', 'devel/python', 'http://www.python.org', 'r0.3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native bzip2 db gdbm openssl readline sqlite3 zlib python-native ', 'None', 'None', 'The Python Programming Language', 'UPDATE', 'N/A', 'http://www.python.org/ftp/python/2.7.3/Python-2.7.3.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python,2.7.3,3.3.2,PSFv2,devel/python,r0.3,None,http://www.python.org,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native bzip2 db gdbm openssl readline sqlite3 zlib python-native ,The Python Programming Language,N/A,http://www.python.org/ftp/python/2.7.3/Python-2.7.3.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libidn', '1.28', '1.28', '(LGPLv2.1+ | LGPLv3) & GPLv3+', 'libs', 'http://www.gnu.org/software/libidn/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native pkgconfig-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Implementation of the Stringprep, Punycode and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/libidn/libidn-1.28.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libidn,1.28,1.28,(LGPLv2.1+ | LGPLv3) & GPLv3+,libs,r0,None,http://www.gnu.org/software/libidn/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native pkgconfig-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Implementation of the Stringprep, Punycode and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group.,N/A,ftp://ftp.gnu.org/gnu/libidn/libidn-1.28.tar.gz,Saul Wold <sgw@linux.intel.com>)
['blktrace', '1.0.5+gitAUTOINC+d6918c8832', '1.0.5+gitAUTOINC+cd0ae0f', 'GPLv2', 'base', 'unknown', 'r6', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libaio', 'None', 'None', 'blktrace - generate traces of the I/O traffic on block devices', 'UPDATE', 'N/A', 'git://git.kernel.dk/blktrace.git;protocol=git', 'Tom Zanussi <tom.zanussi@intel.com>', 'None']
inserted (blktrace,1.0.5+gitAUTOINC+d6918c8832,1.0.5+gitAUTOINC+cd0ae0f,GPLv2,base,r6,None,unknown,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libaio,blktrace - generate traces of the I/O traffic on block devices,N/A,git://git.kernel.dk/blktrace.git;protocol=git,Tom Zanussi <tom.zanussi@intel.com>)
['damageproto', '1.2.1', '1.2.1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the DAMAGE extension. The DAMAGE extension allows applications to receive information about changes made to pixel contents of windows and pixmaps.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/damageproto-1.2.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (damageproto,1.2.1,1.2.1,MIT-style,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the DAMAGE extension. The DAMAGE extension allows applications to receive information about changes made to pixel contents of windows and pixmaps.,N/A,http://xorg.freedesktop.org/releases/individual/proto/damageproto-1.2.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['gnome-mime-data', '2.18.0', '2.18.0', 'GPLv2 & GPLv2+', 'base', 'http://www.gnome.org/', 'r4', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info shared-mime-info intltool-native', 'https://bugzilla.gnome.org/', 'None', 'Base MIME and Application database for GNOME', 'MATCH', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/gnome-mime-data/2.18/gnome-mime-data-2.18.0.tar.bz2;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gnome-mime-data,2.18.0,2.18.0,GPLv2 & GPLv2+,base,r4,None,http://www.gnome.org/,https://bugzilla.gnome.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info shared-mime-info intltool-native,Base MIME and Application database for GNOME,N/A,http://ftp.gnome.org/pub/GNOME/sources/gnome-mime-data/2.18/gnome-mime-data-2.18.0.tar.bz2;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['lzo', '2.06', '2.06', 'GPLv2+', 'libs', 'http://www.oberhumer.com/opensource/lzo/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Lossless data compression library', 'MATCH', 'N/A', 'http://www.oberhumer.com/opensource/lzo/download/lzo-2.06.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (lzo,2.06,2.06,GPLv2+,libs,r1,None,http://www.oberhumer.com/opensource/lzo/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Lossless data compression library,N/A,http://www.oberhumer.com/opensource/lzo/download/lzo-2.06.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['gcc-cross', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native virtual/i586-poky-linux-binutils virtual/i586-poky-linux-libc-for-gcc linux-libc-headers mpfr-native gmp-native libmpc-native zlib-native', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc-cross,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native virtual/i586-poky-linux-binutils virtual/i586-poky-linux-libc-for-gcc linux-libc-headers mpfr-native gmp-native libmpc-native zlib-native,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['ppp-dialin', '0.1', 'INVALID', 'MIT', 'console/network', 'unknown', 'r8', ' ppp base-passwd shadow-native shadow-sysroot shadow', 'None', 'None', 'Enables PPP dial-in through a serial connection', 'MATCH', 'check', 'file://host-peer', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (ppp-dialin,0.1,INVALID,MIT,console/network,r8,None,unknown,None,MATCH, ppp base-passwd shadow-native shadow-sysroot shadow,Enables PPP dial-in through a serial connection,check,file://host-peer,Cristian Iorga <cristian.iorga@intel.com>)
['pango', '1.32.5', '1.35.0', 'LGPLv2.0+', 'libs', 'http://www.pango.org/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 fontconfig freetype zlib virtual/libiconv cairo harfbuzz gnome-common-native gtk-doc-stub-native virtual/libx11 libxft', 'http://bugzilla.gnome.org', 'None', 'Pango is a library for laying out and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed, though most of the work on Pango so far has been done in the context of the GTK+ widget toolkit. Pango forms the core of text and font handling for GTK+-2.x.', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/pango/1.32/pango-1.32.5.tar.xz;name=archive', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (pango,1.32.5,1.35.0,LGPLv2.0+,libs,r2,None,http://www.pango.org/,http://bugzilla.gnome.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 fontconfig freetype zlib virtual/libiconv cairo harfbuzz gnome-common-native gtk-doc-stub-native virtual/libx11 libxft,Pango is a library for laying out and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed, though most of the work on Pango so far has been done in the context of the GTK+ widget toolkit. Pango forms the core of text and font handling for GTK+-2.x.,N/A,http://ftp.gnome.org/pub/GNOME/sources/pango/1.32/pango-1.32.5.tar.xz;name=archive,Radu Moisan <radu.moisan@intel.com>)
['qt4-x11-free', '4.8.5', '4.8.5', 'LGPLv2.1 | GPLv3', 'x11/libs', 'http://qt-project.org/', 'r0', 'qt4-tools-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qt4-tools-native freetype jpeg libpng zlib dbus openssl glib-2.0 gstreamer gst-plugins-base sqlite3 tiff pulseaudio virtual/libgl virtual/libx11 fontconfig libxft libxext libxrender libxrandr libxcursor', 'None', 'None', 'Qt is a versatile cross-platform application framework -- this is the X11 version.', 'MATCH', 'N/A', 'http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt4-x11-free,4.8.5,4.8.5,LGPLv2.1 | GPLv3,x11/libs,r0,None,http://qt-project.org/,None,MATCH,qt4-tools-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qt4-tools-native freetype jpeg libpng zlib dbus openssl glib-2.0 gstreamer gst-plugins-base sqlite3 tiff pulseaudio virtual/libgl virtual/libx11 fontconfig libxft libxext libxrender libxrandr libxcursor,Qt is a versatile cross-platform application framework -- this is the X11 version.,N/A,http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['aspell', '0.60.6.1', '0.60.6.1', 'LGPLv2 | LGPLv2.1', 'console/utils', 'unknown', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'GNU Aspell spell-checker', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/aspell/aspell-0.60.6.1.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (aspell,0.60.6.1,0.60.6.1,LGPLv2 | LGPLv2.1,console/utils,r1,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,GNU Aspell spell-checker,N/A,ftp://ftp.gnu.org/gnu/aspell/aspell-0.60.6.1.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['nfs-export-root', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Enables NFS access from any host to the entire filesystem (for development purposes)', 'MATCH', 'N/A', 'file://exports', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (nfs-export-root,1.0,INVALID,MIT,base,r1,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Enables NFS access from any host to the entire filesystem (for development purposes),N/A,file://exports,Saul Wold <sgw@linux.intel.com>)
['nspr', '4.10', '4.10', 'GPL-2.0 | MPL-2.0 | LGPL-2.1', 'libs/network', 'http://www.mozilla.org/projects/nspr/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Netscape Portable Runtime Library', 'MATCH', 'N/A', 'ftp://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.10/src/nspr-4.10.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (nspr,4.10,4.10,GPL-2.0 | MPL-2.0 | LGPL-2.1,libs/network,r0,None,http://www.mozilla.org/projects/nspr/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Netscape Portable Runtime Library,N/A,ftp://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.10/src/nspr-4.10.tar.gz,Saul Wold <sgw@linux.intel.com>)
['dbus', '1.6.10', '1.7.4', 'AFL-2 | GPLv2+', 'base', 'http://dbus.freedesktop.org', 'r6.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat virtual/libintl virtual/libx11 libsm base-passwd shadow-native shadow-sysroot shadow update-rc.d-native', 'None', 'None', 'D-Bus is a message bus system, a simple way for applications to talk to one another. In addition to interprocess communication, D-Bus helps coordinate process lifecycle; it makes it simple and reliable to code a \\"single instance\\" application or daemon, and to launch applications and daemons on demand when their services are needed.', 'UPDATE', 'N/A', 'http://dbus.freedesktop.org/releases/dbus/dbus-1.6.10.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'D-BUS 1.7.x is the development version, not stable.']
inserted (dbus,1.6.10,1.7.4,AFL-2 | GPLv2+,base,r6.0,None,http://dbus.freedesktop.org,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat virtual/libintl virtual/libx11 libsm base-passwd shadow-native shadow-sysroot shadow update-rc.d-native,D-Bus is a message bus system, a simple way for applications to talk to one another. In addition to interprocess communication, D-Bus helps coordinate process lifecycle; it makes it simple and reliable to code a \"single instance\" application or daemon, and to launch applications and daemons on demand when their services are needed.,N/A,http://dbus.freedesktop.org/releases/dbus/dbus-1.6.10.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['keymaps', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r20', ' update-rc.d-native', 'None', 'None', 'Keymaps and initscript to set the keymap on bootup.', 'MATCH', '1.0', 'file://keymap.sh', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (keymaps,1.0,INVALID,GPLv2,base,r20,None,unknown,None,MATCH, update-rc.d-native,Keymaps and initscript to set the keymap on bootup.,1.0,file://keymap.sh,Radu Moisan <radu.moisan@intel.com>)
['docbook-utils-native', '0.6.14', '0.6.14', 'GPLv2', 'console/utils', 'http://sources.redhat.com/docbook-tools/', 'r3', 'autoconf-native automake-native libtool-native gnu-config-native openjade-native sgmlspl-native docbook-dsssl-stylesheets-native docbook-sgml-dtd-3.1-native', 'None', 'None', 'A collection of all the free software tools you need to work on and format DocBook documents.', 'MATCH', 'N/A', 'ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-0.6.14.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (docbook-utils-native,0.6.14,0.6.14,GPLv2,console/utils,r3,None,http://sources.redhat.com/docbook-tools/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native openjade-native sgmlspl-native docbook-dsssl-stylesheets-native docbook-sgml-dtd-3.1-native,A collection of all the free software tools you need to work on and format DocBook documents.,N/A,ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-0.6.14.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['xdpyinfo', '1.3.1', '1.3.1', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxtst libxext libxxf86vm libxxf86dga libxxf86misc libxi libxrender libxinerama libdmx libxau', 'https://bugs.freedesktop.org', '1', 'Xdpyinfo is a utility for displaying information about an X server. It is used to examine the capabilities of a server, the predefined values for various parameters used in communicating between clients and the server, and the different types of screens and visuals that are available.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xdpyinfo-1.3.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xdpyinfo,1.3.1,1.3.1,MIT-X,x11/apps,r0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxtst libxext libxxf86vm libxxf86dga libxxf86misc libxi libxrender libxinerama libdmx libxau,Xdpyinfo is a utility for displaying information about an X server. It is used to examine the capabilities of a server, the predefined values for various parameters used in communicating between clients and the server, and the different types of screens and visuals that are available.,N/A,http://xorg.freedesktop.org/releases/individual/app/xdpyinfo-1.3.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['udev-extraconf', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r8', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Extra machine specific configuration files for udev, specifically blacklist information.', 'MATCH', 'N/A', 'file://automount.rules', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (udev-extraconf,1.0,INVALID,MIT,base,r8,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Extra machine specific configuration files for udev, specifically blacklist information.,N/A,file://automount.rules,Radu Moisan <radu.moisan@intel.com>)
['alsa-utils-alsaconf', '1.0.26', '1.0.27.2', 'GPLv2+', 'console/utils', 'http://www.alsa-project.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc alsa-lib ncurses libsamplerate0 udev', 'https://bugtrack.alsa-project.org/alsa-bug/login_page.php', 'None', 'ALSA Utilities', 'UPDATE', 'N/A', 'ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.26.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (alsa-utils-alsaconf,1.0.26,1.0.27.2,GPLv2+,console/utils,r0,None,http://www.alsa-project.org,https://bugtrack.alsa-project.org/alsa-bug/login_page.php,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc alsa-lib ncurses libsamplerate0 udev,ALSA Utilities,N/A,ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.26.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['opkg', '0.1.8+svnr649', '0.1.8+svnr650', 'GPLv2+', 'base', 'http://code.google.com/p/opkg/', 'r13.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://code.google.com/p/opkg/issues/list', '1', 'Open Package Manager', 'UPDATE', '0.1.8', 'svn://opkg.googlecode.com/svn;module=trunk;protocol=http', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (opkg,0.1.8+svnr649,0.1.8+svnr650,GPLv2+,base,r13.0,1,http://code.google.com/p/opkg/,http://code.google.com/p/opkg/issues/list,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Open Package Manager,0.1.8,svn://opkg.googlecode.com/svn;module=trunk;protocol=http,Radu Moisan <radu.moisan@intel.com>)
['libsm', '1.2.1', '1.2.1', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libice xproto xtrans e2fsprogs', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The Session Management Library (SMlib) is a low-level \\"C\\" language interface to XSMP. The purpose of the X Session Management Protocol (XSMP) is to provide a uniform mechanism for users to save and restore their sessions. A session is a group of clients, each of which has a particular state.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libSM-1.2.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libsm,1.2.1,1.2.1,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libice xproto xtrans e2fsprogs,The Session Management Library (SMlib) is a low-level \"C\" language interface to XSMP. The purpose of the X Session Management Protocol (XSMP) is to provide a uniform mechanism for users to save and restore their sessions. A session is a group of clients, each of which has a particular state.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libSM-1.2.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['ttf-bitstream-vera', '1.10', '1.10', 'BitstreamVera', 'x11/fonts', 'unknown', 'r7', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native', 'None', 'None', 'The Bitstream Vera fonts include four monospace and sans faces (normal, oblique, bold, bold oblique) and two serif faces (normal and bold). In addition Fontconfig/Xft2 can artificially oblique the serif faces for you: this loses hinting and distorts the faces slightly, but is visibly different than normal and bold, and reasonably pleasing.', 'MATCH', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/ttf-bitstream-vera/1.10/ttf-bitstream-vera-1.10.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (ttf-bitstream-vera,1.10,1.10,BitstreamVera,x11/fonts,r7,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native,The Bitstream Vera fonts include four monospace and sans faces (normal, oblique, bold, bold oblique) and two serif faces (normal and bold). In addition Fontconfig/Xft2 can artificially oblique the serif faces for you: this loses hinting and distorts the faces slightly, but is visibly different than normal and bold, and reasonably pleasing.,N/A,http://ftp.gnome.org/pub/GNOME/sources/ttf-bitstream-vera/1.10/ttf-bitstream-vera-1.10.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['augeas', '1.1.0', '1.1.0', 'LGPLv2.1+', 'base', 'http://augeas.net/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc readline libxml2', 'https://fedorahosted.org/augeas/report/1', 'None', 'Augeas configuration API', 'MATCH', 'N/A', 'http://download.augeas.net/augeas-1.1.0.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (augeas,1.1.0,1.1.0,LGPLv2.1+,base,r1,None,http://augeas.net/,https://fedorahosted.org/augeas/report/1,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc readline libxml2,Augeas configuration API,N/A,http://download.augeas.net/augeas-1.1.0.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['ed', '1.8', '1.9', 'GPLv3+', 'base', 'http://www.gnu.org/software/ed/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', '', 'None', 'a line-oriented text editor', 'UPDATE', 'N/A', 'ftp://ftp.gnu.org/gnu/ed/ed-1.8.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (ed,1.8,1.9,GPLv3+,base,r0,None,http://www.gnu.org/software/ed/,,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,a line-oriented text editor,N/A,ftp://ftp.gnu.org/gnu/ed/ed-1.8.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['u-boot-fw-utils', '2011.06', '2013.07', 'GPLv2+', 'bootloader', 'unknown', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc mtd-utils', 'None', 'None', 'U-boot bootloader fw_printenv/setenv utils', 'UPDATE', 'N/A', 'ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (u-boot-fw-utils,2011.06,2013.07,GPLv2+,bootloader,r1,None,unknown,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc mtd-utils,U-boot bootloader fw_printenv/setenv utils,N/A,ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['gdb', '7.6', '7.6', 'GPLv2 & GPLv3 & LGPLv2 & LGPLv3', 'devel', 'http://www.gnu.org/software/gdb/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat ncurses readline lttng-ust', 'None', 'None', 'gdb - GNU debugger', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gdb/gdb-7.6.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gdb,7.6,7.6,GPLv2 & GPLv3 & LGPLv2 & LGPLv3,devel,r0,None,http://www.gnu.org/software/gdb/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat ncurses readline lttng-ust,gdb - GNU debugger,N/A,ftp://ftp.gnu.org/gnu/gdb/gdb-7.6.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libgcc', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-g++', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libgcc,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-g++,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['encodings', '1.0.4', '1.0.4', 'PD', 'x11/fonts', 'http://www.x.org', 'r2.1', 'pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native mkfontscale-native font-util-native', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The encodings that map to specific characters for a number of Xorg and common fonts.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/font/encodings-1.0.4.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (encodings,1.0.4,1.0.4,PD,x11/fonts,r2.1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native mkfontscale-native font-util-native,The encodings that map to specific characters for a number of Xorg and common fonts.,N/A,http://xorg.freedesktop.org/releases/individual/font/encodings-1.0.4.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['linux-libc-headers', '3.8', '3.10.2', 'GPLv2', 'devel', 'unknown', 'r0', ' unifdef-native', 'None', 'None', "Sanitized set of kernel headers for the C library's use.", 'UPDATE', 'N/A', 'http://kernel.org/pub/linux/kernel/v3.0/linux-3.8.tar.bz2', 'Bruce Ashfield <bruce.ashfield@windriver.com>', 'None']
inserted (linux-libc-headers,3.8,3.10.2,GPLv2,devel,r0,None,unknown,None,UPDATE, unifdef-native,Sanitized set of kernel headers for the C library's use.,N/A,http://kernel.org/pub/linux/kernel/v3.0/linux-3.8.tar.bz2,Bruce Ashfield <bruce.ashfield@windriver.com>)
['gst-plugins-good', '0.10.31', '1.1.2', 'GPLv2+ & LGPLv2.1+', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r8', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base gconf cairo jpeg libpng zlib libid3tag flac speex libsoup-2.4 gconf gconf-native pulseaudio', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-0.10.31.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'not compatible with gst-fluendo 0.10.x']
inserted (gst-plugins-good,0.10.31,1.1.2,GPLv2+ & LGPLv2.1+,multimedia,r8,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base gconf cairo jpeg libpng zlib libid3tag flac speex libsoup-2.4 gconf gconf-native pulseaudio,Plugins for GStreamer,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-0.10.31.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['insserv', '1.14.0', '1.14.0', 'GPLv2', 'base', 'unknown', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', "This utility reorders the init.d boot scripts based on dependencies given in scripts' LSB comment headers, or in override files included in this package or added in /etc/insserv.", 'MATCH', 'N/A', 'ftp://ftp.suse.com/pub/projects/init/insserv-1.14.0.tar.bz2', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (insserv,1.14.0,1.14.0,GPLv2,base,r1,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,This utility reorders the init.d boot scripts based on dependencies given in scripts' LSB comment headers, or in override files included in this package or added in /etc/insserv.,N/A,ftp://ftp.suse.com/pub/projects/init/insserv-1.14.0.tar.bz2,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['mkfontscale', '1.1.0', '1.1.1', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 zlib libfontenc freetype virtual/libx11', 'https://bugs.freedesktop.org', 'None', 'For each directory argument, mkfontscale reads all of the scalable font files in the directory. For every font file found, an X11 font name (XLFD) is generated, and is written together with the file name to a file fonts.scale in the directory. The resulting fonts.scale is used by the mkfontdir program.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/mkfontscale-1.1.0.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (mkfontscale,1.1.0,1.1.1,MIT-X,x11/apps,r8.0,None,http://www.x.org/,https://bugs.freedesktop.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 zlib libfontenc freetype virtual/libx11,For each directory argument, mkfontscale reads all of the scalable font files in the directory. For every font file found, an X11 font name (XLFD) is generated, and is written together with the file name to a file fonts.scale in the directory. The resulting fonts.scale is used by the mkfontdir program.,N/A,http://xorg.freedesktop.org/releases/individual/app/mkfontscale-1.1.0.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['connman', '1.15', '1.16', 'GPLv2', 'base', 'http://connman.net/', 'r20.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 ppp iptables gtk-doc-stub-native update-rc.d-native wpa-supplicant bluez4 gnutls ofono', 'http://bugs.meego.com/buglist.cgi?quicksearch=connman', 'None', 'The ConnMan project provides a daemon for managing internet connections within embedded devices running the Linux operating system. The Connection Manager is designed to be slim and to use as few resources as possible, so it can be easily integrated. It is a fully modular system that can be extended, through plug-ins, to support all kinds of wired or wireless technologies. Also, configuration methods, like DHCP and domain name resolving, are implemented using plug-ins.', 'UPDATE', 'N/A', 'http://kernel.org/pub/linux/network/connman/connman-1.15.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (connman,1.15,1.16,GPLv2,base,r20.0,None,http://connman.net/,http://bugs.meego.com/buglist.cgi?quicksearch=connman,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 ppp iptables gtk-doc-stub-native update-rc.d-native wpa-supplicant bluez4 gnutls ofono,The ConnMan project provides a daemon for managing internet connections within embedded devices running the Linux operating system. The Connection Manager is designed to be slim and to use as few resources as possible, so it can be easily integrated. It is a fully modular system that can be extended, through plug-ins, to support all kinds of wired or wireless technologies. Also, configuration methods, like DHCP and domain name resolving, are implemented using plug-ins.,N/A,http://kernel.org/pub/linux/network/connman/connman-1.15.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['libxml-sax-base-perl', '1.08', '1.08', 'Artistic-1.0 | GPL-1.0+', 'libs', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', "This module has a very simple task - to be a base class for PerlSAX drivers and filters. It's default behaviour is to pass the input directly to the output unchanged. It can be useful to use this module as a base class so you don't have to, for example, implement the characters() callback.", 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz', 'None', 'None']
inserted (libxml-sax-base-perl,1.08,1.08,Artistic-1.0 | GPL-1.0+,libs,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,This module has a very simple task - to be a base class for PerlSAX drivers and filters. It's default behaviour is to pass the input directly to the output unchanged. It can be useful to use this module as a base class so you don't have to, for example, implement the characters() callback.,N/A,http://search.cpan.org/CPAN/authors/id/G/GR/GRANTM/XML-SAX-Base-1.08.tar.gz,None)
['ccache', '3.1.8', '3.1.9', 'GPLv3+', 'devel', 'http://ccache.samba.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'ccache is a compiler cache. It speeds up recompilation by caching the result of previous compilations and detecting when the same compilation is being done again. Supported languages are C, C\\+\\+, Objective-C and Objective-C++.', 'UPDATE', 'N/A', 'http://samba.org/ftp/ccache/ccache-3.1.8.tar.xz', 'Wenzong Fan <wenzong.fan@windriver.com>', 'None']
inserted (ccache,3.1.8,3.1.9,GPLv3+,devel,r0,None,http://ccache.samba.org,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,ccache is a compiler cache. It speeds up recompilation by caching the result of previous compilations and detecting when the same compilation is being done again. Supported languages are C, C\+\+, Objective-C and Objective-C++.,N/A,http://samba.org/ftp/ccache/ccache-3.1.8.tar.xz,Wenzong Fan <wenzong.fan@windriver.com>)
['mpeg2dec', '0.4.1', '0.4.1', 'GPLv2+', 'libs', 'http://libmpeg2.sourceforge.net/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11', 'None', 'None', 'Library and test program for decoding mpeg-2 and mpeg-1 video streams', 'MATCH', 'N/A', 'http://libmpeg2.sourceforge.net/files/mpeg2dec-0.4.1.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'Why are we currently at 0.4.1?']
inserted (mpeg2dec,0.4.1,0.4.1,GPLv2+,libs,r2,None,http://libmpeg2.sourceforge.net/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11,Library and test program for decoding mpeg-2 and mpeg-1 video streams,N/A,http://libmpeg2.sourceforge.net/files/mpeg2dec-0.4.1.tar.gz,Saul Wold <sgw@linux.intel.com>)
['console-tools', '0.3.2', '0.3.2', 'GPLv2', 'base', 'unknown', 'r8', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'Provides tools that enable the set-up and manipulation of the linux console and console-font files.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/lct/console-tools-0.3.2.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (console-tools,0.3.2,0.3.2,GPLv2,base,r8,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,Provides tools that enable the set-up and manipulation of the linux console and console-font files.,N/A,http://downloads.sourceforge.net/lct/console-tools-0.3.2.tar.gz,Saul Wold <sgw@linux.intel.com>)
['xf86-video-omapfb', '0.1.1+gitrAUTOINC+28c006c94e', '0.1.1+gitrAUTOINC+28c006c94e+gitrAUTOINC+fatal: ', 'MIT-X & GPLv2+', 'x11/drivers', 'http://www.x.org', 'r21.7', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11', 'https://bugs.freedesktop.org', '2', 'omapfb driver supports the basic Texas Instruments OMAP framebuffer.', 'UPDATE', 'N/A', 'git://git.pingu.fi/xf86-video-omapfb;protocol=http', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-video-omapfb,0.1.1+gitrAUTOINC+28c006c94e,0.1.1+gitrAUTOINC+28c006c94e+gitrAUTOINC+fatal: ,MIT-X & GPLv2+,x11/drivers,r21.7,2,http://www.x.org,https://bugs.freedesktop.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros virtual/libx11,omapfb driver supports the basic Texas Instruments OMAP framebuffer.,N/A,git://git.pingu.fi/xf86-video-omapfb;protocol=http,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libi18n-collate-perl', '1.02', '1.02', 'Artistic-1.0 | GPL-1.0+', 'libs', 'http://search.cpan.org/~flora/I18N-Collate/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', 'This module provides you with objects that will collate according to your national character set, provided that the POSIX setlocale() function is supported on your system.', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/F/FL/FLORA/I18N-Collate-1.02.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libi18n-collate-perl,1.02,1.02,Artistic-1.0 | GPL-1.0+,libs,r0,None,http://search.cpan.org/~flora/I18N-Collate/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,This module provides you with objects that will collate according to your national character set, provided that the POSIX setlocale() function is supported on your system.,N/A,http://search.cpan.org/CPAN/authors/id/F/FL/FLORA/I18N-Collate-1.02.tar.gz,Saul Wold <sgw@linux.intel.com>)
['mtd-utils', '1.5.0', '1.5.0', 'GPLv2+', 'base', 'http://www.linux-mtd.infradead.org/', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib lzo e2fsprogs util-linux', 'None', 'None', 'Tools for managing memory technology devices.', 'ErrUnknown:git.infradead.org/mtd-utils.git', 'N/A', 'git://git.infradead.org/mtd-utils.git;protocol=git', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (mtd-utils,1.5.0,1.5.0,GPLv2+,base,r3,None,http://www.linux-mtd.infradead.org/,None,ErrUnknown:git.infradead.org/mtd-utils.git, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib lzo e2fsprogs util-linux,Tools for managing memory technology devices.,N/A,git://git.infradead.org/mtd-utils.git;protocol=git,Radu Moisan <radu.moisan@intel.com>)
['xinput', '1.6.0', '1.6.0', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxi libxrandr libxinerama', 'https://bugs.freedesktop.org', 'None', 'Xinput is an utility for configuring and testing XInput devices', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xinput-1.6.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xinput,1.6.0,1.6.0,MIT-X,x11/apps,r8.0,None,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxi libxrandr libxinerama,Xinput is an utility for configuring and testing XInput devices,N/A,http://xorg.freedesktop.org/releases/individual/app/xinput-1.6.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['v86d', '0.1.10', '0.1.10', 'GPLv2', 'base', 'http://dev.gentoo.org/~spock/projects/uvesafb/', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel update-rc.d-native', 'None', 'None', 'User support binary for the uvesafb kernel module', 'MATCH', 'N/A', 'http://distfiles.gentoo.org/distfiles/v86d-0.1.10.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (v86d,0.1.10,0.1.10,GPLv2,base,r1,None,http://dev.gentoo.org/~spock/projects/uvesafb/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel update-rc.d-native,User support binary for the uvesafb kernel module,N/A,http://distfiles.gentoo.org/distfiles/v86d-0.1.10.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['at-spi2-core', '2.8.0', '2.9.4', 'LGPLv2', 'base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 virtual/libx11 libxi libxtst gtk-doc-stub-native', 'None', 'None', 'Assistive Technology Service Provider Interface (dbus core)', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/at-spi2-core/2.8/at-spi2-core-2.8.0.tar.xz', 'None', 'None']
inserted (at-spi2-core,2.8.0,2.9.4,LGPLv2,base,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 virtual/libx11 libxi libxtst gtk-doc-stub-native,Assistive Technology Service Provider Interface (dbus core),N/A,http://ftp.gnome.org/pub/GNOME/sources/at-spi2-core/2.8/at-spi2-core-2.8.0.tar.xz,None)
['xcb-proto', '1.8', '1.8', 'MIT', 'x11/libs', 'http://xcb.freedesktop.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native ', 'https://bugs.freedesktop.org/enter_bug.cgi?product=XCB', 'None', 'Function prototypes for the X protocol C-language Binding (XCB). XCB is a replacement for Xlib featuring a small footprint, latency hiding, direct access to the protocol, improved threading support, and extensibility.', 'MATCH', 'N/A', 'http://xcb.freedesktop.org/dist/xcb-proto-1.8.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcb-proto,1.8,1.8,MIT,x11/libs,r0,None,http://xcb.freedesktop.org,https://bugs.freedesktop.org/enter_bug.cgi?product=XCB,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native ,Function prototypes for the X protocol C-language Binding (XCB). XCB is a replacement for Xlib featuring a small footprint, latency hiding, direct access to the protocol, improved threading support, and extensibility.,N/A,http://xcb.freedesktop.org/dist/xcb-proto-1.8.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['leafpad', '0.8.18.1', '0.8.18.1', 'GPLv2 & GPLv2+', 'base', 'http://tarot.freeshell.org/leafpad/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ intltool-native libowl', 'None', 'None', 'Simple GTK+ Text Editor', 'MATCH', 'N/A', 'http://savannah.nongnu.org/download/leafpad/leafpad-0.8.18.1.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (leafpad,0.8.18.1,0.8.18.1,GPLv2 & GPLv2+,base,r2,None,http://tarot.freeshell.org/leafpad/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ intltool-native libowl,Simple GTK+ Text Editor,N/A,http://savannah.nongnu.org/download/leafpad/leafpad-0.8.18.1.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['sbc', '1.1', '1.1', 'LGPLv2.1+', 'libs', 'https://www.bluez.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libsndfile1', 'None', 'None', 'Bluetooth low-complexity, subband codec (SBC) library.', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/bluetooth/sbc-1.1.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (sbc,1.1,1.1,LGPLv2.1+,libs,r0,None,https://www.bluez.org,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libsndfile1,Bluetooth low-complexity, subband codec (SBC) library.,N/A,http://kernel.org/pub/linux/bluetooth/sbc-1.1.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['gconf', '3.2.6', '3.2.6', 'LGPLv2+', 'x11/gnome', 'unknown', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus dbus-glib libxml2 intltool-native gobject-introspection-stub gnome-common-native gtk-doc-stub-native', 'None', 'None', 'GNOME configuration system', 'MATCH', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/GConf/3.2/GConf-3.2.6.tar.xz;name=archive', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (gconf,3.2.6,3.2.6,LGPLv2+,x11/gnome,r0,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus dbus-glib libxml2 intltool-native gobject-introspection-stub gnome-common-native gtk-doc-stub-native,GNOME configuration system,N/A,http://ftp.gnome.org/pub/GNOME/sources/GConf/3.2/GConf-3.2.6.tar.xz;name=archive,Saul Wold <sgw@linux.intel.com>)
['openjade-native', '1.3.2', '1.3.3', 'BSD', 'base', 'http://openjade.sourceforge.net', 'r5', 'autoconf-native automake-native libtool-native gnu-config-native opensp-native sgml-common-native', 'None', 'None', 'OpenJade is a suite of tools for validating, processing, and applying DSSSL (Document Style Semantics and Specification Language) stylesheets to SGML and XML documents.', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/openjade/openjade-1.3.2.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (openjade-native,1.3.2,1.3.3,BSD,base,r5,None,http://openjade.sourceforge.net,None,UPDATE,autoconf-native automake-native libtool-native gnu-config-native opensp-native sgml-common-native,OpenJade is a suite of tools for validating, processing, and applying DSSSL (Document Style Semantics and Specification Language) stylesheets to SGML and XML documents.,N/A,http://downloads.sourceforge.net/openjade/openjade-1.3.2.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['libxft', '2.3.1', '2.3.1', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 libxrender freetype fontconfig', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'Xft was designed to provide good support for scalable fonts, and to do so efficiently. Unlike the core fonts system, it supports features such as anti-aliasing and sub-pixel rasterisation. Perhaps more importantly, it gives applications full control over the way glyphs are rendered, making fine typesetting and WYSIWIG display possible. Finally, it allows applications to use fonts that are not installed system-wide for displaying documents with embedded fonts. Xft is not compatible with the core fonts system: usage of Xft requires fairly extensive changes to toolkits (user-interface libraries).', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXft-2.3.1.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxft,2.3.1,2.3.1,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros virtual/libx11 libxrender freetype fontconfig,Xft was designed to provide good support for scalable fonts, and to do so efficiently. Unlike the core fonts system, it supports features such as anti-aliasing and sub-pixel rasterisation. Perhaps more importantly, it gives applications full control over the way glyphs are rendered, making fine typesetting and WYSIWIG display possible. Finally, it allows applications to use fonts that are not installed system-wide for displaying documents with embedded fonts. Xft is not compatible with the core fonts system: usage of Xft requires fairly extensive changes to toolkits (user-interface libraries).,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXft-2.3.1.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['matchbox-wm', '1.2+gitAUTOINC+686178379e', '1.2+gitAUTOINC+6861783', 'GPLv2+', 'x11/wm', 'http://matchbox-project.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libmatchbox virtual/libx11 libxext libxrender startup-notification expat gconf', 'http://bugzilla.openedhand.com/', 'None', 'Matchbox window manager', 'MATCH', 'N/A', 'git://git.yoctoproject.org/matchbox-window-manager;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (matchbox-wm,1.2+gitAUTOINC+686178379e,1.2+gitAUTOINC+6861783,GPLv2+,x11/wm,r0,None,http://matchbox-project.org,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libmatchbox virtual/libx11 libxext libxrender startup-notification expat gconf,Matchbox window manager,N/A,git://git.yoctoproject.org/matchbox-window-manager;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['bash', '4.2', '4.2', 'GPLv3+', 'base/shell', 'http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html', 'r6', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses bison-native virtual/update-alternatives', 'None', 'None', 'An sh-compatible command language interpreter.', 'MATCH', '4.2', 'ftp://ftp.gnu.org/gnu/bash/bash-4.2.tar.gz;name=tarball', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (bash,4.2,4.2,GPLv3+,base/shell,r6,None,http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses bison-native virtual/update-alternatives,An sh-compatible command language interpreter.,4.2,ftp://ftp.gnu.org/gnu/bash/bash-4.2.tar.gz;name=tarball,Saul Wold <sgw@linux.intel.com>)
['ltp', '20130503', '20130503', 'GPLv2 & GPLv2+ & LGPLv2+ & LGPLv2.1+ & BSD-2-Clause', 'console/utils', 'http://ltp.sourceforge.net', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr libaio libcap', 'None', 'None', 'The Linux Test Project is a joint project with SGI, IBM, OSDL, and Bull with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. The Linux Test Project is a collection of tools for testing the Linux kernel and related features.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/ltp/ltp-full-20130503.bz2', 'Mihai Lindner <mihaix.lindner@linux.intel.com>', 'None']
inserted (ltp,20130503,20130503,GPLv2 & GPLv2+ & LGPLv2+ & LGPLv2.1+ & BSD-2-Clause,console/utils,r0,None,http://ltp.sourceforge.net,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr libaio libcap,The Linux Test Project is a joint project with SGI, IBM, OSDL, and Bull with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. The Linux Test Project is a collection of tools for testing the Linux kernel and related features.,N/A,http://downloads.sourceforge.net/ltp/ltp-full-20130503.bz2,Mihai Lindner <mihaix.lindner@linux.intel.com>)
['openssh', '6.2p2', '6.2p2', 'BSD', 'console/network', 'http://openssh.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib openssl base-passwd shadow-native shadow-sysroot shadow update-rc.d-native tcp-wrappers virtual/update-alternatives', 'None', 'None', 'Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine.', 'MATCH', 'N/A', 'ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-6.2p2.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (openssh,6.2p2,6.2p2,BSD,console/network,r0,None,http://openssh.org,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib openssl base-passwd shadow-native shadow-sysroot shadow update-rc.d-native tcp-wrappers virtual/update-alternatives,Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine.,N/A,ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-6.2p2.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['chrpath', '0.14', '0.14', 'GPLv2', 'base', 'http://alioth.debian.org/projects/chrpath/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://alioth.debian.org/tracker/?atid=412807&group_id=31052', 'None', "chrpath allows you to change the rpath (where the application looks for libraries) in an application. It does not (yet) allow you to add an rpath if there isn't one already.", 'MATCH', 'N/A', 'http://alioth.debian.org/frs/download.php/file/3648/chrpath-0.14.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (chrpath,0.14,0.14,GPLv2,base,r0,None,http://alioth.debian.org/projects/chrpath/,http://alioth.debian.org/tracker/?atid=412807&group_id=31052,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,chrpath allows you to change the rpath (where the application looks for libraries) in an application. It does not (yet) allow you to add an rpath if there isn't one already.,N/A,http://alioth.debian.org/frs/download.php/file/3648/chrpath-0.14.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['atk', '2.8.0', '2.9.3', 'GPLv2+ & LGPLv2+', 'x11/libs', 'http://live.gnome.org/GAP/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnome-common-native gtk-doc-stub-native', 'https://bugzilla.gnome.org/', 'None', 'An accessibility toolkit for GNOME.', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/atk/2.8/atk-2.8.0.tar.xz;name=archive', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (atk,2.8.0,2.9.3,GPLv2+ & LGPLv2+,x11/libs,r0,None,http://live.gnome.org/GAP/,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnome-common-native gtk-doc-stub-native,An accessibility toolkit for GNOME.,N/A,http://ftp.gnome.org/pub/GNOME/sources/atk/2.8/atk-2.8.0.tar.xz;name=archive,Radu Moisan <radu.moisan@intel.com>)
['matchbox-terminal', '0.0+gitAUTOINC+452bca2534', '0.0+gitAUTOINC+452bca2', 'GPLv2+', 'x11/utils', 'http://www.matchbox-project.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ vte', 'http://bugzilla.openedhand.com/', 'None', 'Matchbox Terminal', 'MATCH', 'N/A', 'git://git.yoctoproject.org/matchbox-terminal;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (matchbox-terminal,0.0+gitAUTOINC+452bca2534,0.0+gitAUTOINC+452bca2,GPLv2+,x11/utils,r0,None,http://www.matchbox-project.org/,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ vte,Matchbox Terminal,N/A,git://git.yoctoproject.org/matchbox-terminal;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['libarchive', '2.8.5', '3.1.2', 'BSD', 'devel', 'http://code.google.com/p/libarchive/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr', 'None', 'None', 'C library and command-line tools for reading and writing tar, cpio, zip, ISO, and other archive formats', 'UPDATE', 'N/A', 'http://libarchive.googlecode.com/files/libarchive-2.8.5.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (libarchive,2.8.5,3.1.2,BSD,devel,r0,None,http://code.google.com/p/libarchive/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr,C library and command-line tools for reading and writing tar, cpio, zip, ISO, and other archive formats,N/A,http://libarchive.googlecode.com/files/libarchive-2.8.5.tar.gz,Kai Kang <kai.kang@windriver.com>)
['xmodmap', '1.0.7', '1.0.7', 'MIT', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11', 'https://bugs.freedesktop.org', '1', "The xmodmap program is used to edit and display the keyboard modifier map and keymap table that are used by client applications to convert event keycodes into keysyms. It is usually run from the user's session startup script to configure the keyboard according to personal tastes.", 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xmodmap-1.0.7.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xmodmap,1.0.7,1.0.7,MIT,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11,The xmodmap program is used to edit and display the keyboard modifier map and keymap table that are used by client applications to convert event keycodes into keysyms. It is usually run from the user's session startup script to configure the keyboard according to personal tastes.,N/A,http://xorg.freedesktop.org/releases/individual/app/xmodmap-1.0.7.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['xf86-video-fbdev', '0.4.3', '0.4.3', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r21.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros', 'https://bugs.freedesktop.org', '2', 'X.Org X server -- fbdev display driver', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-video-fbdev-0.4.3.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-video-fbdev,0.4.3,0.4.3,MIT-X,x11/drivers,r21.0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros,X.Org X server -- fbdev display driver,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-video-fbdev-0.4.3.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['u-boot-mkimage', '2011.06', '2013.07', 'GPLv2+', 'bootloader', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'U-boot bootloader mkimage tool', 'UPDATE', 'N/A', 'ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (u-boot-mkimage,2011.06,2013.07,GPLv2+,bootloader,r0,None,unknown,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,U-boot bootloader mkimage tool,N/A,ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['psplash', '0.1+gitAUTOINC+afd4e228c6', '0.1+gitAUTOINC+afd4e22', 'GPLv2+', 'base', 'http://git.yoctoproject.org/cgit/cgit.cgi/psplash', 'r15', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native virtual/update-alternatives', 'None', 'None', "PSplash is a userspace graphical boot splash screen for mainly embedded Linux devices supporting a 16bpp or 32bpp framebuffer. It has few dependencies (just libc), supports basic images and text and handles rotation. Its visual look is configurable by basic source changes. Also included is a 'client' command utility for sending information to psplash such as boot progress information.", 'MATCH', 'N/A', 'git://git.yoctoproject.org/psplash;protocol=git', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (psplash,0.1+gitAUTOINC+afd4e228c6,0.1+gitAUTOINC+afd4e22,GPLv2+,base,r15,None,http://git.yoctoproject.org/cgit/cgit.cgi/psplash,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native virtual/update-alternatives,PSplash is a userspace graphical boot splash screen for mainly embedded Linux devices supporting a 16bpp or 32bpp framebuffer. It has few dependencies (just libc), supports basic images and text and handles rotation. Its visual look is configurable by basic source changes. Also included is a 'client' command utility for sending information to psplash such as boot progress information.,N/A,git://git.yoctoproject.org/psplash;protocol=git,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['xcmiscproto', '1.2.2', '1.2.2', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the XC-MISC extension, which is used to get details of XID allocations within the server.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-1.2.2.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcmiscproto,1.2.2,1.2.2,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the XC-MISC extension, which is used to get details of XID allocations within the server.,N/A,http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-1.2.2.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['harfbuzz', '0.9.17', '0.9.19', 'MIT & ICU', 'libs', 'http://www.freedesktop.org/wiki/Software/HarfBuzz', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icu glib-2.0 cairo freetype', 'https://bugs.freedesktop.org/enter_bug.cgi?product=HarfBuzz', 'None', 'HarfBuzz is an OpenType text shaping engine.', 'UPDATE', 'N/A', 'http://www.freedesktop.org/software/harfbuzz/release/harfbuzz-0.9.17.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (harfbuzz,0.9.17,0.9.19,MIT & ICU,libs,r0,None,http://www.freedesktop.org/wiki/Software/HarfBuzz,https://bugs.freedesktop.org/enter_bug.cgi?product=HarfBuzz,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icu glib-2.0 cairo freetype,HarfBuzz is an OpenType text shaping engine.,N/A,http://www.freedesktop.org/software/harfbuzz/release/harfbuzz-0.9.17.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['xz', '5.1.2alpha', '5.1.2alpha', 'GPLv2+ & LGPLv2.1+', 'base', 'http://tukaani.org/xz/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'utils for managing LZMA compressed files', 'MATCH', '5.0.4', 'http://tukaani.org/xz/xz-5.1.2alpha.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xz,5.1.2alpha,5.1.2alpha,GPLv2+ & LGPLv2.1+,base,r0,None,http://tukaani.org/xz/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,utils for managing LZMA compressed files,5.0.4,http://tukaani.org/xz/xz-5.1.2alpha.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['python-gitdb', '0.5.4', '0.5.4', 'BSD-3-Clause', 'devel/python', 'http://github.com/gitpython-developers/gitdb', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-async python-smmap python-native python python-native ', 'None', 'None', 'A pure-Python git object database', 'MATCH', 'N/A', 'https://pypi.python.org/packages/source/g/gitdb/gitdb-0.5.4.tar.gz', 'None', 'None']
inserted (python-gitdb,0.5.4,0.5.4,BSD-3-Clause,devel/python,r0,None,http://github.com/gitpython-developers/gitdb,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-async python-smmap python-native python python-native ,A pure-Python git object database,N/A,https://pypi.python.org/packages/source/g/gitdb/gitdb-0.5.4.tar.gz,None)
['mtools', '4.0.18', '4.0.18', 'GPLv3', 'optional', 'http://www.gnu.org/software/mtools/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Mtools is a collection of utilities to access MS-DOS disks from GNU and Unix without mounting them.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/mtools/mtools-4.0.18.tar.bz2', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (mtools,4.0.18,4.0.18,GPLv3,optional,r0,None,http://www.gnu.org/software/mtools/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Mtools is a collection of utilities to access MS-DOS disks from GNU and Unix without mounting them.,N/A,ftp://ftp.gnu.org/gnu/mtools/mtools-4.0.18.tar.bz2,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['libxml-simple-perl', '2.20', '2.20', 'Artistic-1.0 | GPL-1.0', 'libs', 'http://search.cpan.org/~markov/XML-LibXML-Simple-0.93/lib/XML/LibXML/Simple.pod', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml-parser-perl perl perl-native', 'None', 'None', 'The XML::Simple Perl module provides a simple API layer on top of an underlying XML parsing module to maintain XML files (especially configuration files). It is a blunt rewrite of XML::Simple (by Grant McLean) to use the XML::LibXML parser for XML structures, where the original uses plain Perl or SAX parsers.', 'MATCH', 'N/A', 'http://www.cpan.org/modules/by-module/XML/XML-Simple-2.20.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libxml-simple-perl,2.20,2.20,Artistic-1.0 | GPL-1.0,libs,r0,None,http://search.cpan.org/~markov/XML-LibXML-Simple-0.93/lib/XML/LibXML/Simple.pod,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxml-parser-perl perl perl-native,The XML::Simple Perl module provides a simple API layer on top of an underlying XML parsing module to maintain XML files (especially configuration files). It is a blunt rewrite of XML::Simple (by Grant McLean) to use the XML::LibXML parser for XML structures, where the original uses plain Perl or SAX parsers.,N/A,http://www.cpan.org/modules/by-module/XML/XML-Simple-2.20.tar.gz,Saul Wold <sgw@linux.intel.com>)
['cups', '1.6.2', '1.6.3', 'GPLv2 & LGPLv2', 'console/utils', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls libpng jpeg dbus dbus-glib zlib libusb avahi', 'None', 'None', 'An Internet printing system for Unix.', 'UPDATE', '1.6.2', 'http://www.cups.org/software/1.6.2/cups-1.6.2-source.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (cups,1.6.2,1.6.3,GPLv2 & LGPLv2,console/utils,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls libpng jpeg dbus dbus-glib zlib libusb avahi,An Internet printing system for Unix.,1.6.2,http://www.cups.org/software/1.6.2/cups-1.6.2-source.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['pigz', '2.3', '2.3', 'Zlib', 'console/utils', 'http://zlib.net/pigz/', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib', 'None', 'None', 'pigz, which stands for parallel implementation of gzip, is a fully functional replacement for gzip that exploits multiple processors and multiple cores to the hilt when compressing data. pigz was written by Mark Adler, and uses the zlib and pthread libraries.', 'MATCH', 'N/A', 'http://zlib.net/pigz/pigz-2.3.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (pigz,2.3,2.3,Zlib,console/utils,r1,None,http://zlib.net/pigz/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib,pigz, which stands for parallel implementation of gzip, is a fully functional replacement for gzip that exploits multiple processors and multiple cores to the hilt when compressing data. pigz was written by Mark Adler, and uses the zlib and pthread libraries.,N/A,http://zlib.net/pigz/pigz-2.3.tar.gz,Saul Wold <sgw@linux.intel.com>)
['gstreamer1.0-omx', '1.0.0', '1.0.0', 'LGPLv2.1', 'multimedia', 'http://www.gstreamer.net/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base', 'None', 'None', 'OpenMAX IL plugins for GStreamer', 'MATCH', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.0.0.tar.xz', 'None', 'None']
inserted (gstreamer1.0-omx,1.0.0,1.0.0,LGPLv2.1,multimedia,r1,None,http://www.gstreamer.net/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base,OpenMAX IL plugins for GStreamer,N/A,http://gstreamer.freedesktop.org/src/gst-omx/gst-omx-1.0.0.tar.xz,None)
['gcc-cross-initial', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', ' virtual/i586-poky-linux-binutils mpfr-native gmp-native libmpc-native zlib-native', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc-cross-initial,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH, virtual/i586-poky-linux-binutils mpfr-native gmp-native libmpc-native zlib-native,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['systemtap-uprobes', '2.1+gitAUTOINC+addec813fe', '2.2.1+gitAUTOINC+0589021', 'GPLv2', 'base', 'unknown', 'r1', 'virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc systemtap virtual/kernel', 'None', 'None', 'UProbes kernel module for SystemTap', 'UPDATE', 'N/A', 'git://sourceware.org/git/systemtap.git;protocol=git', 'Tom Zanussi <tom.zanussi@intel.com>', 'None']
inserted (systemtap-uprobes,2.1+gitAUTOINC+addec813fe,2.2.1+gitAUTOINC+0589021,GPLv2,base,r1,None,unknown,None,UPDATE,virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc systemtap virtual/kernel,UProbes kernel module for SystemTap,N/A,git://sourceware.org/git/systemtap.git;protocol=git,Tom Zanussi <tom.zanussi@intel.com>)
['gtk-sato-engine', '0.3.3+gitAUTOINC+4740ad8d53', '0.3.3+gitAUTOINC+4740ad8', 'LGPLv2.1 & LGPLv2+', 'x11/base', 'http://www.o-hand.com', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+', 'http://bugzilla.openedhand.com/', 'None', 'Sato theme engine for GTK', 'MATCH', 'N/A', 'git://git.yoctoproject.org/gtk-sato-engine;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gtk-sato-engine,0.3.3+gitAUTOINC+4740ad8d53,0.3.3+gitAUTOINC+4740ad8,LGPLv2.1 & LGPLv2+,x11/base,r0,None,http://www.o-hand.com,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+,Sato theme engine for GTK,N/A,git://git.yoctoproject.org/gtk-sato-engine;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['pkgconfig', '0.28', '0.28', 'GPLv2+', 'console/utils', 'http://pkg-config.freedesktop.org/wiki/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 popt', 'http://bugs.freedesktop.org/buglist.cgi?product=pkg-config', 'None', 'pkg-config is a helper tool used when compiling applications and libraries. It helps determined the correct compiler/link options. It is also language-agnostic.', 'MATCH', 'N/A', 'http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'removes glib-conf, adds circular depends']
inserted (pkgconfig,0.28,0.28,GPLv2+,console/utils,r0,None,http://pkg-config.freedesktop.org/wiki/,http://bugs.freedesktop.org/buglist.cgi?product=pkg-config,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 popt,pkg-config is a helper tool used when compiling applications and libraries. It helps determined the correct compiler/link options. It is also language-agnostic.,N/A,http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz,Saul Wold <sgw@linux.intel.com>)
['kconfig-frontends', '3.10.0.0', '3.10.0.0', 'GPL-2.0', 'devel', 'http://ymorin.is-a-geek.org/projects/kconfig-frontends', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses flex bison gperf pkgconfig-native', 'None', 'None', 'The kconfig-frontends project aims at centralising the effort of keeping an up-to-date, out-of-tree, packaging of the kconfig infrastructure, ready for use by third-party projects. The kconfig-frontends package provides the kconfig parser, as well as all the frontends', 'MATCH', 'N/A', 'http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.10.0.0.tar.xz', 'Saul Wold <sgw@linux.intel.com>', 'PRS Reports Incorrectly']
inserted (kconfig-frontends,3.10.0.0,3.10.0.0,GPL-2.0,devel,r0,None,http://ymorin.is-a-geek.org/projects/kconfig-frontends,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses flex bison gperf pkgconfig-native,The kconfig-frontends project aims at centralising the effort of keeping an up-to-date, out-of-tree, packaging of the kconfig infrastructure, ready for use by third-party projects. The kconfig-frontends package provides the kconfig parser, as well as all the frontends,N/A,http://ymorin.is-a-geek.org/download/kconfig-frontends/kconfig-frontends-3.10.0.0.tar.xz,Saul Wold <sgw@linux.intel.com>)
['xorg-minimal-fonts', '1.0', 'INVALID', 'PD', 'x11/fonts', 'http://www.x.org', 'r2', ' ', 'n/a', '1', 'Minimal fonts required by X.org.', 'MATCH', 'N/A', 'file://misc', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xorg-minimal-fonts,1.0,INVALID,PD,x11/fonts,r2,1,http://www.x.org,n/a,MATCH, ,Minimal fonts required by X.org.,N/A,file://misc,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libxpm', '3.5.10', '3.5.10', 'BSD', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext libsm libxt', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libXpm provides support and common operation for the XPM pixmap format, which is commonly used in legacy X applications. XPM is an extension of the monochrome XBM bitmap specificied in the X protocol.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXpm-3.5.10.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxpm,3.5.10,3.5.10,BSD,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext libsm libxt,libXpm provides support and common operation for the XPM pixmap format, which is commonly used in legacy X applications. XPM is an extension of the monochrome XBM bitmap specificied in the X protocol.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXpm-3.5.10.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['linux-yocto', '3.8.13+gitAUTOINC+8ef9136539_f20047520a', '3.8.13+gitAUTOINC+d4235f1', 'GPLv2', 'kernel', 'unknown', 'r4.2', ' virtual/i586-poky-linux-binutils virtual/i586-poky-linux-gcc kmod-native depmodwrapper-cross', 'None', 'None', 'Yocto Kernel', 'UPDATE', 'N/A', 'git://git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;bareclone=1;branch=standard/base,meta;name=machine,meta', 'Darren Hart <dvhart@linux.intel.com>', 'None']
inserted (linux-yocto,3.8.13+gitAUTOINC+8ef9136539_f20047520a,3.8.13+gitAUTOINC+d4235f1,GPLv2,kernel,r4.2,None,unknown,None,UPDATE, virtual/i586-poky-linux-binutils virtual/i586-poky-linux-gcc kmod-native depmodwrapper-cross,Yocto Kernel,N/A,git://git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;bareclone=1;branch=standard/base,meta;name=machine,meta,Darren Hart <dvhart@linux.intel.com>)
['libnss-mdns', '0.10', '0.10', 'LGPLv2.1+', 'libs', 'http://0pointer.de/lennart/projects/nss-mdns/', 'r7', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc avahi', 'None', 'None', 'NSS module for Multicast DNS name resolution', 'MATCH', 'N/A', 'http://0pointer.de/lennart/projects/nss-mdns/nss-mdns-0.10.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libnss-mdns,0.10,0.10,LGPLv2.1+,libs,r7,None,http://0pointer.de/lennart/projects/nss-mdns/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc avahi,NSS module for Multicast DNS name resolution,N/A,http://0pointer.de/lennart/projects/nss-mdns/nss-mdns-0.10.tar.gz,Saul Wold <sgw@linux.intel.com>)
['libpcre', '8.33', '8.33', 'BSD', 'devel', 'http://www.pcre.org', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bzip2 zlib', 'None', 'None', 'The PCRE library is a set of functions that implement regular expression pattern matching using the same syntax and semantics as Perl 5. PCRE has its own native API, as well as a set of wrapper functions that correspond to the POSIX regular expression API.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/project/pcre/pcre/8.33/pcre-8.33.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (libpcre,8.33,8.33,BSD,devel,r0,None,http://www.pcre.org,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bzip2 zlib,The PCRE library is a set of functions that implement regular expression pattern matching using the same syntax and semantics as Perl 5. PCRE has its own native API, as well as a set of wrapper functions that correspond to the POSIX regular expression API.,N/A,http://downloads.sourceforge.net/project/pcre/pcre/8.33/pcre-8.33.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['dosfstools', '2.11', '2.11', 'GPLv2', 'base', 'unknown', 'r5', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'DOS FAT Filesystem Utilities', 'MATCH', 'N/A', 'ftp://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools/dosfstools-2.11.src.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (dosfstools,2.11,2.11,GPLv2,base,r5,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,DOS FAT Filesystem Utilities,N/A,ftp://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools/dosfstools-2.11.src.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['lighttpd', '1.4.32', '1.4.32', 'BSD', 'net', 'http://www.lighttpd.net/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib libpcre update-rc.d-native', 'http://redmine.lighttpd.net/projects/lighttpd/issues', 'None', 'Lightweight high-performance web server', 'MATCH', 'N/A', 'http://download.lighttpd.net/lighttpd/releases-1.4.x/lighttpd-1.4.32.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (lighttpd,1.4.32,1.4.32,BSD,net,r0,None,http://www.lighttpd.net/,http://redmine.lighttpd.net/projects/lighttpd/issues,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib libpcre update-rc.d-native,Lightweight high-performance web server,N/A,http://download.lighttpd.net/lighttpd/releases-1.4.x/lighttpd-1.4.32.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['latencytop', '0.5', '0.5', 'GPLv2', 'base', 'http://www.latencytop.org/', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libintl ncurses glib-2.0 gtk+', 'n/a', 'None', 'LatencyTOP, a Linux tool measuring and fixing latency', 'MATCH', 'N/A', 'http://www.latencytop.org/download/latencytop-0.5.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (latencytop,0.5,0.5,GPLv2,base,r3,None,http://www.latencytop.org/,n/a,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libintl ncurses glib-2.0 gtk+,LatencyTOP, a Linux tool measuring and fixing latency,N/A,http://www.latencytop.org/download/latencytop-0.5.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['lrzsz', '0.12.20', '0.12.20', 'GPLv2+', 'console/network', 'http://www.ohse.de/uwe/software/lrzsz.html', 'r6', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', "Lrzsz is a cosmetically modified zmodem/ymodem/xmodem package built from the public-domain version of Chuck Forsberg's rzsz package. These programs use error correcting protocols ({z,x,y}modem) to send (sz, sx, sb) and receive (rz, rx, rb) files over a dial-in serial port from a variety of programs running under various operating systems. ", 'MATCH', 'N/A', 'http://www.ohse.de/uwe/releases/lrzsz-0.12.20.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (lrzsz,0.12.20,0.12.20,GPLv2+,console/network,r6,None,http://www.ohse.de/uwe/software/lrzsz.html,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,Lrzsz is a cosmetically modified zmodem/ymodem/xmodem package built from the public-domain version of Chuck Forsberg's rzsz package. These programs use error correcting protocols ({z,x,y}modem) to send (sz, sx, sb) and receive (rz, rx, rb) files over a dial-in serial port from a variety of programs running under various operating systems. ,N/A,http://www.ohse.de/uwe/releases/lrzsz-0.12.20.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['glib-2.0', '2.36.3', '2.37.4', 'LGPLv2+ & BSD & PD', 'libs', 'unknown', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0-native virtual/libiconv libffi zlib gtk-doc-stub-native', 'http://bugzilla.gnome.org', '1', 'GLib is a general-purpose utility library, which provides many useful data types, macros, type conversions, string utilities, file utilities, a main loop abstraction, and so on.', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/glib/2.36/glib-2.36.3.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', '2.35.8 is unstable']
inserted (glib-2.0,2.36.3,2.37.4,LGPLv2+ & BSD & PD,libs,r0,1,unknown,http://bugzilla.gnome.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0-native virtual/libiconv libffi zlib gtk-doc-stub-native,GLib is a general-purpose utility library, which provides many useful data types, macros, type conversions, string utilities, file utilities, a main loop abstraction, and so on.,N/A,http://ftp.gnome.org/pub/GNOME/sources/glib/2.36/glib-2.36.3.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['hdparm', '9.43', '9.43', 'BSD', 'console/utils', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'hdparm is a Linux shell utility for viewing and manipulating various IDE drive and driver parameters.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/hdparm/hdparm-9.43.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (hdparm,9.43,9.43,BSD,console/utils,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,hdparm is a Linux shell utility for viewing and manipulating various IDE drive and driver parameters.,N/A,http://downloads.sourceforge.net/hdparm/hdparm-9.43.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['linux-dummy', '1.0', 'INVALID', 'GPL', 'kernel', 'unknown', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Dummy Linux kernel', 'MATCH', 'N/A', 'file://COPYING.GPL', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (linux-dummy,1.0,INVALID,GPL,kernel,r1,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Dummy Linux kernel,N/A,file://COPYING.GPL,Saul Wold <sgw@linux.intel.com>)
['libevent', '2.0.21', '2.0.21', 'BSD', 'libs', 'http://libevent.org/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://sourceforge.net/tracker/?group_id=50884&atid=461322', 'None', 'An asynchronous event notification library', 'MATCH', 'N/A', 'http://github.com/downloads/libevent/libevent/libevent-2.0.21-stable.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (libevent,2.0.21,2.0.21,BSD,libs,r1,None,http://libevent.org/,http://sourceforge.net/tracker/?group_id=50884&atid=461322,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,An asynchronous event notification library,N/A,http://github.com/downloads/libevent/libevent/libevent-2.0.21-stable.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['gtk-theme-torturer', '0.0.0+gitAUTOINC+99962ae39b', '0.0.0+gitAUTOINC+99962ae', 'GPLv2', 'devel', 'http://wiki.laptop.org/go/GTK_for_OLPC', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+', 'None', 'None', 'Gtk+ Theme Benchmark Program', 'MATCH', 'N/A', 'git://dev.laptop.org/projects/soc-gtk/;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gtk-theme-torturer,0.0.0+gitAUTOINC+99962ae39b,0.0.0+gitAUTOINC+99962ae,GPLv2,devel,r0,None,http://wiki.laptop.org/go/GTK_for_OLPC,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+,Gtk+ Theme Benchmark Program,N/A,git://dev.laptop.org/projects/soc-gtk/;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['gst-ffmpeg', '0.10.13', '0.11.2', 'GPLv2+ & LGPLv2+ & ( (GPLv2+ & LGPLv2.1+) | (GPLv3+ & LGPLv3+) )', 'multimedia', 'http://www.gstreamer.net/', 'r4', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base zlib bzip2', 'None', 'None', 'FFmpeg-based GStreamer plug-in', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-ffmpeg/gst-ffmpeg-0.10.13.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'not compatible with gst-fluendo 0.10.x']
inserted (gst-ffmpeg,0.10.13,0.11.2,GPLv2+ & LGPLv2+ & ( (GPLv2+ & LGPLv2.1+) | (GPLv3+ & LGPLv3+) ),multimedia,r4,None,http://www.gstreamer.net/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base zlib bzip2,FFmpeg-based GStreamer plug-in,N/A,http://gstreamer.freedesktop.org/src/gst-ffmpeg/gst-ffmpeg-0.10.13.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['libsdl', '1.2.15', '1.2.15-1', 'LGPLv2.1', 'libs', 'http://www.libsdl.org', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl virtual/libx11 libxext libxrandr libxrender tslib alsa-lib', 'http://bugzilla.libsdl.org/', 'None', 'Simple DirectMedia Layer is a cross-platform multimedia library designed to provide low level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, and 2D video framebuffer.', 'UPDATE', 'N/A', 'http://www.libsdl.org/release/SDL-1.2.15.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (libsdl,1.2.15,1.2.15-1,LGPLv2.1,libs,r2,None,http://www.libsdl.org,http://bugzilla.libsdl.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl virtual/libx11 libxext libxrandr libxrender tslib alsa-lib,Simple DirectMedia Layer is a cross-platform multimedia library designed to provide low level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, and 2D video framebuffer.,N/A,http://www.libsdl.org/release/SDL-1.2.15.tar.gz,Kai Kang <kai.kang@windriver.com>)
['dpkg', '1.16.10', '1.16.10', 'GPLv2.0+', 'base', 'unknown', 'r19.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib bzip2 perl ncurses perl-native', 'None', 'None', 'Package maintenance system for Debian.', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.16.10.tar.xz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (dpkg,1.16.10,1.16.10,GPLv2.0+,base,r19.0,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib bzip2 perl ncurses perl-native,Package maintenance system for Debian.,N/A,ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.16.10.tar.xz,Saul Wold <sgw@linux.intel.com>)
['beecrypt', '4.2.1', '4.2.1', 'GPLv2 & LGPLv2.1', 'base', 'http://sourceforge.net/projects/beecrypt', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icu', 'None', 'None', 'Beecrypt is a general-purpose cryptography library.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/beecrypt/beecrypt-4.2.1.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (beecrypt,4.2.1,4.2.1,GPLv2 & LGPLv2.1,base,r3,None,http://sourceforge.net/projects/beecrypt,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icu,Beecrypt is a general-purpose cryptography library.,N/A,http://downloads.sourceforge.net/beecrypt/beecrypt-4.2.1.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['pm-utils', '1.4.1', '1.4.1', 'GPLv2', 'base', 'http://pm-utils.freedesktop.org/wiki/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Simple shell command line tools to suspend and hibernate.', 'MATCH', 'N/A', 'http://pm-utils.freedesktop.org/releases/pm-utils-1.4.1.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (pm-utils,1.4.1,1.4.1,GPLv2,base,r1,None,http://pm-utils.freedesktop.org/wiki/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Simple shell command line tools to suspend and hibernate.,N/A,http://pm-utils.freedesktop.org/releases/pm-utils-1.4.1.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['grep', '2.14', '2.14', 'GPLv3', 'console/utils', 'http://savannah.gnu.org/projects/grep/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'http://savannah.gnu.org/bugs/?group=grep', 'None', 'GNU grep utility', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/grep/grep-2.14.tar.xz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (grep,2.14,2.14,GPLv3,console/utils,r0,None,http://savannah.gnu.org/projects/grep/,http://savannah.gnu.org/bugs/?group=grep,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,GNU grep utility,N/A,ftp://ftp.gnu.org/gnu/grep/grep-2.14.tar.xz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['guile', '2.0.9', '2.0.9', 'GPLv3', 'devel', 'http://www.gnu.org/software/guile/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libunistring bdwgc gmp libtool libffi guile-native libatomics-ops', 'None', 'None', "Guile is the GNU Ubiquitous Intelligent Language for Extensions, the official extension language for the GNU operating system. Guile is a library designed to help programmers create flexible applications. Using Guile in an application allows the application's functionality to be extended by users or other programmers with plug-ins, modules, or scripts. Guile provides what might be described as 'practical software freedom,' making it possible for users to customize an application to meet their needs without digging into the application's internals.", 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/guile/guile-2.0.9.tar.xz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (guile,2.0.9,2.0.9,GPLv3,devel,r0,None,http://www.gnu.org/software/guile/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libunistring bdwgc gmp libtool libffi guile-native libatomics-ops,Guile is the GNU Ubiquitous Intelligent Language for Extensions, the official extension language for the GNU operating system. Guile is a library designed to help programmers create flexible applications. Using Guile in an application allows the application's functionality to be extended by users or other programmers with plug-ins, modules, or scripts. Guile provides what might be described as 'practical software freedom,' making it possible for users to customize an application to meet their needs without digging into the application's internals.,N/A,ftp://ftp.gnu.org/gnu/guile/guile-2.0.9.tar.xz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['python-scons', '2.3.0', '2.3.0', 'MIT', 'devel/python', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native ', 'None', 'None', 'A Software Construction Tool', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/scons/scons-2.3.0.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-scons,2.3.0,2.3.0,MIT,devel/python,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native ,A Software Construction Tool,N/A,http://downloads.sourceforge.net/scons/scons-2.3.0.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['dtc', '1.4.0+gitAUTOINC+65cc4d2748', '1.4.0+gitAUTOINC+65cc4d2', 'GPLv2 | BSD', 'bootloader', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native', 'None', 'None', 'The Device Tree Compiler is a tool used to manipulate the Open-Firmware-like device tree used by PowerPC kernels.', 'MATCH', 'N/A', 'git://www.jdl.com/software/dtc.git;protocol=git', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (dtc,1.4.0+gitAUTOINC+65cc4d2748,1.4.0+gitAUTOINC+65cc4d2,GPLv2 | BSD,bootloader,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native,The Device Tree Compiler is a tool used to manipulate the Open-Firmware-like device tree used by PowerPC kernels.,N/A,git://www.jdl.com/software/dtc.git;protocol=git,Saul Wold <sgw@linux.intel.com>)
['libglu', '9.0.0', '9.0.0', 'MIT', 'x11', 'http://mesa3d.org', '0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl', 'https://bugs.freedesktop.org', '2', 'GLU is a utility toolkit used with OpenGL implementations', 'MATCH', 'N/A', 'ftp://ftp.freedesktop.org/pub/mesa/glu/glu-9.0.0.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libglu,9.0.0,9.0.0,MIT,x11,0,2,http://mesa3d.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libgl,GLU is a utility toolkit used with OpenGL implementations,N/A,ftp://ftp.freedesktop.org/pub/mesa/glu/glu-9.0.0.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['pong-clock', '1.0', 'INVALID', 'GPLv2+', 'base', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 xdmcp xau', 'None', 'None', 'A clock combined with a game of pong', 'MATCH', '1.0', 'file://pong-clock-no-flicker.c', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (pong-clock,1.0,INVALID,GPLv2+,base,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 xdmcp xau,A clock combined with a game of pong,1.0,file://pong-clock-no-flicker.c,Constantin Musca <constantinx.musca@intel.com>)
['xprop', '1.2.1', '1.2.1', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxmu virtual/libx11', 'https://bugs.freedesktop.org', '1', 'The xprop utility is for displaying window and font properties in an X server. One window or font is selected using the command line arguments or possibly in the case of a window, by clicking on the desired window. A list of properties is then given, possibly with formatting information.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xprop-1.2.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xprop,1.2.1,1.2.1,MIT-X,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxmu virtual/libx11,The xprop utility is for displaying window and font properties in an X server. One window or font is selected using the command line arguments or possibly in the case of a window, by clicking on the desired window. A list of properties is then given, possibly with formatting information.,N/A,http://xorg.freedesktop.org/releases/individual/app/xprop-1.2.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gtk-update-icon-cache-native', '3.4.4', '3.9.8', 'LGPLv2 & LGPLv2+ & LGPLv2.1+', 'libs', 'unknown', 'r0', 'pkgconfig-native gdk-pixbuf-native', 'None', 'None', 'Just gtk-update-icon-cache built from GTK+ natively, for on-host postinst script execution.', 'UPDATE', 'N/A', 'http://download.gnome.org/sources/gtk+/3.4/gtk+-3.4.4.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gtk-update-icon-cache-native,3.4.4,3.9.8,LGPLv2 & LGPLv2+ & LGPLv2.1+,libs,r0,None,unknown,None,UPDATE,pkgconfig-native gdk-pixbuf-native,Just gtk-update-icon-cache built from GTK+ natively, for on-host postinst script execution.,N/A,http://download.gnome.org/sources/gtk+/3.4/gtk+-3.4.4.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['libjson', '0.9', '0.9', 'MIT', 'base', 'http://oss.metaparadigm.com/json-c/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'JSON-C - A JSON implementation in C', 'MATCH', 'N/A', 'http://oss.metaparadigm.com/json-c/json-c-0.9.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (libjson,0.9,0.9,MIT,base,r0,None,http://oss.metaparadigm.com/json-c/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,JSON-C - A JSON implementation in C,N/A,http://oss.metaparadigm.com/json-c/json-c-0.9.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['fontsproto', '2.1.2', '2.1.2', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Font rasterisation extensions. These extensions are used to control server-side font configurations.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/fontsproto-2.1.2.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (fontsproto,2.1.2,2.1.2,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Font rasterisation extensions. These extensions are used to control server-side font configurations.,N/A,http://xorg.freedesktop.org/releases/individual/proto/fontsproto-2.1.2.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['matchbox-desktop-sato', '0.1+gitAUTOINC+810b0b08eb', '0.1+gitAUTOINC+810b0b0', 'GPLv2', 'x11', 'http://matchbox-project.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://bugzilla.openedhand.com/', 'None', 'Sato desktop folders', 'MATCH', 'N/A', 'git://git.yoctoproject.org/matchbox-desktop-sato;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (matchbox-desktop-sato,0.1+gitAUTOINC+810b0b08eb,0.1+gitAUTOINC+810b0b0,GPLv2,x11,r1,None,http://matchbox-project.org,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Sato desktop folders,N/A,git://git.yoctoproject.org/matchbox-desktop-sato;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['xf86-input-mouse', '1.9.0', '1.9.0', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ', 'https://bugs.freedesktop.org', '2', "mouse is an Xorg input driver for mice. The driver supports most available mouse types and interfaces. The mouse driver functions as a pointer input device, and may be used as the X server's core pointer. Multiple mice are supported by multiple instances of this driver.", 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-input-mouse-1.9.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-input-mouse,1.9.0,1.9.0,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ,mouse is an Xorg input driver for mice. The driver supports most available mouse types and interfaces. The mouse driver functions as a pointer input device, and may be used as the X server's core pointer. Multiple mice are supported by multiple instances of this driver.,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-input-mouse-1.9.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['hicolor-icon-theme', '0.12', '0.12', 'GPLv2', 'unknown', 'http://icon-theme.freedesktop.org/wiki/HicolorTheme', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native gnome-common-native', 'https://bugs.freedesktop.org/', 'None', 'default icon theme that all icon themes automatically inherit from.', 'MATCH', 'N/A', 'http://icon-theme.freedesktop.org/releases/hicolor-icon-theme-0.12.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (hicolor-icon-theme,0.12,0.12,GPLv2,unknown,r1,None,http://icon-theme.freedesktop.org/wiki/HicolorTheme,https://bugs.freedesktop.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native gnu-config-native gnome-common-native,default icon theme that all icon themes automatically inherit from.,N/A,http://icon-theme.freedesktop.org/releases/hicolor-icon-theme-0.12.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['pointercal', '0.0', 'INVALID', 'MIT', 'base', 'unknown', 'r11', ' ', 'None', 'None', 'Touchscreen calibration data', 'MATCH', '0.0', 'file://pointercal', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (pointercal,0.0,INVALID,MIT,base,r11,None,unknown,None,MATCH, ,Touchscreen calibration data,0.0,file://pointercal,Constantin Musca <constantinx.musca@intel.com>)
['libcroco', '0.6.8', '0.6.8', 'LGPLv2 & LGPLv2.1', 'x11/utils', 'http://www.gnome.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 libxml2 zlib gnome-common-native', 'https://bugzilla.gnome.org/', 'None', 'The Libcroco project is an effort to build a generic Cascading Style Sheet (CSS) parsing and manipulation toolkit', 'MATCH', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/libcroco/0.6/libcroco-0.6.8.tar.xz;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libcroco,0.6.8,0.6.8,LGPLv2 & LGPLv2.1,x11/utils,r1,None,http://www.gnome.org/,https://bugzilla.gnome.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 libxml2 zlib gnome-common-native,The Libcroco project is an effort to build a generic Cascading Style Sheet (CSS) parsing and manipulation toolkit,N/A,http://ftp.gnome.org/pub/GNOME/sources/libcroco/0.6/libcroco-0.6.8.tar.xz;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['xf86-video-modesetting', '0.8.0', '0.8.0', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros', 'https://bugs.freedesktop.org', '2', 'X.Org X server -- modesetting display driver', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-video-modesetting-0.8.0.tar.bz2', 'None', 'None']
inserted (xf86-video-modesetting,0.8.0,0.8.0,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc renderproto videoproto xextproto fontsproto virtual/xserver xproto randrproto util-macros,X.Org X server -- modesetting display driver,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-video-modesetting-0.8.0.tar.bz2,None)
['libowl', '0.1+gitAUTOINC+6ebc8ac8f8', '0.1+gitAUTOINC+6ebc8ac', 'GPLv2 & LGPLv2+', 'libs', 'http://www.o-hand.com', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+', 'http://bugzilla.openedhand.com/', 'None', 'OpenedHand Widget Library', 'MATCH', 'N/A', 'git://git.yoctoproject.org/libowl;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libowl,0.1+gitAUTOINC+6ebc8ac8f8,0.1+gitAUTOINC+6ebc8ac,GPLv2 & LGPLv2+,libs,r0,None,http://www.o-hand.com,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+,OpenedHand Widget Library,N/A,git://git.yoctoproject.org/libowl;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['shadow-sysroot', '4.1.4.3', 'INVALID', 'BSD | Artistic-1.0', 'base utils', 'http://pkg-shadow.alioth.debian.org', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc base-passwd', 'https://alioth.debian.org/tracker/?group_id=30580', 'None', 'Shadow utils requirements for useradd.bbclass', 'MATCH', 'N/A', 'file://login.defs_shadow-sysroot', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (shadow-sysroot,4.1.4.3,INVALID,BSD | Artistic-1.0,base utils,r3,None,http://pkg-shadow.alioth.debian.org,https://alioth.debian.org/tracker/?group_id=30580,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc base-passwd,Shadow utils requirements for useradd.bbclass,N/A,file://login.defs_shadow-sysroot,Saul Wold <sgw@linux.intel.com>)
['telepathy-python', '0.15.19', '0.15.19', 'LGPLv2.1+', 'base', 'http://telepathy.freedesktop.org/wiki/', 'r6', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxslt-native python-native ', 'None', 'None', 'Telepathy framework - Python package', 'MATCH', 'N/A', 'http://telepathy.freedesktop.org/releases/telepathy-python/telepathy-python-0.15.19.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (telepathy-python,0.15.19,0.15.19,LGPLv2.1+,base,r6,None,http://telepathy.freedesktop.org/wiki/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxslt-native python-native ,Telepathy framework - Python package,N/A,http://telepathy.freedesktop.org/releases/telepathy-python/telepathy-python-0.15.19.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['dbus-glib', '0.100.2', '0.100.2', 'AFL-2 | GPLv2+', 'base', 'http://www.freedesktop.org/Software/dbus', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat glib-2.0 virtual/libintl dbus-glib-native dbus', 'None', 'None', 'GLib bindings for the D-Bus message bus that integrate the D-Bus library with the GLib thread abstraction and main loop.', 'MATCH', 'N/A', 'http://dbus.freedesktop.org/releases/dbus-glib/dbus-glib-0.100.2.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (dbus-glib,0.100.2,0.100.2,AFL-2 | GPLv2+,base,r0,None,http://www.freedesktop.org/Software/dbus,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat glib-2.0 virtual/libintl dbus-glib-native dbus,GLib bindings for the D-Bus message bus that integrate the D-Bus library with the GLib thread abstraction and main loop.,N/A,http://dbus.freedesktop.org/releases/dbus-glib/dbus-glib-0.100.2.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['opkg-collateral', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'opkg configuration files', 'MATCH', 'N/A', 'file://opkg.conf.comments', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (opkg-collateral,1.0,INVALID,MIT,base,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,opkg configuration files,N/A,file://opkg.conf.comments,Radu Moisan <radu.moisan@intel.com>)
['powertop', '2.3', '2.4', 'GPLv2', 'base', 'http://01.org/powertop/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses libnl pciutils virtual/update-alternatives', 'http://bugzilla.lesswatts.org/', 'None', 'Linux tool to diagnose issues with power consumption and power management.', 'UPDATE', 'N/A', 'http://01.org/powertop/sites/default/files/downloads/powertop-2.3.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', "Do not upgrade to version 1.97 since it's a beta release of the comming PowerTOP 2.0"]
inserted (powertop,2.3,2.4,GPLv2,base,r0,None,http://01.org/powertop/,http://bugzilla.lesswatts.org/,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses libnl pciutils virtual/update-alternatives,Linux tool to diagnose issues with power consumption and power management.,N/A,http://01.org/powertop/sites/default/files/downloads/powertop-2.3.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['qmmp', '0.6.6', '0.7.1', 'GPLv2', 'multimedia', 'http://qmmp.ylsoftware.com', 'r0', 'qt4-tools-native qt4-x11 autoconf-native automake-native libtool-native libtool-cross gnu-config-native cmake-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc taglib libmad libvorbis libogg alsa-lib libsndfile1 libsamplerate0 curl', 'None', 'None', 'Qmmp (Qt-based Multimedia Player) is an audio-player, written with help of Qt library', 'UPDATE', 'N/A', 'http://qmmp.ylsoftware.com/files/qmmp-0.6.6.tar.bz2', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (qmmp,0.6.6,0.7.1,GPLv2,multimedia,r0,None,http://qmmp.ylsoftware.com,None,UPDATE,qt4-tools-native qt4-x11 autoconf-native automake-native libtool-native libtool-cross gnu-config-native cmake-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc taglib libmad libvorbis libogg alsa-lib libsndfile1 libsamplerate0 curl,Qmmp (Qt-based Multimedia Player) is an audio-player, written with help of Qt library,N/A,http://qmmp.ylsoftware.com/files/qmmp-0.6.6.tar.bz2,Kai Kang <kai.kang@windriver.com>)
['telepathy-glib', '0.20.1', '0.21.1', 'LGPLv2.1+', 'base', 'http://telepathy.freedesktop.org/wiki/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus python-native-runtime dbus-native dbus-glib libxslt-native', 'None', 'None', 'Telepathy Framework: GLib-based helper library for connection managers', 'UPDATE', 'N/A', 'http://telepathy.freedesktop.org/releases/telepathy-glib/telepathy-glib-0.20.1.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (telepathy-glib,0.20.1,0.21.1,LGPLv2.1+,base,r0,None,http://telepathy.freedesktop.org/wiki/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 dbus python-native-runtime dbus-native dbus-glib libxslt-native,Telepathy Framework: GLib-based helper library for connection managers,N/A,http://telepathy.freedesktop.org/releases/telepathy-glib/telepathy-glib-0.20.1.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['gaku', '0.1+gitAUTOINC+a0be2fe4b5', '0.1+gitAUTOINC+a0be2fe', 'GPLv2+', 'base', 'unknown', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gstreamer libowl-av', 'None', 'None', 'Music player', 'MATCH', '0.0+svnr399', 'git://git.yoctoproject.org/gaku;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gaku,0.1+gitAUTOINC+a0be2fe4b5,0.1+gitAUTOINC+a0be2fe,GPLv2+,base,r0,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ gstreamer libowl-av,Music player,0.0+svnr399,git://git.yoctoproject.org/gaku;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['which', '2.20', '2.20', 'GPLv3+', 'libs', 'http://carlo17.home.xs4all.nl/which/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cwautomacros-native virtual/update-alternatives', 'None', 'None', 'Which is a utility that prints out the full path of the executables that bash(1) would execute when the passed program names would have been entered on the shell prompt. It does this by using the exact same algorithm as bash.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/which/which-2.20.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (which,2.20,2.20,GPLv3+,libs,r3,None,http://carlo17.home.xs4all.nl/which/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cwautomacros-native virtual/update-alternatives,Which is a utility that prints out the full path of the executables that bash(1) would execute when the passed program names would have been entered on the shell prompt. It does this by using the exact same algorithm as bash.,N/A,ftp://ftp.gnu.org/gnu/which/which-2.20.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['libcap', '2.22', '2.22', 'BSD | GPLv2', 'base', 'http://sites.google.com/site/fullycapable/', 'r5', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr perl-native-runtime ', 'None', 'None', 'support for getting/setting POSIX.1e capabilities', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/libc/libcap2/libcap2_2.22.orig.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libcap,2.22,2.22,BSD | GPLv2,base,r5,None,http://sites.google.com/site/fullycapable/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr perl-native-runtime ,support for getting/setting POSIX.1e capabilities,N/A,ftp://ftp.debian.org/debian/pool/main/libc/libcap2/libcap2_2.22.orig.tar.gz,Saul Wold <sgw@linux.intel.com>)
['libfakekey', '0.0+gitAUTOINC+e327ff049b', '0.0+gitAUTOINC+e327ff0', 'LGPLv2+', 'x11/wm', 'http://matchbox-project.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxtst', 'http://bugzilla.openedhand.com/', 'None', "libfakekey is a simple library for converting UTF-8 characters into 'fake' X key-presses.", 'MATCH', 'N/A', 'git://git.yoctoproject.org/libfakekey;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libfakekey,0.0+gitAUTOINC+e327ff049b,0.0+gitAUTOINC+e327ff0,LGPLv2+,x11/wm,r0,None,http://matchbox-project.org/,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxtst,libfakekey is a simple library for converting UTF-8 characters into 'fake' X key-presses.,N/A,git://git.yoctoproject.org/libfakekey;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['glib-networking', '2.36.2', '2.37.4', 'LGPLv2', 'libs', 'http://git.gnome.org/browse/glib-networking/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnutls intltool-native', 'http://bugzilla.gnome.org', 'None', 'glib-networking contains the implementations of certain GLib networking features that cannot be implemented directly in GLib itself because of their dependencies.', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/glib-networking/2.36/glib-networking-2.36.2.tar.xz', 'Saul Wold <sgw@linux.intel.com>', 'Pending Glib-2.0 Update']
inserted (glib-networking,2.36.2,2.37.4,LGPLv2,libs,r0,None,http://git.gnome.org/browse/glib-networking/,http://bugzilla.gnome.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gnutls intltool-native,glib-networking contains the implementations of certain GLib networking features that cannot be implemented directly in GLib itself because of their dependencies.,N/A,http://ftp.gnome.org/pub/GNOME/sources/glib-networking/2.36/glib-networking-2.36.2.tar.xz,Saul Wold <sgw@linux.intel.com>)
['wireless-tools', '29', '29', 'GPLv2 & (LGPLv2.1 | MPL-1.1 | BSD)', 'base', 'http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html', 'r4', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', '1', 'Tools for the Linux Standard Wireless Extension Subsystem', 'MATCH', 'N/A', 'http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/wireless_tools.29.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (wireless-tools,29,29,GPLv2 & (LGPLv2.1 | MPL-1.1 | BSD),base,r4,1,http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Tools for the Linux Standard Wireless Extension Subsystem,N/A,http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/wireless_tools.29.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['fixesproto', '5.0', '5.0', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Fixes extension. This extension is designed to provide server-side support for application work arounds to shortcomings in the core X window system.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/fixesproto-5.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (fixesproto,5.0,5.0,MIT & MIT-style,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Fixes extension. This extension is designed to provide server-side support for application work arounds to shortcomings in the core X window system.,N/A,http://xorg.freedesktop.org/releases/individual/proto/fixesproto-5.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['docbook-sgml-dtd-4.1-native', '1.0', '41', 'OASIS', 'base', 'http://www.docbook.org/sgml/', 'r3.0', ' sgml-common-native', 'None', 'None', 'Document type definitions for verification of SGML data files against the DocBook rule set', 'UPDATE', 'N/A', 'http://docbook.org/sgml/4.1/docbk41.zip', 'Saul Wold <sgw@linux.intel.com>', 'PRS Reports Incorrectly']
inserted (docbook-sgml-dtd-4.1-native,1.0,41,OASIS,base,r3.0,None,http://www.docbook.org/sgml/,None,UPDATE, sgml-common-native,Document type definitions for verification of SGML data files against the DocBook rule set,N/A,http://docbook.org/sgml/4.1/docbk41.zip,Saul Wold <sgw@linux.intel.com>)
['quota', '4.01', '4.01', 'BSD & GPLv2+ & LGPLv2.1+', 'base', 'http://sourceforge.net/projects/linuxquota/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gettext-native e2fsprogs tcp-wrappers', 'http://sourceforge.net/tracker/?group_id=18136&atid=118136', 'None', 'display disk usage and limits', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/project/linuxquota/quota-tools/4.01/quota-4.01.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (quota,4.01,4.01,BSD & GPLv2+ & LGPLv2.1+,base,r1,None,http://sourceforge.net/projects/linuxquota/,http://sourceforge.net/tracker/?group_id=18136&atid=118136,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gettext-native e2fsprogs tcp-wrappers,display disk usage and limits,N/A,http://downloads.sourceforge.net/project/linuxquota/quota-tools/4.01/quota-4.01.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['iproute2', '3.9.0', '3.10.0', 'GPLv2+', 'base', 'http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native iptables virtual/update-alternatives', 'None', 'None', 'Iproute2 is a collection of utilities for controlling TCP / IP networking and traffic control in Linux. Of the utilities ip and tc are the most important. ip controls IPv4 and IPv6 configuration and tc stands for traffic control.', 'UPDATE', 'N/A', 'http://kernel.org/pub/linux/utils/net/iproute2/iproute2-3.9.0.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (iproute2,3.9.0,3.10.0,GPLv2+,base,r0,None,http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native iptables virtual/update-alternatives,Iproute2 is a collection of utilities for controlling TCP / IP networking and traffic control in Linux. Of the utilities ip and tc are the most important. ip controls IPv4 and IPv6 configuration and tc stands for traffic control.,N/A,http://kernel.org/pub/linux/utils/net/iproute2/iproute2-3.9.0.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['nss-myhostname', '0.3', '0.3', 'LGPLv2.1', 'base', 'http://0pointer.de/lennart/projects/nss-myhostname/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing host name resolution for the locally configured system hostname as returned by gethostname(2).', 'MATCH', 'N/A', 'http://0pointer.de/lennart/projects/nss-myhostname/nss-myhostname-0.3.tar.gz', 'None', 'None']
inserted (nss-myhostname,0.3,0.3,LGPLv2.1,base,r0,None,http://0pointer.de/lennart/projects/nss-myhostname/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing host name resolution for the locally configured system hostname as returned by gethostname(2).,N/A,http://0pointer.de/lennart/projects/nss-myhostname/nss-myhostname-0.3.tar.gz,None)
['xrandr', '1.4.0', '1.4.1', 'MIT', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxrandr libxrender', 'https://bugs.freedesktop.org', '1', 'Xrandr is used to set the size, orientation and/or reflection of the outputs for a screen. It can also set the screen size.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xrandr-1.4.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xrandr,1.4.0,1.4.1,MIT,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxrandr libxrender,Xrandr is used to set the size, orientation and/or reflection of the outputs for a screen. It can also set the screen size.,N/A,http://xorg.freedesktop.org/releases/individual/app/xrandr-1.4.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['web-webkit', '0.1+gitAUTOINC+b0676c190f', '0.1+gitAUTOINC+b0676c1', 'LGPLv2.1', 'x11', 'http://o-hand.com/', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gtk+ webkit-gtk libowl', 'http://bugzilla.openedhand.com/', 'None', 'Multi-platform web browsing application.', 'MATCH', 'N/A', 'git://git.yoctoproject.org/web-webkit;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (web-webkit,0.1+gitAUTOINC+b0676c190f,0.1+gitAUTOINC+b0676c1,LGPLv2.1,x11,r2,None,http://o-hand.com/,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gtk+ webkit-gtk libowl,Multi-platform web browsing application.,N/A,git://git.yoctoproject.org/web-webkit;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['cronie', '1.4.9', '1.4.9', 'ISC & BSD', 'utils', 'https://fedorahosted.org/cronie/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native base-passwd shadow-native shadow-sysroot shadow', 'mmaslano@redhat.com', 'None', 'Cronie contains the standard UNIX daemon crond that runs specified programs at scheduled times and related tools. It is based on the original cron and has security and configuration enhancements like the ability to use pam and SELinux.', 'MATCH', 'N/A', 'https://fedorahosted.org/releases/c/r/cronie/cronie-1.4.9.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (cronie,1.4.9,1.4.9,ISC & BSD,utils,r0,None,https://fedorahosted.org/cronie/,mmaslano@redhat.com,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native base-passwd shadow-native shadow-sysroot shadow,Cronie contains the standard UNIX daemon crond that runs specified programs at scheduled times and related tools. It is based on the original cron and has security and configuration enhancements like the ability to use pam and SELinux.,N/A,https://fedorahosted.org/releases/c/r/cronie/cronie-1.4.9.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['xvideo-tests', '0.1+gitAUTOINC+f8f320d025', '0.1+gitAUTOINC+f8f320d', 'GPLv2+', 'base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxv', 'None', 'None', 'Simple XVideo test application', 'MATCH', 'N/A', 'git://git.yoctoproject.org/test-xvideo;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (xvideo-tests,0.1+gitAUTOINC+f8f320d025,0.1+gitAUTOINC+f8f320d,GPLv2+,base,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxv,Simple XVideo test application,N/A,git://git.yoctoproject.org/test-xvideo;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['wpa-supplicant', '2.0', '2.0', 'BSD', 'network', 'http://hostap.epitest.fi/wpa_supplicant/', 'r1', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls dbus libnl', 'http://hostap.epitest.fi/bugz/', 'None', 'A Client for Wi-Fi Protected Access (WPA).', 'MATCH', 'N/A', 'http://hostap.epitest.fi/releases/wpa_supplicant-2.0.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (wpa-supplicant,2.0,2.0,BSD,network,r1,None,http://hostap.epitest.fi/wpa_supplicant/,http://hostap.epitest.fi/bugz/,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gnutls dbus libnl,A Client for Wi-Fi Protected Access (WPA).,N/A,http://hostap.epitest.fi/releases/wpa_supplicant-2.0.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['libxxf86dga', '1.1.3', '1.1.4', 'MIT-X', 'x11/libs', 'http://www.x.org', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86dgaproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libXxf86dga provides the XFree86-DGA extension, which allows direct graphics access to a framebuffer-like region, and also allows relative mouse reporting, et al. It is mainly used by games and emulators for games.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXxf86dga-1.1.3.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxxf86dga,1.1.3,1.1.4,MIT-X,x11/libs,r2,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86dgaproto,libXxf86dga provides the XFree86-DGA extension, which allows direct graphics access to a framebuffer-like region, and also allows relative mouse reporting, et al. It is mainly used by games and emulators for games.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXxf86dga-1.1.3.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['strace', '4.8', '4.8', 'BSD', 'console/utils', 'http://strace.sourceforge.net', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libaio', 'None', 'None', 'strace is a system call tracing tool.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/strace/strace-4.8.tar.xz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (strace,4.8,4.8,BSD,console/utils,r0,None,http://strace.sourceforge.net,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libaio,strace is a system call tracing tool.,N/A,http://downloads.sourceforge.net/strace/strace-4.8.tar.xz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['hostap-utils', '0.4.7', '0.4.7', 'GPLv2', 'kernel/userland', 'http://hostap.epitest.fi', 'r4', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://hostap.epitest.fi/bugz/', 'None', 'The hostap driver supports Host AP mode, it allows for IEEE 802.11 management functions on the host computer and allows the system to act as an access point.', 'MATCH', 'N/A', 'http://hostap.epitest.fi/releases/hostap-utils-0.4.7.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (hostap-utils,0.4.7,0.4.7,GPLv2,kernel/userland,r4,None,http://hostap.epitest.fi,http://hostap.epitest.fi/bugz/,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,The hostap driver supports Host AP mode, it allows for IEEE 802.11 management functions on the host computer and allows the system to act as an access point.,N/A,http://hostap.epitest.fi/releases/hostap-utils-0.4.7.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['trace-cmd', '1.2+gitAUTOINC+7055ffd37b', '2.2.1+gitAUTOINC+07f0eee', 'GPLv2 & LGPLv2.1', 'base', 'unknown', 'r3', 'pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native ', 'None', 'None', 'User interface to Ftrace', 'UPDATE', 'N/A', 'git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git;protocol=git', 'Darren Hart <dvhart@linux.intel.com>', 'None']
inserted (trace-cmd,1.2+gitAUTOINC+7055ffd37b,2.2.1+gitAUTOINC+07f0eee,GPLv2 & LGPLv2.1,base,r3,None,unknown,None,UPDATE,pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native ,User interface to Ftrace,N/A,git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git;protocol=git,Darren Hart <dvhart@linux.intel.com>)
['bigreqsproto', '1.1.2', '1.1.2', 'MIT-X', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the BIG-REQUESTS extension, used to send larger requests that usual in order to avoid fragmentation.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/bigreqsproto-1.1.2.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (bigreqsproto,1.1.2,1.1.2,MIT-X,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the BIG-REQUESTS extension, used to send larger requests that usual in order to avoid fragmentation.,N/A,http://xorg.freedesktop.org/releases/individual/proto/bigreqsproto-1.1.2.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['libomxil', '0.9.3', '0.9.3', 'LGPLv2.1+', 'base', 'http://omxil.sourceforge.net/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Bellagio OpenMAX Integration Layer', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/omxil/libomxil-bellagio-0.9.3.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libomxil,0.9.3,0.9.3,LGPLv2.1+,base,r0,None,http://omxil.sourceforge.net/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Bellagio OpenMAX Integration Layer,N/A,http://downloads.sourceforge.net/omxil/libomxil-bellagio-0.9.3.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['gcc-crosssdk', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native virtual/i586-pokysdk-linux-binutils-crosssdk virtual/nativesdk-i586-pokysdk-linux-libc-for-gcc gettext-native', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc-crosssdk,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native virtual/i586-pokysdk-linux-binutils-crosssdk virtual/nativesdk-i586-pokysdk-linux-libc-for-gcc gettext-native,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['xinit', '1.3.2', '1.3.2', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11', 'https://bugs.freedesktop.org', '1', 'The xinit program is used to start the X Window System server and a first client program on systems that cannot start X directly from /etc/init or in environments that use multiple window systems. When this first client exits, xinit will kill the X server and then terminate.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/xinit-1.3.2.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xinit,1.3.2,1.3.2,MIT-X,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11,The xinit program is used to start the X Window System server and a first client program on systems that cannot start X directly from /etc/init or in environments that use multiple window systems. When this first client exits, xinit will kill the X server and then terminate.,N/A,http://xorg.freedesktop.org/releases/individual/app/xinit-1.3.2.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gstreamer1.0', '1.0.7', '1.1.2', 'LGPLv2+', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 libxml2 bison-native flex-native', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'GStreamer is a multimedia framework for encoding and decoding video and sound. It supports a wide range of formats including mp3, ogg, avi, mpeg and quicktime.', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0,1.0.7,1.1.2,LGPLv2+,multimedia,r1,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 libxml2 bison-native flex-native,GStreamer is a multimedia framework for encoding and decoding video and sound. It supports a wide range of formats including mp3, ogg, avi, mpeg and quicktime.,N/A,http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['linuxdoc-tools-native', '0.9.69', '0.9.69', 'GPLv3+', 'base', 'http://packages.debian.org/linuxdoc-tools', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native groff-native openjade-native', 'None', 'None', 'Convert LinuxDoc SGML source into other formats', 'MATCH', '0.9.66', 'ftp://ftp.debian.org/debian/pool/main/l/linuxdoc-tools/linuxdoc-tools_0.9.69.orig.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (linuxdoc-tools-native,0.9.69,0.9.69,GPLv3+,base,r0,None,http://packages.debian.org/linuxdoc-tools,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native groff-native openjade-native,Convert LinuxDoc SGML source into other formats,0.9.66,ftp://ftp.debian.org/debian/pool/main/l/linuxdoc-tools/linuxdoc-tools_0.9.69.orig.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['initramfs-live-install-efi', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r1', ' ', 'None', 'None', 'A live image init script for grub-efi', 'MATCH', 'N/A', 'file://init-install-efi.sh', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (initramfs-live-install-efi,1.0,INVALID,MIT,base,r1,None,unknown,None,MATCH, ,A live image init script for grub-efi,N/A,file://init-install-efi.sh,Saul Wold <sgw@linux.intel.com>)
['tcf-agent', '0.4.0+gitAUTOINC+4ef94ecb92', '8.0+gitAUTOINC+e76f240', 'EPL-1.0 | EDL-1.0', 'base', 'http://wiki.eclipse.org/TCF', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-linux openssl update-rc.d-native', 'https://bugs.eclipse.org/bugs/', 'None', 'Target Communication Framework', 'UPDATE', 'N/A', 'git://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git;protocol=git', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (tcf-agent,0.4.0+gitAUTOINC+4ef94ecb92,8.0+gitAUTOINC+e76f240,EPL-1.0 | EDL-1.0,base,r2,None,http://wiki.eclipse.org/TCF,https://bugs.eclipse.org/bugs/,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-linux openssl update-rc.d-native,Target Communication Framework,N/A,git://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git;protocol=git,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['icecc-create-env-native', '0.1', 'INVALID', 'GPLv2+', 'base', 'unknown', 'r2', ' ', 'None', 'None', 'This is a modified version of the icecc-create-env script in order tomake it work with OE.', 'MATCH', 'N/A', 'file://icecc-create-env', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (icecc-create-env-native,0.1,INVALID,GPLv2+,base,r2,None,unknown,None,MATCH, ,This is a modified version of the icecc-create-env script in order tomake it work with OE.,N/A,file://icecc-create-env,Saul Wold <sgw@linux.intel.com>)
['libtirpc', '0.2.3', '0.2.3', 'BSD', 'libs/network', 'http://sourceforge.net/projects/libtirpc/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc xz-native', 'http://sourceforge.net/tracker/?group_id=183075&atid=903784', 'None', 'Libtirpc is a port of Suns Transport-Independent RPC library to Linux', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/libtirpc/libtirpc-0.2.3.tar.bz2;name=libtirpc', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libtirpc,0.2.3,0.2.3,BSD,libs/network,r0,None,http://sourceforge.net/projects/libtirpc/,http://sourceforge.net/tracker/?group_id=183075&atid=903784,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc xz-native,Libtirpc is a port of Suns Transport-Independent RPC library to Linux,N/A,http://downloads.sourceforge.net/libtirpc/libtirpc-0.2.3.tar.bz2;name=libtirpc,Cristian Iorga <cristian.iorga@intel.com>)
['findutils', '4.4.2', '4.4.2', 'GPLv3+', 'console/utils', 'http://www.gnu.org/software/findutils/', 'r6', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison-native virtual/update-alternatives', 'http://savannah.gnu.org/bugs/?group=findutils', 'None', 'The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/findutils/findutils-4.4.2.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (findutils,4.4.2,4.4.2,GPLv3+,console/utils,r6,None,http://www.gnu.org/software/findutils/,http://savannah.gnu.org/bugs/?group=findutils,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison-native virtual/update-alternatives,The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands.,N/A,ftp://ftp.gnu.org/gnu/findutils/findutils-4.4.2.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['popt', '1.16', '1.16', 'MIT', 'libs', 'http://rpm5.org/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'The popt library for parsing command line options.', 'MATCH', 'N/A', 'http://rpm5.org/files/popt/popt-1.16.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (popt,1.16,1.16,MIT,libs,r3,None,http://rpm5.org/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,The popt library for parsing command line options.,N/A,http://rpm5.org/files/popt/popt-1.16.tar.gz,Saul Wold <sgw@linux.intel.com>)
['blktool', '4-6.1', '4-6.1', 'GPLv2+', 'base', 'http://packages.debian.org/unstable/admin/blktool', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0', 'None', 'None', 'blktool is used for querying and/or changing settings of a block device. It is like hdparm but a more general tool, as it works on SCSI, IDE and SATA devices.', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/b/blktool/blktool_4.orig.tar.gz;name=tarball', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (blktool,4-6.1,4-6.1,GPLv2+,base,r1,None,http://packages.debian.org/unstable/admin/blktool,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0,blktool is used for querying and/or changing settings of a block device. It is like hdparm but a more general tool, as it works on SCSI, IDE and SATA devices.,N/A,ftp://ftp.debian.org/debian/pool/main/b/blktool/blktool_4.orig.tar.gz;name=tarball,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['kernelshark', '1.2+gitAUTOINC+7055ffd37b', '2.2.1+gitAUTOINC+07f0eee', 'GPLv2', 'base', 'unknown', 'r3', 'pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ python-native ', 'None', 'None', 'Graphical trace viewer for Ftrace', 'UPDATE', 'N/A', 'git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git;protocol=git', 'Darren Hart <dvhart@linux.intel.com>', '0.2 is the latest version.']
inserted (kernelshark,1.2+gitAUTOINC+7055ffd37b,2.2.1+gitAUTOINC+07f0eee,GPLv2,base,r3,None,unknown,None,UPDATE,pkgconfig-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ python-native ,Graphical trace viewer for Ftrace,N/A,git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git;protocol=git,Darren Hart <dvhart@linux.intel.com>)
['imake', '1.0.5', '1.0.6', 'MIT-X', 'x11/utils', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto xorg-cf-files', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'Imake is used to generate Makefiles from a template, a set of cpp macro functions, and a per-directory input file called an Imakefile. This allows machine dependencies (such as compiler options, alternate command names, and special make rules) to be kept separate from the descriptions of the various items to be built.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/util/imake-1.0.5.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (imake,1.0.5,1.0.6,MIT-X,x11/utils,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto xorg-cf-files,Imake is used to generate Makefiles from a template, a set of cpp macro functions, and a per-directory input file called an Imakefile. This allows machine dependencies (such as compiler options, alternate command names, and special make rules) to be kept separate from the descriptions of the various items to be built.,N/A,http://xorg.freedesktop.org/releases/individual/util/imake-1.0.5.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['matchbox-theme-sato', '0.1', '0.1', 'CC-BY-SA-3.0', 'x11/wm', 'http://www.matchbox-project.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc matchbox-wm', 'http://bugzilla.openedhand.com/', 'None', 'Matchbox window manager Sato themes', 'MATCH', 'N/A', 'http://pokylinux.org/releases/sato/matchbox-theme-sato-0.1.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (matchbox-theme-sato,0.1,0.1,CC-BY-SA-3.0,x11/wm,r1,None,http://www.matchbox-project.org/,http://bugzilla.openedhand.com/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc matchbox-wm,Matchbox window manager Sato themes,N/A,http://pokylinux.org/releases/sato/matchbox-theme-sato-0.1.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['gstreamer1.0-plugins-base', '1.0.7', '1.1.2', 'GPLv2+ & LGPLv2+', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 virtual/libx11 libxv freetype liboil util-linux tremor libtheora virtual/libx11 libsm libxrender libvorbis libogg alsa-lib', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer 1.x', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0-plugins-base,1.0.7,1.1.2,GPLv2+ & LGPLv2+,multimedia,r1,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 virtual/libx11 libxv freetype liboil util-linux tremor libtheora virtual/libx11 libsm libxrender libvorbis libogg alsa-lib,Plugins for GStreamer 1.x,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['docbook-sgml-dtd-3.1-native', '1.0', '31', 'OASIS', 'base', 'http://www.docbook.org/sgml/', 'r3.0', ' sgml-common-native', 'None', 'None', 'Document type definitions for verification of SGML data files against the DocBook rule set', 'UPDATE', 'N/A', 'http://www.docbook.org/sgml/3.1/docbk31.zip', 'Saul Wold <sgw@linux.intel.com>', 'PRS Reports Incorrectly']
inserted (docbook-sgml-dtd-3.1-native,1.0,31,OASIS,base,r3.0,None,http://www.docbook.org/sgml/,None,UPDATE, sgml-common-native,Document type definitions for verification of SGML data files against the DocBook rule set,N/A,http://www.docbook.org/sgml/3.1/docbk31.zip,Saul Wold <sgw@linux.intel.com>)
['fontconfig', '2.10.2', '2.10.93', 'MIT-style & MIT & PD', 'libs', 'http://www.fontconfig.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat freetype zlib', 'https://bugs.freedesktop.org/enter_bug.cgi?product=fontconfig', 'None', "Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts.", 'UPDATE', 'N/A', 'http://fontconfig.org/release/fontconfig-2.10.2.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (fontconfig,2.10.2,2.10.93,MIT-style & MIT & PD,libs,r1,None,http://www.fontconfig.org,https://bugs.freedesktop.org/enter_bug.cgi?product=fontconfig,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat freetype zlib,Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts.,N/A,http://fontconfig.org/release/fontconfig-2.10.2.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['weston-init', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r0', ' update-rc.d-native', 'None', 'None', 'startup for weston', 'MATCH', 'N/A', 'file://init', 'None', 'None']
inserted (weston-init,1.0,INVALID,MIT,base,r0,None,unknown,None,MATCH, update-rc.d-native,startup for weston,N/A,file://init,None)
['mini-x-session', '0.1', 'INVALID', 'GPLv2', 'x11', 'http://www.yoctoproject.org', 'r4', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'http://bugzilla.pokylinux.org', 'None', 'Mini X session files for poky', 'MATCH', 'N/A', 'file://mini-x-session', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (mini-x-session,0.1,INVALID,GPLv2,x11,r4,None,http://www.yoctoproject.org,http://bugzilla.pokylinux.org,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,Mini X session files for poky,N/A,file://mini-x-session,Saul Wold <sgw@linux.intel.com>)
['python-pygtk', '2.24.0', '2.24.0', 'LGPLv2.1', 'devel/python', 'unknown', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libglade python-pycairo python-pygobject python-native python python-native ', 'None', 'None', 'Python GTK+ 2.17.x Bindings', 'MATCH', 'N/A', 'ftp://ftp.gnome.org/pub/gnome/sources/pygtk/2.24/pygtk-2.24.0.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (python-pygtk,2.24.0,2.24.0,LGPLv2.1,devel/python,r1,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libglade python-pycairo python-pygobject python-native python python-native ,Python GTK+ 2.17.x Bindings,N/A,ftp://ftp.gnome.org/pub/gnome/sources/pygtk/2.24/pygtk-2.24.0.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['gnome-desktop', '2.32.1', '3.9.1.1', 'GPLv2 & LGPLv2', 'x11/gnome', 'unknown', 'r6', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf libxrandr virtual/libx11 gtk+ glib-2.0 gnome-doc-utils startup-notification gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info', 'None', 'None', 'GNOME library for reading .desktop files', 'UPDATE', '3.7.90', 'http://ftp.gnome.org/pub/GNOME/sources/gnome-desktop/2.32/gnome-desktop-2.32.1.tar.bz2;name=archive', 'Constantin Musca <constantinx.musca@intel.com>', 'waiting for the sato gtk3 port']
inserted (gnome-desktop,2.32.1,3.9.1.1,GPLv2 & LGPLv2,x11/gnome,r6,None,unknown,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gconf libxrandr virtual/libx11 gtk+ glib-2.0 gnome-doc-utils startup-notification gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info,GNOME library for reading .desktop files,3.7.90,http://ftp.gnome.org/pub/GNOME/sources/gnome-desktop/2.32/gnome-desktop-2.32.1.tar.bz2;name=archive,Constantin Musca <constantinx.musca@intel.com>)
['ethtool', '3.10', '3.10', 'GPLv2+', 'console/network', 'http://www.kernel.org/pub/software/network/ethtool/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A small utility for examining and tuning the settings of your ethernet-based network interfaces.', 'MATCH', 'N/A', 'http://kernel.org/pub/software/network/ethtool/ethtool-3.10.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (ethtool,3.10,3.10,GPLv2+,console/network,r0,None,http://www.kernel.org/pub/software/network/ethtool/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A small utility for examining and tuning the settings of your ethernet-based network interfaces.,N/A,http://kernel.org/pub/software/network/ethtool/ethtool-3.10.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['recordproto', '1.14.2', '1.14.2', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the X Record extension. This extension is used to record and play back event sequences.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/recordproto-1.14.2.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (recordproto,1.14.2,1.14.2,MIT-style,x11/libs,r1,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the X Record extension. This extension is used to record and play back event sequences.,N/A,http://xorg.freedesktop.org/releases/individual/proto/recordproto-1.14.2.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['freetype', '2.4.12', '2.5.0', 'FreeType | GPLv2+', 'libs', 'http://www.freetype.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'https://savannah.nongnu.org/bugs/?group=freetype', 'None', 'FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images). It can be used in graphics libraries, display servers, font conversion tools, text image generation tools, and many other products as well.', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/freetype/freetype-2.4.12.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (freetype,2.4.12,2.5.0,FreeType | GPLv2+,libs,r0,None,http://www.freetype.org/,https://savannah.nongnu.org/bugs/?group=freetype,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images). It can be used in graphics libraries, display servers, font conversion tools, text image generation tools, and many other products as well.,N/A,http://downloads.sourceforge.net/freetype/freetype-2.4.12.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['rpmresolve', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc rpm', 'None', 'None', 'OpenEmbedded RPM resolver - performs RPM database lookups in batches to avoid repeated invocations of rpm on the command line.', 'MATCH', 'N/A', 'file://rpmresolve.c', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (rpmresolve,1.0,INVALID,GPLv2,base,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc rpm,OpenEmbedded RPM resolver - performs RPM database lookups in batches to avoid repeated invocations of rpm on the command line.,N/A,file://rpmresolve.c,Saul Wold <sgw@linux.intel.com>)
['createrepo', '0.4.11', '0.9.9', 'GPLv2+', 'base', 'http://createrepo.baseurl.org/', 'r9', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'createrepo creates rpm-metadata for rpms to build the repository', 'UPDATE', 'N/A', 'http://createrepo.baseurl.org/download/createrepo-0.4.11.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'Versions after 0.9.* use YUM, so we hold at 0.4.11']
inserted (createrepo,0.4.11,0.9.9,GPLv2+,base,r9,None,http://createrepo.baseurl.org/,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,createrepo creates rpm-metadata for rpms to build the repository,N/A,http://createrepo.baseurl.org/download/createrepo-0.4.11.tar.gz,Saul Wold <sgw@linux.intel.com>)
['db', '5.3.21', '6.0.20', 'Sleepycat', 'libs', 'http://www.oracle.com/technology/products/berkeley-db/db/index.html', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Berkeley DB v5.', 'UPDATE', 'N/A', 'http://download.oracle.com/berkeley-db/db-5.3.21.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'API compatibility issue']
inserted (db,5.3.21,6.0.20,Sleepycat,libs,r0,None,http://www.oracle.com/technology/products/berkeley-db/db/index.html,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Berkeley DB v5.,N/A,http://download.oracle.com/berkeley-db/db-5.3.21.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['cpio', '2.11', '2.11', 'GPLv3', 'base', 'http://www.gnu.org/software/cpio/', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc texinfo-native virtual/update-alternatives', 'None', 'None', 'GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/cpio/cpio-2.11.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (cpio,2.11,2.11,GPLv3,base,r4,None,http://www.gnu.org/software/cpio/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc texinfo-native virtual/update-alternatives,GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files.,N/A,ftp://ftp.gnu.org/gnu/cpio/cpio-2.11.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['ocf-linux', '20120127', '20120127', 'BSD', 'base', 'unknown', 'r3.0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Install required headers to enable OCF Linux support', 'MATCH', 'N/A', 'http://sourceforge.net/projects/ocf-linux/files/ocf-linux/20120127/ocf-linux-20120127.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (ocf-linux,20120127,20120127,BSD,base,r3.0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Install required headers to enable OCF Linux support,N/A,http://sourceforge.net/projects/ocf-linux/files/ocf-linux/20120127/ocf-linux-20120127.tar.gz,Saul Wold <sgw@linux.intel.com>)
['liboil', '0.3.17', '0.3.17', 'BSD', 'base', 'http://liboil.freedesktop.org/', 'r5', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0', 'https://bugs.freedesktop.org/', 'None', 'Liboil is a library of simple functions that are optimized for various CPUs.', 'MATCH', 'N/A', 'http://liboil.freedesktop.org/download/liboil-0.3.17.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (liboil,0.3.17,0.3.17,BSD,base,r5,None,http://liboil.freedesktop.org/,https://bugs.freedesktop.org/,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0,Liboil is a library of simple functions that are optimized for various CPUs.,N/A,http://liboil.freedesktop.org/download/liboil-0.3.17.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['jpeg', '8d', '9', 'BSD-3-Clause', 'libs', 'http://www.ijg.org/', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-cross', '', 'None', 'libjpeg contains a library for handling the JPEG (JFIF) image format, as well as related programs for accessing the libjpeg functions.', 'UPDATE', '9', 'http://www.ijg.org/files/jpegsrc.v8d.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', "webkit-gtk 1.8.3 doesn't work with jpeg 9"]
inserted (jpeg,8d,9,BSD-3-Clause,libs,r1,None,http://www.ijg.org/,,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtool-cross,libjpeg contains a library for handling the JPEG (JFIF) image format, as well as related programs for accessing the libjpeg functions.,9,http://www.ijg.org/files/jpegsrc.v8d.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['python-async', '0.6.1', '0.6.1', 'BSD', 'devel/python', 'http://github.com/gitpython-developers/async', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native ', 'None', 'None', 'Python framework to process interdependent tasks in a pool of workers', 'MATCH', 'N/A', 'http://pypi.python.org/packages/source/a/async/async-0.6.1.tar.gz', 'None', 'None']
inserted (python-async,0.6.1,0.6.1,BSD,devel/python,r0,None,http://github.com/gitpython-developers/async,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc python-native python python-native ,Python framework to process interdependent tasks in a pool of workers,N/A,http://pypi.python.org/packages/source/a/async/async-0.6.1.tar.gz,None)
['prelink', '1.0+gitAUTOINC+4e313edb12', 'cross.prelink+gitAUTOINC+e785bc0', 'GPLv2', 'devel', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc elfutils binutils', 'None', 'None', 'The prelink package contains a utility which modifies ELF shared libraries and executables, so that far fewer relocations need to be resolved at runtime and thus programs come up faster.', 'UPDATE', '1.0+git1+9552f214c7faa816fdb55b289a457f0cab034f00', 'git://git.yoctoproject.org/prelink-cross.git;protocol=git', 'Mark Hatle <mark.hatle@windriver.com>', 'None']
inserted (prelink,1.0+gitAUTOINC+4e313edb12,cross.prelink+gitAUTOINC+e785bc0,GPLv2,devel,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc elfutils binutils,The prelink package contains a utility which modifies ELF shared libraries and executables, so that far fewer relocations need to be resolved at runtime and thus programs come up faster.,1.0+git1+9552f214c7faa816fdb55b289a457f0cab034f00,git://git.yoctoproject.org/prelink-cross.git;protocol=git,Mark Hatle <mark.hatle@windriver.com>)
['alsa-state', '0.2.0', 'INVALID', 'MIT', 'base', 'unknown', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native', 'None', 'None', 'Alsa Scenario Files - an init script and state files to restore sound state at system boot and save it at system shut down.', 'MATCH', 'N/A', 'file://asound.conf', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (alsa-state,0.2.0,INVALID,MIT,base,r3,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native,Alsa Scenario Files - an init script and state files to restore sound state at system boot and save it at system shut down.,N/A,file://asound.conf,Cristian Iorga <cristian.iorga@intel.com>)
['xf86driproto', '2.1.1', '2.1.1', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'This package provides the wire protocol for the XFree86 Direct Rendering Infrastructure extension. The XFree86-DRI extension is used to organize direct rendering support or 3D clients and help arbitrate requests.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/proto/xf86driproto-2.1.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86driproto,2.1.1,2.1.1,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,This package provides the wire protocol for the XFree86 Direct Rendering Infrastructure extension. The XFree86-DRI extension is used to organize direct rendering support or 3D clients and help arbitrate requests.,N/A,http://xorg.freedesktop.org/releases/individual/proto/xf86driproto-2.1.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libdaemon', '0.14', '0.14', 'LGPLv2.1+', 'libs', 'http://0pointer.de/lennart/projects/libdaemon/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'libdaemon is a lightweight C library which eases the writing of UNIX daemons.', 'MATCH', 'N/A', 'http://0pointer.de/lennart/projects/libdaemon/libdaemon-0.14.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libdaemon,0.14,0.14,LGPLv2.1+,libs,r0,None,http://0pointer.de/lennart/projects/libdaemon/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,libdaemon is a lightweight C library which eases the writing of UNIX daemons.,N/A,http://0pointer.de/lennart/projects/libdaemon/libdaemon-0.14.tar.gz,Saul Wold <sgw@linux.intel.com>)
['gnome-icon-theme', '2.31.0', '3.8.2', 'LGPLv3+ | CC-BY-SA-3.0', 'x11/gnome', 'http://www.gnome.org/', 'r5', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icon-naming-utils-native glib-2.0 intltool-native libxml-simple-perl-native perl-native hicolor-icon-theme gtk-update-icon-cache-native', 'https://bugzilla.gnome.org/', 'None', 'GNOME 2 default icon themes', 'UPDATE', '3.7.4', 'http://ftp.gnome.org/pub/GNOME/sources/gnome-icon-theme/2.31/gnome-icon-theme-2.31.0.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'waiting for the sato gtk3 port']
inserted (gnome-icon-theme,2.31.0,3.8.2,LGPLv3+ | CC-BY-SA-3.0,x11/gnome,r5,None,http://www.gnome.org/,https://bugzilla.gnome.org/,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc icon-naming-utils-native glib-2.0 intltool-native libxml-simple-perl-native perl-native hicolor-icon-theme gtk-update-icon-cache-native,GNOME 2 default icon themes,3.7.4,http://ftp.gnome.org/pub/GNOME/sources/gnome-icon-theme/2.31/gnome-icon-theme-2.31.0.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libxcalibrate', '0.0+gitAUTOINC+209d83af61', '0.0+gitAUTOINC+209d83a', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 calibrateproto libxext', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', 'None', 'libXCalibrate is a library for performing touchscreen calibration with the kdrive tslib touchscreen driver.', 'MATCH', 'N/A', 'git://anongit.freedesktop.org/git/xorg/lib/libXCalibrate;protocol=git', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxcalibrate,0.0+gitAUTOINC+209d83af61,0.0+gitAUTOINC+209d83a,MIT-style,x11/libs,r0,None,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/libx11 calibrateproto libxext,libXCalibrate is a library for performing touchscreen calibration with the kdrive tslib touchscreen driver.,N/A,git://anongit.freedesktop.org/git/xorg/lib/libXCalibrate;protocol=git,Constantin Musca <constantinx.musca@intel.com>)
['libxml-namespacesupport-perl', '1.11', '1.11', 'Artistic-1.0 | GPL-1.0+', 'libs', 'unknown', 'r3', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native', 'None', 'None', 'XML::NamespaceSupport offers a simple way to process namespace-based XML names. It also helps maintain a prefix-to-namespace URI map, and provides a number of basic checks. ', 'MATCH', 'N/A', 'http://search.cpan.org/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libxml-namespacesupport-perl,1.11,1.11,Artistic-1.0 | GPL-1.0+,libs,r3,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc perl perl-native,XML::NamespaceSupport offers a simple way to process namespace-based XML names. It also helps maintain a prefix-to-namespace URI map, and provides a number of basic checks. ,N/A,http://search.cpan.org/CPAN/authors/id/P/PE/PERIGRIN/XML-NamespaceSupport-1.11.tar.gz,Saul Wold <sgw@linux.intel.com>)
['adt-installer', '0.1.8+svnr596', '0.1.8+svnr650', 'MIT', 'base', 'unknown', 'r11', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Meta package for creating sdk installer tarball', 'UPDATE', '1.1', 'svn://opkg.googlecode.com/svn;module=trunk;protocol=http', 'Jessica Zhang <jessica.zhang@intel.com>', 'None']
inserted (adt-installer,0.1.8+svnr596,0.1.8+svnr650,MIT,base,r11,None,unknown,None,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Meta package for creating sdk installer tarball,1.1,svn://opkg.googlecode.com/svn;module=trunk;protocol=http,Jessica Zhang <jessica.zhang@intel.com>)
['liberation-fonts', '1.04', '1.05.2.20091019', 'GPLv2', 'x11/fonts', 'https://fedorahosted.org/liberation-fonts/', 'r4', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native', 'https://bugzilla.redhat.com/', '1', 'The Liberation(tm) Fonts is a font family originally created by Ascender(c) which aims at metric compatibility with Arial, Times New Roman, Courier New.', 'UPDATE', 'N/A', 'https://fedorahosted.org/releases/l/i/liberation-fonts/liberation-fonts-1.04.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', '2.00.0 - fontforge package required ']
inserted (liberation-fonts,1.04,1.05.2.20091019,GPLv2,x11/fonts,r4,1,https://fedorahosted.org/liberation-fonts/,https://bugzilla.redhat.com/,UPDATE, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native,The Liberation(tm) Fonts is a font family originally created by Ascender(c) which aims at metric compatibility with Arial, Times New Roman, Courier New.,N/A,https://fedorahosted.org/releases/l/i/liberation-fonts/liberation-fonts-1.04.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['patch', '2.7.1', '2.7.1', 'GPLv3', 'utils', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr virtual/update-alternatives', 'None', 'None', 'patch takes a patch file containing a difference listing produced by the diff program and applies those differences to one or more original files, producing patched versions.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/patch/patch-2.7.1.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (patch,2.7.1,2.7.1,GPLv3,utils,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc attr virtual/update-alternatives,patch takes a patch file containing a difference listing produced by the diff program and applies those differences to one or more original files, producing patched versions.,N/A,ftp://ftp.gnu.org/gnu/patch/patch-2.7.1.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['rt-tests', '0.85', '0.85', 'GPLv2 & GPLv2+', 'tests', 'https://rt.wiki.kernel.org/index.php/Cyclictest', 'r2.0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc linux-libc-headers virtual/libc', 'None', 'None', 'Real-Time preemption testcases', 'ErrUnknown:git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git', 'N/A', 'git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git', 'Darren Hart <dvhart@linux.intel.com>', 'None']
inserted (rt-tests,0.85,0.85,GPLv2 & GPLv2+,tests,r2.0,None,https://rt.wiki.kernel.org/index.php/Cyclictest,None,ErrUnknown:git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc linux-libc-headers virtual/libc,Real-Time preemption testcases,N/A,git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git,Darren Hart <dvhart@linux.intel.com>)
['gst-plugin-bluetooth', '4.101', '5.7', 'GPLv2+ & LGPLv2.1+', 'libs', 'http://www.bluez.org', 'r1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bluez4 gst-plugins-base alsa-lib', 'None', 'None', 'Linux Bluetooth stack V4 userland components. These include a system configurations, daemons, tools and system libraries.', 'UPDATE', 'N/A', 'http://kernel.org/pub/linux/bluetooth/bluez-4.101.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gst-plugin-bluetooth,4.101,5.7,GPLv2+ & LGPLv2.1+,libs,r1,None,http://www.bluez.org,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bluez4 gst-plugins-base alsa-lib,Linux Bluetooth stack V4 userland components. These include a system configurations, daemons, tools and system libraries.,N/A,http://kernel.org/pub/linux/bluetooth/bluez-4.101.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['distcc-config', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Sets up distcc for compilation on the target device', 'MATCH', 'N/A', 'file://distcc.sh', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (distcc-config,1.0,INVALID,MIT,base,r0,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Sets up distcc for compilation on the target device,N/A,file://distcc.sh,Saul Wold <sgw@linux.intel.com>)
['net-tools', '1.60-24.2', '1.60-25', 'GPLv2+', 'base', 'http://net-tools.berlios.de/', 'r0', 'virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'http://bugs.debian.org/net-tools', 'None', 'A collection of programs that form the base set of the NET-3 networking distribution for the Linux operating system', 'UPDATE', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60.orig.tar.gz;name=tarball', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (net-tools,1.60-24.2,1.60-25,GPLv2+,base,r0,None,http://net-tools.berlios.de/,http://bugs.debian.org/net-tools,UPDATE,virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,A collection of programs that form the base set of the NET-3 networking distribution for the Linux operating system,N/A,ftp://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60.orig.tar.gz;name=tarball,Cristian Iorga <cristian.iorga@intel.com>)
['lttng-ust', '2.2.0', '2.3.0', 'LGPLv2.1+ & BSD & GPLv2', 'base', 'http://lttng.org/ust', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc liburcu util-linux', 'https://bugs.lttng.org/projects/lttng-ust', '2', 'The LTTng UST 2.0 package contains the userspace tracer library to trace userspace codes.', 'ErrUnknown:git.lttng.org/lttng-ust.git', 'N/A', 'git://git.lttng.org/lttng-ust.git;protocol=git', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (lttng-ust,2.2.0,2.3.0,LGPLv2.1+ & BSD & GPLv2,base,r0,2,http://lttng.org/ust,https://bugs.lttng.org/projects/lttng-ust,ErrUnknown:git.lttng.org/lttng-ust.git,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc liburcu util-linux,The LTTng UST 2.0 package contains the userspace tracer library to trace userspace codes.,N/A,git://git.lttng.org/lttng-ust.git;protocol=git,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libvorbis', '1.3.3', '1.3.3', 'BSD', 'libs', 'http://xiph.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg', 'https://trac.xiph.org/newticket', 'None', 'Ogg Vorbis is a high-quality lossy audio codec that is free of intellectual property restrictions. libvorbis is the main vorbis codec library.', 'MATCH', 'N/A', 'http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.3.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libvorbis,1.3.3,1.3.3,BSD,libs,r1,None,http://xiph.org/,https://trac.xiph.org/newticket,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libogg,Ogg Vorbis is a high-quality lossy audio codec that is free of intellectual property restrictions. libvorbis is the main vorbis codec library.,N/A,http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.3.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['enchant', '1.6.0', '1.6.0', 'LGPLv2.1+', 'libs', 'http://www.abisource.com/projects/enchant/', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc aspell glib-2.0', 'http://bugzilla.abisource.com/enter_bug.cgi?product=Enchant', 'None', 'Enchant Spell checker API Library', 'MATCH', 'N/A', 'http://www.abisource.com/downloads/enchant/1.6.0/enchant-1.6.0.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (enchant,1.6.0,1.6.0,LGPLv2.1+,libs,r3,None,http://www.abisource.com/projects/enchant/,http://bugzilla.abisource.com/enter_bug.cgi?product=Enchant,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc aspell glib-2.0,Enchant Spell checker API Library,N/A,http://www.abisource.com/downloads/enchant/1.6.0/enchant-1.6.0.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['rpcbind', '0.2.0', '0.2.0', 'BSD', 'console/network', 'http://sourceforge.net/projects/rpcbind/', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtirpc quota update-rc.d-native tcp-wrappers', 'http://sourceforge.net/tracker/?group_id=201237&atid=976751', 'None', 'The rpcbind utility is a server that converts RPC program numbers into universal addresses.', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/rpcbind/rpcbind-0.2.0.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (rpcbind,0.2.0,0.2.0,BSD,console/network,r4,None,http://sourceforge.net/projects/rpcbind/,http://sourceforge.net/tracker/?group_id=201237&atid=976751,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libtirpc quota update-rc.d-native tcp-wrappers,The rpcbind utility is a server that converts RPC program numbers into universal addresses.,N/A,http://downloads.sourceforge.net/rpcbind/rpcbind-0.2.0.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['connman-conf', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'This is the ConnMan configuration to set up a Wired network interface for a qemu machine.', 'MATCH', 'N/A', 'file://wired.config', 'None', 'None']
inserted (connman-conf,1.0,INVALID,GPLv2,base,r2,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,This is the ConnMan configuration to set up a Wired network interface for a qemu machine.,N/A,file://wired.config,None)
['guilt-native', '0.33', '0.35', 'GPLv2', 'base', 'unknown', 'r4', ' ', 'None', 'None', 'guilt is quilt like tool for git', 'UPDATE', 'N/A', 'http://ftp.de.debian.org/debian/pool/main/g/guilt/guilt_0.33.orig.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (guilt-native,0.33,0.35,GPLv2,base,r4,None,unknown,None,UPDATE, ,guilt is quilt like tool for git,N/A,http://ftp.de.debian.org/debian/pool/main/g/guilt/guilt_0.33.orig.tar.gz,Saul Wold <sgw@linux.intel.com>)
['xf86-input-vmmouse', '13.0.0', '13.0.0', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r21.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ', 'https://bugs.freedesktop.org', '2', 'X.Org X server -- VMWare mouse input driver', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-input-vmmouse-13.0.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-input-vmmouse,13.0.0,13.0.0,MIT-X,x11/drivers,r21.0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto ,X.Org X server -- VMWare mouse input driver,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-input-vmmouse-13.0.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libpciaccess', '0.13.1', '0.13.2', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', 'None', 'libpciaccess provides functionality for X to access the PCI bus and devices in a platform-independent way.', 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libpciaccess-0.13.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (libpciaccess,0.13.1,0.13.2,MIT & MIT-style,x11/libs,r1,None,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,libpciaccess provides functionality for X to access the PCI bus and devices in a platform-independent way.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libpciaccess-0.13.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['sed', '4.2.2', '4.2.2', 'GPLv3+', 'console/utils', 'http://www.gnu.org/software/sed/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'sed is a Stream EDitor.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/sed/sed-4.2.2.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (sed,4.2.2,4.2.2,GPLv3+,console/utils,r0,None,http://www.gnu.org/software/sed/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,sed is a Stream EDitor.,N/A,ftp://ftp.gnu.org/gnu/sed/sed-4.2.2.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['initramfs-live-boot', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r11', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel', 'None', 'None', 'A live image init script', 'MATCH', 'N/A', 'file://init-live.sh', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (initramfs-live-boot,1.0,INVALID,MIT,base,r11,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/kernel,A live image init script,N/A,file://init-live.sh,Saul Wold <sgw@linux.intel.com>)
['setserial', '2.17', '2.17', 'GPLv2.0', 'console/utils', 'http://setserial.sourceforge.net', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'setserial is a program designed to set and/or report the configuration information associated with a serial port', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/setserial/setserial-2.17.tar.gz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (setserial,2.17,2.17,GPLv2.0,console/utils,r3,None,http://setserial.sourceforge.net,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,setserial is a program designed to set and/or report the configuration information associated with a serial port,N/A,http://downloads.sourceforge.net/setserial/setserial-2.17.tar.gz,Radu Moisan <radu.moisan@intel.com>)
['gst-fluendo-mp3', '0.10.19', '0.10.22', 'MIT', 'multimedia', 'http://www.fluendo.com/resources/source-plugins.php', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer zlib', 'None', 'None', 'Fluendo closed-format mp3 GStreamer plug-in', 'UPDATE', 'N/A', 'http://core.fluendo.com/gstreamer/src/gst-fluendo-mp3/gst-fluendo-mp3-0.10.19.tar.bz2', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gst-fluendo-mp3,0.10.19,0.10.22,MIT,multimedia,r0,None,http://www.fluendo.com/resources/source-plugins.php,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer zlib,Fluendo closed-format mp3 GStreamer plug-in,N/A,http://core.fluendo.com/gstreamer/src/gst-fluendo-mp3/gst-fluendo-mp3-0.10.19.tar.bz2,Cristian Iorga <cristian.iorga@intel.com>)
['mdadm', '3.2.6', '3.2.6', 'GPLv2 & GPLv2+', 'base', 'http://www.kernel.org/pub/linux/utils/raid/mdadm/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'n/a', 'None', ' A tool for managing Soft RAID under Linux', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/utils/raid/mdadm/mdadm-3.2.6.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (mdadm,3.2.6,3.2.6,GPLv2 & GPLv2+,base,r0,None,http://www.kernel.org/pub/linux/utils/raid/mdadm/,n/a,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc , A tool for managing Soft RAID under Linux,N/A,http://kernel.org/pub/linux/utils/raid/mdadm/mdadm-3.2.6.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['gtk-doc-stub', '0.0+gitAUTOINC+3dfd0a09de', '0.0+gitAUTOINC+3dfd0a0', 'GPLv2', 'x11/base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', "Stub implementation of gtk-doc, as we don't want to build the API documentation", 'MATCH', 'N/A', 'git://git.gnome.org/gtk-doc-stub;protocol=git', 'Saul Wold <sgw@linux.intel.com>', 'PRS Reports Incorrectly']
inserted (gtk-doc-stub,0.0+gitAUTOINC+3dfd0a09de,0.0+gitAUTOINC+3dfd0a0,GPLv2,x11/base,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Stub implementation of gtk-doc, as we don't want to build the API documentation,N/A,git://git.gnome.org/gtk-doc-stub;protocol=git,Saul Wold <sgw@linux.intel.com>)
['libxau', '1.0.8', '1.0.8', 'MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libxau provides the main interfaces to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXau-1.0.8.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxau,1.0.8,1.0.8,MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros xproto,libxau provides the main interfaces to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXau-1.0.8.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['libaio', '0.3.109', '0.3.109', 'LGPLv2.1+', 'base', 'http://lse.sourceforge.net/io/aio.html', 'r2', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Asynchronous input/output library that uses the kernels native interface', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/liba/libaio/libaio_0.3.109.orig.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libaio,0.3.109,0.3.109,LGPLv2.1+,base,r2,None,http://lse.sourceforge.net/io/aio.html,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Asynchronous input/output library that uses the kernels native interface,N/A,ftp://ftp.debian.org/debian/pool/main/liba/libaio/libaio_0.3.109.orig.tar.gz,Saul Wold <sgw@linux.intel.com>)
['kmod', '9+gitAUTOINC+62081c0f68', '14+gitAUTOINC+b3e19ce', 'GPL-2.0+ & LGPL-2.1+', 'base', 'http://packages.profusion.mobi/kmod/', 'r0.0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pkgconfig-native gtk-doc-stub-native virtual/update-alternatives', 'None', 'None', 'kmod is a set of tools to handle common tasks with Linux kernel modules like insert, remove, list, check properties, resolve dependencies and aliases.', 'UPDATE', '9', 'git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (kmod,9+gitAUTOINC+62081c0f68,14+gitAUTOINC+b3e19ce,GPL-2.0+ & LGPL-2.1+,base,r0.0,None,http://packages.profusion.mobi/kmod/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pkgconfig-native gtk-doc-stub-native virtual/update-alternatives,kmod is a set of tools to handle common tasks with Linux kernel modules like insert, remove, list, check properties, resolve dependencies and aliases.,9,git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git,Radu Moisan <radu.moisan@intel.com>)
['help2man-native', '1.43.3', '1.43.3', 'GPLv3', 'devel', 'unknown', 'r0', ' autoconf-native automake-native', 'None', 'None', 'Program to create simple man pages', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/help2man/help2man-1.43.3.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (help2man-native,1.43.3,1.43.3,GPLv3,devel,r0,None,unknown,None,MATCH, autoconf-native automake-native,Program to create simple man pages,N/A,ftp://ftp.gnu.org/gnu/help2man/help2man-1.43.3.tar.gz,Saul Wold <sgw@linux.intel.com>)
['mkfontdir', '1.0.7', '1.0.7', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11', 'https://bugs.freedesktop.org', '1', 'For each directory argument, mkfontdir reads all of the font files in the directory. The font names and related data are written out to the files \\"fonts.dir\\", \\"fonts.scale\\", and \\"fonts.alias\\". The X server and font server use these files to find the available font files.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/mkfontdir-1.0.7.tar.bz2', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (mkfontdir,1.0.7,1.0.7,MIT-X,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11,For each directory argument, mkfontdir reads all of the font files in the directory. The font names and related data are written out to the files \"fonts.dir\", \"fonts.scale\", and \"fonts.alias\". The X server and font server use these files to find the available font files.,N/A,http://xorg.freedesktop.org/releases/individual/app/mkfontdir-1.0.7.tar.bz2,Radu Moisan <radu.moisan@intel.com>)
['ubootchart', '0.0+r12', '12', 'GPLv3', 'base', 'http://code.google.com/p/ubootchart/', 'r6', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives', 'None', 'None', 'A boot profiling tool', 'MATCH', '0.0+r12', 'svn://ubootchart.googlecode.com/svn/;protocol=http;module=trunk', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (ubootchart,0.0+r12,12,GPLv3,base,r6,None,http://code.google.com/p/ubootchart/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/update-alternatives,A boot profiling tool,0.0+r12,svn://ubootchart.googlecode.com/svn/;protocol=http;module=trunk,Radu Moisan <radu.moisan@intel.com>)
['libpng', '1.6.2', '1.6.3', 'Libpng', 'libs', 'http://www.libpng.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib', 'None', 'None', 'PNG Library', 'UPDATE', 'N/A', 'http://downloads.sourceforge.net/project/libpng/libpng16/1.6.2/libpng-1.6.2.tar.xz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', '1.4.3 and later changes the API and breaks libmatchbox. Sticking with the 1.2.x series instead']
inserted (libpng,1.6.2,1.6.3,Libpng,libs,r0,None,http://www.libpng.org/,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib,PNG Library,N/A,http://downloads.sourceforge.net/project/libpng/libpng16/1.6.2/libpng-1.6.2.tar.xz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['xdg-utils', '1.1.0-rc1', '1.0.2', 'MIT', 'base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'The xdg-utils package is a set of simple scripts that provide basic desktop integration functions for any Free Desktop, such as Linux. They are intended to provide a set of defacto standards. The following scripts are provided at this time: xdg-desktop-icon xdg-desktop-menu xdg-email xdg-icon-resource xdg-mime xdg-open xdg-screensaver ', 'UPDATE', 'N/A', 'http://portland.freedesktop.org/download/xdg-utils-1.1.0-rc1.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'only release candidates available ']
inserted (xdg-utils,1.1.0-rc1,1.0.2,MIT,base,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,The xdg-utils package is a set of simple scripts that provide basic desktop integration functions for any Free Desktop, such as Linux. They are intended to provide a set of defacto standards. The following scripts are provided at this time: xdg-desktop-icon xdg-desktop-menu xdg-email xdg-icon-resource xdg-mime xdg-open xdg-screensaver ,N/A,http://portland.freedesktop.org/download/xdg-utils-1.1.0-rc1.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['msmtp', '1.4.31', '1.4.31', 'GPLv3', 'console/network', 'http://msmtp.sourceforge.net/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib gnutls virtual/update-alternatives', 'None', 'None', 'A sendmail replacement for use in MTAs like mutt', 'MATCH', 'N/A', 'http://sourceforge.net/projects/msmtp/files/msmtp/1.4.31/msmtp-1.4.31.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (msmtp,1.4.31,1.4.31,GPLv3,console/network,r0,None,http://msmtp.sourceforge.net/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc zlib gnutls virtual/update-alternatives,A sendmail replacement for use in MTAs like mutt,N/A,http://sourceforge.net/projects/msmtp/files/msmtp/1.4.31/msmtp-1.4.31.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['systemtap', '2.1+gitAUTOINC+addec813fe', '2.2.1+gitAUTOINC+0589021', 'GPLv2', 'base', 'unknown', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc elfutils sqlite3 systemtap-native', 'None', 'None', 'SystemTap - script-directed dynamic tracing and performance analysis tool for Linux', 'UPDATE', 'N/A', 'git://sourceware.org/git/systemtap.git;protocol=git', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (systemtap,2.1+gitAUTOINC+addec813fe,2.2.1+gitAUTOINC+0589021,GPLv2,base,r1,None,unknown,None,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc elfutils sqlite3 systemtap-native,SystemTap - script-directed dynamic tracing and performance analysis tool for Linux,N/A,git://sourceware.org/git/systemtap.git;protocol=git,Radu Moisan <radu.moisan@intel.com>)
['gnupg', '2.0.20', '2.0.20', 'GPLv3 & LGPLv3', 'base', 'http://www.gnupg.org/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pth libassuan libksba zlib bzip2 readline libgcrypt', 'None', 'None', 'GNU privacy guard - a free PGP replacement (new v2.x)', 'MATCH', 'N/A', 'ftp://ftp.gnupg.org/gcrypt/gnupg/gnupg-2.0.20.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (gnupg,2.0.20,2.0.20,GPLv3 & LGPLv3,base,r0,None,http://www.gnupg.org/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc pth libassuan libksba zlib bzip2 readline libgcrypt,GNU privacy guard - a free PGP replacement (new v2.x),N/A,ftp://ftp.gnupg.org/gcrypt/gnupg/gnupg-2.0.20.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['screen', '4.0.3', '4.0.3', 'GPLv2+', 'console/utils', 'http://www.gnu.org/software/screen/', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses ', 'https://savannah.gnu.org/bugs/?func=additem&group=screen', 'None', 'Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/screen/screen-4.0.3.tar.gz;name=tarball', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (screen,4.0.3,4.0.3,GPLv2+,console/utils,r3,None,http://www.gnu.org/software/screen/,https://savannah.gnu.org/bugs/?func=additem&group=screen,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses ,Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells.,N/A,ftp://ftp.gnu.org/gnu/screen/screen-4.0.3.tar.gz;name=tarball,Constantin Musca <constantinx.musca@intel.com>)
['initramfs-boot', '1.0', 'INVALID', 'MIT', 'base', 'unknown', 'r2', ' ', 'None', 'None', 'A live image init script', 'MATCH', 'N/A', 'file://init-boot.sh', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (initramfs-boot,1.0,INVALID,MIT,base,r2,None,unknown,None,MATCH, ,A live image init script,N/A,file://init-boot.sh,Saul Wold <sgw@linux.intel.com>)
['js', '1.7.0+1.8.0rc1', '185-1.0.0', 'MPL-1 | GPLv2+ | LGPLv2.1+', 'libs', 'http://www.mozilla.org/js/spidermonkey/', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Spidermonkey: a javascript engine written in C', 'UPDATE', 'N/A', 'http://ftp.mozilla.org/pub/mozilla.org/js/js-1.8.0-rc1.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (js,1.7.0+1.8.0rc1,185-1.0.0,MPL-1 | GPLv2+ | LGPLv2.1+,libs,r4,None,http://www.mozilla.org/js/spidermonkey/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Spidermonkey: a javascript engine written in C,N/A,http://ftp.mozilla.org/pub/mozilla.org/js/js-1.8.0-rc1.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['hwlatdetect', '0.85', '0.85', 'GPLv2', 'tests', 'http://git.kernel.org/?p=linux/kernel/git/clrkwllms/rt-tests.git', 'r2.0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Python utility for controlling the kernel hardware latency detection module (hwlat_detector.ko).', 'ErrUnknown:git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git', 'N/A', 'git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git', 'Darren Hart <dvhart@linux.intel.com>', 'None']
inserted (hwlatdetect,0.85,0.85,GPLv2,tests,r2.0,None,http://git.kernel.org/?p=linux/kernel/git/clrkwllms/rt-tests.git,None,ErrUnknown:git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Python utility for controlling the kernel hardware latency detection module (hwlat_detector.ko).,N/A,git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git,Darren Hart <dvhart@linux.intel.com>)
['gstreamer1.0-plugins-ugly', '1.0.7', '1.1.2', 'GPLv2+ & LGPLv2.1+ & LGPLv2+', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base libid3tag lame mpeg2dec liba52 libmad', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer 1.x', 'UPDATE', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.0.7.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (gstreamer1.0-plugins-ugly,1.0.7,1.1.2,GPLv2+ & LGPLv2.1+ & LGPLv2+,multimedia,r1,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer1.0 gstreamer1.0-plugins-base libid3tag lame mpeg2dec liba52 libmad,Plugins for GStreamer 1.x,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-ugly/gst-plugins-ugly-1.0.7.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['qt-demo-init', '0.1', 'INVALID', 'MIT', 'base', 'unknown', 'r3', ' update-rc.d-native', 'None', 'None', 'Init script for qtdemo', 'MATCH', 'N/A', 'file://qtdemo-init', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt-demo-init,0.1,INVALID,MIT,base,r3,None,unknown,None,MATCH, update-rc.d-native,Init script for qtdemo,N/A,file://qtdemo-init,Paul Eggleton <paul.eggleton@linux.intel.com>)
['vte', '0.28.2', '0.34.7', 'LGPLv2.1+', 'base', 'unknown', 'r6', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gtk+ intltool-native ncurses gobject-introspection-stub gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info gtk-doc-stub-native', 'https://bugzilla.gnome.org/buglist.cgi?product=vte', 'None', 'vte is a virtual terminal emulator', 'UPDATE', 'N/A', 'http://ftp.gnome.org/pub/GNOME/sources/vte/0.28/vte-0.28.2.tar.bz2;name=archive', 'Saul Wold <sgw@linux.intel.com>', 'Pending Glib-2.0 Update']
inserted (vte,0.28.2,0.34.7,LGPLv2.1+,base,r6,None,unknown,https://bugzilla.gnome.org/buglist.cgi?product=vte,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc glib-2.0 gtk+ intltool-native ncurses gobject-introspection-stub gnome-common-native hicolor-icon-theme gtk-update-icon-cache-native gconf gconf-native shared-mime-info-native shared-mime-info gtk-doc-stub-native,vte is a virtual terminal emulator,N/A,http://ftp.gnome.org/pub/GNOME/sources/vte/0.28/vte-0.28.2.tar.bz2;name=archive,Saul Wold <sgw@linux.intel.com>)
['libgcrypt', '1.5.2', '1.5.2', 'GPLv2+ & LGPLv2.1+', 'libs', 'http://directory.fsf.org/project/libgcrypt/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libgpg-error libcap', 'https://bugs.g10code.com/gnupg/index', 'None', 'A general purpose cryptographic library based on the code from GnuPG', 'MATCH', 'N/A', 'ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.2.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libgcrypt,1.5.2,1.5.2,GPLv2+ & LGPLv2.1+,libs,r0,None,http://directory.fsf.org/project/libgcrypt/,https://bugs.g10code.com/gnupg/index,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libgpg-error libcap,A general purpose cryptographic library based on the code from GnuPG,N/A,ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.2.tar.gz,Saul Wold <sgw@linux.intel.com>)
['gst-plugins-gl', '0.10.3', '0.10.3', 'GPLv2+ & LGPLv2+ & LGPLv2.1+ ', 'multimedia', 'http://gstreamer.freedesktop.org/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base virtual/libgles2 virtual/egl jpeg gconf gconf-native', 'https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer', 'None', 'Plugins for GStreamer', 'MATCH', 'N/A', 'http://gstreamer.freedesktop.org/src/gst-plugins-gl/gst-plugins-gl-0.10.3.tar.bz2', 'None', 'None']
inserted (gst-plugins-gl,0.10.3,0.10.3,GPLv2+ & LGPLv2+ & LGPLv2.1+ ,multimedia,r0,None,http://gstreamer.freedesktop.org/,https://bugzilla.gnome.org/enter_bug.cgi?product=Gstreamer,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer gst-plugins-base virtual/libgles2 virtual/egl jpeg gconf gconf-native,Plugins for GStreamer,N/A,http://gstreamer.freedesktop.org/src/gst-plugins-gl/gst-plugins-gl-0.10.3.tar.bz2,None)
['xcursor-transparent-theme', '0.1.1', '0.1.1', 'GPLv2', 'x11/base', 'http://www.matchbox-project.org/', 'r4', 'autoconf-native automake-native libtool-native gnu-config-native ', 'http://bugzilla.openedhand.com/', 'None', 'Transparent xcursor theme for handheld systems', 'MATCH', 'N/A', 'http://downloads.yoctoproject.org/releases/matchbox/utils/xcursor-transparent-theme-0.1.1.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xcursor-transparent-theme,0.1.1,0.1.1,GPLv2,x11/base,r4,None,http://www.matchbox-project.org/,http://bugzilla.openedhand.com/,MATCH,autoconf-native automake-native libtool-native gnu-config-native ,Transparent xcursor theme for handheld systems,N/A,http://downloads.yoctoproject.org/releases/matchbox/utils/xcursor-transparent-theme-0.1.1.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['libpcap', '1.4.0', '1.4.0', 'BSD', 'libs/network', 'http://www.tcpdump.org/', 'r5.0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native libnl bluez4', 'http://sourceforge.net/tracker/?group_id=53067&atid=469577', 'None', 'Libpcap provides a portable framework for low-level network monitoring. Libpcap can provide network statistics collection, security monitoring and network debugging.', 'MATCH', 'N/A', 'http://www.tcpdump.org/release/libpcap-1.4.0.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (libpcap,1.4.0,1.4.0,BSD,libs/network,r5.0,None,http://www.tcpdump.org/,http://sourceforge.net/tracker/?group_id=53067&atid=469577,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native libnl bluez4,Libpcap provides a portable framework for low-level network monitoring. Libpcap can provide network statistics collection, security monitoring and network debugging.,N/A,http://www.tcpdump.org/release/libpcap-1.4.0.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['libxkbcommon', '0.3.1', '0.3.1', 'MIT & MIT-style', 'base', 'http://www.xkbcommon.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros flex-native bison-native', 'None', 'None', 'libxkbcommon is a keymap compiler and support library which processes a reduced subset of keymaps as defined by the XKB specification.', 'MATCH', 'N/A', 'http://xkbcommon.org/download/libxkbcommon-0.3.1.tar.xz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libxkbcommon,0.3.1,0.3.1,MIT & MIT-style,base,r0,None,http://www.xkbcommon.org,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros flex-native bison-native,libxkbcommon is a keymap compiler and support library which processes a reduced subset of keymaps as defined by the XKB specification.,N/A,http://xkbcommon.org/download/libxkbcommon-0.3.1.tar.xz,Saul Wold <sgw@linux.intel.com>)
['liba52', '0.7.4', '0.7.4', 'GPLv2+', 'libs', 'http://liba52.sourceforge.net/', 'r4', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Library for reading some sort of media format.', 'MATCH', 'N/A', 'http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (liba52,0.7.4,0.7.4,GPLv2+,libs,r4,None,http://liba52.sourceforge.net/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Library for reading some sort of media format.,N/A,http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['gcc-crosssdk-initial', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', ' virtual/i586-pokysdk-linux-binutils-crosssdk gettext-native mpfr-native gmp-native libmpc-native zlib-native', 'None', 'None', 'The GNU cc and gcc C compilers.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc-crosssdk-initial,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH, virtual/i586-pokysdk-linux-binutils-crosssdk gettext-native mpfr-native gmp-native libmpc-native zlib-native,The GNU cc and gcc C compilers.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['sysstat', '10.1.6', '10.1.6', 'GPLv2+', 'console/utils', 'http://sebastien.godard.pagesperso-orange.fr/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'The sysstat utilities are a collection of performance monitoring tools for Linux.', 'MATCH', 'N/A', 'http://pagesperso-orange.fr/sebastien.godard/sysstat-10.1.6.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (sysstat,10.1.6,10.1.6,GPLv2+,console/utils,r0,None,http://sebastien.godard.pagesperso-orange.fr/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,The sysstat utilities are a collection of performance monitoring tools for Linux.,N/A,http://pagesperso-orange.fr/sebastien.godard/sysstat-10.1.6.tar.gz,Saul Wold <sgw@linux.intel.com>)
['qt4-native', '4.8.5', '4.8.5', 'LGPLv2.1 | GPLv3', 'libs', 'http://qt-project.org/', 'r0', ' zlib-native dbus-native', 'None', 'None', 'Native version of Qt/[X11|Mac|Embedded]', 'MATCH', 'N/A', 'http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt4-native,4.8.5,4.8.5,LGPLv2.1 | GPLv3,libs,r0,None,http://qt-project.org/,None,MATCH, zlib-native dbus-native,Native version of Qt/[X11|Mac|Embedded],N/A,http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['autogen-native', '5.17.4', '5.17.4-5', 'GPLv3', 'devel', 'http://www.gnu.org/software/autogen/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native guile-native libtool-native libxml2-native', 'None', 'None', 'AutoGen is a tool designed to simplify the creation and maintenance of programs that contain large amounts of repetitious text. It is especially valuable in programs that have several blocks of text that must be kept synchronized.', 'UPDATE', 'N/A', 'ftp://ftp.gnu.org/gnu/autogen/rel5.17.4/autogen-5.17.4.tar.gz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (autogen-native,5.17.4,5.17.4-5,GPLv3,devel,r0,None,http://www.gnu.org/software/autogen/,None,UPDATE,autoconf-native automake-native libtool-native gnu-config-native guile-native libtool-native libxml2-native,AutoGen is a tool designed to simplify the creation and maintenance of programs that contain large amounts of repetitious text. It is especially valuable in programs that have several blocks of text that must be kept synchronized.,N/A,ftp://ftp.gnu.org/gnu/autogen/rel5.17.4/autogen-5.17.4.tar.gz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['libnewt', '0.52.14', '0.52.14', 'LGPLv2', 'libs', 'https://fedorahosted.org/newt/', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc slang popt', 'None', 'None', 'Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. This package also contains the shared library needed by programs built with newt, as well as a /usr/bin/dialog replacement called whiptail. Newt is based on the slang library.', 'MATCH', 'N/A', 'https://fedorahosted.org/releases/n/e/newt/newt-0.52.14.tar.gz', 'Kai Kang <kai.kang@windriver.com>', 'None']
inserted (libnewt,0.52.14,0.52.14,LGPLv2,libs,r2,None,https://fedorahosted.org/newt/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc slang popt,Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. This package also contains the shared library needed by programs built with newt, as well as a /usr/bin/dialog replacement called whiptail. Newt is based on the slang library.,N/A,https://fedorahosted.org/releases/n/e/newt/newt-0.52.14.tar.gz,Kai Kang <kai.kang@windriver.com>)
['libical', '0.48', '0.48', 'LGPLv2.1 | MPL-1', 'libs', 'http://sourceforge.net/projects/freeassociation/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'http://sourceforge.net/tracker/?group_id=16077&atid=116077', 'None', 'iCal and scheduling (RFC 2445, 2446, 2447) library', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/project/freeassociation/libical/libical-0.48/libical-0.48.tar.gz', 'None', 'None']
inserted (libical,0.48,0.48,LGPLv2.1 | MPL-1,libs,r0,None,http://sourceforge.net/projects/freeassociation/,http://sourceforge.net/tracker/?group_id=16077&atid=116077,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,iCal and scheduling (RFC 2445, 2446, 2447) library,N/A,http://downloads.sourceforge.net/project/freeassociation/libical/libical-0.48/libical-0.48.tar.gz,None)
['libxxf86vm', '1.1.3', '1.1.3', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86vidmodeproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'libXxf86vm provides an interface to the XFree86-VidModeExtension extension, which allows client applications to get and set video mode timings in extensive detail. It is used by the xvidtune program in particular.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXxf86vm-1.1.3.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxxf86vm,1.1.3,1.1.3,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86vidmodeproto,libXxf86vm provides an interface to the XFree86-VidModeExtension extension, which allows client applications to get and set video mode timings in extensive detail. It is used by the xvidtune program in particular.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXxf86vm-1.1.3.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['bison', '2.7.1', '2.7.1', 'GPLv3', 'devel', 'http://www.gnu.org/software/bison/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison-native flex-native', 'None', 'None', 'Bison is a general-purpose parser generator that converts an annotated context-free grammar into an LALR(1) or GLR parser for that grammar. Bison is upward compatible with Yacc: all properly-written Yacc grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with little trouble.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/bison/bison-2.7.1.tar.xz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (bison,2.7.1,2.7.1,GPLv3,devel,r0,None,http://www.gnu.org/software/bison/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc bison-native flex-native,Bison is a general-purpose parser generator that converts an annotated context-free grammar into an LALR(1) or GLR parser for that grammar. Bison is upward compatible with Yacc: all properly-written Yacc grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with little trouble.,N/A,ftp://ftp.gnu.org/gnu/bison/bison-2.7.1.tar.xz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['zaurusd', '0.1+gitAUTOINC+85d941d87f', '0.1+gitAUTOINC+85d941d', 'GPLv2', 'base', 'unknown', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc tslib update-rc.d-native', 'None', 'None', 'Daemon to handle device specifc features.', 'MATCH', 'N/A', 'git://git.yoctoproject.org/zaurusd;protocol=git', 'Radu Moisan <radu.moisan@intel.com>', 'SVN rev 426 is last Stable release']
inserted (zaurusd,0.1+gitAUTOINC+85d941d87f,0.1+gitAUTOINC+85d941d,GPLv2,base,r0,None,unknown,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc tslib update-rc.d-native,Daemon to handle device specifc features.,N/A,git://git.yoctoproject.org/zaurusd;protocol=git,Radu Moisan <radu.moisan@intel.com>)
['gcc-cross-canadian-i586', '4.8.1', '4.8.1', 'GPL-3.0-with-GCC-exception & GPLv3', 'devel', 'http://www.gnu.org/software/gcc/', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native gettext-native nativesdk-gettext virtual/i586-poky-linux-gcc virtual/i586-pokysdk-linux-binutils-crosssdk virtual/nativesdk-i586-pokysdk-linux-libc-for-gcc nativesdk-gettext nativesdk-gmp nativesdk-mpfr nativesdk-libmpc nativesdk-elfutils chrpath-replacement-native', 'None', 'None', 'The cross-canadian GNU cc and gcc C compilers for i586 target.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (gcc-cross-canadian-i586,4.8.1,4.8.1,GPL-3.0-with-GCC-exception & GPLv3,devel,r0,None,http://www.gnu.org/software/gcc/,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native gettext-native nativesdk-gettext virtual/i586-poky-linux-gcc virtual/i586-pokysdk-linux-binutils-crosssdk virtual/nativesdk-i586-pokysdk-linux-libc-for-gcc nativesdk-gettext nativesdk-gmp nativesdk-mpfr nativesdk-libmpc nativesdk-elfutils chrpath-replacement-native,The cross-canadian GNU cc and gcc C compilers for i586 target.,N/A,ftp://ftp.gnu.org/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['makedevs', '1.0.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r7', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A tool to make device nodes', 'MATCH', '1.0.0', 'file://makedevs.c', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (makedevs,1.0.0,INVALID,GPLv2,base,r7,None,unknown,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A tool to make device nodes,1.0.0,file://makedevs.c,Radu Moisan <radu.moisan@intel.com>)
['ofono', '1.12', '1.12', 'GPLv2', 'base', 'http://www.ofono.org', 'r2', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 udev mobile-broadband-provider-info bluez4 update-rc.d-native', 'None', 'None', 'oFono is a stack for mobile telephony devices on Linux. oFono supports speaking to telephony devices through specific drivers, or with generic AT commands.', 'MATCH', '1.6', 'http://kernel.org/pub/linux/network/ofono/ofono-1.12.tar.xz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (ofono,1.12,1.12,GPLv2,base,r2,None,http://www.ofono.org,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus glib-2.0 udev mobile-broadband-provider-info bluez4 update-rc.d-native,oFono is a stack for mobile telephony devices on Linux. oFono supports speaking to telephony devices through specific drivers, or with generic AT commands.,1.6,http://kernel.org/pub/linux/network/ofono/ofono-1.12.tar.xz,Cristian Iorga <cristian.iorga@intel.com>)
['usbinit', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r3', ' update-rc.d-native', 'None', 'None', 'Initscript to manage gadget Ethernet', 'MATCH', 'n/a', 'file://usb-gether', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (usbinit,1.0,INVALID,GPLv2,base,r3,None,unknown,None,MATCH, update-rc.d-native,Initscript to manage gadget Ethernet,n/a,file://usb-gether,Radu Moisan <radu.moisan@intel.com>)
['libatomics-ops', '7.2', '7.2', 'GPLv2 & MIT', 'optional', 'http://www.hpl.hp.com/research/linux/atomic_ops/', 'r1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A library for atomic integer operations', 'MATCH', 'N/A', 'http://www.hpl.hp.com/research/linux/atomic_ops/download/libatomic_ops-7.2.tar.gz', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (libatomics-ops,7.2,7.2,GPLv2 & MIT,optional,r1,None,http://www.hpl.hp.com/research/linux/atomic_ops/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A library for atomic integer operations,N/A,http://www.hpl.hp.com/research/linux/atomic_ops/download/libatomic_ops-7.2.tar.gz,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['xkeyboard-config', '2.9', '2.9', 'MIT & MIT-style', 'x11/libs', 'http://freedesktop.org/wiki/Software/XKeyboardConfig', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc intltool-native virtual/gettext', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xkeyboard-config', 'None', 'The non-arch keyboard configuration database for X Window. The goal is to provide the consistent, well-structured, frequently released open source of X keyboard configuration data for X Window System implementations. The project is targeted to XKB-based systems.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/data/xkeyboard-config/xkeyboard-config-2.9.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xkeyboard-config,2.9,2.9,MIT & MIT-style,x11/libs,r0,None,http://freedesktop.org/wiki/Software/XKeyboardConfig,https://bugs.freedesktop.org/enter_bug.cgi?product=xkeyboard-config,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc intltool-native virtual/gettext,The non-arch keyboard configuration database for X Window. The goal is to provide the consistent, well-structured, frequently released open source of X keyboard configuration data for X Window System implementations. The project is targeted to XKB-based systems.,N/A,http://xorg.freedesktop.org/releases/individual/data/xkeyboard-config/xkeyboard-config-2.9.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['x11vnc', '0.9.13', '0.9.13', 'GPLv2+', 'x11/utils', 'http://www.karlrunge.com/x11vnc/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc openssl virtual/libx11 libxext avahi jpeg zlib', 'None', 'None', 'Export your X session on-the-fly via VNC', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/libvncserver/x11vnc/0.9.13/x11vnc-0.9.13.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (x11vnc,0.9.13,0.9.13,GPLv2+,x11/utils,r0,None,http://www.karlrunge.com/x11vnc/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc openssl virtual/libx11 libxext avahi jpeg zlib,Export your X session on-the-fly via VNC,N/A,http://downloads.sourceforge.net/libvncserver/x11vnc/0.9.13/x11vnc-0.9.13.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['nativesdk-qemu-helper', '1.0', 'INVALID', 'GPLv2', 'base', 'unknown', 'r9', 'virtual/nativesdk-i586-pokysdk-linux-compilerlibs chrpath-replacement-native virtual/i586-pokysdk-linux-gcc-crosssdk virtual/nativesdk-libc', 'None', 'None', 'Qemu helper scripts', 'MATCH', 'N/A', 'file:///srv/www/vhosts/packages.yoctoproject.org/poky/scripts/runqemu', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (nativesdk-qemu-helper,1.0,INVALID,GPLv2,base,r9,None,unknown,None,MATCH,virtual/nativesdk-i586-pokysdk-linux-compilerlibs chrpath-replacement-native virtual/i586-pokysdk-linux-gcc-crosssdk virtual/nativesdk-libc,Qemu helper scripts,N/A,file:///srv/www/vhosts/packages.yoctoproject.org/poky/scripts/runqemu,Saul Wold <sgw@linux.intel.com>)
['qt-mobility-x11', '1.2.0', '1.2.0', 'LGPLv2.1', 'x11/libs', 'http://qt-project.org/', 'r8', 'qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer util-linux pulseaudio bluez4', 'None', 'None', 'Qt Mobility 1.2.0 - version for Qt/X11', 'MATCH', 'N/A', 'http://get.qt.nokia.com/qt/add-ons/qt-mobility-opensource-src-1.2.0.tar.gz', 'Paul Eggleton <paul.eggleton@linux.intel.com>', 'None']
inserted (qt-mobility-x11,1.2.0,1.2.0,LGPLv2.1,x11/libs,r8,None,http://qt-project.org/,None,MATCH,qt4-tools-native qt4-x11 virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gstreamer util-linux pulseaudio bluez4,Qt Mobility 1.2.0 - version for Qt/X11,N/A,http://get.qt.nokia.com/qt/add-ons/qt-mobility-opensource-src-1.2.0.tar.gz,Paul Eggleton <paul.eggleton@linux.intel.com>)
['byacc', '20130304', '20130304', 'PD', 'devel', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'A parser generator utility that reads a grammar specification from a file and generates an LR(1) parser for it. The parsers consist of a set of LALR(1) parsing tables and a driver routine written in the C programming language.', 'MATCH', 'N/A', 'ftp://invisible-island.net/byacc/byacc-20130304.tgz', 'Bogdan Marinescu <bogdan.a.marinescu@intel.com>', 'None']
inserted (byacc,20130304,20130304,PD,devel,r0,None,unknown,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,A parser generator utility that reads a grammar specification from a file and generates an LR(1) parser for it. The parsers consist of a set of LALR(1) parsing tables and a driver routine written in the C programming language.,N/A,ftp://invisible-island.net/byacc/byacc-20130304.tgz,Bogdan Marinescu <bogdan.a.marinescu@intel.com>)
['dbus-wait', '0.1+gitAUTOINC+6cc6077a36', '0.1+gitAUTOINC+6cc6077', 'GPLv2', 'base', 'http://git.yoctoproject.org/cgit/cgit.cgi/dbus-wait', 'r2', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus', 'None', 'None', 'A simple tool to wait for a specific signal over DBus', 'MATCH', 'N/A', 'git://git.yoctoproject.org/dbus-wait;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (dbus-wait,0.1+gitAUTOINC+6cc6077a36,0.1+gitAUTOINC+6cc6077,GPLv2,base,r2,None,http://git.yoctoproject.org/cgit/cgit.cgi/dbus-wait,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc dbus,A simple tool to wait for a specific signal over DBus,N/A,git://git.yoctoproject.org/dbus-wait;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['linux-firmware', '0.0+gitAUTOINC+c530a75c1e', '0.0+gitAUTOINC+31f6b30', 'Proprietary', 'kernel', 'unknown', 'r1', ' virtual/update-alternatives', 'None', '1', 'Firmware files for use with Linux kernel', 'UPDATE', 'N/A', 'git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git;protocol=git', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (linux-firmware,0.0+gitAUTOINC+c530a75c1e,0.0+gitAUTOINC+31f6b30,Proprietary,kernel,r1,1,unknown,None,UPDATE, virtual/update-alternatives,Firmware files for use with Linux kernel,N/A,git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git;protocol=git,Cristian Iorga <cristian.iorga@intel.com>)
['libxxf86misc', '1.0.3', '1.0.3', 'MIT', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86miscproto', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The XFree86-Misc extension, provides a means to access input device configuration settings specific to the XFree86/Xorg DDX.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/libXxf86misc-1.0.3.tar.bz2', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (libxxf86misc,1.0.3,1.0.3,MIT,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros libxext xf86miscproto,The XFree86-Misc extension, provides a means to access input device configuration settings specific to the XFree86/Xorg DDX.,N/A,http://xorg.freedesktop.org/releases/individual/lib/libXxf86misc-1.0.3.tar.bz2,Constantin Musca <constantinx.musca@intel.com>)
['netbase', '5.1', '5.1', 'GPLv2', 'base', 'http://packages.debian.org/netbase', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', '1', 'This package provides the necessary infrastructure for basic TCP/IP based networking', 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.1.tar.gz', 'Cristian Iorga <cristian.iorga@intel.com>', 'None']
inserted (netbase,5.1,5.1,GPLv2,base,r0,1,http://packages.debian.org/netbase,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,This package provides the necessary infrastructure for basic TCP/IP based networking,N/A,ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.1.tar.gz,Cristian Iorga <cristian.iorga@intel.com>)
['rpm', '5.4.9', '5.4.11-0.20130708', 'LGPLv2.1', 'base', 'http://rpm5.org/', 'r63', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libpcre attr acl popt ossp-uuid file bison-native beecrypt bzip2 python zlib db openssl elfutils', 'None', 'None', 'The RPM Package Manager (RPM) is a powerful command line driven package management system capable of installing, uninstalling, verifying, querying, and updating software packages. Each software package consists of an archive of files along with information about the package like its version, a description, etc.', 'UPDATE', '5.4.10', 'http://www.rpm5.org/files/rpm/rpm-5.4/rpm-5.4.9-0.20120508.src.rpm;extract=rpm-5.4.9.tar.gz', 'Mark Hatle <mark.hatle@windriver.com>', 'None']
inserted (rpm,5.4.9,5.4.11-0.20130708,LGPLv2.1,base,r63,None,http://rpm5.org/,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libpcre attr acl popt ossp-uuid file bison-native beecrypt bzip2 python zlib db openssl elfutils,The RPM Package Manager (RPM) is a powerful command line driven package management system capable of installing, uninstalling, verifying, querying, and updating software packages. Each software package consists of an archive of files along with information about the package like its version, a description, etc.,5.4.10,http://www.rpm5.org/files/rpm/rpm-5.4/rpm-5.4.9-0.20120508.src.rpm;extract=rpm-5.4.9.tar.gz,Mark Hatle <mark.hatle@windriver.com>)
['xf86-input-synaptics', '1.7.1', '1.7.1', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto libxi mtdev', 'https://bugs.freedesktop.org', '2', 'synaptics is an Xorg input driver for the touchpads from Synaptics Incorporated. Even though these touchpads (by default, operating in a compatibility mode emulating a standard mouse) can be handled by the normal evdev or mouse drivers, this driver allows more advanced features of the touchpad to become available.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-input-synaptics-1.7.1.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-input-synaptics,1.7.1,1.7.1,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto libxi mtdev,synaptics is an Xorg input driver for the touchpads from Synaptics Incorporated. Even though these touchpads (by default, operating in a compatibility mode emulating a standard mouse) can be handled by the normal evdev or mouse drivers, this driver allows more advanced features of the touchpad to become available.,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-input-synaptics-1.7.1.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['cracklib', '2.9.0', '2.9.0', 'LGPLv2.1+', 'base', 'http://sourceforge.net/projects/cracklib', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cracklib-native zlib', 'None', 'None', 'A pro-active password checker library', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/cracklib/cracklib-2.9.0.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (cracklib,2.9.0,2.9.0,LGPLv2.1+,base,r0,None,http://sourceforge.net/projects/cracklib,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc cracklib-native zlib,A pro-active password checker library,N/A,http://downloads.sourceforge.net/cracklib/cracklib-2.9.0.tar.gz,Saul Wold <sgw@linux.intel.com>)
['ncurses', '5.9', '5.9', 'MIT', 'libs', 'http://www.gnu.org/software/ncurses/ncurses.html', 'r15.1', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses-native virtual/update-alternatives', 'None', 'None', 'SVr4 and XSI-Curses compatible curses library and terminfo tools including tic, infocmp, captoinfo. Supports color, multiple highlights, forms-drawing characters, and automatic recognition of keypad and function-key sequences. Extensions include resizable windows and mouse support on both xterm and Linux console using the gpm library.', 'MATCH', 'N/A', 'ftp://ftp.gnu.org/gnu/ncurses/ncurses-5.9.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (ncurses,5.9,5.9,MIT,libs,r15.1,None,http://www.gnu.org/software/ncurses/ncurses.html,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses-native virtual/update-alternatives,SVr4 and XSI-Curses compatible curses library and terminfo tools including tic, infocmp, captoinfo. Supports color, multiple highlights, forms-drawing characters, and automatic recognition of keypad and function-key sequences. Extensions include resizable windows and mouse support on both xterm and Linux console using the gpm library.,N/A,ftp://ftp.gnu.org/gnu/ncurses/ncurses-5.9.tar.gz,Saul Wold <sgw@linux.intel.com>)
['x11perf', '1.5.4', '1.5.4', 'MIT-X', 'x11/apps', 'http://www.x.org/', 'r8.0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxmu libxrender libxft libxext fontconfig', 'https://bugs.freedesktop.org', '1', 'The x11perf program runs one or more performance tests and reports how fast an X server can execute the tests.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/app/x11perf-1.5.4.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (x11perf,1.5.4,1.5.4,MIT-X,x11/apps,r8.0,1,http://www.x.org/,https://bugs.freedesktop.org,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros-native virtual/libx11 libxmu libxrender libxft libxext fontconfig,The x11perf program runs one or more performance tests and reports how fast an X server can execute the tests.,N/A,http://xorg.freedesktop.org/releases/individual/app/x11perf-1.5.4.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['cross-localedef-native', '2.18', '2.18', 'LGPL-2.1', 'libs', 'http://www.eglibc.org/home', 'r0', 'autoconf-native automake-native libtool-native gnu-config-native ', 'None', 'None', 'Cross locale generation tool for eglibc', 'MATCH', 'N/A', 'http://sakrah.dontexist.org/files/eglibc-2.18-svnr23532.tar.bz2', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (cross-localedef-native,2.18,2.18,LGPL-2.1,libs,r0,None,http://www.eglibc.org/home,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native ,Cross locale generation tool for eglibc,N/A,http://sakrah.dontexist.org/files/eglibc-2.18-svnr23532.tar.bz2,Saul Wold <sgw@linux.intel.com>)
['nfs-utils', '1.2.8', '1.2.8', 'MIT & GPLv2+ & BSD', 'console/network', 'http://nfs.sourceforge.net/', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libcap libnfsidmap libevent util-linux sqlite3 update-rc.d-native tcp-wrappers', 'None', 'None', 'The nfs-utils package provides a daemon for the kernel NFS server and related tools.', 'MATCH', 'N/A', 'http://kernel.org/pub/linux/utils/nfs-utils/1.2.8/nfs-utils-1.2.8.tar.bz2', 'Andrei Dinu <andrei.adrianx.dinu@intel.com>', 'None']
inserted (nfs-utils,1.2.8,1.2.8,MIT & GPLv2+ & BSD,console/network,r0,None,http://nfs.sourceforge.net/,None,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libcap libnfsidmap libevent util-linux sqlite3 update-rc.d-native tcp-wrappers,The nfs-utils package provides a daemon for the kernel NFS server and related tools.,N/A,http://kernel.org/pub/linux/utils/nfs-utils/1.2.8/nfs-utils-1.2.8.tar.bz2,Andrei Dinu <andrei.adrianx.dinu@intel.com>)
['libmad', '0.15.1b', '0.15.1b', 'GPLv2+', 'libs', 'http://sourceforge.net/projects/mad/', 'r3', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libid3tag', 'http://sourceforge.net/tracker/?group_id=12349&atid=112349', 'None', 'MPEG Audio Decoder Library', 'MATCH', 'N/A', 'http://downloads.sourceforge.net/mad/libmad-0.15.1b.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (libmad,0.15.1b,0.15.1b,GPLv2+,libs,r3,None,http://sourceforge.net/projects/mad/,http://sourceforge.net/tracker/?group_id=12349&atid=112349,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libid3tag,MPEG Audio Decoder Library,N/A,http://downloads.sourceforge.net/mad/libmad-0.15.1b.tar.gz,Saul Wold <sgw@linux.intel.com>)
['gtk+3', '3.8.2', '3.9.8', 'LGPLv2 & LGPLv2+ & LGPLv2.1+', 'libs', 'http://www.gtk.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native glib-2.0 cairo pango atk jpeg libpng gdk-pixbuf docbook-utils-native gdk-pixbuf-native glib-2.0-native gtk-doc-stub-native at-spi2-atk fontconfig libx11 libxext libxcursor libxi libxdamage libxrandr libxrender libxcomposite libxfixes wayland libxkbcommon virtual/update-alternatives', 'https://bugzilla.gnome.org/', 'None', 'GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off projects to complete application suites.', 'UPDATE', 'N/A', 'http://download.gnome.org/sources/gtk+/3.8/gtk+-3.8.2.tar.xz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (gtk+3,3.8.2,3.9.8,LGPLv2 & LGPLv2+ & LGPLv2.1+,libs,r0,None,http://www.gtk.org,https://bugzilla.gnome.org/,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc qemu-native glib-2.0 cairo pango atk jpeg libpng gdk-pixbuf docbook-utils-native gdk-pixbuf-native glib-2.0-native gtk-doc-stub-native at-spi2-atk fontconfig libx11 libxext libxcursor libxi libxdamage libxrandr libxrender libxcomposite libxfixes wayland libxkbcommon virtual/update-alternatives,GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off projects to complete application suites.,N/A,http://download.gnome.org/sources/gtk+/3.8/gtk+-3.8.2.tar.xz,Constantin Musca <constantinx.musca@intel.com>)
['sysprof', '1.2.0+gitAUTOINC+cd44ee6644', '1.2.0+gitAUTOINC+6901897', 'GPLv2', 'base', 'unknown', 'r0', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libglade', 'None', 'None', 'sysprof - System-wide Performance Profiler for Linux', 'UPDATE', 'N/A', 'git://git.gnome.org/sysprof;protocol=git', 'Tom Zanussi <tom.zanussi@intel.com>', 'None']
inserted (sysprof,1.2.0+gitAUTOINC+cd44ee6644,1.2.0+gitAUTOINC+6901897,GPLv2,base,r0,None,unknown,None,UPDATE,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc gtk+ libglade,sysprof - System-wide Performance Profiler for Linux,N/A,git://git.gnome.org/sysprof;protocol=git,Tom Zanussi <tom.zanussi@intel.com>)
['icon-naming-utils', '0.8.90', '0.8.90', 'GPLv2', 'base', 'unknown', 'r4', 'autoconf-native automake-native libtool-native gnu-config-native libxml-simple-perl-native perl-native', 'None', 'None', 'A Perl script used for maintaining backwards compatibility with current desktop icon themes, while migrating to the names specified in the Icon Naming Specification. The Icon Naming Utilities map the icon names used by the GNOME and KDE desktops to the icon names proposed in the Icon Naming Specification, and generate the icon files appropriate to the desktop environment you use. The Icon Naming Specification provides a standard list of common icon contexts and names that can be used to make icon themes work in a desktop environment or application that implements the naming specification. ', 'MATCH', 'N/A', 'http://tango.freedesktop.org/releases/icon-naming-utils-0.8.90.tar.gz', 'None', 'None']
inserted (icon-naming-utils,0.8.90,0.8.90,GPLv2,base,r4,None,unknown,None,MATCH,autoconf-native automake-native libtool-native gnu-config-native libxml-simple-perl-native perl-native,A Perl script used for maintaining backwards compatibility with current desktop icon themes, while migrating to the names specified in the Icon Naming Specification. The Icon Naming Utilities map the icon names used by the GNOME and KDE desktops to the icon names proposed in the Icon Naming Specification, and generate the icon files appropriate to the desktop environment you use. The Icon Naming Specification provides a standard list of common icon contexts and names that can be used to make icon themes work in a desktop environment or application that implements the naming specification. ,N/A,http://tango.freedesktop.org/releases/icon-naming-utils-0.8.90.tar.gz,None)
['libnl', '3.2.22', '3.2.22', 'LGPLv2.1', 'libs/network', 'http://www.infradead.org/~tgr/libnl/', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native', 'None', '1', 'libnl is a library for applications dealing with netlink sockets.', 'MATCH', 'N/A', 'http://www.infradead.org/~tgr/libnl/files/libnl-3.2.22.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'libnl-3.2.2 is incompatible with libnl2, so no Upgrade']
inserted (libnl,3.2.22,3.2.22,LGPLv2.1,libs/network,r0,1,http://www.infradead.org/~tgr/libnl/,None,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc flex-native bison-native,libnl is a library for applications dealing with netlink sockets.,N/A,http://www.infradead.org/~tgr/libnl/files/libnl-3.2.22.tar.gz,Saul Wold <sgw@linux.intel.com>)
['zlib', '1.2.8', '1.2.8', 'Zlib', 'libs', 'http://zlib.net/', 'r0', ' virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ', 'None', 'None', 'Zlib is a general-purpose, patent-free, lossless data compression library which is used by many different programs.', 'MATCH', 'N/A', 'http://www.zlib.net/zlib-1.2.8.tar.xz', 'Radu Moisan <radu.moisan@intel.com>', 'None']
inserted (zlib,1.2.8,1.2.8,Zlib,libs,r0,None,http://zlib.net/,None,MATCH, virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ,Zlib is a general-purpose, patent-free, lossless data compression library which is used by many different programs.,N/A,http://www.zlib.net/zlib-1.2.8.tar.xz,Radu Moisan <radu.moisan@intel.com>)
['xrestop', '0.4', '0.4', 'GPLv2+', 'x11/utils', 'http://www.freedesktop.org/wiki/Software/xrestop', 'r3', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxres libxext virtual/libx11', 'https://bugs.freedesktop.org/', 'None', 'top-like statistics of X11 server resource usage by clients', 'MATCH', 'N/A', 'http://downloads.yoctoproject.org/releases/xrestop/xrestop-0.4.tar.gz', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xrestop,0.4,0.4,GPLv2+,x11/utils,r3,None,http://www.freedesktop.org/wiki/Software/xrestop,https://bugs.freedesktop.org/,MATCH,autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc libxres libxext virtual/libx11,top-like statistics of X11 server resource usage by clients,N/A,http://downloads.yoctoproject.org/releases/xrestop/xrestop-0.4.tar.gz,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['xtrans', '1.2.7', '1.2.7', 'MIT & MIT-style', 'x11/libs', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros', 'https://bugs.freedesktop.org/enter_bug.cgi?product=xorg', '1', 'The X Transport Interface is intended to combine all system and transport specific code into a single place. This API should be used by all libraries, clients and servers of the X Window System. Use of this API should allow the addition of new types of transports and support for new platforms without making any changes to the source except in the X Transport Interface code.', 'MATCH', 'N/A', 'http://xorg.freedesktop.org/releases/individual/lib/xtrans-1.2.7.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xtrans,1.2.7,1.2.7,MIT & MIT-style,x11/libs,r0,1,http://www.x.org,https://bugs.freedesktop.org/enter_bug.cgi?product=xorg,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc util-macros,The X Transport Interface is intended to combine all system and transport specific code into a single place. This API should be used by all libraries, clients and servers of the X Window System. Use of this API should allow the addition of new types of transports and support for new platforms without making any changes to the source except in the X Transport Interface code.,N/A,http://xorg.freedesktop.org/releases/individual/lib/xtrans-1.2.7.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['resolvconf', '1.73', '1.73', 'GPLv2+', 'console/network', 'http://packages.debian.org/resolvconf', 'r0', ' ', 'None', 'None', "Resolvconf is a framework for keeping track of the system's information about currently available nameservers. It sets itself up as the intermediary between programs that supply nameserver information and programs that need nameserver information.", 'MATCH', 'N/A', 'ftp://ftp.debian.org/debian/pool/main/r/resolvconf/resolvconf_1.73.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (resolvconf,1.73,1.73,GPLv2+,console/network,r0,None,http://packages.debian.org/resolvconf,None,MATCH, ,Resolvconf is a framework for keeping track of the system's information about currently available nameservers. It sets itself up as the intermediary between programs that supply nameserver information and programs that need nameserver information.,N/A,ftp://ftp.debian.org/debian/pool/main/r/resolvconf/resolvconf_1.73.tar.gz,Saul Wold <sgw@linux.intel.com>)
['xf86-input-evdev', '2.8.0', '2.8.1', 'MIT-X', 'x11/drivers', 'http://www.x.org', 'r0', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto mtdev', 'https://bugs.freedesktop.org', '2', "evdev is an Xorg input driver for Linux's generic event devices. It therefore supports all input devices that the kernel knows about, including most mice and keyboards. The evdev driver can serve as both a pointer and a keyboard input device, and may be used as both the core keyboard and the core pointer. Multiple input devices are supported by multiple instances of this driver, with one Load directive for evdev in the Module section of your xorg.conf for each input device that will use this driver. ", 'UPDATE', 'N/A', 'http://xorg.freedesktop.org/releases/individual/driver/xf86-input-evdev-2.8.0.tar.bz2', 'Laurentiu Palcu <laurentiu.palcu@intel.com>', 'None']
inserted (xf86-input-evdev,2.8.0,2.8.1,MIT-X,x11/drivers,r0,2,http://www.x.org,https://bugs.freedesktop.org,UPDATE,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc virtual/xserver xproto randrproto util-macros inputproto kbproto mtdev,evdev is an Xorg input driver for Linux's generic event devices. It therefore supports all input devices that the kernel knows about, including most mice and keyboards. The evdev driver can serve as both a pointer and a keyboard input device, and may be used as both the core keyboard and the core pointer. Multiple input devices are supported by multiple instances of this driver, with one Load directive for evdev in the Module section of your xorg.conf for each input device that will use this driver. ,N/A,http://xorg.freedesktop.org/releases/individual/driver/xf86-input-evdev-2.8.0.tar.bz2,Laurentiu Palcu <laurentiu.palcu@intel.com>)
['avahi', '0.6.31', '0.6.31', 'GPLv2+ & LGPLv2.1+', 'network', 'http://avahi.org', 'r6.1', 'pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat libcap libdaemon dbus glib-2.0 intltool-native update-rc.d-native base-passwd shadow-native shadow-sysroot shadow', 'http://avahi.org/report', 'None', 'Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. This tool implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local Addresses" (IETF RFC3927), a protocol for automatic IP address configuration from the link-local 169.254.0.0/16 range without the need for a central server.', 'MATCH', '0.6.31', 'http://avahi.org/download/avahi-0.6.31.tar.gz', 'Constantin Musca <constantinx.musca@intel.com>', 'None']
inserted (avahi,0.6.31,0.6.31,GPLv2+ & LGPLv2.1+,network,r6.1,None,http://avahi.org,http://avahi.org/report,MATCH,pkgconfig-native autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/gettext gettext-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc expat libcap libdaemon dbus glib-2.0 intltool-native update-rc.d-native base-passwd shadow-native shadow-sysroot shadow,Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. This tool implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local Addresses" (IETF RFC3927), a protocol for automatic IP address configuration from the link-local 169.254.0.0/16 range without the need for a central server.,0.6.31,http://avahi.org/download/avahi-0.6.31.tar.gz,Constantin Musca <constantinx.musca@intel.com>)
['procps', '3.2.8', '3.2.8', 'GPLv2+ & LGPLv2+', 'base', 'http://procps.sf.net', 'r11', 'autoconf-native automake-native libtool-native libtool-cross gnu-config-native virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc ncurses virtual/update-alternatives', 'None', 'None', 'Procps contains a set of system utilities that provide system information about processes using the /proc filesystem. The package \\ includes the programs ps, top, vmstat, w, kill, and skill.', 'MATCH', 'N/A', 'http://procps.sourceforge.net/procps-3.2.8.tar.gz', 'Saul Wold <sgw@linux.intel.com>', 'None']
inserted (procps,3.2.8,3.2.8,GPL
This message has been truncated.


[Package Report System]Manual check recipes name list

Yocto Project Package Report System <package-reporting@...>
 

This mail was sent out by Package Report System.
It will list all the recipes which can't check upstream version by script, and will show how long it is since their last mannual version check.
You can check the detail information at http://packages.yoctoproject.org/manuallychkinfo


PackageName Version LastChkVersion LastChkTime Maintainer NoUpgradeReason
Manual Check Count: 0
Manual Need Check Count: 0
Any problem, please contact Saul Wold <sgw@linux.intel.com>


[PATCH] Fix QA Issue reported by running bitbake

Pier Luigi Fiorini <pierluigi.fiorini@...>
 

Fix the following error:
Variable ALLOW_EMPTY is set as not being package specific, please fix this.
---
recipes-security/tasks/task-core-selinux.bb | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/recipes-security/tasks/task-core-selinux.bb b/recipes-security/tasks/task-core-selinux.bb
index 05f8dfc..dda9c50 100644
--- a/recipes-security/tasks/task-core-selinux.bb
+++ b/recipes-security/tasks/task-core-selinux.bb
@@ -8,7 +8,7 @@ PACKAGES = "\
task-core-selinux \
"

-ALLOW_EMPTY = "1"
+ALLOW_EMPTY_${PN} = "1"

RDEPENDS_task-core-selinux = " \
ustr \
--
1.8.1.4


Re: Antwort: Re: [meta-intel] Boot failure when using meta-intel and meta-ivi

Tom Zanussi <tom.zanussi@...>
 

On Fri, 2013-07-26 at 09:48 +0200, Felix01 Fischer wrote:
Tom Zanussi <tom.zanussi@intel.com> schrieb am 25.07.2013 18:57:57:

Von: Tom Zanussi <tom.zanussi@intel.com>
An: Felix01 Fischer <felix01.fischer@iav.de>,
Kopie: yocto@yoctoproject.org, meta-intel@yoctoproject.org, genivi-
meta-ivi@lists.genivi.org
Datum: 25.07.2013 18:58
Betreff: Re: [meta-intel] Boot failure when using meta-intel and
meta-ivi

On Thu, 2013-07-25 at 11:00 +0200, Felix01 Fischer wrote:
Hi,
I haven written regarding this issues before. So maybe it sounds
familiar :-)

I'm unable to produce a booting image when combining a machine
from
the meta-intel layer with "DISTRO ?= "poky-ivi-systemd" from the
meta-ivi layer.
You will find a photograph of my screen attached, but I will
describe
the error anyway.


Which error do I get?

When I'm booting my image the machine fails to boot. The relevant
information (IMHO) are the lines:
/init: line 98: mount: not found
/init: line 98: mount: not found
/init: line 98: mount: not found
and
cat: can't open '/proc/cmdline': No such file or
directory
Waiting for removable media...


When does the error occur?

Every image built with the local.conf options
MACHINE ?= "crownbay" OR MACHINE ?= "chiefriver"
AND
DISTRO ?= "poky-ivi-systemd"

failed to boot.
I guess more information is needed to even build this. Using the
poky
commit id in the README, using either meta-intel/master or
meta-intel/dylan gives errors like this:

trz@elmorro:/usr/local/dev/yocto/ivi-test/build$ bitbake foton-image
Pseudo is not present but is required, building this first before
the
main build
Loading cache: 100% |###########################################|
ETA:
00:00:00
Loaded 1162 entries from dependency cache.
ERROR: No recipes available for:
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-extended/common-
api/dbus_1.6.10.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-core-ivi/dbus/
dbus_1.6.10.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-connectivity/
connman/connman_1.15.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-graphics/xorg-
xserver/xserver-xorg_1.14.0.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-core-ivi/busybox/
busybox_1.21.1.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-core-ivi/eglibc/
eglibc_2.18.bbappend
/usr/local/dev/yocto/ivi-test/meta-intel/meta-crownbay/recipes-
kernel/linux/linux-yocto-rt_3.8.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-qt/qt4/qt4-
embedded_4.8.5.bbappend
/usr/local/dev/yocto/ivi-test/meta-intel/common/recipes-graphics/
mesa/mesa_9.0.2.bbappend
/usr/local/dev/yocto/ivi-test/meta-ivi/recipes-core-ivi/netbase/
netbase_5.1.bbappend
ERROR: Command execution failed: Exited with 1

So, please supply the relevant commits for all layers used..
First, thank you for your help.
I guess your meta-ivi is not up to date. You have to "git checkout
4.0.2", which is the latest meta-ivi release
I have been building non-booting images for quite some time now using
various releases of poky, meta-intel and meta-ivi, so it shouldn't
rely on one special commit.
Currently I'm using "git checkout 4.0.2" for meta-ivi and the dylan
branch for poky and meta-intel aswell.
OK, with those commits, I was able to get a good build (the README is
also misleading about adding the INCOMPATIBLE_LICENSE line - it doesn't
build if you do what it says).

Anyway, from your error message:
/init: line 98: mount: not found

it can't find mount, which prompted me to look in the rootfs for 'mount'
and indeed it's not there, so that causes the init script to fail as
above.

The mount command isn't there because meta-ivi applies its own busybox
defconfig. From that defconfig, we can see that it excludes mount:

# CONFIG_MOUNT is not set

which is why the live image init script can't find mount and fails like
it does.

Removing the busybox_1.20.2.bbappend in the meta-ivi layer fixes the
problem - rebuilding after doing that I'm able to boot crownbay fine
with the meta-ivi layer applied.

Tom

The exact commits are (copied from the crownbay build):

Build Configuration:
BB_VERSION = "1.18.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "i586-oe-linux"
MACHINE = "crownbay"
DISTRO = "poky-ivi-systemd"
DISTRO_VERSION = "4.0.2"
TUNE_FEATURES = "m32 core2"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "dylan:64273e53f2789d2ea8393fc80909ac7086f168a7"
meta-ivi =
"(nobranch):f906b053e56c3aa009b29359ea12d2a7b8a25d57"
meta-intel
meta-crownbay = "dylan:048def7bae8e3e1a11c91f5071f99bdcf8e6dd16"
meta-qt5 = "dylan:806fedcc155e28ff1d802cf8d5af9c6d67c210c7"



I have tried builds with meta-ivi excalibur (not 100% sure) and
foton
releases and the master branch aswell
Similar applies to poky and meta-intel. I tried the danny and
dylan
releases and the master branch.

The boot happens from an USB stick on which I dd'ed
"foton-image-$MACHINE-$BUILDDATE.hddimg"

All other builds are booting fine.

Addind "EXTRA_IMAGE_FEATURE = "udev-extraconf" did not change this
behauviour.

Building only with meta-intel OR meta-ivi results in a booting
image.
Not sure what this means - if using only meta-ivi, which machine are
you
building?

if using only meta-ivi. I'm building Qemu images.
They have been booting fine all the time.



Tom


So, any ideas?

regards,

Viele Grüße

Felix Fischer

Studentischer Mitarbeiter (VC-D1)
Vehicle Cockpit Electronics Devices

IAV GmbH
Carnotstr. 1
10587 BERLIN
GERMANY

Phone: +49 30 39978-9540
Fax: +49 30 39978-9411
E-Mail: <mailto:felix01.fischer@iav.de>
Internet: http://www.iav.com

Sitz/Registered Office: Berlin,
Registergericht/Registration Court: Amtsgericht Charlottenburg,
Registernummer/Company Registration Number: HRB 21 280,
Geschäftsführer/Managing Directors: Kurt Blumenröder, Michael
Schubert, Dr. Rüdiger Goyk
_______________________________________________
meta-intel mailing list
meta-intel@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-intel


Setting up Perl modules

mulhern <mulhern@...>
 

Hi all,

Pulled pork is a Perl script for downloading rules for Snort. It has dependencies on a lot of little non-standard modules which in turn have dependencies, etc.

I believe that in theory the modules in the BUILD_REQUIRES variable in Makefile.PL corresponds to the modules that I should put in the DEPENDS variable in the corresponding bitbake recipe file. And the modules in the PREREQ_PM variable in Makefile.PL correspond to the modules that I should put in the RDEPENDS_${PN} variable in the recipe file. Could someone correct me if this is wrong, and if so, explain why?

Here's my second question. I will need to be able to have pulledpork.pl available to use during the installation of Snort. For this reason, I have given the pulledpork recipe and all the modules on which it depends a native variant. How can I be sure that pulledpork and all the modules on which it depends will be available for use in the directory for my build machine when building snort for my target machine? Should getting all the RDEPENDS_${PN} correct and putting pulledpork-native in the DEPENDS variable for Snort do it? Or must I do something else?

Thanks!

- mulhern


Re: Discovering available Perl modules OR writing recipes for your own

mulhern <mulhern@...>
 

I think the high level summary is:

1. You can look and see if the module is in open-embedded by checking at http://layers.openembedded.org/.
2. You're supposed to make a separate recipe for every little module.

- mulhern


On Sat, Jul 27, 2013 at 12:03 AM, Stewart, David C <david.c.stewart@...> wrote:
Did you get an answer? I'm not seeing it.

From: mulhern <mulhern@...>
Date: Wednesday, July 24, 2013 8:30 AM
To: "yocto@..." <yocto@...>
Subject: [yocto] Discovering available Perl modules OR writing recipes for your own

Hi all,

I'm working on a recipe for pullledpork, which is a Perl app which grabs and combines Snort rules from various sites.

My questions all revolve around pulledpork's various module dependencies.

pulledpork tries to use the module Crypt::SSLeay and in my current configuration it can't find it. It is very easy to write a little recipes that provides this module and forge ahead.

But I'm not sure that that is the correct thing to do...especially as it looks like I'll have to do the same thing for another ten or so tiny modules if I take that approach.

First, is there some way that I can find out whether that or any particular Perl module is provided by some recipe somewhere? My plan would be to RDEPEND on every available Perl module, forcing them all to be installed in the right place, run the pulledpork script, do the right think to provide any modules still missing until the script can actually complete, and then remove from RDEPENDS all previously included modules that don't show up a values in %INC. So far, so good, but I don't know how to even locate all the Perl modules that are already available.

Second, if the modules really are not available is there a better way to package them up than writing individual recipes for each and every missing module?

Third, are there naming conventions that should be followed? For example there is a recipe for liburi-perl that provides the very simply named Perl module URI.

Thanks!

- mulhern




Re: Discovering available Perl modules OR writing recipes for your own

David Stewart
 

Did you get an answer? I'm not seeing it.

From: mulhern <mulhern@gmail.com<mailto:mulhern@gmail.com>>
Date: Wednesday, July 24, 2013 8:30 AM
To: "yocto@yoctoproject.org<mailto:yocto@yoctoproject.org>" <yocto@yoctoproject.org<mailto:yocto@yoctoproject.org>>
Subject: [yocto] Discovering available Perl modules OR writing recipes for your own

Hi all,

I'm working on a recipe for pullledpork, which is a Perl app which grabs and combines Snort rules from various sites.

My questions all revolve around pulledpork's various module dependencies.

pulledpork tries to use the module Crypt::SSLeay and in my current configuration it can't find it. It is very easy to write a little recipes that provides this module and forge ahead.

But I'm not sure that that is the correct thing to do...especially as it looks like I'll have to do the same thing for another ten or so tiny modules if I take that approach.

First, is there some way that I can find out whether that or any particular Perl module is provided by some recipe somewhere? My plan would be to RDEPEND on every available Perl module, forcing them all to be installed in the right place, run the pulledpork script, do the right think to provide any modules still missing until the script can actually complete, and then remove from RDEPENDS all previously included modules that don't show up a values in %INC. So far, so good, but I don't know how to even locate all the Perl modules that are already available.

Second, if the modules really are not available is there a better way to package them up than writing individual recipes for each and every missing module?

Third, are there naming conventions that should be followed? For example there is a recipe for liburi-perl that provides the very simply named Perl module URI.

Thanks!

- mulhern


Re: Configuring Channels for Smart PM

Ash Charles <ashcharles@...>
 

Hi Paul,

Thanks very much for your help. This worked like a charm for me.

For future people searching:
- this didn't work (don't know why):
https://github.com/gumstix/meta-gumstix-extras/blob/02709f4fc5db1c4be6e5fc77e5e9630749a6daf7/recipes-devtools/python/python-smartpm/python-smartpm_1.4.1.bbappend

- this worked:
https://github.com/gumstix/meta-gumstix-extras/commit/acff007afffb19269e21bfd4cc1398fe23f00160

Hurrah!
--Ash

On Thu, Jul 25, 2013 at 2:24 AM, Paul Eggleton
<paul.eggleton@linux.intel.com> wrote:
Hi Ash,

On Wednesday 24 July 2013 18:59:30 Ash Charles wrote:
I'm looking to use a bbappend to add a repository/channel that the
smart package manager can use out of the box. For zypper, this was
just a question of adding a configuration file to the recipe.

How might I preconfigure Smart? The only way I've come up with so far
is a postinst 'smart channel --add....'
It does seem like Smart is geared more to configuration via the command line
rather than editing the configuration file directly.

One approach you could take would be to add a shell function to your image
recipe (or some class that multiple image recipes can inherit) that adds the
feeds, and trigger that from ROOTFS_POSTPROCESS_COMMAND; this would add the
feeds to your image when the image is generated. Something like this:


add_custom_smart_config() {
smart --data-dir=${IMAGE_ROOTFS}/var/lib/smart channel --add ... -y
}

ROOTFS_POSTPROCESS_COMMAND += "add_custom_smart_config ; "


It would be nice to have something built-in for this. I'll add it to my todo
list.

Cheers,
Paul

--

Paul Eggleton
Intel Open Source Technology Centre


Re: Build/install question

Gary Thomas
 

On 2013-07-26 10:15, Gary Thomas wrote:
One final tidy-up for my Amanda recipe. In do_install() I have:
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/vtapes/slot{1,2,3,4}
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/holding
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/state/{curinfo,log,index}

The problem I have is that /amanda and /amanda/holding end up with
the correct file owner/group, but the others (anything that has
multiple names) end up being owned by 'root'. When I install my package,
I get this on the target:
# ls -lR /amanda/
/amanda/:
total 3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 holding
drwxr-xr-x 5 root root 1024 Jul 26 15:44 state
drwxr-xr-x 6 root root 1024 Jul 26 15:44 vtapes

/amanda/holding:
total 0

/amanda/state:
total 3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 curinfo
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 index
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 log

/amanda/state/curinfo:
total 0

/amanda/state/index:
total 0

/amanda/state/log:
total 0

/amanda/vtapes:
total 4
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot1
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot2
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot4

/amanda/vtapes/slot1:
total 0

/amanda/vtapes/slot2:
total 0

/amanda/vtapes/slot3:
total 0

/amanda/vtapes/slot4:
total 0

Is this to be expected, or is it a bug? If so, where do I look
and/or report it?
A little experiment shows that the problem is only with the directories
that are implicitly created, e.g. /amanda/state/

Indeed, this seems to be how install works and bitbake is using the
native host version:

root@zeus:/tmp# install -d -m 0755 -o gthomas -g gthomas /tmp/this/is/a/long/dir/tree
root@zeus:/tmp# ls -lR /tmp/this
/tmp/this:
total 4
drwxr-xr-x 3 root root 4096 Jul 26 14:24 is

/tmp/this/is:
total 4
drwxr-xr-x 3 root root 4096 Jul 26 14:24 a

/tmp/this/is/a:
total 4
drwxr-xr-x 3 root root 4096 Jul 26 14:24 long

/tmp/this/is/a/long:
total 4
drwxr-xr-x 3 root root 4096 Jul 26 14:24 dir

/tmp/this/is/a/long/dir:
total 4
drwxr-xr-x 2 gthomas gthomas 4096 Jul 26 14:24 tree

/tmp/this/is/a/long/dir/tree:
total 0

All of the intermediate directories are owned by 'root', not
the designated owner.

Looks like I'll just work around this one...

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Build/install question

Gary Thomas
 

One final tidy-up for my Amanda recipe. In do_install() I have:
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/vtapes/slot{1,2,3,4}
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/holding
install -d -m 0777 -o amandabackup -g amandabackup ${D}/amanda/state/{curinfo,log,index}

The problem I have is that /amanda and /amanda/holding end up with
the correct file owner/group, but the others (anything that has
multiple names) end up being owned by 'root'. When I install my package,
I get this on the target:
# ls -lR /amanda/
/amanda/:
total 3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 holding
drwxr-xr-x 5 root root 1024 Jul 26 15:44 state
drwxr-xr-x 6 root root 1024 Jul 26 15:44 vtapes

/amanda/holding:
total 0

/amanda/state:
total 3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 curinfo
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 index
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 log

/amanda/state/curinfo:
total 0

/amanda/state/index:
total 0

/amanda/state/log:
total 0

/amanda/vtapes:
total 4
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot1
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot2
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot3
drwxr-xr-x 2 amandabackup amandabackup 1024 Jul 26 2013 slot4

/amanda/vtapes/slot1:
total 0

/amanda/vtapes/slot2:
total 0

/amanda/vtapes/slot3:
total 0

/amanda/vtapes/slot4:
total 0

Is this to be expected, or is it a bug? If so, where do I look
and/or report it?

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Re: Packaging questions

Gary Thomas
 

On 2013-07-26 09:52, Burton, Ross wrote:
On 26 July 2013 16:43, Gary Thomas <gary@mlbassoc.com> wrote:
One final packaging question. In my build I have these files:
/etc/amanda/
/etc/amanda/MyConfig/
/etc/amanda/MyConfig/tapelist
/etc/amanda/MyConfig/disklist
/etc/amanda/MyConfig/amanda.conf

I want the /etc/amanda/MyConfig to be packaged separately in "amanda-demo"
package.
PACKAGES += " ${PN}-demo "
FILES_${PN}-demo += " \
/etc/amanda/MyConfig/ \
/amanda \
"
FILES_${PN} += "${libdir} \
${libexecdir}/amanda/* \
/var/amanda \
/etc/amanda \
"

Sadly, the /etc/amanda/MyConfig tree is ending up in the main package. How
can I stratify it the way I want?
Various things interacting explain this. Package takes files in the
order that they appear in PACKAGES, so by using += you're *appending*
amanda-demo to PACKAGES, so it's at the end. FILES_$PN defaults to a
long list of "useful" paths, including ${sysconfdir}.

So, two options, both of which will work:

1) prepend amanda-demo to PACKAGES, so it gets to take files first. =+
is the prepend operator.
2) Change FILES_$PN to explictly set the entire value instead of
appending the default, then you can leave out $sysconfdir.
Option #1 is perfect and does just what I want, thanks!

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Re: It's a [PERL] lie...

Gary Thomas
 

On 2013-07-26 09:54, Burton, Ross wrote:
On 26 July 2013 16:49, Gary Thomas <gary@mlbassoc.com> wrote:
It turns out that PERL is the only package
that cares about this DISTRO_FEATURE and it builds incorrectly
if it's left out :-( Adding this feature back into my settings
made PERL build properly and now Amanda runs as well.
According to grep it's perl, cmake and libarchive that respect the
largefile feature.
Indeed, I missed them in my zeal :-( I new I was looking for something
that affected my problem, and perl was the key (I'm not using either
of the other packages)


If perl is known to break without largefile it's simple enough to make
it error when building if the feature isn't enabled, but to be honest
should we just remove this feature as it's so infrequently used?
I'd vote for at least fixing the perl recipe. The problem is insidious;
it only fails at runtime and then in mysterious ways... It also fails
on every architecture I tried (x86, ARM, PPC)

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Re: It's a [PERL] lie...

Ross Burton
 

On 26 July 2013 16:49, Gary Thomas <gary@mlbassoc.com> wrote:
It turns out that PERL is the only package
that cares about this DISTRO_FEATURE and it builds incorrectly
if it's left out :-( Adding this feature back into my settings
made PERL build properly and now Amanda runs as well.
According to grep it's perl, cmake and libarchive that respect the
largefile feature.

If perl is known to break without largefile it's simple enough to make
it error when building if the feature isn't enabled, but to be honest
should we just remove this feature as it's so infrequently used?

Ross


Re: Packaging questions

Ross Burton
 

On 26 July 2013 16:43, Gary Thomas <gary@mlbassoc.com> wrote:
One final packaging question. In my build I have these files:
/etc/amanda/
/etc/amanda/MyConfig/
/etc/amanda/MyConfig/tapelist
/etc/amanda/MyConfig/disklist
/etc/amanda/MyConfig/amanda.conf

I want the /etc/amanda/MyConfig to be packaged separately in "amanda-demo"
package.
PACKAGES += " ${PN}-demo "
FILES_${PN}-demo += " \
/etc/amanda/MyConfig/ \
/amanda \
"
FILES_${PN} += "${libdir} \
${libexecdir}/amanda/* \
/var/amanda \
/etc/amanda \
"

Sadly, the /etc/amanda/MyConfig tree is ending up in the main package. How
can I stratify it the way I want?
Various things interacting explain this. Package takes files in the
order that they appear in PACKAGES, so by using += you're *appending*
amanda-demo to PACKAGES, so it's at the end. FILES_$PN defaults to a
long list of "useful" paths, including ${sysconfdir}.

So, two options, both of which will work:

1) prepend amanda-demo to PACKAGES, so it gets to take files first. =+
is the prepend operator.
2) Change FILES_$PN to explictly set the entire value instead of
appending the default, then you can leave out $sysconfdir.

Ross


It's a [PERL] lie...

Gary Thomas
 

After three weeks, I've finally figured out why my PERL based
programs (Amanda in particular) don't run on my Poky/Yocto system.

I have my own distribution, derived from Poky, with some minor
tweaks. In particular, I have some reduced DISTRO_FEATURES(*).
One of them that I had removed, 'largefile', was the root cause
of my PERL problems. It turns out that PERL is the only package
that cares about this DISTRO_FEATURE and it builds incorrectly
if it's left out :-( Adding this feature back into my settings
made PERL build properly and now Amanda runs as well.

My point/query is that if this setting is only used by PERL *and*
leaving it out breaks things anyway, shouldn't it just be removed
and the PERL recipes changed to assume that it was set?

* Note: I made these changes years ago, when I was new to OE/Poky
and still quite naive, and I don't recall why I removed 'largefile'.

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Re: bitbake -c populate_sdk -v poky-image

Paul Eggleton
 

Hi Navani,

On Monday 22 July 2013 16:33:48 Navani Srivastava wrote:
I want to build meta-toolchain-qte.bb as sdk while running

"bitbake -c populate_sdk -v core-image-minimal" ..

Please suggest what changes need to be done to provide this feature?
At the moment you'll have to add something like the following to your image,
after the "inherit image" or "inherit core-image" line:

TOOLCHAIN_HOST_TASK += "nativesdk-packagegroup-qte-toolchain-host"

You'll also need to append to the toolchain environment setup script. See what
meta/recipes-qt/meta/meta-toolchain-qt.inc does and you should be able to do
the same in your image recipe.

(I'd like to make this easier at some point in future, so that this extra stuff
isn't needed.)

Cheers,
Paul

--

Paul Eggleton
Intel Open Source Technology Centre


Re: Adding a new target architecture

Paul Eggleton
 

Hi Michael,

On Saturday 20 July 2013 11:24:32 Michael Stickel wrote:
is there any documentation on how to add a new target architecture
(openrisc and sparc)?

The poky-handbook states in chapter 3. that it's not part of that
chapter and there is no other chapter explaining porting to a new
architecture.
We don't have specific documentation on new architectures, but it should just
be an extention of adding a BSP, so see the BSP guide for general stuff:

http://www.yoctoproject.org/docs/current/bsp-guide/bsp-guide.html

You may find the tune files in meta/conf/machine/include/ instructive as well;
you could also use some of the other BSP layers as examples since some of them
add support for architectures that aren't supported as part of the core.

Cheers,
Paul

--

Paul Eggleton
Intel Open Source Technology Centre


Re: Packaging questions

Gary Thomas
 

On 2013-07-24 08:38, Burton, Ross wrote:
On 24 July 2013 15:30, Gary Thomas <gary@mlbassoc.com> wrote:
ERROR: QA Issue: non -dev/-dbg/-nativesdk package contains symlink .so:
amanda path

'/work/armv7a-vfp-neon-amltd-linux-gnueabi/amanda/3.3.3-r0/packages-split/amanda/usr/lib/amanda/libamar.so'

I'm curious, what does the symlink point to? It's possible that we
can refine the check to reduce the number of false positives, because
this is a fairly common one that needs to be skipped.

The .so symlink points to a fully qualified library, e.g.
-rwxr-xr-x 1 gthomas gthomas 1383729 Jul 24 06:35 libamanda-3.3.3.so
lrwxrwxrwx 1 gthomas gthomas 18 Jul 24 06:35 libamanda.so ->
libamanda-3.3.3.so

The problem seems to be that this is the unqualified .so name and not a
version qualified name like 'libamanda.so.3'. The package isn't building
the version qualified names, just the fully unqualified one.



You can skip this QA test by setting INSANE_SKIP. In this case,
INSANE_SKIP_${PN} = "dev-so" (you can identify the tag to use by
looking through classes/insane.bbclass for the error message).
So that's not the pattern that the test was designed for (not that
it's actually implementing that design). I'm sure Amanda developers
have a reason for this, but the presence of a .so symlink in a non-dev
package is enough to trip this test, so INSANE_SKIP is the best thing
to do.
One final packaging question. In my build I have these files:
/etc/amanda/
/etc/amanda/MyConfig/
/etc/amanda/MyConfig/tapelist
/etc/amanda/MyConfig/disklist
/etc/amanda/MyConfig/amanda.conf

I want the /etc/amanda/MyConfig to be packaged separately in "amanda-demo" package.
PACKAGES += " ${PN}-demo "
FILES_${PN}-demo += " \
/etc/amanda/MyConfig/ \
/amanda \
"
FILES_${PN} += "${libdir} \
${libexecdir}/amanda/* \
/var/amanda \
/etc/amanda \
"

Sadly, the /etc/amanda/MyConfig tree is ending up in the main package. How
can I stratify it the way I want?

Thanks

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------


Re: Criteria for proposing a host distribution supported

Laszlo Papp <lpapp@...>
 

On Fri, Jul 26, 2013 at 12:21 PM, Burton, Ross <ross.burton@...> wrote:
On 26 July 2013 12:10, Laszlo Papp <lpapp@...> wrote:
> As far as I can tell, the reference documentation does not write that
> anywhere what you are claiming here. So you are either incorrect, or I need
> to file a bugreport to fix the documentation.

I'd say it's a fair assumption that when the documentation says
"supported on FooLinux" we mean "supported on a typical and working
installation of FooLinux".

Yeah, right, "fair assumption", Typical and working" .... Needless to mention that is relative without an absolute measure. It is a fair assumption that there is no "fair assumption" in here as people differ. :)
 
> No doubt a common "normal" could be found for Arch as well, which is what I
> have been referring to, in several emails of this thread now. I do not see
> Arch exclusive, respectively.

All Arch needs to be in the supported list is a long-term stable
release, and someone willing to do the testing.

You cannot test every variation, but that is generic, and not arch specific. However, what certain other projects do is they test a certain configuration (or range of that).

You're clearly
interested in being the latter, so when the former exists please say.

I already said because that is how I opened this thread.
 
Via Google I see there's been at least two attempts but nothing has
actually stuck around.

Well, there was the archserver project for that mean. Chakra was also freezing the core bits.

Laszlo