-----Original Message-----
From: Evade Flow [mailto:evadeflow@...]
Sent: Thursday, September 27, 2012 12:42 PM
To: Rifenbark, Scott M
Cc: yocto@...
Subject: Re: [yocto] build failure on current
I'm new to Yocto, but I've seen similar errors that seem to be due to
differences in the version of tar on the build server. Everything's
fine on this machine:
good% tar --version
tar (GNU tar) 1.26
but I get CRC errors sometimes on this one:
bad% otp-mmes-build% tar --version
tar (GNU tar) 1.22
The specific recipe I was having problems with was, I think,
perl-native. I couldn't untar/uncompress the perl archive in
build/downloads with tar 1.22, but it worked fine with tar 1.26. (I
don't have a solution, sorry. Around the same time I noticed this, I
found out that the image I was building was supposed to be built on
the denzil branch, so I just switched over to denzil and the problem
went away.)
On Thu, Sep 27, 2012 at 3:20 PM, Rifenbark, Scott M
<scott.m.rifenbark@...> wrote:
I am running through the build example for the QS and hit a failure when
trying to access git://git.yoctoproject.org/libowl;protocol=git. I started
with the tarball here: http://autobuilder.yoctoproject.org/nightly/CURRENT
Full transcript.
srifenbark@scottrif-desktop:~$ cd
poky-0b09e50810162a07ef0aecee91ee32b4a36334a3
srifenbark@scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3$
source oe-init-build-env
You had no conf/local.conf file. This configuration file has therefore been
created for you with some default values. You may wish to edit it to use a
different MACHINE (target hardware) or enable parallel build options to take
advantage of multiple cores for example. See the file for more information
as
common configuration options are commented.
The Yocto Project has extensive documentation about OE including a reference
manual
which can be found at:
http://yoctoproject.org/documentation
For more information about OpenEmbedded see their website:
http://www.openembedded.org/
You had no conf/bblayers.conf file. The configuration file has been created
for
you with some default values. To add additional metadata layers into your
configuration please add entries to this file.
The Yocto Project has extensive documentation about OE including a reference
manual
which can be found at:
http://yoctoproject.org/documentation
For more information about OpenEmbedded see their website:
http://www.openembedded.org/
### Shell environment set up for builds. ###
You can now run 'bitbake <target>'
Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support
You can also run generated qemu images with a command like 'runqemu qemux86'
srifenbark@scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
bitbake -k core-image-sato
Pseudo is not present but is required, building this first before the main
build
Parsing recipes: 100% |#########################################| Time:
00:00:48
Parsing of 825 .bb files complete (0 cached, 825 parsed). 1129 targets, 22
skipped, 0 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "i586"
TARGET_OS = "linux"
MACHINE = "qemux86"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120927"
TUNE_FEATURES = "m32 i586"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "<unknown>:<unknown>"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 63 tasks of which 0 didn't need to be rerun
and all succeeded.
Loading cache: 100% |###########################################| ETA:
00:00:00
Loaded 1130 entries from dependency cache.
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "i586"
TARGET_OS = "linux"
MACHINE = "qemux86"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120927"
TUNE_FEATURES = "m32 i586"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "<unknown>:<unknown>"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: validating kernel configuration
WARNING: The recipe is trying to install files into a shared area when those
files already exist. Those files are:
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/x86_64-linux/usr/share/sgml/openjade-1.3.2/catalog
WARNING: The recipe is trying to install files into a shared area when those
files already exist. Those files are:
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/include/python2.7/pyconfig.h
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so.1.0
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/python2.7/config/Makefile
WARNING: Failed to fetch URL git://git.yoctoproject.org/libowl;protocol=git,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 2, output:
gzip: stdin: invalid compressed data--crc error
gzip: stdin: invalid compressed data--length error
tar: Skipping to next header
tar: Child returned status 1
tar: Error is not recoverable: exiting now
ERROR: Function failed: Fetcher failure for URL:
'git://git.yoctoproject.org/libowl;protocol=git'. Unable to fetch URL from
any source.
ERROR: Logfile of failure stored in:
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/work/i586-poky-linux/libowl-0.1+git1+6ebc8ac8f8575278dd40a535cadefa26374e44b1-r0/temp/log.do_fetch.1973
ERROR: Task 2306
(/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5560 tasks of which 339 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
do_fetch
Summary: There were 3 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
srifenbark@scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
Scott Rifenbark
Intel Corporation
Yocto Project Documentation
503.712.2702
503.341.0418 (cell)
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
