Re: configuring WiFi in Yocto
Jim Abernathy
On Wed, Aug 29, 2012 at 7:46 AM, Burton, Ross <ross.burton@...> wrote:
I'm still having issues with WiFi.
iwconfig yields:
lo no wireless extensions
eth0 no wireless extensions
ifconfig yields:
eth0 Link encap:Ethernet HWaddr 00:22:4D:80:36:1F inet addr:10.0.1.57 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::222:4dff:fe80:361f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6478 (6.3 KiB) TX bytes:9592 (9.3 KiB) Interrupt:16 Memory:80400000-80420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Finally, dmesg is below:
Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.32-yocto-standard (jim@jim-ubuntu-x64) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 24 13:19:48 EDT 2012 Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (reserved) BIOS-e820: 0000000000090000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ee95000 (usable) BIOS-e820: 000000007ee95000 - 000000007eebf000 (reserved) BIOS-e820: 000000007eebf000 - 000000007eefc000 (usable) BIOS-e820: 000000007eefc000 - 000000007efbf000 (ACPI NVS) BIOS-e820: 000000007efbf000 - 000000007efef000 (usable) BIOS-e820: 000000007efef000 - 000000007efff000 (ACPI data) BIOS-e820: 000000007efff000 - 000000007f000000 (usable) BIOS-e820: 000000007f000000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.7 present. DMI: /DN2800MT, BIOS MTCDT10N.86A.0156.2012.0612.1547 06/12/2012 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f000 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F000000 mask FFF000000 uncachable 2 base 0FFE00000 mask FFFE00000 write-protect 3 disabled 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [c00fbe40] fbe40 initial memory mapped : 0 - 01c00000 Base memory trampoline at [c009a000] 9a000 size 16384 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 RAMDISK: 7e913000 - 7ee94000 Allocated new RAMDISK: 3727d000 - 377fd49d Move RAMDISK from 000000007e913000 - 000000007ee9349c to 3727d000 - 377fd49c ACPI: RSDP 000f2390 00024 (v02 INTEL ) ACPI: XSDT 7effe120 00064 (v01 INTEL DN2800MT 0000009C 01000013) ACPI: FACP 7eff6000 000F4 (v03 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: DSDT 7eff8000 05CA6 (v02 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: FACS 7ef85000 00040 ACPI: SSDT 7eff7000 0043E (v01 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: APIC 7eff5000 00084 (v02 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: MCFG 7eff4000 0003C (v01 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: HPET 7eff3000 00038 (v01 INTEL DN2800MT 0000009C MSFT 0100000D) ACPI: SSDT 7eff1000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT 7eff0000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 7efef000 0020F (v01 PmRef ApTst 00003000 INTL 20061109) ACPI: Local APIC address 0xfee00000 1144MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000010 -> 0x0000008f 0: 0x00000090 -> 0x0000009e 0: 0x00000100 -> 0x0007ee95 0: 0x0007eebf -> 0x0007eefc 0: 0x0007efbf -> 0x0007efef 0: 0x0007efff -> 0x0007f000 On node 0 totalpages: 519824 free_area_init_node: node 0, pgdat c1764d80, node_mem_map f629c200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2289 pages used for memmap HighMem zone: 290324 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 11 pages/cpu @f6264000 s23808 r0 d21248 u45056 pcpu-alloc: s23808 r0 d21248 u45056 alloc=11*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515759 Kernel command line: initrd=/initrd LABEL=boot root=/dev/ram0 console=ttyS0,115200 console=tty0 BOOT_IMAGE=/vmlinuz PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 allocated 8322816 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000377fe:0007f000) Memory: 2039596k/2080768k available (5160k kernel code, 39700k reserved, 2443k data, 500k init, 1170452k highmem) virtual kernel memory layout: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc176d000 - 0xc17ea000 ( 500 kB) .data : 0xc150a149 - 0xc176ce40 (2443 kB) .text : 0xc1000000 - 0xc150a149 (5160 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:512 CPU 0 irqstacks, hard=f540e000 soft=f5420000 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1866.928 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.85 BogoMIPS (lpj=7467712) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. ACPI: Core revision 20110413 ftrace: allocating 22266 entries in 44 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz stepping 01 Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU 1 irqstacks, hard=f54ba000 soft=f54bc000 Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 9a000 Initializing CPU#1 Disabled fast string operations CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 #2 smpboot cpu 2: start_ip = 9a000 Initializing CPU#2 Disabled fast string operations CPU 3 irqstacks, hard=f54d2000 soft=f54d4000 #3 Ok. smpboot cpu 3: start_ip = 9a000 Initializing CPU#3 Disabled fast string operations Brought up 4 CPUs Total of 4 processors activated (14933.91 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 7eebec18 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 7eebde18 001CF (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0x7fffffff] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] pci 0000:00:00.0: [8086:0bf2] type 0 class 0x000600 pci 0000:00:02.0: [8086:0be2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0x80600000-0x806fffff] pci 0000:00:02.0: reg 14: [io 0x40d0-0x40d7] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0x80800000-0x80803fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0x80704400-0x807047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf] pci 0000:00:1f.2: reg 14: [io 0x40dc-0x40df] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7] pci 0000:00:1f.2: reg 1c: [io 0x40d8-0x40db] pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f] pci 0000:00:1f.2: reg 24: [mem 0x80704000-0x807043ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200 pci 0000:01:00.0: reg 10: [mem 0x80400000-0x8041ffff] pci 0000:01:00.0: reg 14: [mem 0x80000000-0x803fffff] pci 0000:01:00.0: reg 18: [io 0x3000-0x301f] pci 0000:01:00.0: reg 1c: [mem 0x80420000-0x80423fff] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: [10ec:8176] type 0 class 0x000280 pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 18: [mem 0x80500000-0x80503fff 64bit] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 02-02] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 f 1f pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *9 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000008f000 - 000000000008ffff reserve RAM buffer: 000000000009e800 - 000000000009ffff reserve RAM buffer: 000000007ee95000 - 000000007fffffff reserve RAM buffer: 000000007eefc000 - 000000007fffffff reserve RAM buffer: 000000007efef000 - 000000007fffffff reserve RAM buffer: 000000007f000000 - 000000007fffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0x7f800000-0x7fffffff window] pnp 00:00: [mem 0x80000000-0xfebfffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xff000000-0xffffffff] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x004e-0x004f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x0680-0x069f] pnp 00:05: [io 0x1000-0x100f] pnp 00:05: [io 0xffff] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0400-0x047f] pnp 00:05: [io 0x0500-0x057f] pnp 00:05: [io 0x0600-0x061f] system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x1000-0x100f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x0600-0x061f] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x06a0-0x06af] pnp 00:06: [io 0x06b0-0x06ff] system 00:06: [io 0x06a0-0x06af] has been reserved system 00:06: [io 0x06b0-0x06ff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x0070-0x0077] pnp 00:07: [irq 8] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0378-0x037f] pnp 00:08: [irq 7] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) pnp 00:09: [io 0x02f8-0x02ff] pnp 00:09: [irq 3] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: [io 0x03f8-0x03ff] pnp 00:0a: [irq 4] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] pnp 00:0b: [mem 0x00000000-0x00003fff] pnp 00:0b: [mem 0x00000000-0x00000fff] pnp 00:0b: [mem 0x00000000-0x00000fff] pnp 00:0b: [mem 0x00000000-0xffffffff disabled] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0b: [mem 0x00000000-0x00003fff] could not be reserved system 00:0b: [mem 0x00000000-0x00000fff] could not be reserved system 00:0b: [mem 0x00000000-0x00000fff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.3: BAR 9: assigned [mem 0x80900000-0x80afffff 64bit pref] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80b00000-0x80cfffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff] pci 0000:00:1c.0: bridge window [mem 0x80b00000-0x80cfffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 02-02] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff] pci 0000:00:1c.3: bridge window [mem 0x80900000-0x80afffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0x80000000-0x804fffff] pci_bus 0000:01: resource 2 [mem 0x80b00000-0x80cfffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0x80500000-0x805fffff] pci_bus 0000:02: resource 2 [mem 0x80900000-0x80afffff 64bit pref] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000effff] pci_bus 0000:03: resource 9 [mem 0x000f0000-0x000fffff] pci_bus 0000:03: resource 10 [mem 0x7f800000-0x7fffffff] pci_bus 0000:03: resource 11 [mem 0x80000000-0xfebfffff] pci_bus 0000:03: resource 12 [mem 0xfed40000-0xfed44fff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.0: PCI INT A disabled pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1d.1: PCI INT B disabled pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.2: PCI INT C disabled pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1d.3: PCI INT D disabled pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.7: PCI INT A disabled PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5636k freed highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1708 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.3: setting latency timer to 64 intel_idle: MWAIT substates: 0x3020220 intel_idle: does not run on family 6 model 54 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x80704000 port 0x80704100 irq 19 ata2: SATA max UDMA/133 abar m1024@0x80704000 port 0x80704180 irq 19 ata3: DUMMY ata4: DUMMY e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:01:00.0: Disabling ASPM L0s e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts. Falling back to MSI interrupts. e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts. e1000e 0000:01:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:80:36:1f e1000e 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:01:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation console [netcon0] enabled netconsole: network logging started ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80704400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ata1: SATA link down (SStatus 0 SControl 300) uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Refined TSC clocksource calibration: 1866.732 MHz. Switching to clocksource tsc Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@... cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0 hda_codec: ALC888-VD: BIOS auto-probing. ALSA device list: #0: HDA Intel at 0x80800000 irq 22 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2012-08-29 12:44:16 UTC (1346244256) pvrsrvkm 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pvrsrvkm 0000:00:02.0: setting latency timer to 64 [TTM] Zone kernel: Available graphics memory: 437390 kiB. [TTM] Zone highmem: Available graphics memory: 1022616 kiB. [TTM] Initializing pool allocator. [drm:psb_driver_load] *ERROR* Enable MSI failed! [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. ACPI Warning: _BQC returned an invalid level (20110413/video-473) ata2: SATA link down (SStatus 0 SControl 300) acpi device:31: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) usb 1-5: new high speed USB device number 3 using ehci_hcd scsi4 : usb-storage 1-5:1.0 Overlay GTT address is 7c0000 usb 1-8: new high speed USB device number 4 using ehci_hcd hub 1-8:1.0: USB hub found hub 1-8:1.0: 4 ports detected usb 3-1: new full speed USB device number 2 using uhci_hcd hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected usb 1-8.3: new high speed USB device number 5 using ehci_hcd scsi 4:0:0:0: Direct-Access OCZ ATV_TURBO 1100 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 4:0:0:0: [sda] No Caching mode page present sd 4:0:0:0: [sda] Assuming drive cache: write through sd 4:0:0:0: [sda] No Caching mode page present sd 4:0:0:0: [sda] Assuming drive cache: write through sda: sda4 sd 4:0:0:0: [sda] No Caching mode page present sd 4:0:0:0: [sda] Assuming drive cache: write through sd 4:0:0:0: [sda] Attached SCSI removable disk usb 3-1.1: new full speed USB device number 3 using uhci_hcd input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 generic-usb 0003:413C:2002.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1/input0 input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 generic-usb 0003:413C:2002.0002: input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1/input1 usb 3-1.3: new low speed USB device number 4 using uhci_hcd fbcon: psbfb (fb0) is primary device input: Microsoft Microsoft Notebook Receiver v2.0 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 generic-usb 0003:045E:00E1.0003: input: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Receiver v2.0] on usb-0000:00:1d.1-1.3/input0 Console: switching to colour frame buffer device 170x48 fb0: psbfb frame buffer device drm: registered panic notifier Cedartrail: apply sample cache workaround Device ID: 2 [drm] Initialized pvrsrvkm 8.1.0 2009-03-10 for 0000:00:02.0 on minor 0 Freeing unused kernel memory: 500k freed udev[60]: starting version 164 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (loop0): using internal journal EXT3-fs (loop0): mounted filesystem with ordered data mode udev[502]: starting version 164 cfg80211: Calling CRDA to update world regulatory domain rtl8192ce 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 rtl8192ce 0000:02:00.0: setting latency timer to 64 rtl8192ce:rtl92c_init_sw_vars():<0-0> Failed to request firmware! rtlwifi:rtl_pci_probe():<0-0> Can't init_sw_vars. rtl8192ce 0000:02:00.0: PCI INT A disabled NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) eth0: no IPv6 routers present Ross |
|