On Mon, Jul 9, 2012 at 6:42 AM, Andrei Gherzan <andrei@...
> On Mon, Jul 9, 2012 at 1:39 PM, James Abernathy <jfabernathy@...
>> my goal of this test was to see if I could use the n450 BSP as a starting
>> point for a BSP to support my Acer Aspire One n450 based netbook. The
>> core-image-sato will boot from USB key on the netbook if I use the ZIP drive
>> format for the USB key, but the current n450 BSP doesn't include the drivers
>> for the networking hardware in the netbook.
>> I found by testing, using the menuconfig option documented in the
>> Developer Manual Appendix B example, that I needed to add 2 parameters to
>> the .config:
>> To make this change easier to manage and more permanent, I thought about
>> creating a config fragment. I put the config parameters in a file,
>> myconfig, in the linux-yocto directory at the same level as the
>> linux-yocto_3.2.bbappend file, where I added:
>> SRC_URI += "file//myconfig"
> Try to use myconfig.cfg.