On 06/26/2012 02:07 PM, Rifenbark, Scott M wrote: When I attempted to rebuild minimal I hit the same error you did Jim regarding kern-tools-native. This would be expected as Bruce pointed out that problem is alive in denzil. I am going to set the poky-extras branch to 'denzil' and retry that part of the example.
Scott
-----Original Message-----
From: yocto-bounces@... [mailto:yocto-bounces@...] On Behalf Of Rifenbark, Scott M
Sent: Tuesday, June 26, 2012 10:44 AM
To: Bruce Ashfield
Cc: yocto@...
Subject: Re: [yocto] Yocto Development Manual Appendix B question
I am on task 1507 of 1606 of a minimal build (from the example). No issues so far. I just finished testing with Denzil branch on poky and poky-extra. I made the Hello printk mods and used the new bbappend that Bruce setup in poky-extra for denzil. I think he had already uncommented the SRC_URI and all I had to do was put in the statement from the Appendix B about KSRC. and mod the bblayer.conf to include poky-extra. Everything compiled and worked as expected. Jim A -----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield@...]
Sent: Tuesday, June 26, 2012 10:42 AM
To: Rifenbark, Scott M
Cc: jfabernathy; yocto@...
Subject: Re: [yocto] Yocto Development Manual Appendix B question
On 12-06-26 12:30 PM, Rifenbark, Scott M wrote:
I am going to run through the B.1 example verbatim from the "current" version of the manual and see what happens. Fixing the license check was just a matter of me locking the SRCREV
for the tools to a value that works for denzil. I just pushed a denzil
branch to poky-extras that built and booted the yocto kernel for
me.
Cheers,
Bruce
Scott
-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield@...]
Sent: Tuesday, June 26, 2012 9:28 AM
To: Rifenbark, Scott M
Cc: jfabernathy; yocto@...
Subject: Re: [yocto] Yocto Development Manual Appendix B question
On 12-06-26 12:26 PM, Rifenbark, Scott M wrote:
This is a good point. In looking at the example it does not say what branch you should be dealing with for poky-extras. And I'm configuring a test right now and will create a denzil
branch, once I see it works.
Cheers,
Bruce
-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield@...]
Sent: Tuesday, June 26, 2012 9:24 AM
To: jfabernathy
Cc: Rifenbark, Scott M; yocto@...
Subject: Re: [yocto] Yocto Development Manual Appendix B question
On 12-06-26 12:11 PM, jfabernathy wrote:
On 06/26/2012 12:04 PM, Bruce Ashfield wrote:
On 12-06-26 12:00 PM, jfabernathy wrote:
On 06/26/2012 10:56 AM, Rifenbark, Scott M wrote:
Bruce,
Should the example note this? Would it be best to specifically say to
uncomment that SRC_URI line?
Scott I think some text needs to be added. I uncommented the SRC_URI line and
I still fail building the image. The failure is related to kernel tools:
ERROR: kern-tools-native: md5 data is not matching for
file://git/tools/kgit;beginline=5;endline=9;md5=e2bf4415f3d843f43d2e22b0d91a6fee
ERROR: kern-tools-native: The new md5 checksum is
d8d1d729a70cd5f52972f8884b80743d
ERROR: kern-tools-native: Check if the license information has
changed in
ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix
ERROR: Function failed: do_qa_configure This one is actually fixed on master, but poky-extras .. is just that
'extra', so this may still be alive in that repo.
This wouldn't need to be documented, since it's a bug/issue, and not
something that would persist.
What release are you pairing poky extras with ? I can always create a
branch to make sure they are consistent.
I was using Denzil because the snapshot noted in the example does not
exist. So there is another doc issue. Aha. In this case, we could note that the poky-extras repo branch should
match the main repository branch .. and I could ensure that meta-kernel-dev
works in that configuration.
That's likely the right solution, rather than forcing you to switch to
master (unless you want to :)
Cheers,
Bruce
I can always test on Master, but the docs need to be update to reflect
something that will work to completion without errors, IMHO.
Jim A
Cheers,
Bruce
Jim A
-----Original Message-----
From: yocto-bounces@...
[mailto:yocto-bounces@...] On Behalf Of Bruce Ashfield
Sent: Tuesday, June 26, 2012 7:54 AM
To: jfabernathy
Cc: yocto@...
Subject: Re: [yocto] Yocto Development Manual Appendix B question
On 12-06-26 10:52 AM, jfabernathy wrote:
In the example in The Developement Manual v1.2 in Appendix B Section
B.1.7, it states that you need to put in the statement:
KSRC_linux_yocto_3_2 ?="/home/scottrif/linux-yocto-3.2.git"
into the appropriate .bbappend file way now in the poky-extra
directory
structure. If I look at that file, |linux-yocto_3.2.bbappend| , I
seen a
SRC_URI line, immediately after our inserted KSRC statement, that is
commented out:
# SRC_URI =
"git://${KSRC_linux_yocto_3_2};protocol=file;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
Should that line be uncommented or is the SRC_URI already defaulted
somewhere to use the newly defined KSRC_linux_yocto_3_2 variable? It should be uncommented. I commented them by default, since the extras
repository is a bit of a collection ground. If they are uncommented,
and
combined with the AUTOREV also set in the file, you are forced to fix
all files, versus just the one you want.
Cheers,
Bruce
Jim A
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto _______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto
|
