Re: Try latest yocto adt script installer


Ke, Liping <liping.ke@...>
 

Liping,

All my changes are captured under:
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=jzhang/installer
OK.


My installation stopped at:

./yocto_installer_internal: line 165:
/opt/poky/0.9-post/sysroots/i586-pokysdk-linux//usr/bin/pseudo: No such
file
or directory
It's caused because you changed 0.9-post to 0.9+snapshot. The version is now
defined in the yocto_installer.conf.

Also, for solving the user priviledge problem, I will change user nfs root owner to $USER:$GROUP (lke:lke, eg).
Because we found opkg must run under root. Otherwise, the root folder will have to be changed. It will be not good.


Thanks& Regards,
criping





We'll sync later tonight...

Thanks,
Jessica
Ke, Liping wrote:
Hi, Jessica

For tracing the file, I temporarily checked in all needed files into
my branch:
http://git.pokylinux.org/cgit/cgit.cgi/poky-
contrib/log/?h=lke/adt_installer
_initial

If you have some modification on echo message, you can directly
change and submit the changes.
Since I am not sure about what kinds of echo message is most wanted
by user. I temporarily put
It under folder ${POKYBASE}/scripts/adt_installer

For testing, Lianhao temporarily make SDK_VERSION="0.9-post", it's
now defined in Yocto_installer.conf.

Thanks& Regards,
criping



-----Original Message-----
From: Ke, Liping
Sent: Tuesday, December 14, 2010 5:20 PM
To: Ke, Liping; Zhang, Jessica
Cc: yocto@...
Subject: RE: [yocto] Try latest yocto adt script installer

Hi, Jessica

I have updated the script and it is still put under http://llu-
piketon.sh.intel.com/installer.tar.

1. For util path problem, the solution is that we need to find the
dirname of running script, then cd to that folder.
2. For logfile, now I will output all detailed information to the
log file for tracing.
3. If environement-file is not there, error will be reported.
4. Add Error: prompt for errors.


Proxy should be disabled before testing.

I tested for both 32 bit and 64 bit host. Yet I am not sure whether
I
could cover all corner cases...
And Lianhao will easily cause hard-disk not responding when running
the script. Haven't root cause the problem. (My two test machine is
just fine) If you meet the same issue, please let us know.


Thanks& Regards,
criping


-----Original Message-----
From: yocto-bounces@... [mailto:yocto-
bounces@...] On Behalf Of Ke, Liping
Sent: Tuesday, December 14, 2010 2:40 PM
To: Zhang, Jessica
Cc: yocto@...
Subject: Re: [yocto] Try latest yocto adt script installer

Why we must run the script under the adt-installer directory?
Actually I tried to run under $HOME or / but specifying the full
path to yocto_installer, and got the error:
[ADT_INST] script file util is not found!
Oh, it's caused by the include grammar. I need to check how to
solve the relative path problem with include grammar in shell
script. It should not be difficult.


#############################################
# Meet error when installing Yocto ADT.
#############################################

2 comments here:
1. we should be able to allow user run the yocto_installer script
from any location and it should be able to locate the needed
surporting files or scripts
2. As a convention and to be consistent, I'd suggest change the
above error message as "[ADT_INST] Error: Script file util is not
found!" There're several error messages in the scripts has the
Error message format that I'm talking about here, which you can
look up as a reference.
No problem, I will unify all error messages.

3. Build log are located @ adt_installer/yoctoadt_installer.log
4. User config ( install which targets) are defined/changed in
Yocto_installer.conf. Note: now only i586 qemu rootfs are
available in repository.

Any problem, just let me know.
Just by playing with it, I change YOCTOADT_TARGETS="ppc" in
yocto_installer.conf. And the prompt that I got is as follows:

[ADT_INST] selected archs defined in Host Area Item:
YOCTOADT_TARGETS is not valid!
Error: Terminate installation process due to errors!
It's expected behavior. Since powerpcc is the correct name.


3. It would be nice to point out Host Area resides in which file,
and also tells user what are the valid entries

4. It's not consistent when existing the program when running into
errors, see the above and here just "Error: "...

During the Make opkg..., there're bunch of warning messages can we
redirect them to the log file?
Also, it seems the log file contents is less than what shows on
the screen (STDOUT), which I think should be the reverse case,
people should be able to trace more info in the log file? E.g.
during downloading rootfs, all the info where it download from and
saved to where are showed on the screen but missing in the log
file...
Log file problem is solved totally by replacing " >> " with "&>>"
pointed by Lianhao.


Toward the end of the installation, I run into:

[ADT_INST] Re-generate environment script file according to rootfs
location. Ls: cannot access
/opt/poky/0.9+snapshot-20101211/environment- setup- i586*: No such
file or directory
Sed: no input files
Missing guard will be added here.
I will send the updated scripts which will address most of the
problem.


Btw: I need someone review the script totally. I am afraid some of
the scripts Might not obey shell's world conventions since this is
the first script I wrote. I have to say I did try several blackbox
test yet failed to cover all corner problems.

Updated scripts will soon be published.

Thanks & Regards,
criping


_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto

Join yocto@lists.yoctoproject.org to automatically receive all group messages.