-----Original Message-----
From: Ke, Liping
Sent: Tuesday, December 14, 2010 5:20 PM
To: Ke, Liping; Zhang, Jessica
Cc: yocto@...
Subject: RE: [yocto] Try latest yocto adt script installer

Hi, Jessica

I have updated the script and it is still put under http://llu-
piketon.sh.intel.com/installer.tar.

1. For util path problem, the solution is that we need to find the
dirname of running script, then cd to that folder.
2. For logfile, now I will output all detailed information to the log
file for tracing.
3. If environement-file is not there, error will be reported.
4. Add Error: prompt for errors.


Proxy should be disabled before testing.

I tested for both 32 bit and 64 bit host. Yet I am not sure whether I
could cover all corner cases...
And Lianhao will easily cause hard-disk not responding when running the
script. Haven't root cause the problem. (My two test machine is just
fine)
If you meet the same issue, please let us know.


Thanks& Regards,
criping

-----Original Message-----
From: yocto-bounces@... [mailto:yocto-
bounces@...] On Behalf Of Ke, Liping
Sent: Tuesday, December 14, 2010 2:40 PM
To: Zhang, Jessica
Cc: yocto@...
Subject: Re: [yocto] Try latest yocto adt script installer

Why we must run the script under the adt-installer directory?

Actually

I
tried to run under $HOME or / but specifying the full path to
yocto_installer, and got the error:
[ADT_INST] script file util is not found!

Oh, it's caused by the include grammar. I need to check how to solve
the
relative path problem with include grammar in shell script. It should
not
be difficult.

#############################################
# Meet error when installing Yocto ADT.
#############################################

2 comments here:
1. we should be able to allow user run the yocto_installer script

from

any
location and it should be able to locate the needed surporting

files

or

scripts
2. As a convention and to be consistent, I'd suggest change the

above

error
message as "[ADT_INST] Error: Script file util is not found!"

There're

several error messages in the scripts has the Error message format

that

I'm
talking about here, which you can look up as a reference.

No problem, I will unify all error messages.

3. Build log are located @ adt_installer/yoctoadt_installer.log
4. User config ( install which targets) are defined/changed in
Yocto_installer.conf. Note: now only i586 qemu rootfs are

available

in repository.

Any problem, just let me know.

Just by playing with it, I change YOCTOADT_TARGETS="ppc" in
yocto_installer.conf. And the prompt that I got is as follows:

[ADT_INST] selected archs defined in Host Area Item:

YOCTOADT_TARGETS

is not
valid!
Error: Terminate installation process due to errors!

It's expected behavior. Since powerpcc is the correct name.

3. It would be nice to point out Host Area resides in which file,

and

also
tells user what are the valid entries

4. It's not consistent when existing the program when running into
errors,
see the above and here just "Error: "...

During the Make opkg..., there're bunch of warning messages can we
redirect
them to the log file?
Also, it seems the log file contents is less than what shows on the
screen
(STDOUT), which I think should be the reverse case, people should

be

able to
trace more info in the log file? E.g. during downloading rootfs,

all

the
info where it download from and saved to where are showed on the

screen

but
missing in the log file...

Log file problem is solved totally by replacing " >> " with "&>>"
pointed by Lianhao.

Toward the end of the installation, I run into:

[ADT_INST] Re-generate environment script file according to rootfs
location.
Ls: cannot access /opt/poky/0.9+snapshot-20101211/environment-

setup-

i586*:
No such file or directory
Sed: no input files

Missing guard will be added here.
I will send the updated scripts which will address most of the

problem.

Btw: I need someone review the script totally. I am afraid some of

the

scripts
Might not obey shell's world conventions since this is the first

script

I wrote.
I have to say I did try several blackbox test yet failed to cover all
corner problems.

Updated scripts will soon be published.

Thanks & Regards,
criping


_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto