1. Messages
  2. Skipping already-stripped check doesn't work

Re: Skipping already-stripped check doesn't work

Josef Holzmayr
 

As already pointed out on IRC, the only real solution is:
a) removing the shipped binaries from the install (as Khem also mentioned)
and b) making the module re-build the binaries using the cross
toolchain that the rest of the build also uses.

Greetz

Am Di., 12. Apr. 2022 um 00:26 Uhr schrieb Alessandro Tagliapietra
<tagliapietra.alessandro@...>:


Tested with updated honister branch, same error

--
Alessandro Tagliapietra


On Mon, Apr 11, 2022 at 2:41 PM Alessandro Tagliapietra <tagliapietra.alessandro@...> wrote:

I'm using honister (it's from a few months ago, I'm currently rebuilding using the latest commit)

On Mon, Apr 11, 2022 at 2:29 PM Khem Raj <raj.khem@...> wrote:

which release branch are you using?

On Mon, Apr 11, 2022 at 2:27 PM Alessandro Tagliapietra
<tagliapietra.alessandro@...> wrote:

Removing works, the build succeeded, however I can't test if it's actually needed by the package, I'll try that tomorrow.
Regarding file paths for example file linux-arm/node.napi.armv7.node is in these paths:

image/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node
packages-split/node-red-node-serialport/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node
npm-build/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node
package/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node
npm/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node

so it seems to be in node-red-node-serialport which is our package so INSANE_SKIP_${PN} += "already-stripped arch" should work.


On Mon, Apr 11, 2022 at 2:14 PM Khem Raj <raj.khem@...> wrote:



On Mon, Apr 11, 2022 at 1:43 PM Alessandro Tagliapietra <tagliapietra.alessandro@...> wrote:

On Mon, Apr 11, 2022 at 1:36 PM Khem Raj <raj.khem@...> wrote:


what package folders do you see under packages-split/ folder in your
build area for this recipe ?

The ones I've added in the INSANE_SKIP

ls -lah /home/alex/Projects/yocto/build/tmp/work/cortexa7t2hf-neon-vfpv4-poky-linux-gnueabi/node-red-node-serialport/1.0.1-r0/packages-split
total 32K
drwxr-xr-x 3 alex alex 4.0K Apr 11 13:23 node-red-node-serialport
drwxr-xr-x 3 alex alex 4.0K Apr 11 13:23 node-red-node-serialport-dbg
drwxr-xr-x 2 alex alex 4.0K Apr 11 13:23 node-red-node-serialport-dev
drwxr-xr-x 2 alex alex 4.0K Apr 6 16:04 node-red-node-serialport-doc
drwxr-xr-x 2 alex alex 4.0K Apr 6 16:04 node-red-node-serialport-locale
-rw-r--r-- 1 alex alex 57 Apr 6 16:04 node-red-node-serialport.shlibdeps
drwxr-xr-x 3 alex alex 4.0K Apr 11 13:23 node-red-node-serialport-src
drwxr-xr-x 2 alex alex 4.0K Apr 6 16:04 node-red-node-serialport-staticdev

Ok then next thing you want to check is where the reported stripped file is located and even if it does not work then perhaps look into removing these files if they are not needed
Join {yocto@lists.yoctoproject.org to automatically receive all group messages.