Re: Specified SDKMACHINE value is not valid


Khem Raj
 



On Fri, Apr 1, 2022 at 1:09 PM jchludzinski via lists.yoctoproject.org <jchludzinski=vivaldi.net@...> wrote:
I'm trying an experiment building yocto/OE on a Raspberry Pi 4 to host on the same RP4. Admittedly, a not practical platform for this purpose but it should work.

I'm trying to target the ARM ISA for the image using yocto-3.4.2. I've tried simply using the default setting and end up with:
 
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:
 
    Specified SDKMACHINE value is not valid
 

I've tried editing ./conf/local.conf:

MACHINE ?= "qemuarm64"

#MACHINE ??= "qemux86-64"


It’s complaining about SDKMACHINE setting which is a separate variable, can you check your local.conf if it’s set to something 

But this accomplishes nothing. Needless to say, I'm a yacto/OE newbie, so any suggestions would be greatly appreciated.

---John




Join yocto@lists.yoctoproject.org to automatically receive all group messages.