Re: looking to boot core-image-minimal on meta-riscv board


Khem Raj
 

On Fri, Feb 25, 2022 at 8:36 AM Robert P. J. Day <rpjday@...> wrote:


a friend of mine is diving into trying to boot linux on a meta-riscv
linux starter kit -- he's not using YP, and this is what he's
targeting:

https://www.aliexpress.com/item/1005003751298305.html

since i've wanted to jump into meta-riscv for a while, i figured i'd
play along and ordered something more substantial:

https://www.aliexpress.com/item/1005002796061251.html

in any event, here's the story so far.

as a first pass, i just fired up YP and built for qemuriscv64 to
establish a baseline, and that seems to work just fine, booting with
"runqemu nographic." and that at least gives me a bunch of config info
i can look at later.

as for my actual target board, i know that the meta-riscv layer
defines support for two boards, neither of which is the one i will be
getting, but while i'm waiting for it, i can at least start
documenting all of the relevant settings and config values i'll want
to try.

i know precious little about meta-riscv, so is there a sane way to
prepare for the eventual arrival of my board? my plan is to get
familiar with how the meta-riscv layer builds for the two supported
boards, so i'll have a handle on what i'll need to configure.

any further advice would be most appreciated.
We should add them to meta-riscv as reference BSPs. I have port
of unmatched locally and have been trying to get the needed changes
into meta-sifive which is still pending.



Join yocto@lists.yoctoproject.org to automatically receive all group messages.